MAKE YOUR OWN ULTIMATE CURB SPOT

[@AceTheFirePunch]

Just a note: don't breath in the cement dust - use a mask / wet piece of fabric or do the brick rubbing on a rainy day - safe your lungs for skating :)

[@diegocorrea1059]

For smokes n bud as well

[@memorysometimers3067]

Even get a homie to spill a bit of water on it as you move along and it’ll keep most dust from flying around.

[@tylerjamesnewton1422]

As an asthmatic, I agree with this. Use at least a P95 NIOSH rated mask when doing this. Prevents carcinogenic toxic particle inhalation.

[@papps2937]

I already learned this the hard way lol

[@cheapdope]

What I do is just hold a lit marb100 in my mouth while I work. It keeps my breathing to an uncomfortable minimum & gets painful smoke in my eye every few minutes which keeps them good & watery for added ocular protection. Safety first👍

[@mitchmac3383]

It's crazy how easy these guys make skating look. Fricken impressive.

[@zvnabalisong4935]

There's no one on this earth who can obsess so much about curbs as skaters

[@musicnoonelikes]

it's all i talk about

[@t90mshaweenee55]

curbs are very addictive

[@chrhadden]

do a google search on how to make a curb slippery. it will not help you

[@gunnarcole6995]

Tip wearing a high vis vest is basically like being invisible to normal people

[@SpaceNigs]

extra true if you have an orange beanie on

[@hitindahead]

Lol genius tip

[@MRREE-zw6xc]

So true. I use it in traffic to go to the bathroom and short cuts when i leave my job site lol. Just act the part n no body bats n eye

[@SpaceNigs]

@@MRREE-zw6xc we had a dude here who cemented a whole spot round the corner from a big venue on a friday night and no one looked twice cause he was wearing the vest and a orange skate shop beanie

[@MRREE-zw6xc]

@@SpaceNigs hell yeah! That's pretty awesome. And yeah after working construction for so long i definitely have my times of testing the vest with people. But definitely need to try a diy spot next and just roll woth some buddies in my white truck that also looks the part lol. I have a yellow flashing lights n cones to further the look haha

[@TheGhostOfFredZeppelin]

Those rub bricks really are a game changer, I remember just using rocks like a fucking caveman when I was younger haha!

[@shardongabriel1490]

😂😂 that’s dedication

[@TheGhostOfFredZeppelin]

@Tijn Groot Yeah it did, we just alternated rubbing the rocks with waxing and grinding and eventually it works pretty good!

[@oculusmusik]

Ive used a brick(not rub brick) before with much success

[@SantinoDeluxe]

broken cinder blocks are usually around and if you get a big enough piece you know its flat

[@c.edwards4457]

@@oculusmusik same I got 1 for 50 cents at Home Depot

[@CHNKBLWR]

Yo this is right across the street from my crib! Good Looking out homies.

[@skullfilms9301]

oh, word!?! wheres it at?

[@jeppefriis7925]

DIY tip: You can put Bondo in big cracks in the curb, and rubbrick it. It grinds and slides after you clearcoat and wax it.

[@ezedjay]

Nice. I used to love making curbs skateable. Now I'm old and broken. I still want to go and slick something up though. Maybe try a 50-50 to slappy my face on the floor.

[@MRREE-zw6xc]

Just find some with the handicap ramps and make a roll on slappy. When my back is jack and my hips dont wanna turn. but I want to feel something grind the little roll on curbs are great!

[@lvparm]

Built the slappy rail yesterday and told my friend next step was fixing up a curb, what the hell guys. This is too convenient!

[@TotterTheHuskyYT]

If there’s anyone in the world of skateboarding who can tell you what’s a good curb and how to slappy it’s gonna be Dan Corrigan!!💙💙

[@ariekanibalie]

2:15 the amount of factual wisdom passed on in this video here alone is solid gold. I know that feeling of wanting others to start rub bricking other sections of the curb spot but also not wanting to blow it up.

[@dbc.ash.]

DBC.. DAILY BLESSINGS COMING! THANK YOU GUYS for EVERYTHING, EVERYDAY!!

[@RandoManFPV]

Been skating my broom finish everything lil town in Arkansas and can't grind a thing! Put an entire candle on a ledge yesterday and still stuck (skate shops are few and far here) "Rub brick is crucial" That's what I needed to hear! Picking one up tomorrow!

[@giancarlogonzalez284]

You guys should do a vid on a non painted curb

[@garrettmckeown1863]

yeah lol red too

[@daltonharris8062]

Bro just ordered the (2) 2x4 quarters for me and my son from you guys ,lol jacked a parking curb lol bought a rub brick to get it nice and buttery and I’m stoked 👏🏻 thank you!

[@TrevFlips]

You guys have helped soo many skaters Me and my friends included! Thanks for everything 🤙🏁

[@kiri8853]

The curb spot in front of my house i made, I just waxed the whole thing without clear coat, just caked it on and it’s just butter now

[@thirdeyesurvivor3886]

Nice lol

[@davidsalsberry5748]

Rowan pros are the fire-est 👌🏼👌🏼

[@DayJawn]

Literally the best skate shoe. I own a few pair

[@robwwhat6503]

Super enjoyable to watch!!

[@steelokey]

I made one of these but it’s too high up too slappy lol, & I tried to learn crooked grinds on it but kept getting bodied. I’m super sad lol. But I been hitting this other slappy spot downtown so I’ll have to try to learn slappy’s there cuz they seem so fun 😮

[@timobrien6499]

Gulf wax user since 99 baby 🤙🏽

[@5olas]

Looking forward to the next video on this curb. 🔥

[@S.A.D.i.S.T.I.C]

Yall got nice curbs! Here in wisconsin they make the curbs at 90 degree angles and the corner is rounded off with no edge. Then they rough them up with push brooms. You would literally have to take off a quarter inch with the rub brick

[@jthymesthree602]

That’s when you get out the big guns and use an angle grinder

[@wyattlarson1104]

That’s what it’s like in Canada Alberta too

[@corybaker6688]

Passers by are right, you’re vandalizing and I love it

[@steventhehistorian]

I love this channel.

[@TheAnimeist]

3:40 "I'm a little cheap skater" Dan is so smooth, I don't think he notices his own puns anymore 😀🛹

[@hoodrichallstar]

which grit rub brick do you guys use?

[@andyjohnson3656]

so cool wish I could afford a quarter pipe or anything from u guys

[@ginafrazier5408]

Same

[@milesd.8756]

11:35 that ledge is next!

[@abbeyglencircle]

Slappy grind is back big time....!!!!!

[@evanraghupati3610]

4:08“we are not encouraging this by any means” title:MAKE YOUR OWN ULTIMATE CURB SPOT

[@billfields990]

Damn I wish my county would pour slanted curbs. Every curb here, in FL, is poured on the 90 with such crazy high humidity that rub bricking just crumbles the curb apart. Maybe make my own?

[@the1khronohs40]

Yooo! That Alf grip is sweet!

[@cachito_da_pimp]

Dude the Alf grip tape 🔥

[@kasey82913]

1:09

[@brianlambert6120]

We are doing a service disclaimer this will get you in trouble You guys rule love it

[@ericd8687]

Lmao "keen ramps made me do it an that's what I'm going with!"

[@eulisessilva4345]

Thanks bro, this is helpful

[@Mr.nobody69-520]

You are dope man keep it up

[@iamphilclark2695]

Psyched for part two!

[@jaceskeem6480]

Y’all look like such a fun team😂

[@SlowBrow]

something as mundane as curb can be such a piece of art...that is why i like about sk8

[@forrestjordan8405]

What are you rubbing the curb with? Is it called a rub brick?

[@michaelkobrin9659]

Yeah that's what those are called

[@romeisfallingagain]

can you explain the tools used please. i have no idea what the thing at the start hes scraping on the curb is, or what hes spraying on it. what is clear coat?

[@ProdBy04]

that looks so much fuccin fun

[@diddymelone2265]

wish we had such curbs as you have, in my country we have almost no painted curbs and most of them are so crusty, you cannot rub them down without reducing their height by 3/4ths

[@slimeslime2123]

If the curbs have fresh paint just hit it with clear coat and wax If the curbs aren’t painted rub brick them like crazy, clear coat then wax

[@vbsk8]

I need to get a rub brick !!!

[@codymiller9198]

Could someone list the items I would need to do this. PLEASE 🙏🏾

[@adrianguzman7964]

8:23 hol up wait a minute, something ain’t right

[@ThanatosWings]

Is the rub brick being held parallel to the top, then parallel to the side, like taking off the paint? Or are you taking off the sharp corner of the curb off by grinding the rub brick at a 45 to it? The video isn't too clear. I see a lot of curbs rounded over but it seems like you'd just roll / fall of a rounded curb and not really be able to lock in.

[@michaelkobrin9659]

What is the spray coat you guys used called?

[@reg_legs]

Any clear coat spray paint for concrete

[@michaelkobrin9659]

@@reg_legs ty

[@bradleysmith9924]

What's the bottle of spray you guys were using?

[@sinkincones8130]

Clear coat

[@jomalomal]

"we're not suggesting you do this. do as we say, not as we do" title: MAKE YOUR OWN ULTIMATE CURB SPOT hahaha thanks for the great content y'all

[@samuelorigenes1185]

so sick

[@unethicallemon67]

Are slappy back crooks harder or slappy front crooks?

[@ariekanibalie]

slappy back crooks are like the easiest grind ever for me, just roll in hard enough at a slight angle and hold it. No such luck on fs yet, but it probably does help to already have your regular noseslides and crooks, just so you know how to stand on it

[@nikosoup7999]

don’t buy a brick rub if you don’t want to look for broken concrete or rocks with curb corner nooks ceramic roof tiling bits work alright because they have a nice nook but do not last long check your rock brick think for if it’s getting extremely smooth if it is then find another one

[@TheAlternativeMind]

Painted curbs usually can grind with just wax.

[@marcgarcia6071]

Is that goodtimes grip tape

[@wyattdize966]

Where do you buy a rub brick and the stuff they were spraying?

[@SJDharmaBum]

Melt the gulf wax down. Pour in some motor oil and Vaseline. Mix it up. Let it harden and have a real buttery time.

[@codysaito8030]

😂🤣 “we should leave a bill”

[@Ajsk8s]

Dam i wish we had sk8 spots lile this in Durban Ballito

[@shardongabriel1490]

So is this for curbs and ledges that are not chunky only? Like does it have to be a fairly new ledge?

[@MRREE-zw6xc]

New or old. New ledges tend to have a smooth finish but have small lines that grab and cause friction. The rub brick and enamel make the surface buttery and lets it slide. With chunky its a bit harder for the brick since its flat. But a crap ton of wax for chunky tends to work especially with the rocks sticking out of the concrete. And a lot of pushing through lol

[@ItsJADA]

8:23 oh man

[@wyattlarson1104]

Is that just like a basic clear coat?

[@32srt32]

what about curbs that are chipped away and painted with 3 different layers of paint? you cant get a rubbrick on the bare concrete and the paint keeps chipping off exposing small spots of bare concrete.

[@adrianolini1889]

Yo this area looks familiar. Is this in Riverside?

[@darrenjames2579]

What clear coat is best to use (gloss, matt etc), or does it not matter?

[@ahappyimago]

What his he rubbing the cement with? Clear coat of what?

[@huegrickofedgewood]

If you live basically anywhere other than california , good luck. Them curbs ain't the same.

[@seco0o0o0o]

What if I don’t have a rub brick is there any alternatives

[@Splorer]

How does the rain affect the curb?

[@nikosoup7999]

if you don’t have anything just a rock will get a curb grinding no wax or laqcuer if you rub it enough

[@m_gossel]

Yes

[@bigcheese1760]

I know this is off topic from the vid, but I’m a beginner skater and I was landing my first Ollies over and over yesterday, but for some reason today I just can’t commit to doing it. Any tips??

[@sinkincones8130]

Commit you can’t give tips for comitement you just can’t be a bitch

[@sessionsinparadise7357]

This is a skaters journey lol. Some days your on. Others your legs feel weak . Consistency is key. Muscles need conditioning

[@01mail19]

Just stumbled upon this video, didn’t realize the cariuma simp himself was filming !

[@albertboersma7294]

so smooooooothhhhh

[@T33wh7]

Does what clear coat matter

[@wienersandbutts]

what grit rub brick would you suggest, like 20?

[@DayJawn]

All I skate are Rowan pros! They’re easily the best shoes in my eyes

[@OwensSkateStory]

Anyone in the UK know if this sort of thing works on our curbs? I don't think I've ever gotten an actual curb to grind at all

[@ariekanibalie]

It works but like they said, you'll need to put some extra effort into rub-bricking it. Really, this is the most important phase, and half-assing it won't do, so keep rubbing until you're over it and then rub-brick it some more. You'll be filing off a good bit of material, so consider pouring water on to wash away any dust and letting it dry before moving on to the lacquer. And if possible without immediately getting in an argument with someone, apply plenty of wax, but use a blow-torch to really melt that wax into any small holes and cracks.

[@hibro-dt5xz]

i use sandpaper instead of rub brick because its more portable

[@okidoki5922]

Dan Corrigan is friends with everyone

[@stevensepic.]

Cariuma simp

[@travishedspeth9709]

What tool did you use to smooth the concrete

[@LiamClay1114]

He used a rub brick

[@travishedspeth9709]

@@LiamClay1114 thanks man

[@Zofti]

What are curbs made of in America? It feels like in Eastern Europe curbs are made of some weird kind of beton

[@howdyitsdavid]

Did you guys take the slappy pad off the site? Not seeing it on there anymore.

[@keenramps]

Temporarily it’ll be right back though

[@skateat4824]

@@keenramps will it be longer?

[@brettkelly48]

730 W 3rd St, Long Beach, CA 90802 that's the spot boys

[@curtisbranham3787]

if i do this, can i 50-50 grind it?

[@YoungPutter]

What clear coat do you use? Does it matter?

[@sinkincones8130]

Not really

[@Transparencyproject]

After not skating for about 15-20 years, and getting back in it, where does one find a brick to rub these curbs 🤨

[@carter7907]

Home depot

[@ralphjame4431]

What are they spraying on it? I did not hear them say what it was

[@sinkincones8130]

Clear coat you gronk

[@sharki11]

Why not use red laquer instead of the clear? Also when you rub brick wear a mask

[@stvticsteve]

Shoutout bear mtn 🐻

[@bobbynasten33]

Great tutorial. Only problem is that this is a FIRE LANE!!! Messing with these curbs can wind you up in jail. Especially posting a video. There are plenty more out there. Be safe.

[@garrettmckeown1863]

@Yasu Leone you should basically never do what you are told especially in current times. but your argument is trash and weakens the argument which like i said is true often and dear to probably most skaters

[@garrettmckeown1863]

@Yasu Leone why do I need to explain this? Is so simple

[@lamBETTERthanY0U]

Every red curb is a fire lane. You might get a ticket but not end up in jail

[@dinisl3itao659]

what is the name of this stone that you use to sand the spot?

[@RealTreeCrew]

It’s a rub brick. You can get them from any hardware store.

[@Mclovinthedank]

Man looks fun, east coast curbs aren't the same.

[@rexradrexrad]

cracked, rough ass curbs; new england life ):

[@Mclovinthedank]

@@rexradrexrad yea, mostly im saying how the curbs out west are slanted and out here they are vertical. Maybe i just dont know how to skate vert...

[@stevensepic.]

@@rexradrexrad they are so lucky to have red curbs like that shit I spent like an hour smoothing a curb with a rock lmao

[@challum1597]

This is impossible in the uk the curbs are really weird and stony whenever u try to do a 50-50 u just get hung up and don’t grind at all

[@nickredwine17]

thank god for american concrete standards

[@colerebeil]

8:23

[@chrhadden]

i bet dried up bacon grease can be a substitute for wax. has anyone ever tried it? my gf doesnt dump it in the sink but saves it in a crisco can