Making A Custom Semi-Hollow PRS

  Рет қаралды 13,697

Dylan Schuurmans

Dylan Schuurmans

Күн бұрын

Instagram: / horsefighter_69
Specs:
1-Piece Mahogany Body (Semi-Hollow)
Bookmatched AAA Flame Maple Top
1-Piece Mahogany Neck
Rosewood Fretboard
24 Nickel-Sliver Frets
Guyker Locking Tuners
Hipshot-Style Hardtail Bridge
Schaller Strap Locks
Neck Pickup: EMG 60 Gold
Bridge Pickup: EMG 81 Gold
1 Volume, 1 Tone, 3-way Toggle Switch
Crimson Stunning Stain w/ Danish Oil Finish

Пікірлер
@ericrockwell6714
@ericrockwell6714 Жыл бұрын
Very cool video! Love that jig you made for the neck mortise. Definitely learned a few things for when I eventually attempt a build. But when you were hogging out the body and that drill press bit your hand… ouch!
@JamesJones-yt8df
@JamesJones-yt8df 4 жыл бұрын
Love it this is a beautiful process......
@horsefighter_69
@horsefighter_69 4 жыл бұрын
Thank you. It's a lot of work, but it always ends up paying off.
@steffomca762
@steffomca762 28 күн бұрын
Did you injure your left thumb?
@jeremyy22
@jeremyy22 2 ай бұрын
Good work on the build, but as an emt, the way you worked with your router made me shudder. Glad you're okay, but take the extra time to do it safely. Great work
@renanspinella8379
@renanspinella8379 10 ай бұрын
Hope your thumb is well!
@horsefighter_69
@horsefighter_69 10 ай бұрын
Haha, thanks. It recovered pretty quickly
@chriss2452
@chriss2452 Жыл бұрын
How was the bird inlays on the fretboard made?
@horsefighter_69
@horsefighter_69 Жыл бұрын
This was a factory neck, but with inlays like this you need a CNC, it's very difficult to do by hand
@Allguitarinfo
@Allguitarinfo 2 жыл бұрын
. ..respect to you for the build...
@tomr1056
@tomr1056 2 жыл бұрын
All that work and you didn't want the top smooth? Glossier? It had scratches on it...
@horsefighter_69
@horsefighter_69 2 жыл бұрын
Personally, I like the slightly rougher feel. It does look and feel better in real life than on camera.
@toon6476
@toon6476 4 жыл бұрын
What went wrong with the top? It looked like you were going for a burst, but that didn't work out? I really love the end result, that color is amazing!
@horsefighter_69
@horsefighter_69 4 жыл бұрын
I guess the camera doesn't do it justice. The burst is very subtle, that's how like it.
@9voltfan2009
@9voltfan2009 2 жыл бұрын
@@horsefighter_69 Happy Christmas Eve!
@ChrisFranklyn
@ChrisFranklyn 4 жыл бұрын
Really cool. Wasn't sure about green and gold... but I'm often wrong :)
@ChrisFranklyn
@ChrisFranklyn 4 жыл бұрын
GREEN!? I meant the red. :)
@horsefighter_69
@horsefighter_69 4 жыл бұрын
Haha green can look good with gold too. It's difficult to pull off with red, if you use a brighter red it looks terrible, so I made it a lot darker
@royyazzie6028
@royyazzie6028 2 жыл бұрын
Forgot too intonate it there that's probadly the next you'll know then it's time too rock out
@adipetir4268
@adipetir4268 3 жыл бұрын
Waaaaw amazing your skill...👍👍👍
@Diego-bv6cb
@Diego-bv6cb 4 жыл бұрын
dream of guitar, I am left-handed and it is ipossivel to find ... besides not having money too kkkk hug from Brazil!
@horsefighter_69
@horsefighter_69 4 жыл бұрын
Yikes, that's always tricky, there is definitely less choice when it comes to left handed guitars. Maybe check out Schecter, those guys might have a left handed model you like
@riftone9435
@riftone9435 2 жыл бұрын
Great work ! Cool
@geoffperkins8796
@geoffperkins8796 3 жыл бұрын
Awesome build. Would,love to have seen the router bits being used though.
@TheArmchairTheologian
@TheArmchairTheologian 2 жыл бұрын
Great 👍🏻
@jorgecardoso6671
@jorgecardoso6671 4 жыл бұрын
Geniol..👏👏👏👏👏👏👏👏👏👏🤟😉
@Hoellewood_Solutions
@Hoellewood_Solutions Жыл бұрын
You okay man? That look really painful
@horsefighter_69
@horsefighter_69 Жыл бұрын
It didn’t hurt that bad when it happened, it was really bad the next day though. It ended up healing fine, no permanent damage
@Hoellewood_Solutions
@Hoellewood_Solutions Жыл бұрын
@@horsefighter_69 that’s good. Reminded me of when I got too close to a spinning down table saw. Still aches some mornings
@horsefighter_69
@horsefighter_69 Жыл бұрын
Yeah, those are some serious learning points
@jorgecardoso6671
@jorgecardoso6671 3 жыл бұрын
Bravo
@trencad7840
@trencad7840 3 жыл бұрын
Can you make for me but i dont have money to buy it Hahahha
@fendicupang9183
@fendicupang9183 4 жыл бұрын
mantap bro
@Hunter_Stonestreet
@Hunter_Stonestreet 2 жыл бұрын
ouch
@fendicupang9183
@fendicupang9183 4 жыл бұрын
buat akustik bro
@jorgecardoso6671
@jorgecardoso6671 3 жыл бұрын
A vos y tus seres queridos
@jorgecardoso6671
@jorgecardoso6671 3 жыл бұрын
Hola geniol
@Hoellewood_Solutions
@Hoellewood_Solutions Жыл бұрын
General Kenobi!
@jorgecardoso6671
@jorgecardoso6671 3 жыл бұрын
Dios te bendiga siempre
@master_alienhead
@master_alienhead Жыл бұрын
Dude. All that effort. The result made me sad. I am sure you got what you wanted, and many would really like it, but damn dude.
Making a Telecaster from Reclaimed Wood & Epoxy
18:07
Dylan Schuurmans
Рет қаралды 27 М.
I Built a Resin Guitar Body in PRS Style - Full Build
16:24
Gitara Maker
Рет қаралды 281 М.
#behindthescenes @CrissaJackson
0:11
Happy Kelli
Рет қаралды 27 МЛН
I Sent a Subscriber to Disneyland
0:27
MrBeast
Рет қаралды 104 МЛН
«Жат бауыр» телехикаясы І 26-бөлім
52:18
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 434 М.
OCCUPIED #shortssprintbrasil
0:37
Natan por Aí
Рет қаралды 131 МЛН
A SUPER THIN Acoustic Guitar! NON-Traditional (Build #11)
27:59
OverNight Luthier
Рет қаралды 54 М.
This $25,000 Guitar Took 400 Hours To Make (Full Build)
29:51
Driftwood Guitars
Рет қаралды 1 МЛН
[GUITAR BUILD] Building a semi-hollow double cut guitar.
40:33
Adventures from the shed of dreams
Рет қаралды 93 М.
Blacktail Studio Gave Me Wood To Make This
28:47
The Wooden Hobbyist
Рет қаралды 242 М.
Telecaster scratch build - start to finish
18:13
CMR Woodworks & Guitars
Рет қаралды 84 М.
Making A Custom Stratocaster With Epoxy and Olive Wood
17:02
Dylan Schuurmans
Рет қаралды 653 М.
I carved a guitar out of a SINGLE BLOCK OF WOOD
22:57
tchiks guitars
Рет қаралды 1,6 МЛН
I build a guitar. semihollow lespaul type
24:40
NAKAGAWA GUITARS
Рет қаралды 65 М.
Beautiful Sound! Process of Making Electric Guitar. Korean Instrument Technician
33:12
프로세스 케이 Process K
Рет қаралды 529 М.
#behindthescenes @CrissaJackson
0:11
Happy Kelli
Рет қаралды 27 МЛН