make cabinet box (basic)

make cabinet box (basic)_VTP001

Рет қаралды 14,297

Күн бұрын

Пікірлер: 28

@boltup5566 9 ай бұрын

Finally! He teaches us something! Please do a video on installation...shimming, scribing, accounting for curves in the floor or walls. Thank you!

@espnmk Ай бұрын

Just can't have enough of these genius videos Thanks for Sharing.

@ukaszpauski179 9 ай бұрын

this is advice because you can see that the MDF is cracking - it is split by the screw. After using a drill with a chamfer, you should also use a regular drill and deepen the hole to the full length of the screw. And there are special screws for MDF ;) other than that, it's good work! :)

@vljfernandezlv 9 ай бұрын

what's that marking tool called? would like to get my hands on one of these. great video!

@deborahf3738 9 ай бұрын

I think this is a very important piece. It can be used a million different ways. Such a simple design that ranks high in versatility.....thanks.

@ahuachapan2 9 ай бұрын

Cool video. I prefer it with the back hiding the back cabinet support. Looks cleaner.

@jeanloreaud9282 9 ай бұрын

Simple et efficace,bravo,à bientôt salut Jeannot 🛠😉

@FuenzalidaRiverArt 9 ай бұрын

Gracias Mr ViTTEN!

@sain 7 ай бұрын

What drill bit size and screw size are using. Thanks

@ardypamungkas9505 9 ай бұрын

If not use middle stretcher, whats your another option for drawer?

@DmitryPetkov 9 ай бұрын

Just some friendly remarks from guy with 12 years experience in furniture making. Like your making and installing videos, but here this is how not to make cabinet in terms of material choice and joint technique. MDF is pretty bad material for joining into sidewall by screws since it's basically multiple layers of paper pressed and glued together. By screwing into sidewall you split layers and it wont hold for long. At 6:11 mark you can see splitted stretcher, same happend at all other joints. If you use MDF as your material of choice your best joint is eccentric coupler (rastex 15 or similar) paired with 8 mm wooden dowel. Yes, its more work to make properly all necessary holes, but it will last for life, especially if you glue dowel. Slotted backwall is nice, but seems like slot is too close to end of sidewall, plus stretcher is inside, so it doesnt help to support backwall from pushing it outside by accident. Should be at least 12 mm from end, plus you can hide stretcher behind backwall adding support for it in the middle. 12 mm thick stretcher can be mounted on 5 mm dowels. If you use same thickness board for stretcher, you will have 18 mm of space behind cabinet for usage, f.e. for wiring backlights or similar. Cheers and keep up good work.