Making a Duplicator Tool for the Lathe - Copying Tool

Fox builds a Lathe Duplicator tool. ...or is it a duplicator tool for the lathe? I mean, it doesn't duplicate lathes, it copies patterns you put on the lathe and trace with the tool... you get it. It's a copying tool, for the lathe! 😁
This tool was built specifically with an upcoming project in mind where we'd have to make a whole bunch of handles for some old chisels:
• Antique Chisels Restor...
#lathe #build #tool

[@kthfox]

Very nice!

[@richardnewton5057]

Thanks for the information in this video

[@paulmanhart4481]

Nice work and great video. Thanks

[@RustyInventions-wz6ir]

Very nice work mr

[@SculptyWorks]

Thank you!

[@electropancake1554]

“The one ring that rule them all”

[@SculptyWorks]

The one ring?

[@F5Tornado44]

I know it was in fast motion, but try turning the beveling bit real slow. They aren't meant to be turned fast at all. That's probably why you were getting the chatter.

[@SculptyWorks]

I will try it slower next time! 👍

[@pauldejesus9644]

GREAT VIDEO CAN YOU USE WOOD INSTEAD

[@SculptyWorks]

Thanks! 😊 You could make one out of wood, but it would be significantly more delicate.

[@AmandaViolinGirl]

I would be very afraid using that tool to cut the metal. (Forgotten the name of it.) Because of the many burns I have experienced as a result from seizures, (my epilepsy).

[@SculptyWorks]

When you have a condition that may cause lapses in awareness, it might not be a good idea to use power tools, no. At the very least one should take extra precautions! ❤

[@rayst.2934]

Why wouldn't you use wood instead of a steel plate

[@SculptyWorks]

The forces involved are pretty high, wood would easily dent/deform/break. Would have been a lot easier, but it wouldn't last. 😉

[@Pushyhog]

your wife said you better get that mess cleaned up:-)

[@bdgackle]

I have never seen someone put tape on a drill bit like you did. What is the purpose of that trick?

[@SculptyWorks]

It's a depth gauge, so I know when to stop drilling. 😉

[@bdgackle]

@@SculptyWorks Oh, that's a good idea. Thanks for replying!

[@SculptyWorks]

@@bdgackle 👍👍

[@TechTins_Projects]

Would this work with a brass rod instead of wood? I want to make brass curved decorations.

[@SculptyWorks]

Possibly! People freehand turn brass all the time, I don't see why it wouldn't work with a template. You just have to go slower. 😊

[@tominterrupto]

What is the wood cutting bit in the duplicator?

[@SculptyWorks]

It's one of the carbide cutting tools from the lathe (that one specifically is from HarborFreight).

[@rawbase8393]

Well done mate!! How is the bottom tool (the one that touches the template) held in place?

[@SculptyWorks]

Thank you! 😊 There are grub screws that go in through the bottom. That's what all the drilling and tapping was about. 😉

[@pchan4443]

We got computer graphics!

[@SculptyWorks]

Pixar, I'm coming for you! 😉

[@bvdkruijt]

I wonder how it works on brass

[@SculptyWorks]

Gonna give it a try sometime! 👍

[@alecmajor9]

How'd you make the template for the part?

[@SculptyWorks]

I designed it on paper then traced the shape on a piece of wood, cut it on the bandsaw, and refined the shape with files and sandpaper. 😊

[@alecmajor9]

Thank you for the response, I'll probably do that. Also happy new year.

[@SculptyWorks]

@@alecmajor9 Happy New Year! 🎆🎆

[@jamesferguson1054]

Get rid of those gloves before you lose a finger. NEVER WEAR GLOVES WHEN OPERATING EQUIPMENT THAT CAN GRAB A GLOVE.

[@user-um4eo5kg2t]

Sell me this tool plz

[@SculptyWorks]

But I need it myself!

[@sahanachannel]

:O

[@SculptyWorks]

😁