Making a Bike Roller using old hubs

[@liveworthy5168]

Does it have resistance

[@markusdombois464]

Excellent design. Thanks for sharing. Best one I've seen yet. Except I think you can get away with not connecting the rollers to the the part that holds the forks. So long at the roller part does not slide, if should stay in place once it is lined up.

[@zenmaster2718]

Naalala ko dati nung nagppahasa kmi ng kutsilyo sa naka bike. 😅 Hahaha ang tanda ko na pala

[@pakdesuparyo917]

this system can't be used for cadence drills and pedalling technique. however it xan be used for power training, just add flywheel and resistance.

[@bm.renato]

Why not?

[@dinogarbida3294]

Astig.. sir.. good job..po Medyo tunog lang nag hahasa ng itak

[@Kulikutz]

Defective po kasi yung isang hub sir kaya maingay.. Hehe.. Pero pag parehong ok yung hub sure na tahimik lang po.

[@dinogarbida3294]

@@Kulikutz salamat lods ma try kunga gagana siguro khit lumanag chinese hubs

[@Kulikutz]

@@dinogarbida3294 yes gagana esp sa RB..kasi manipis lang yan..

[@Timsaopedro]

Bom dia Vc coloco quando cm de um para o outro?

[@panditraoupadhay5132]

Very good idea and it is very good technique

[@joebertcarino4513]

Napakaangas🔥rs always.

[@cipajarantv]

Keren pisan..👍🏿👍🏿👍🏿

[@MKABMproduction]

Ayus yan idol.. 🤘🤘🤘

[@Kulikutz]

Thanks po

[@Kibrusha]

The front part is unnecessary. Just get something to make the bike is not wobbling.

[@IrinBike]

watching bro

[@Kulikutz]

thanks sir. ganda din po ng mga vids mo..

[@rudyinthesky4967]

Very clever....

[@yaguswahyudy6904]

Gampang di tiru...👍

[@LarryjB53]

All you need to do is add a flywheel for continuity and added resistance.

[@Kulikutz]

Thanks.

[@peanut8754]

bright idea sir hahaha

[@hungduy8481]

hi bro, what kind of hubs u used ?

[@nelvenventenilla9540]

Ask ko lng po if ano po mas maganda gamiting electrode?

[@Kulikutz]

6013 gamit ko para mas madaling sumindi kahit mababa ang amperage

[@goatlinkcyclingchannel263]

Thank u bro!

[@BikeSession]

Nice one idol good job

[@Tuy233]

nice one idol.. thankyou sa vid.

[@iangordo4466]

pwede po ba kapag fixie ang ginamit na bike at fixed gear hub din ang gagamitin para dito?

[@Kulikutz]

Pwede din naman.. Mejo maliit nga lang at stressfull sa gulong mo..

[@yunusbalc2663]

hello nice system. How can we reduce the sound

[@Kulikutz]

one of the hub has a misalign ball bearing housing causing that loud noise but the other one is silent.

[@survivor3918]

step by step sana lodi Procedure po

[@christiandaveflores8057]

Whats the exact size between the hubs?

[@Kulikutz]

8inches in between two hubs .

[@thesilentmtbrider2478]

kaysa pobang gulong ng mtb po?

[@Kulikutz]

Kasya naman po basta 2.25 pababa lang.

[@thesilentmtbrider2478]

@@Kulikutz anong hubs yan po lods nong akin kasi stock hubs lng dn yon sa bike ko kaso di mag kaysa huhuhuhu 27.5x2.25 yon size nang gulong ko

[@Kulikutz]

Wala syang tatak pero Stock hubs ng foxter.. Pinutol ko yung part ng sabitan ng spokes para kumasya ang gulong ng mtb..

[@jarioalves]

Barulhento 😮

[@abstra4560]

Ano po title ng song kuya? Parang ang realxing pag nasa ride ka

[@Kulikutz]

di ko maalala title pero try ko hanapin sa playlist ko kung andun pa.

[@abstra4560]

@@Kulikutz sige po

[@Kulikutz]

Ito na po sir.. Hehe.. kzbin.info/www/bejne/lZCmg4p7YrFna80

[@tadejpogacar5637]

parang hindi kalalakas dito sir kasi walang laman ang sipa, prq mailarawan ko pra kang nasa lusong pero halos wala kna maipedal, parang ganyan ang feeling sa nakita ko habang pumipedal ka sa video

[@gabriel6195]

kasi ginagamit nya yun malaking cogs sa likod?? duh? May ganyan ako.

[@tadejpogacar5637]

@@gabriel6195 keep it up sir, sana lumakas ka

[@gabriel6195]

@@tadejpogacar5637 Already i am.

[@loonirides]

😎👍❤

[@gabrielsababan9305]

Mabilis ba maka sira ng gulong yan

[@Kulikutz]

Di naman po gaano lalo na po pag makinis ang pagkaka grinder nung edge..

[@buhaysingapore7399]

Ride safe po ka biker!Sending support from #"Bikers x Engineers in SG

[@Kulikutz]

Thanks sir, i hope kilala nyo din po si bike session jan sa SG,pa regards nalang po.. Ride safe po always.

[@argeeonaler1911]

Gumawa ako knina😶 hndi nagmomove gulong ko,umiikot namn hub ko,ang hirap padyakan prang sisirain ko n kadena ko,any tips idol

[@Kulikutz]

baka na subrahan mo po ng higpit yung bearing. dapat maganda freewheel ng dalawang hub pag inikot mo individually.

[@arnoldnazaire6154]

Bakit parang bigla dumudulas yung gulong sa roller?

[@Kulikutz]

either madulas or di pantay yung hubs.

[@fideldecastro4663]

Mag kano pagawa

[@benedictmangundayao9941]

Nakakapag freewheel po ba?

[@Kulikutz]

halos wala pong freewheel.

[@andreaguljoran3979]

Pwede po ba yan sa mtb?

[@Kulikutz]

yes po..na try ko sya sa 2.10 na gulong ok naman po.

[@joeonejoeone]

Got it for a shorter kid and his bike was too small for it

[@lancetheexplorer2264]

Ilang feet yan sir? Pahinge ng sizes

[@Kulikutz]

8inches pagitan po sir

[@lancetheexplorer2264]

@@Kulikutz hub to hub 8 inches?

[@Kulikutz]

Yup.. Nilagyan ko din ng option para sa 29er..10inches naman distance ng hubs

[@lancetheexplorer2264]

Pano pag 26er? Ilang inch?

[@Kulikutz]

Pasok sa 8inches..

[@gabriel6195]

anong measurement sa harap?

[@Kulikutz]

yung attachement ng fork? adjustable po since iba2x sukat ng mga bike frames. pero kung yung distance ng bawal Hub, 8inches.

[@gabriel6195]

@@Kulikutz salamat sir. may ganyan din po ako. Planning to make an extension kasi. Medyo hassle nawawala alignment gulong sa hubs. Gawa ko kahoy sa attachment ng fork.

[@n00bm4str69]

Magkano lahat na gastos mo rito?

[@Kulikutz]

450 po lahat kasama welding sir..

[@lestermanguiat4463]

Pede din ba sa mtb idol?

[@Kulikutz]

yes pwede sya..

[@piz179]

But my whole bike is moving,so my tire in rear is sticking to the side of the hub.

[@echoko264]

Depends to the wheel if mtb use 1.95 tire

[@altairlucio3375]

🤔👍🚴🇧🇷👏

[@benedictmangundayao9941]

Nakakapag freewheel po ba?

[@Kulikutz]

Di po gaano sir.