make your own leather splitter

Here it is! As promised, i made a tutorial about building your own leather splitter. Since i made another one, i felt the need to improve the prototype you have seen previously in my post few days ago. That one was ok, but the result depended too much on the user`s skills.. This one is way better, as it doesn`t let you make mistakes. Hope it helps! Enjoy! ps: is my first tutorial on something and the first time i ever used video editing program, so bare with me.. :)

[@bondebond]

Thank you very much. This is the closest to a commercial splitter that I have seen that is adjustable, looks to be consistent, easy to change out blades and can be made at home. Thank you for sharing. I will be building this during the coming weekend.

[@aron-rares]

Thank you, sir! Ejoy your build! 🤜🤛

[@pejutahaspa]

Thank you for going out of your way to make this video. nevermind the ungrateful people.

[@aron-rares]

hawk costlow Thank you! If one man manages to use this video, is enough for me. Enjoy and good luck with your build! ;)

[@dhcraft9472]

well one woman definitely found it useful, thanks

[@joer8854]

i don't think anyone was trying to be ungrateful just offering some constructive criticism but some comments may have been deleted. Definitely appreciate the video though.

[@Charles_Robert.9]

I was concerned about its suitability for thick leathers, many videos use very soft and thin leather. But thanks for demonstrating that it works on thick leathers as well. Brilliant

[@henningdebeer9945]

Great video. Thank you so much.

[@dominicdelprincipe2583]

This is a great vid. I really admire your skills... cheers man!!

[@aron-rares]

Dominic Del Principe thx, bud! ;)

[@cazadordeconciencia]

gracias por compartir este video. es de mucha ayuda. saludos

[@aron-rares]

Gracias! 🥰

[@a7medsh]

Great job l searched for this tool for a long time very happy to find your video Thank you

[@aron-rares]

Enjoy, buddy! That's why i made it. 😉

[@wearytraveler3524]

HECK OF A FINGER SLICER YOU BUILT THERE!

[@aron-rares]

:))

[@quiringual9]

Tank you looking forward to build this project

[@aron-rares]

Good luck, buddy! 👊😎

[@garyamesbury948]

Great little video, is there any chance of a material list we can use to build our own? You show some measurements but other will be guesswork and it would be nice to get it right first time. Cheers.

[@aron-rares]

Gary Amesbury, there are no specific materials.. i showed measurements so you can see what i used.. but other than that what can i tell you more about the materials? i only used spruce wood and iron.. the shape and dimensions you can see.. you need to improvise! don't go the exact same way as me, maibe you'll improve my project! ;)

[@jerrybaker2483]

Great video, understand most of the material and can improvise on most of the other material, but would appreciate it if you could clarify on the gauge wire you used. That would help out a lot. Thanks.

[@aron-rares]

Well, i use 3 sizes.. small is 0.8mm, next is a key chain ring cut in 2.. :) i didn't measured but is the usual one. The big one is 3mm. Thank you for watching! :)

[@epicleatherarts8326]

Thank you for the nice Video, some people always need to complain, I like it and it is great. I was wondering if you by any chance have something like a parts list or so. I would love to make my own. Thank you again !!

[@aron-rares]

Epic Leather Arts sorry, what you see in video is what i used.. i tried to measure everithing just so is obvious what i did. i Made no plans, and no parts list, because i emprovise along the build.. The ideea is very simple and i think the video should help enough so you can handle this. You can use different parts, maybe even emprove my concept and let us know about it! ;)

[@epicleatherarts8326]

Thank you so much for you quick response, I thought so that you decided what to use on the way building it, but thought wouldn't hurt to ask ;-)

[@abdellahelouardighi]

Great Job man I appreciate the effort ! Keep it up!

[@aron-rares]

ABADA ABADA thank you! :)

[@andreasdahl717]

nice work!

[@aron-rares]

thx, Anreas! ;)

[@ozmanix]

Nice watch! :)

[@aron-rares]

👍😁

[@wtw55]

No sound.

[@aron-rares]

wildbill55 yes, no audio. It was suposed to be instructional video, not entertainment! Look at the bright side, you can watch this while listening your favourite music.. ;) If you have any technical question, i'll be happy to answer! thx for watching!

[@jesusmiranda8884]

Muy interesante lo Félisto por su diseño me gustó mucho re siba un saludo de su ser vidor

[@aron-rares]

Thank you, sir! Your words are much appreciated! 🤗

[@yyppeerriitt]

Dobrý den, děkuji za inspiraci. Už nebude těžké vyrobit splitter. Ušetřil jste mi 500usd. Ještě jednou děkuji. Ať se Vám daří v další práci.

[@aron-rares]

my pleasure, buddy! happy to be of help! :)

[@synwannleathercraft8506]

You are gnious thanks

[@aron-rares]

Thanks! Enjoy, buddy! 🤘

[@xthreei]

Какой лютый колхоз! О_о

[@aron-rares]

Sorry buddy! I have no idea what you said there.. 🙈

[@11h5p4]

Way too complicated

[@aron-rares]

Sorry, it worked fine for me. I'm sure you'll find the right one for you, somewhere.. 😉

[@JohnDolan-y7y]

I'm not going to finish watching this DUMBA$$ silent movie. I think I would prefer computer narration to this.

[@aron-rares]

Move on, then.. i don't really care. I'm just sharing some info with people. Not trying to entertain you. 😉