Make Lots of Money This Spring with OMTech's Polar Laser

[@TCJ24116]

You guys are literally a source of inspiration 😊

[@luv2craft]

LOVE this. I have a Xtool D1 and have had it for over a year, I finally got it up and running now I am just experimenting with the settings. Your projects are always adorable and I have purchased several items from you, thanks so much for all the inspiration. Would love it if you did an Xtool project, pretty please? I love the idea of using a roller and putting them in plastic bags, what a great idea!

[@KimandGarrettmakeit]

Aw Thanks Lisa! We have some xTool projects coming up. We want to use it for a furniture makeover. Show us what you're making with your xTool! Thanks! ~garrett

[@ttowntshirts]

So rewatch it she got paint on her left sleeve when you guys were doing the back side. Lol I’m posting this comment before the videos done so you may say it at the end lol all in fun guys good job

[@loiserwin4364]

This is a really cute sign. For those that don't have saws and nailers to cut and screw the supports down, this 1 x 12 is a great option. Think you really nailed this one....pun intended....LOL🤣🤣🤣 Have a great weekend.

[@KimandGarrettmakeit]

😆 🤣 😂 I caught it! You hit that one on the head! (too forced? 😆) Thank you, Lous!!! ~garrett

[@loiserwin4364]

@@KimandGarrettmakeit You need spell check.....🤣🤣🤣 no -U- in my name👍

[@reneebanbury7066]

Such a cutie. I love gnomes! I wish I knew your schedule for when you get on KZbin because I am always late & my bell??? Who knows about my bell! Lol

[@KimandGarrettmakeit]

This week has been off schedule due to kid events. We go live every other Tuesday at 6pm EST, the other Tuesdays are What Happening Around The Shop and Fridays at 9am are for DIY Videos. Thanks, Re ee! ~garrett

[@anitacalivas8315]

I think that was a better way to paint!! Your kits are great for us non resellers because of the detail that we can take our time with…tfi ❤

[@KimandGarrettmakeit]

Thanks Anita! I bet you could make the flowers look really cool! Make em POP! ~garrett

[@lialhperez]

A suggestion on how to make smaller baggies. You can use a soldering tool to cut/seal the sandwich baggies into 2 smaller bags.

[@KimandGarrettmakeit]

Great IDEA! You always have great ideas! Thanks Lialh! ~garrett

[@danbailey96]

The first coat deal reminds of something that happened between My grandpa and his son my uncle ....they had a coat mine in West Virginia and one day as they was pushing out .a cart of coal...just the 2 of them and my grandpa says some SOB isn't pushing..and it's not me lol..my uncle pushed harder.

[@KimandGarrettmakeit]

😆 🤣 😂 Thanks Dan!

[@joyweber4659]

I love the leaner!

[@KimandGarrettmakeit]

Thank you, Joy! ! ~garrett

[@Cashe27]

God im so excited to get this machine, my business has taken off to insane new heights and my xtool cant keep up anymore, need something that can cut a lot quicker and it looks nicer too! ;)

[@sherrikay7]

OMG! I love gnomes!!

[@KimandGarrettmakeit]

Thanks, Sherri! ~garrett

[@karenraabis5296]

That was really nice!

[@KimandGarrettmakeit]

Thanks Karen!

[@inkyfeet12]

"Adequetly" (on the sign) -- did I miss something in the video referencing this? Like the new dimensions and design.

[@dnecey32]

I love love love this

[@KimandGarrettmakeit]

Thanks Denise!

[@christyh]

I'm looking to buy the OMtech Polar.. what did you guys use for smoke control/ air filtration? I have a workspace inside like yours.. would like to know how you vented this machine. Thanks!

[@stickerhoggz]

What do you do if the paint gets on the sides of the pieces? Do you just let it be, or do you also paint the sides?

[@vinnieromano1336]

No top coat? Won’t last in the weather but it will look good for a short while.

[@thebackyardgriller9076]

High there, what type of paint did you use? Great video!

[@KimandGarrettmakeit]

Sherwin Williams paint. Thanks!

[@thebackyardgriller9076]

@@KimandGarrettmakeit thank you, love d vids!

[@CraftyNanaOfFive]

Do you make projects anymore without use of the glowforge? I don't have one use to watch your channel for projects but not now you only use the glowfoge

[@karastainbrook6265]

So stinkin cute!!

[@KimandGarrettmakeit]

Thanks Kara!

[@andreasobiesiak3260]

How does the MDF hold up outside?

[@KimandGarrettmakeit]

It does pretty good as long as it's not directly in the rain. I have a few test signs out in the back parking lot, uncovered just bathing in the rain and sun. The oldest sign out there is from Last August and it did loose a few little pieces, but you don't notice until you get closer. We use Outdoor House paint to help seal them. Thanks! ~garrett

[@sufproducts]

Hi! Thank you for all the awesome tutorials. We actually just purchased the polar based on your positive feedback with the machine but having some difficulties. We've tried so many times to setup to replicate certain projects but doesn't work so easily as you guys did. Is there a way to contact you

[@tammygraves5757]

Love all your videos and projects. Can any of these be cut with an xtool DI Pro?

[@KimandGarrettmakeit]

Yes! We started making all of the rounds 16". For this gnome, you may have to shirk it a smidgen to get the hat to fit. The hat is a little over 17". Thanks, Tammy! ~garrett

[@tammygraves5757]

@@KimandGarrettmakeit - Thanks Garrett, When we try to cut a circle, we can only cut it 14”, should we be able to cut bigger?

[@cindyjackson4617]

This is great. I want to make one! What if you use the contact paper from the dollar tree instead of the painters tape to hold your pieces down while you paint them? It seems it might be less cost but not sure. Your thoughts? 😊

[@KimandGarrettmakeit]

Great Idea! We totally want to try it, but we forget about it any time we are in Dollar Tree. We need to make a trip just for that. Thanks Cindy! ~garrett

[@TCJ24116]

May I kindly ask if this would fit on a 7.5x48 inch board?

[@jessicarichardson3490]

Nice!!!

[@KimandGarrettmakeit]

Thanks, Jessica! ~garrett

[@jessicarichardson3490]

@@KimandGarrettmakeit welcome

[@wileycovington4497]

My laser isn't very big (Flux Beamo) and it doesn't use lightburn. Is there a work around?

[@KimandGarrettmakeit]

The SVGs should still work. I don't know the cutting area of the beamo but I am sure you could rearrange it or shrink it slightly. Thanks! ~garrett

[@wileycovington4497]

@Kim and Garrett make it it's 8 x 12. Thanks!

[@melodylecroix1291]

Where did you got the bottles for paint?? Could you include a link please

[@karastainbrook6265]

They have them listed in the description I believe

[@arkimble7]

Will this file be available for Patreons? 🤞

[@KimandGarrettmakeit]

Yes! It will be up there this morning! ~garrett

[@margaritalopez4144]

Replay. love the gnome.

[@KimandGarrettmakeit]

Thank you, Margarita! ~garrett

[@michelechantra8605]

I’ve been thinking about getting the xtool d1 and this is the first I’ve heard of this laser. Do you prefer it over the xtool?

[@KimandGarrettmakeit]

We've really liked this one~

[@annedirkes7893]

This is very cute

[@KimandGarrettmakeit]

Thanks Anne!

[@carolanne901]

I like it

[@KimandGarrettmakeit]

Thanks, Carol! ~garrett

[@kathyalford9076]

Have they ever explained how they got started doing this as a business?

[@debbieanderson398]

yes Kim was already crafty and Garrett was I believe laid off during covid. His background is graphic design so they started this and it took off.

[@KimandGarrettmakeit]

Hey, great job! That sums it up pretty well! Thanks, Friend! 😃 ~garrett

[@kathyalford9076]

@@debbieanderson398 thanks that explains it well - appreciate the response

[@joyweber4659]

Adequately

[@KimandGarrettmakeit]

😆 ~garrett

[@MrLelopes]

Soooo.... Yeah.. This one was sugested to me right after watching the froopland episode from Rick and Morty.... Yep.... This thumbnail seems wrong as heck.

[@carloscastanyeda]

Yo bro, make something manly all these laser chanels are all femmi.

[@KimandGarrettmakeit]

Hey Carlos! Kim picks our projects and she isn't very manly. If I had my way, everything would be BMX or bike related. Thanks! ~garrett