Make This Bowl with a Router and this Easy Jig!

[@chrislowther2615]

Ignore the negative comments. I don’t know why people just can’t move on if the content isn’t what they are looking for. You do have a nice workshop and yes you have a lot of tools. However it’s also a well thought out and well presented instructional video. Pretty much exactly what I was looking for and I will be giving this a try. Thanks for taking the time to put this together.

[@GTWoodshop]

Thanks Chris, yes I do have lots of lovely, wonderful tools, I love tools, who doesn't? 👍👍

[@PeeterJoot]

Love your circle cutting jig. Nice project -- I'd like to try this one myself.

[@ellmannvictor]

Well done sir. I have added this to my list of things that I want to make when I have time. I wish that people with negative comments will think twice before sharing. It is so unnecessary.

[@GTWoodshop]

Well said!

[@DaraHijazi]

Really it is one of the best ways to save wood, and to decrease waste!! Well done 👏

[@geoffreycoan]

Clever lateral thinking with using the router. Thanks!

[@AngieWilliamsDesigns]

Great bowl! I like the jig you used.

[@wiseoldfool]

Nice job! I'm looking forward to the circle cutting jig.

[@GTWoodshop]

Working on it. 👍

[@doozerakapuckfutin]

Beautiful bowl .

[@dennisfreitas7675]

Just came across your site great job I plan on getting the plans I want to try this 🤙🏼

[@moapictures]

Very nice tips and jig! Tnks!

[@vineyardguy8094]

Thank you! Great piece.

[@19youldon53]

Hi Graham Brilliant idea, I will definitely have a bash at this, heading over to etsy for plans, as always thanks for all the work bringing these fab videos David

[@GTWoodshop]

Hi David, thank you. 👍

[@GypsyLillies]

Gra, absolutely stunning and beautiful bowl..... great video :-)

[@GTWoodshop]

Thank you.

[@TeamProsperity]

Great video 👍nice method

[@johngunning2123]

Looks great! 👍

[@jameso.gulbransen7335]

Graham, received both sets of plans. Now, I need to clear some space & rearrange some projects so I’m ready when I get the jig hardware. I’m thinking the first one will be out of pine, as a learning bowl. Thanks for your videos, your knowledge, help & sharing this with the community.

[@GTWoodshop]

Thank you James, hope the bowl making goes well. let me know. 👍👍

[@JohnColgan.]

Advantages with this design, no endgrain, beautiful 360° of popped edge grain. And minimal wasteage!

[@seanelucero]

beautiful

[@rohanblues]

I just finished building the handrail on my deck kzbin.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z and used this great little router to clean up the top rail before the final sanding and stain. It was light weight but packed lots of power. Either size battery didn't seem to make it top heavy and I'm a 64 yr old women so I really appreciated how easy it was to use...................... CORDLESS only way to go !!

[@nathanpowell1500]

That came out great!

[@GTWoodshop]

Thanks Nathan 👍

[@patrickguyot1290]

Absolutly beautifull,im definitly following you! 😀👍🏻

[@jlssculpturedesign8140]

Nice job 👍

[@GTWoodshop]

Thanks 👍

[@SteveMonk1956]

Absolutely wonderful.

[@GTWoodshop]

Thanks Steve. 👍

[@runforrestrun1965]

Hmm, though it was gonna be a simple drill jig to make a small lathe and turn a bowl that way. Man, that’s some top line equipment used for a bowl.

[@jackferguson1225]

I love this video. I’ve made several router cut bowls but there is a huge waste of material that way. Could you please point me toward the plans you mentioned. Great work, your help is much appreciated!

[@johnmay371]

Nice work great job!

[@jolox.]

Very nice video! Was just dusting off my router to make a picture frame! Going to subscribe to see your tips!

[@GTWoodshop]

Thank you. 👍

[@vashroygrant1307]

Nice

[@vincentpotter5721]

I like the way you take time it’s nice work and safe

[@bigald9560]

Cool and impressive, but lathe turned is my preference

[@michaelhemelt3133]

love it

[@jejkobprodukcje9060]

Awesome!!!

[@GTWoodshop]

Thanks!! 👍

[@handyjim]

excellent

[@GTWoodshop]

Thanks Jim. 👍

[@alfredsanturri922]

Great job it looks beautiful when I go to Etsy for the plans what do I ask for

[@GTWoodshop]

Hi Alfred, thank you. 👍The link is in the description, it will take you directly to the page.

[@MarkLasbyCNC]

Graham, Thank you for the clear instructions in the Etsy file. I am from Canada but do not have metric guide bushings. I am trying to figure out how to convert the circle diameter dimensions for use with Imperial dimension guide bushings (3/4" OD 21/32" ID) and 1/2" router bit. I do not have a 1/2" router bit with a top bearing. What wall thickness is the bowl when you use the 278 mm diameter outer wall jig and 251 mm diameter inner wall jig? Based on the description the outside diameter of the bowl is 278mm. Is this correct? Mark

[@GTWoodshop]

Hi Mark, I'll measure a bowl and let you know. 👍

[@gregsarsons1221]

This is a great looking bowl, ash really does pop! The jig is ingenious. Not a criticism, it would be a bit more work: inset the bottom in a rebate so the seam doesn’t show on the side, add one more layer so you have three even layers. I wonder what claro walnut or zebra wood would look like?

[@JohnColgan.]

How do you match align the ends 1st & 8th piece? Or just rely on bland grain matching?

[@GTWoodshop]

A little thought when you choose the piece may help aleviate the issue, oh and some hope. 😁😁

[@carlosaugustosoutopimentel6779]

Muito bom show de bola 👏

[@charlessupplee2655]

Try using a hose clamp ehen uou glue up your pcs.

[@misohlavati]

All fine but why are you using table top thicknesser when you have the bigger and more reliable one?

[@GTWoodshop]

Its easier to use, I had it before the Hammer amd I'm lazy.

[@MrThenry1988]

What van you sell it for? Good work.

[@GTWoodshop]

They've been selling for £65. 👍

[@germantrader10]

8:18 epic!

[@GTWoodshop]

😁

[@wood_crafts_art]

What are the dimensions of this product?

[@jumpingjacks5558]

Great video, I don't know if you said what kind of wood you used and I missed it. What kind of wood did you use to make this bowl?

[@GTWoodshop]

Hi Jack, that was Ash, if memory serves. 👍

[@jumpingjacks5558]

Thank you so much @@GTWoodshop

[@topcheese2889]

Minimum tools? Which one didn’t you use? Nice piece though!

[@paulelliott6655]

Bowled over

[@GTWoodshop]

Ha! 😂

[@hudsonsoul1121]

What money would you get for it? Really nice and very simplistic.

[@TheWendyJohnson]

The joy is in the journey

[@hudsonsoul1121]

@@TheWendyJohnson For pleasure rather than profit.

[@jackelinecueto4098]

Bello

[@davidlaraia429]

Have a issue I bought your download and I never received anything from you

[@GTWoodshop]

Hi David, sorry about that, let me take a look for you.

[@GTWoodshop]

Hi David, Etsy says the plans have not been downloaded yet. When you purchased the plans Etsy would have sent a confirmation email, within that email there should be a link for you to click and download the plans. I'll send you a copy anyway. 👍

[@GTWoodshop]

Plans sent, should be in your Inbox David.

[@Alehar52]

Where are the plans how to make this bowl? There is a whole store, no plans. Good job

[@GTWoodshop]

Hi, here is the direct link: www.etsy.com/uk/listing/1401136935/full-detailed-plans-listing-every-step?ref=listings_manager_grid

[@ernestocabrera3971]

We save crap wood to make thing money wortg .Tks

[@colnelrandy]

Is that a bristol accent

[@GTWoodshop]

Hell no, a little further south.

[@malk1275]

Stunning new sub

[@idothings100]

Title should have been, make this bowl with a track saw, table saw, planer, fancy woodworking table, miter saw, plunge router, lots of different types of clamps, and a palm router.

[@GTWoodshop]

No track saws were used in the making of this bowl. 👍

[@idothings100]

@@GTWoodshop Uhh sir, you literally show a track saw cutting MDF in the first frame after your logo disappears, it's a Festool most likely.

[@DikkaDisc]

I'm sure you can do this with your Ryobi tools.

[@ConcreteLand]

@@idothings100 it’s a catchy and accurate name, you should write for these guys. 😂

[@TheWendyJohnson]

Geesh! Play nice. This bowl can absolutely be made using only a jigsaw, sander and router @@idothings100

[@vincechittenden]

Unbelievably complex and time-consuming procedure using loads of expensive woodworking machines to make a bowl that doesn't even look that good. The bottom is just glued on and looks ugly from the side. And who knows what will happen if this wood ever starts moving with change of moisture content - it probably won't look pretty. To save material you could have made a bowl with a bandsaw.

[@GTWoodshop]

Hi Vince, can't say I agree with you, but you are dead right on one point, I could of used a bandsaw. 😁

[@cecilsturge5984]

These people talk too much

[@GTWoodshop]

Thank you. 😢

[@colbysmith1398]

Awesome!