Make Zinc Powder by Electrolysis

  Рет қаралды 180,707

NurdRage

NurdRage

Күн бұрын

Пікірлер
@shockwavecity
@shockwavecity 8 жыл бұрын
My favorite thing about this channel is the warning in the beginning doesn't end with "please don't try this at home", it ends with "wear gloves when handling".
@noodledoodle4655
@noodledoodle4655 7 жыл бұрын
Don't come running to me if you blow your leg off
@j1j250
@j1j250 6 жыл бұрын
Better tell people how to be safe rather then them do it without proper safety because they don’t know how to
@WeebRemover4500
@WeebRemover4500 5 жыл бұрын
@the rougemillenial yes they compensate by appearing authoritative, its quite childish really
@benjaminjustice2438
@benjaminjustice2438 3 жыл бұрын
you all prolly dont care but does anyone know of a trick to get back into an Instagram account?? I was stupid forgot my account password. I appreciate any tricks you can offer me
@nathanielmatthias9360
@nathanielmatthias9360 3 жыл бұрын
@Benjamin Justice Instablaster ;)
@noisytim
@noisytim 8 жыл бұрын
The tarnished zinc looks absolutely stunning. A high-resolution photo of that would make an amazing print or backdrop. Maybe even a wallpaper.
@rich1051414
@rich1051414 8 жыл бұрын
Zinc oxide will also fluoresce orange under a black light :)
@evanriddle1614
@evanriddle1614 3 жыл бұрын
I've made these dendrites and used them for air batteries. It works but the zinc powder dissolves like putting snow under a blow torch. This very thing is being used for power storage systems and was used by the German postal service to power their trucks but was only a pilot program that was discontinued. Thanks!
8 жыл бұрын
I love these videos but my family start getting worried about "demonic voice talking science" from my room.
@danre2492
@danre2492 4 жыл бұрын
xdddddddd
@trung12309
@trung12309 4 жыл бұрын
ng miền nào vậy
@VerbenaIDK
@VerbenaIDK 2 жыл бұрын
for anyone willing to make some zinc powder, and for some reason doenst have zinc oxide nearby but has d2 batteries, you can directly dissolve metal zinc in sodium hydroxide, just know that depending on the brand the battery internals changes, in my opinion, of you want to take it apart easily and have nice clean zinc case, rather than rayovac that gas some weird solic black glue that can be a pain to deal woth it since i have no idea what it is also, i measured the zinc body of the batteries i recently dissasembled, and my scale says both are 9 grams, that may change from battery from battery, brand from brand, but average i think it's not far off to suppose it would be around ~9 grams for most batteries from most brands if you for some reason dont want to wait to zonc oxide to arrive, have to make zinc oxide or have some zinc metal around and dont want to buy zinc oxide, i hope this helps! but if you really are in a hurry, i shouldnt have to mention but i will anyway: dissolving the zinc metal into solution will take a lot longer than fine zinc oxide powder! as a side note: as always, when reacting metals, clean it as best as you can, sand it all around, steel wool, steel brush as best as you can to make the reaction faster, the cleaner the faster it will react
@zahariburgess3660
@zahariburgess3660 7 ай бұрын
Thank you 🙏
@NurdRage
@NurdRage 8 жыл бұрын
I've purchased another hotplate stirrer so hopefully that will arrive soon. Then we can get back to real chemistry. (The hotplate stirrer in the video is another broken one that just stirs and doesn't heat)
@3Dusers
@3Dusers 8 жыл бұрын
how does it stir, a magnet? how does the magnet work
@3Dusers
@3Dusers 8 жыл бұрын
how does water get stirred with a magenet
@3Dusers
@3Dusers 8 жыл бұрын
oh there's a magnet inside the water that spins
@DirectorAntify
@DirectorAntify 8 жыл бұрын
Can't you use a heating mantle overtop of the stirrer as a makeshift hot plate?
@spudybugged199
@spudybugged199 8 жыл бұрын
it alse works with Al2O3?
@kemarre
@kemarre 8 жыл бұрын
I don't got money but. Got appreciation. I appreciate your sharing your knowledge. Thanks.
@neurotoksin
@neurotoksin 8 жыл бұрын
Loving the 4K uploads! Looks great :D
@benearhart1224
@benearhart1224 3 жыл бұрын
If you take the zinc out, scrape it off, and wash it immediately 3 times with dH20, then twice with acetone, you have yourself activated zinc. Be sure to dry it under an inert atmosphere because it is pyrophoric.
@WindowsTutorial772
@WindowsTutorial772 8 ай бұрын
for aluminum, same process can be done with sodium aluminate ??
@muizzy
@muizzy 8 жыл бұрын
Have you upgraded your camera? Video quality is great in this one!
@krisztianszirtes5414
@krisztianszirtes5414 8 жыл бұрын
Don't forget that you can purify zinc in this method very efficiently with little to no waste products
@OriginalUnknown2
@OriginalUnknown2 8 жыл бұрын
Thank you, Mr. Rage!
@sanjeevkumargill919
@sanjeevkumargill919 2 жыл бұрын
Sir how much walts and amps have to be given
@kamilhultaj5006
@kamilhultaj5006 8 жыл бұрын
Actually, I have no single idea about all this but I find this enjoyable to watch since very long time. :)
@stephenjacks8196
@stephenjacks8196 4 жыл бұрын
FYI industrially zinc is plated using alkaline cyanide bath and also alkaline pyrophosphate solution. Rem electromotive force series is different in alkaline vs acid e.g. hydrogen is 0.0 volts in acid and -0.8 volts in alkali. Also the area around the negative electrode attracts zinc positive ions not negative zincate ions; need agitation.
@CFFNC
@CFFNC 8 жыл бұрын
I didn't think it was possible to reduce zinc metal out of water. Really glad you posted this, now I can finally use that giant bag of zinc oxide for something and won't have to grind down zinc for powder anymore.
@07Timmers
@07Timmers 6 жыл бұрын
What were the volts and amps you were using to make zinc?
@lakshminarayana6045
@lakshminarayana6045 3 жыл бұрын
I have the same question?
@sanjeevkumargill919
@sanjeevkumargill919 2 жыл бұрын
Sir, I couldn't do it either. Do you know anything about Volts and amps please tell me ?
@AlphaPowell7
@AlphaPowell7 8 жыл бұрын
Does this work with cadmium? I know it and zinc have a bit in common being in the same group. I have a source of cadmium hydroxide and would like to make the metal.
@biowerks
@biowerks 8 жыл бұрын
glad to see you again!
@KsatriaChannnel
@KsatriaChannnel 2 жыл бұрын
Voltase? Ampere?
@qb6025
@qb6025 3 жыл бұрын
I don't understand, why it aggregates, not plating 3:57
@akhilthechemist
@akhilthechemist 7 жыл бұрын
you must use a wire at cathode that would prevent zinc plating and give you crystals of zinc.
@Prchemist06
@Prchemist06 3 жыл бұрын
Hey! I want to know your confirmation about the method that this method will work with aluminium oxide or foil ...
@muhammadbakr2783
@muhammadbakr2783 4 жыл бұрын
Can I use carbon instead of nickel?
@xtremespino
@xtremespino 8 жыл бұрын
Is it possible to do this with Aluminium?
@thedanger2823
@thedanger2823 8 жыл бұрын
i hope
@jamie91995
@jamie91995 8 жыл бұрын
Just add small squares of aluminum foil to a coffee grinder.
@jstuyfzand5467
@jstuyfzand5467 8 жыл бұрын
No, I am done with that shit
@0Sebek0
@0Sebek0 8 жыл бұрын
nope aluminium can't be reduced to metal form in water, you need some kind of electrolisis in molten salts for that, and of course it wouldn't be in powder form that way
@laurdy
@laurdy 8 жыл бұрын
aluminium reacts too vigorously with caustic soda to work
@aaronward6092
@aaronward6092 3 жыл бұрын
Your solution gets clear so quick. Lol
@orengotlib2435
@orengotlib2435 6 жыл бұрын
Zinc powders can be very reactive in air and water. Be careful when making fine powders or large batches as pure zinc powder is pyrophoric.
@stephenjacks8196
@stephenjacks8196 4 жыл бұрын
I've never been able to set fire to Zinc powder in air. Apparently my propane and MAPP gas (~acetylene) melts the Zinc dust but it doesn't burn. The burners will ignite magnesium turnings and MAPP can light Aluminum powder.
@RBHAI88
@RBHAI88 3 жыл бұрын
@@stephenjacks8196 have you made zinc which does not catch fire at its boiling point ?
@SkipFlem
@SkipFlem 3 жыл бұрын
I had no problems igniting some chemistry kit zinc powder with a simple fuse; getting the smoke out of the basement was a bit harder. (Gratefully neighbors called my parents before the f.d.) July, 1969.
@JoakimfromAnka
@JoakimfromAnka 2 жыл бұрын
Can you remove zinc plating by electrolysis?
@dorzsboss
@dorzsboss 7 жыл бұрын
what voltage did you apply?
@igrewold
@igrewold 7 жыл бұрын
1:20 Ain't sure but try 12V 1 Amp then like he said drop to %20 current( .2A = 200mA ) For electrolysis current is more important than voltage but since voltage is a path to current then it must be high(12v) See this, if you got a variable power supply like Gophert, it will read you how much voltage/amperage(current) is being consumed by electrolysis or use 2 cheap DMMs if you only got a 12v dc adapter/source. the one that reads voltage connects parallel to +/- wires and the one that reads amperage/current connected in series, meaning before the + or - electrode. www.harborfreight.com/7-function-digital-multimeter-92020.html (if you already got a DMM then that is good so just get another and if not you want one of the DMMs to be decent(not very) like Aneng 8008 for example)
@TextuallyActive122
@TextuallyActive122 8 жыл бұрын
Hey NurdRage, will you be doing your Q&A's anytime soon, or is that series dead?
@parcydwr
@parcydwr 6 ай бұрын
@NurdRage I am wanting to purify some zinc for our periodic table. My source material is some rather nasty corroded zinc from dead zinc-chloride batteries. I have saved the manganese dioxide / electrolyte paste and carbon electrodes.i am just wondering if a lye in water solution will dissolve the zinc and zinc oxides, maybe chlorides or other corrosion products? Would the electrolysis process then leave contaminates in solution and maybe also form an anode sludge of less soluble material? I am not a chemist, just trying to work things out to keep my two son's interested in doing these experiments.
@34Scrooge
@34Scrooge 8 жыл бұрын
how make aluminium powder chemistry method?
@Leadvest
@Leadvest 8 жыл бұрын
React aluminium with steel balls.
@34Scrooge
@34Scrooge 8 жыл бұрын
Lemtil lol
@recessiv3
@recessiv3 8 жыл бұрын
34Scrooge 1. Obtain sodium hydroxide solution 2. Dissolve aluminium to form NaAl(OH)4 3. Perform electrolysis 4. Scrape aluminium off cathode 5. Result
@outofthebox5972
@outofthebox5972 7 жыл бұрын
You can't make it by the same process .aluminium is very reactive to hydroxide .it's react to produce hydrogen gas and you return to the same compound sodium aluminate.
@rich1051414
@rich1051414 7 жыл бұрын
Is there a reasonable way to convert aluminum oxide to aluminum powder? I have always been curious about that. Aluminum powder is very useful in a lot of things, albeit dangerous, but all the good things are dangerous if used improperly. I know electrolysis is NOT a reasonable method, unless you can produce hundreds of kiloamps at 5v xD
@Clutch28
@Clutch28 8 жыл бұрын
what happened to the pyrimethinine videos?
@applegwava
@applegwava 8 жыл бұрын
he faced a lot of problems trying to make it,i would guess that he is finding better methods but is failing in the process
@NurdRage
@NurdRage 8 жыл бұрын
+Clutch28 cant continue without a working hotplate. I already ordered a new one and am waiting for it to arrive.
@dalitas
@dalitas 8 жыл бұрын
I'll be honest... we... I need more videos! :)
@jozefnovak7750
@jozefnovak7750 Ай бұрын
Super! Thank you very much!
@mustafahelmiamri6391
@mustafahelmiamri6391 Жыл бұрын
hello sir, can you make a tutorial for melting tin into powder... for tin paste. hope the sustenance is smooth and the channel is growing
@andrewhess4282
@andrewhess4282 7 жыл бұрын
Now how can I melt the zinc powder back down into solid zinc? I happened to come into possession of a large quantity of zinc powder, and every time I try to melt it into bulk zinc, it just burns. I don't have the wherewithal to put it under inert gas. Ideas?
@mobalottt
@mobalottt 7 жыл бұрын
What voltage and how much current did you use? Did you use AC or DC?
@stephenjacks8196
@stephenjacks8196 4 жыл бұрын
He said positive electrode and negative electrode. There is plus and minus on a battery not an AC cord.
@ThePeterDislikeShow
@ThePeterDislikeShow Жыл бұрын
Can you show how to anodize zinc?
@Cristi0986
@Cristi0986 8 жыл бұрын
can be made aluminium powder by electrochemistry?
@gazzarrr666
@gazzarrr666 4 жыл бұрын
No. At least, not in water. It is Way too electropositive.
@trollmcclure1884
@trollmcclure1884 Жыл бұрын
but will it clean the zinc from lead, cadmium etc? I've read that ammonium carbonate can do it somehow
@shelbysgarage5828
@shelbysgarage5828 5 жыл бұрын
Could I.use a zinc anode? and would that transfer zinc to the copper cathode?
@NvrchFotia
@NvrchFotia 8 жыл бұрын
The sodium hydroxide I bought from ebay didn't work. I think they sold me a bag of small rocks.
@AlphaPowell7
@AlphaPowell7 8 жыл бұрын
Just go to any hardware store, "lye crystals" are sold as drain opener.
@NvrchFotia
@NvrchFotia 8 жыл бұрын
Powell I just made some cuz I had a lot of sodium.
@saikittang7450
@saikittang7450 8 жыл бұрын
Can I use a copper anode? Also, can I dissolve zinc casings from dead batteries to make the sodium zincate solution? After all, both zinc and zinc oxide dissolves in sodium hydroxide
@FriendJamie
@FriendJamie 8 жыл бұрын
This is slightly terrifying... totally amazing
@evanriddle1614
@evanriddle1614 4 жыл бұрын
Deutsche post office used this method to generate/regenerate for zinc air batteries for a small fleet of trucks in 1995. A company in Canada is doing something similar for power storage. The bundepost could generate 100kg per hour but it took 750kg to fuel a truck for 200 miles carrying 2 metric tons. My question is, how do you rinse and preserve the powder so I can make my own zinc air batteries? Thank you so very much!
@bintangjatuh2748
@bintangjatuh2748 Жыл бұрын
Is this electrowinning right? Or is it electrorefining?
@maciejdelekta6167
@maciejdelekta6167 8 жыл бұрын
Is it possible to get aluminium powder in the same way?
@Prchemist06
@Prchemist06 4 жыл бұрын
Yes
@nivmoshe5536
@nivmoshe5536 8 жыл бұрын
NurdRage I have a question why you used zinc oxide to be dissolved in the sodium hydroxide solution if sodium hydroxide reacts with zinc at the same way?
@outofthebox5972
@outofthebox5972 7 жыл бұрын
Niv Moshe Maybe i can help you . Yes sodium hydroxide can react with zinc but if the process is working that doesn't happen cz at the same time you produce zinc metal so when finished the process you must to filter off the solution instantly. To protect your powder .and dry it with acetone or ethanol. And sry for bad english .
@vornamenachname6300
@vornamenachname6300 6 жыл бұрын
well, the point was to make the zink, so ...
@ابومريم-ط3ض
@ابومريم-ط3ض 6 ай бұрын
A question, please. Is the zinc oxide I made now toxic or non-toxic.?
@FLYINGDUTCH2000
@FLYINGDUTCH2000 2 жыл бұрын
Is it also possible to use ather metals like RVS for the anode and kathode of something?
@Valkyre_001
@Valkyre_001 8 жыл бұрын
Could you explain why this process gives a spongy zinc layer and an acid process does not?
@bedouintrader
@bedouintrader 5 ай бұрын
what was the color of zinc oxide ??? I didn't see it well
@عبداللهاحمدعبدالله-ش4ذ
@عبداللهاحمدعبدالله-ش4ذ Жыл бұрын
مرحبا صديقي هل يصلح الزنك هذه الترسيب الذهب من الملكي
@abdellahgogop5653
@abdellahgogop5653 4 ай бұрын
Is there something to replace the nickel anode with???
@abdellahgogop5653
@abdellahgogop5653 4 ай бұрын
Can i use carbon electrode???
@TheMono25
@TheMono25 4 жыл бұрын
Will sodium hydrogen sulfate work instead
@حامد-ك1و
@حامد-ك1و Жыл бұрын
Great video: Do ​​I need to wash with hot water? A second question: Can we use it for precipitation, but rather aqua regia?
@HIB1968
@HIB1968 3 жыл бұрын
Hi, when i have drop my PGM’s with zinc can i recover the zinc I’ve used this way? thanks
@akaruikage8576
@akaruikage8576 8 жыл бұрын
Very nice Video! But I have a question: Can you do the same procedure with aluminum oxide? Or do you need a different solvent?
@neutronpcxt372
@neutronpcxt372 5 жыл бұрын
No. Aluminium reacts with sodium hydroxide to form sodium aluminiate.
@MustafaAhmed-rr8wu
@MustafaAhmed-rr8wu 3 жыл бұрын
@@neutronpcxt372 mean we can do the aluminium powder with the same steps ? Or no
@lautaromorales2903
@lautaromorales2903 3 жыл бұрын
@@MustafaAhmed-rr8wu aluminum is highly reactive, so it can't be deposited in the cathode, and only hydrogen is going to be reduced
@lautaromorales2903
@lautaromorales2903 3 жыл бұрын
but this can be done with lead
@transgayatheistmarijuanasm803
@transgayatheistmarijuanasm803 8 жыл бұрын
can this zinc powder be used to carry out the clemmensen reduction?
@katodisadeputki5695
@katodisadeputki5695 4 жыл бұрын
Does the nickel electrode wear?
@vabbe71
@vabbe71 3 жыл бұрын
Can you please make a vidfeo when maufacturing Raney-nickel catalyst. It's a superior catalyst in organic chemistry and does the same job as Pt/C, Pd/C and PtO2 but to a fraction of the nobel catalyst's
@Hobypyrocom
@Hobypyrocom 8 жыл бұрын
what mesh size of zinc particles will this produce?
@rajnipandya3302
@rajnipandya3302 4 жыл бұрын
Can we separate zinc from copper sulphate electrolyte by this method??
@johnlaurits381
@johnlaurits381 2 жыл бұрын
Would this work with sodium carbonate rather than sodium hydroxide?
@GrantFrankBurton
@GrantFrankBurton 2 жыл бұрын
Can you make a video on how to Recycle zinc sulfate.... how to separate the zinc from sulfuric acid and not destroy the acid other then distillation. I tried with Electrolysis, the moment I cut the power the zinc goes back into solution. even diluting the solution, I can't get the zinc out fast enough. Or maybe it's just not possible?
@seffymidtatawa9323
@seffymidtatawa9323 5 жыл бұрын
can you show us how to make brass solution or how to make activator?
@carlmartel8510
@carlmartel8510 7 жыл бұрын
Can another metal be used at the anode?
@alrehmatshirani8831
@alrehmatshirani8831 3 жыл бұрын
Simple shape where zink use...wich parts machinary have...please i want
@il_vero_saspacifico6141
@il_vero_saspacifico6141 3 жыл бұрын
It work It i put a block of zinc and not zinc oxide?
@graywolf2600
@graywolf2600 8 жыл бұрын
Any reason why this process creates a sponge versus a plate like the acid process?
@mohsenium
@mohsenium 2 жыл бұрын
Can we do this with aluminium also ?
@crybabies2600
@crybabies2600 4 жыл бұрын
what is that metal or bullet something at the first?
@stephenjacks8196
@stephenjacks8196 4 жыл бұрын
Hardware store has "galvanizing" paint which I sprayed into beaker of naphtha (thinner) and the zinc powder was reactive with aryl chloride. I cheated by using an ultrasonic source to stimulate the slow zinc reaction. Sonication stimutates grignard start and really seams to help with multiphase reactions (e.g. conc NaHSO4, NaBr, MeOH > MeBr). We took a grinder to a welding "zinc" but powder was too oxidized needed activation.
@Taha-hv6yj
@Taha-hv6yj 4 жыл бұрын
Is it pure zinc? Cuz I'll react it with methyl iodide to make methylzinc
@DulgenukChannel
@DulgenukChannel Жыл бұрын
How to powdering tin?
@AJ-sj3cj
@AJ-sj3cj 4 жыл бұрын
Is there any substance works in the place of sodium acetate to form zinc powder
@DrAyoub-ln4ly
@DrAyoub-ln4ly 3 жыл бұрын
Can I use this process to obtain titanium from titanium oxide?
@WilianMarangoni
@WilianMarangoni 8 жыл бұрын
great video, its possible make a video about through-hole PCB plating?
@Koroistro
@Koroistro 8 жыл бұрын
How energy hungry of a process is this? How many joules of energy for a gram of Zinc yeld? I know i could check the Delta G of the reaction but how energy efficient of a process is this?
@jasonvaughn4177
@jasonvaughn4177 5 жыл бұрын
This is an old video but much appreciated. Very cool, although would using ZnCl2 work as a substitute for the oxide? I have a bunch of ZnCl2 that I don’t have a use for and zinc powder is def something I have wanted to play with. Great work as always 👍🏻
@gazzarrr666
@gazzarrr666 4 жыл бұрын
Dissolve the chloride. Use enough NaOH to ppt all of the zinc as the hyroxide. Wash precipitate and dissolve it in more NaOH. You then have your sodium zincate starting material.
@szymongolac7853
@szymongolac7853 3 жыл бұрын
Yes you can, but it will cause production of toxic Cl2 gas instead of O2 so it's a bit more dangerous
@user-sg2yt6nc1z
@user-sg2yt6nc1z 4 жыл бұрын
Can you make aluminum powder by electrolysis??
@jaydaksrules5316
@jaydaksrules5316 8 жыл бұрын
Can this be done with tin oxide? to make tin powder.
@mr.0x373
@mr.0x373 2 жыл бұрын
Could this work with aluminum?
@harun7826
@harun7826 5 жыл бұрын
thank for this video. can I make lead powder from lead oxide with same method_?
@Tokimime31
@Tokimime31 8 жыл бұрын
I know that a person can get aluminum chloride by dissolving aluminum in hydrochloric acid, is it possible to reverse this to get aluminum from aluminum chloride? If it is possible how is it done?
@shrikesavadithya6683
@shrikesavadithya6683 8 жыл бұрын
would there be any reaction with the copper circuit board and if yes then what would be produced ?
@gazzarrr666
@gazzarrr666 4 жыл бұрын
Not as the cathode, here. The fact that you are reducing zinc ions to metal, here, means that the cathode is kept at an electrical potential that ensures that it remains as a metal.
@karnour8859
@karnour8859 8 жыл бұрын
@NurdRage I have a question please...Its about Goulard's extract which is mainly lead subacetate...well the official pharmacopoeia procedure states that 250 gm lead acetate + 175 gm lead mono oxide dissolved and titre to 1 liter..the filtrate is isolated and called strong solution and the 12.5 ml of the strong solution is diluted further on demand to form the diluted medical lead sub acetate...the question is if I had lead subacetate powder haw can I prepare the diluted form of this extract to use it in my pharmacy...my calculations lead me to use 0.003 dilution that is 3 grams of lead sub acetate in 1 liter...any ideas please?
@NurdRage
@NurdRage 8 жыл бұрын
Your pharmacy should not be using such a toxic compound.
@karnour8859
@karnour8859 8 жыл бұрын
it is used topically as a powerful astringent solution in hemorrhoids...it is still used in Egypt pal
@NurdRage
@NurdRage 8 жыл бұрын
That doesn't make it any safer. Lead should be avoided on anything medical.
@karnour8859
@karnour8859 8 жыл бұрын
I agree to a certain extent...I know lead is very poisonous yet it is absorbed on daily basis from car wastes and glaze painting on housewares...I agree with you rather...Yet in Egypt its a little bit different we are obliged to a certain prescription laws which makes the soln still used and applicable...but do you really think that concentrations as low as 0.003 could have this damage...take in mind that the duration of therapy is 1 week max...another thing to take in mind that the quality of other medicines that could substitute for it available in Egypt is negligible..take my word for this
@macronautics
@macronautics 8 жыл бұрын
Hey, would you like to make a video where you synthetise menthol? I cannot find it anywhere and I thought it might be quite interesting.
@vabbe71
@vabbe71 3 жыл бұрын
Can I make nickel powder the same way?
@07Timmers
@07Timmers 6 жыл бұрын
Can u use potassium hydroxide inside of sodium hydroxide?
@mattibboss
@mattibboss 8 жыл бұрын
can KOH be used?
@laurdy
@laurdy 8 жыл бұрын
can you show us how to make tin powder?
@dave6733
@dave6733 7 жыл бұрын
@NurdRage Can this work with Magnesium Chloride or Magnesium Hydroxide?
@stephenjacks8196
@stephenjacks8196 4 жыл бұрын
Magnesium doesn't dissolve in Sodium Hydroxide because it doesn't form anything like "zincate". Reactive metals don't electoplate well from water solutions.
@rishabgupta5793
@rishabgupta5793 8 жыл бұрын
this is best way to remove zinc from water
@nobleofftrack741
@nobleofftrack741 8 жыл бұрын
What type of power pack do you use?
@nobleofftrack741
@nobleofftrack741 8 жыл бұрын
For your electrolysis that is.
@mihajlopetkovic2003
@mihajlopetkovic2003 5 жыл бұрын
Can you use zinc anode in concentrated sodium hydroxide solution so that you leach zinc from anode and deposit it as a powder on cathode?
@neutronpcxt372
@neutronpcxt372 5 жыл бұрын
Yes.
@Berghiker
@Berghiker 2 жыл бұрын
Can you show how to make ANILINE DYE? (PURPLE MAUVE) color.
@sciencestararvinsinghk
@sciencestararvinsinghk 8 жыл бұрын
can aluminum b done like this
@philip9487
@philip9487 8 жыл бұрын
awsome video man
Make Zinc Metal by Electrolysis (Fixed)
8:31
NurdRage
Рет қаралды 98 М.
Make a Silver Oxide Zinc Battery
16:12
NurdRage
Рет қаралды 81 М.
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
5 Surprising Uses for ZINC You Never Knew Existed
28:15
Chris Ralph, Professional Prospector
Рет қаралды 50 М.
The Dome Paradox: A Loophole in Newton's Laws
22:59
Up and Atom
Рет қаралды 614 М.
Make Iron Oxide (for Thermite)
9:41
NurdRage
Рет қаралды 594 М.
Can You Float a Liquid on a Gas?
19:17
Cody'sLab
Рет қаралды 3,2 МЛН
Making Sodium Metal (The Castner Process)
20:49
Scrap Science
Рет қаралды 107 М.
Electroplating - Easy DIY Nickel, Copper, Zinc Plating
9:38
Geoffrey Croker
Рет қаралды 3,8 МЛН
A Grape Made of... Meat?? - Tissue Recellularization
20:04
The Thought Emporium
Рет қаралды 10 МЛН
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН