Rather than delete the center line used to locate the hexagon, I recommend changing its 'line type' to construction. It allows faces to remain selectable as expected while also maintaining reference geometry.
@MoeReefs Жыл бұрын
OMG your a genius. All the other tutorials on honeycomb are ridiculous. Your method skips like 10 steps ahead. Thank you!!
@Themakersworkbench Жыл бұрын
Happy to help!
@aaronmccombs496617 күн бұрын
Excellent, I could follow your clear and concise instructions, and apply the honeycomb pattern to my electronics enclosure. Thank you so much for sharing your knowledge. Have a nice day, sir.
@DavidPutzolu6 ай бұрын
Great approach that makes use of rectangular pattern + directions in sketches. This is the best way to make honeycombs I've seen - much better than the other videos, plus short and to the point without having unnecessary filler time.
@brianh46762 жыл бұрын
perfect. Right to the point without being boring or confusing. Keep up the good work.
@Themakersworkbench2 жыл бұрын
Thank you!
@wesselsi37919 ай бұрын
i have been using fusion360 for 6 months now and i did not know you could select a direction with the rectangular pattern tool, and that you can pull it 2 ways. Thank you in advance for saving my time in the future!
@JFK3-1 Жыл бұрын
Nice use of patterns. I would probably extrude the interior webbing first. Then do a second sketch and hit P to Project the two circles onto the new sketch and then finish and extrude the outer circle. No individual deleting.
@johnfellers56916 ай бұрын
This is such a perfectly made video to understand how to do this. Thank you for creating it for "all of us"!
@EarlyBirdArms Жыл бұрын
Best method I have seen yet. Thank you for this tutorial 🙏
@volkhen02 жыл бұрын
I've seen few videos how to do it and this one is the best.
@j.g545 Жыл бұрын
easier and faster if you extrude the middle polygon then use the pattern on the extrude feature
@TreDBacon Жыл бұрын
Thank you for your tutorial, short and concise! I preferred as suggested by another user to not delete the centerl line of the hexagon instead i turned it into a construction line. In addition I created 2 functions (hexagon thickness and distance between hexagons) in order to make the pattern parametric, now it's a pleasure to make hexagonal patterns and edit them in a few clicks.
@Themakersworkbench Жыл бұрын
You're welcome!
@bradnelson35956 ай бұрын
Thank you for a clear tutorial. I hope you do more like that.
@ThatGuy-ou4ev Жыл бұрын
This is the best method I've seen thus far. The other methods are a lot more involved.
@patrickcarpenter11029 ай бұрын
Thanks for a very helpful video. It makes creating a honeycomb pattern easy to follow for this or other applications.
@stavart13 Жыл бұрын
Very helpful and in particular you solved my spacing issue, your method is the quickest and easiest, THANK YOU
@cookedaudio6 ай бұрын
Wow, thanks so much. I was doing this in a much jankier way! Much appreciated! -JC
@ottovp9 ай бұрын
you saved my pc from flying out of the window.
@n3x0ntm985 ай бұрын
I learn so much in 8 min. Thank you, Mr :D
@relapsetackle Жыл бұрын
Great video! I've been wanting to get into 3D printing and designing lure molds. I will be watching a lot more of your tutorials.
@pcdc1337 Жыл бұрын
Thank you for this perfect straightforward tutorial.
@jack531046 ай бұрын
You can select honeycombs and delete them from sketch after finishing the pattern :)
@VisualReversal Жыл бұрын
Thank you! This was very helpful and very easy to follow.
@BlenderRender1 Жыл бұрын
Thanks, I am making thumbsticks for my FPV drone controller, and I needed some grip for the thumbsticks.
@user-zv3gi1yc3j5 ай бұрын
Great job. I found this very helpful.
@aligatoryisus9865 Жыл бұрын
Thank you so much ,It was really useful
@Themakersworkbench Жыл бұрын
Glad to hear that
@kt3239 ай бұрын
Awesome video mate, thank you for the great tutorial!
@vanhelzer22 Жыл бұрын
I appreciate your efforts. thank you!
@MakerDan552 жыл бұрын
Super helpful. Thanks.
@Themakersworkbench2 жыл бұрын
Glad it was helpful!
@leonardoinhoqui4 ай бұрын
How do I make an exact measurement of 0.44 between them?
@FictionFactoryOfficial Жыл бұрын
thanks for the tutorial, it was very helpful
@bacartibacarti9182Ай бұрын
Super 👍
@sfrskz Жыл бұрын
finally i learned it. thank you
@nichols174118 күн бұрын
How do i extrude the outer wall to a different height than the middle honeycomb pattern?
@FarmGarageSolutions6 ай бұрын
Thank you!
@FreedomFactory3D2 жыл бұрын
Good video, strait to the point, thank you it helped me allot.
@Themakersworkbench2 жыл бұрын
Glad the video was able to help you! Thank you for watching!
@pawanpandit472410 ай бұрын
Very helpful
@diethylmalonate Жыл бұрын
My trim function doesn't detect the intersection between the honeycomb and the boundary lines, and the extrude tool can only select the entire inner area, what am I doing wrong?
@luismiranda69064 ай бұрын
The free edition does not have the polygon options?
@Themakersworkbench4 ай бұрын
You're comment is incorrect. Using the free version of Fusion360, In the sketch workspace, if you click the create dropdown, you will see the polygon option, and if you click the arrow beside it, you will see the polygon options. Here's a screenshot showing that the polygons are there as of 4/21/2024 using Fusion version 2.0.18961. imgur.com/a/C3OVpYj
@m.s.idrischannel5655 Жыл бұрын
thanks, much2 easier method
@JuniorSousaBr5 ай бұрын
TOPPPPP
@jackmcgrath957011 ай бұрын
I would've used geometric pattern
@user-nh5tm3gq3e6 ай бұрын
👍👍👍💚
@maxseveroff45686 ай бұрын
@DracLtr8 ай бұрын
This is bad workflow. Pattern is made primarily in the volume modeling environment (Solid tab), not in sketch. In addition, it is faster and more convenient.
@Themakersworkbench8 ай бұрын
There are many ways to accomplish the same task. This is one and works well for those of us who design our models in the sketch space first.
@beepboop81848 ай бұрын
Designin not in metric? Are you kidding?
@Themakersworkbench4 ай бұрын
I'm American, and 93% of my audience is American. I will include metric measurements in the next video.
@fetthunderdome Жыл бұрын
"6 sides polygon" for American people. For the rest of the world it's an exagon.
@jeremy63847 ай бұрын
a very delayed start.
@keptleroymg68777 ай бұрын
bad method manual
@AM-jw1lo Жыл бұрын
Thanks, but why do you have background noise when you are filming? most annoying.