Making a homemade Band Saw (part2 / the wheels)

[@Paoson_Woodworking]

Band Saw Plans: bit.ly/2JisRjf

[@hadeelolwan3551]

Thank you, your work is very wonderful and special. I follow you from Palestine and I have a problem that the saw breaks weapons constantly.

[@edlingerkurt4329]

Endlich einer der zeigt wie einfach man die Räder erstellen und abdrehen kann

[@timtailor75]

Dann schau dir mal die Videos von Matthias Wandel oder LetsBastel an. Die wuchten die Räder im Anschluß wenigstens.

[@edlingerkurt4329]

Die kenne ich doch alle schon, aber keiner überdreht seine Räder so effizient wie hier gezeigt, ohne jede zusätzliche Einrichtung

[@timtailor75]

Du meinst abdrehen, oder? Macht doch keinen Unterschied ob man die jetzt in die Bandsäge einbaut und dann abdreht, oder auf die Werkbank montiert und abdreht. Beide Wege führen zum Ziel, und ich find beide nicht mehr oder weniger aufwändig. Aber wie gesagt, hier fehlt mir das statische Auswuchten.

[@Paoson_Woodworking]

Hallo! In dem Artikel auf meiner Website spreche ich über das Auswuchten der Räder, sobald sie auf der Bandsäge montiert sind, kann man es leicht machen

[@BillSinWorkshop]

Love this series of the band saw. I think is the best one on youtube. Clean, easy to understand and awesome design!!!

[@Paoson_Woodworking]

thanks!

[@craftwerk6762]

most beautiful bandsaw i found on here. Think i'll buy the plans when I'm finished to renovate my workshop. Awesome handcraft

[@Paoson_Woodworking]

thanks!

[@giorgiodiys3251]

Devo ripetermi e confermare quanto tu sia un modello per noi makers. La mia passione per la lavorazione del legno e la mia esperienza lavorativa mi porta giornalmente a vedere più video possibili, valutare oltre che imparare da tutti e in tutto il mondo nuove tecniche e prendere spunti per nuove idee. Ho visto realizzare tanti band saw, ma onestamente il tuo progetto credo sia condivisibile da tutti in rete. E' semplice, lineare, pulito sia nel progetto che nella realizzazione e nella scelta dei materiali. La buona produzione del video per gli aspetti di comunicazione sono di esempio e stimolo a nuovi makers, credo che la soddisfazione più grade per noi, sia realizzare un progetto che nel suo insieme oltre alla funzionalità non abbia nessuna cosa da invidiare ad un prodotto industriale, e tu ci riesci sempre. Bravo per la tua attività e per il tuo impegno didattico.

[@Paoson_Woodworking]

grazie mille per le tue parole gentili!

[@berkc06]

I don't know why but your videos are so relaxing.

[@Paoson_Woodworking]

thanks!

[@ambroscustom]

Really a fantastic work you have done. I am surprised that how you made this band saw with very limited tools.hats off to you fellas.great project.

[@MoldingWood]

This is a good design for plywood, I look forward to the next part ..

[@Paoson_Woodworking]

thanks

[@tamerel-shamy4743]

really ,you are the best woodworking youtuber . you have your own style ( simple,warm,fast and it's all free) keep going REPLY

[@Paoson_Woodworking]

thanks!

[@josemanueldelafuentefernan5127]

Ya está? Leches!! Que cortito se me ha hecho!! Muy cuidado y un trabajo realmente limpio. Gran trabajo y con ganas de mucho más. Un saludo desde Ponferrada

[@Paoson_Woodworking]

Jose Manuel de la Fuente Fernandez gracias Jose! Queda una última parte, la subiré en unos días

[@MakingHuertasstuff]

Impresionante, tienes unas terminaciones que mas de una marca quisiera, un lujo verte trabajar, un saludo

[@Paoson_Woodworking]

muchas gracias compañero!

[@Thesidingsworkshop]

Very clean crisp tidy work

[@Paoson_Woodworking]

thanks!

[@youtumalaga58]

Hola Suso, Me gusta mucho tu sierra! Como todo lo que haces. Voy a ver la parte 3 a ver como queda. Un gran saludo

[@joser1219]

Great build. Can't wait for the final product.

[@Paoson_Woodworking]

thanks!

[@arandafotografia]

Beautiful design!. Es un placer verte construir máquinas. Estoy deseando ver el siguiente capítulo. ¡Enhorabuena!

[@Paoson_Woodworking]

Alberto Aranda gracias como siempre!

[@SergioMM.]

Me parecen super interesantes tus videos. Mi enhorabuena, ya que sigo gran cantidad de canales y puedo decir que es uno de los mejores en cuanto a acabados, diseño, montaje de video, explicación. En definitiva gracias por compartir estos videos. Un saludo.

[@Paoson_Woodworking]

muchas gracias!

[@walfredowalsao8011]

Talento nato. Empresas deveriam contrata-lo para desenvolver projetos inovadores. Sucesso sempre.

[@mathiaspereira6680]

Muy buen trabajo! Hace tres semanas que terminé mi sierra de cinta casera, que fabriqué, inspirado en la de Matthias Wandel.. La próxima que haga me inspiraré en este diseño!!! Excelente diseño.. Felicitaciones!!!! Un saludo desde Paraguay

[@Paoson_Woodworking]

muchas gracias compañero!

[@alvarenga512]

Hey that's a very professional work! I really do not understand people who dislike this kind of videos.

[@MRcustomcrafts]

Impresionante va a quedar, como salida de una fábrica.

[@Paoson_Woodworking]

Loquesemeocurra muchas gracias compañero!

[@ASousaMakesIt]

For sure better them many BandSaws we see on the market! This guy is a machine it self! :)

[@binhvo6920]

Quá đẹp ! Độ chuẩn xác 99,99% ông rất kỷ! cho ra cái máy cưa thẩm mỹ độ cứng cáp bền . Sử dụng mục đích chuyên nghiệp lâu dài cho công việc ! Tôi đã xem nhiều clip chế tạo cưa lọng bằng gổ nhưng cũng như ông họ làm cũng đẹp mắt nhưng không thể bằng ông làm. Cám ơn ông rất nhiều. Tôi cho ông 6 sao.

[@gianlucarepole5881]

Complimenti, è un lavoro bellissimo, fatto veramente ad arte. Bravissimo....

[@NickkkOnTube]

I love this rubber band idea!

[@Paoson_Woodworking]

Nikolaj Ruppert thanks Nikolaj, it works well!

[@jeremygonzales663]

Sick man. You're a true craftsman 👍

[@Paoson_Woodworking]

thanks

[@ruslanmukhametianov4069]

Очень круто! Отличная работа!

[@carlosmariocruzmendez7736]

Me encanta la forma enque trabajas te esta quedando muy bien espero el proximo video saludos.."

[@Paoson_Woodworking]

muchas gracias!

[@PietroMaker]

Very very very interesting and cool project !

[@Paoson_Woodworking]

thnaks Pietro!

[@berniesr]

You always make nice projects and this is no exception

[@Paoson_Woodworking]

thanks!

[@Antoniolima-re8fs]

Ficou muito bom você é ótimo. Muito bom seu trabalho. Obrigado por me enviar o vídeo. Valeu!

[@Juschius]

It is just amazing. Big big thanks for this.

[@Paoson_Woodworking]

thanks

[@JAVIER-rt4gk]

Impresionante!!!!! de verdad cada vez me gusta más, enhorabuena un abrazo

[@Paoson_Woodworking]

gracias Javier

[@TheGuiltyDave]

Great work, look forward to part 3 😸

[@Paoson_Woodworking]

TheGuiltyDave thanks

[@loadzofhobbies4219]

Beautiful looking machine.

[@Paoson_Woodworking]

thanks!

[@ivantorr]

I just watched your bandsaw video today, 03/17/2023 and have to say that it’s very impressive what you have built! I only need to know how much it costs for hardware and the wood.

[@tq2655]

Looking very good sir.

[@Paoson_Woodworking]

thanks

[@gianlucasalvador3691]

Woowww, just seen the video... digging in right now!

[@ShaukatHakim]

Again beautifully done!

[@troppysholzhuette]

a very good video. I am looking forward to the next part

[@Paoson_Woodworking]

thanks as always!

[@desideriapez7779]

impresionante!!! otro proyecto a la mochila, un saludo!

[@Paoson_Woodworking]

Jordi Lopez Font gracias!

[@Paoson_Woodworking]

If you'd like to help me, you can upload subtitles in your own language following this link: kzbin.info_video?ref=share&v=QFE_YJvSOCo Puedes contribuir con subtítulos en tu idioma en el siguiente enlace:

[@PietroMaker]

Paoson WoodWorking o yes ;) !

[@galelisimo]

I speak spanish and I'll be happy to do the subtitles for you, can you send me the plans?

[@reinholdpoier1791]

German subtitles available - muchos saludos!

[@mehmethanaydn3113]

Congratulations, it's really great.

[@Paoson_Woodworking]

thanks!

[@Blisteringbarnacles2]

Genius.... I wish my brain worked the way yours does.

[@juankoers]

Esta vez te has superado a ti mismo, enhorabuena.

[@Paoson_Woodworking]

muchas gracias Juan, deberías animarte a fabricar la tuya! :D

[@victor89]

Una pregunta, si los volantes en vez de ser de madera se hacen de metal también deber tener esa forma redondeada? Los modelos comerciales los tienen planos (creo). Enhorabuena por el fantástico trabajo.

[@Paoson_Woodworking]

creo que siempre van curvados, pero si el metal no lo está. lo está la goma que lo cubre. Gracias!

[@alinioanmoroi1370]

Very nice job...i enjoy watching your videos...keep up...👌👌👌

[@maximecombel4859]

Amazing work!

[@Paoson_Woodworking]

thanks!

[@Igor-jr7kb]

Супер!!!! Всё гениальное просто!!!! Так держать!!

[@alaricy]

a real masterpiece

[@Paoson_Woodworking]

thank you

[@martingutierrez1155]

Felicidades un excelente trabajo saludos

[@Paoson_Woodworking]

gracias Martin!

[@lawrenceogden8682]

A BRILLIANT MACHINE WELL MADE

[@raulsoto2088]

Incredible Job.. You are the best.. 🤝👍from Chile

[@kenmac6888]

what length blade is used? what is the largest width of board can you resaw? awesome video.

[@Paoson_Woodworking]

hi Ken, here you'll find all that info: www.paoson.com/blog/en/homemade-band-saw-n100/

[@ivantorr]

Sorry, but just wondering how much will building this cost, putting together all the hardware and wood needed? Thx for your reply Ivan

[@michelevaiarelli860]

grande paoson complimenti bel lavoro sei sempre bravo

[@Paoson_Woodworking]

grazie!

[@DanielVeillard]

Good job, interesting design, I already built Mathias's version but I might be tempted to make another one. Drawback is that the shaft is turning, advantage is it simplifies the design and allows to put the transmission in a cage free of dust. Good thinking ! :-)

[@Paoson_Woodworking]

I'm glad to see you here Daniel! thanks

[@DanielVeillard]

Thanks for your channel, so much interesting content :-) ! People should also visit the forum for further details www.paoson.com/forum/ !

[@VasilENKO85]

Nice work

[@Paoson_Woodworking]

DIY & Crafts thanks

[@tjacksonwoodworker3726]

excellent work.

[@Paoson_Woodworking]

thanks!

[@WoodworkingBarcelona]

Eres un crack. Haces que parezca fácil 😎

[@Paoson_Woodworking]

muchas gracias Lluis!

[@amielmeza3564]

Can you cut metal with that saw changing blade?

[@froilansantos6259]

".....Very excited to see the next video Senor Suso....Excellente....!"

[@Paoson_Woodworking]

gracias Froilan!

[@pierreboone568]

Great Video, and nice work.

[@Paoson_Woodworking]

Pierre Boone thanks!

[@JoeDavis82]

This saw is going to give Matthias’ (which I built his saw) a run for his money.

[@eln74]

Wow, it's looking bro, tns for sharing it, can't wait for the next vid!!!

[@briggal1]

Hi, I have bought your plans and I am in the process of building the bandsaw. Could you give me more details about the polyurethane glue you use to hold the wheels to the calibrated rod so that I can get the correct glue please? Great video and plans by the way, really enjoying building it and looking forward to using it. I have looked at a number of bandsaw builds on KZbin and yours is definitely the best, Thanks

[@Paoson_Woodworking]

hello Allan, you can use any glue that sticks wood and metal, and expands when drying. Email me please, I can help you better

[@zarkantees]

What is the powder that you apply before sticking?

[@Vibemaker68]

that's pretty awesome

[@VENKOwood]

*Cool job*

[@Paoson_Woodworking]

VENKO wood thank you!

[@tykellerman6384]

Very nice job

[@Paoson_Woodworking]

Ty Kellerman thanks!

[@YuraKvadrat132]

Hooray. Continuation)))

[@Paoson_Woodworking]

kvadrat132 thanks as always! :D

[@ramosoficinadamadeira5510]

Ótimo trabalho ficou muito boa

[@SISTEM1976]

Great videos like always,all the best man!

[@Paoson_Woodworking]

thanks!

[@simpleidea2470]

Very nice

[@gianlucasalvador3691]

Great job! Now the bad part: waiting for the next part... ;) Just a question: don't you need to balance the wheels?

[@Paoson_Woodworking]

Gianluca Salvador thanks Gianluca, you're right. I explain that in the article of my web. "We must also ensure the wheels are balanced. For that, we turn them slowly on their bearings and check whether they tend to turn more towards either side. If that's the case, we only need to make some holes on the wheel from the front to remove some of the weight on the side the wheel is moving towards"

[@arkadiuszochnio5603]

Would i be able to scale plans down to make the same but smaller bandsaw as got limited space and a benchtop bandsaw in desprate need of a replacment.

[@arkadiuszochnio5603]

Really interested would be willing to pay a little more to buy the plans for the scaled down version to accept a small induction motor from the Energer ENB539TAS 200mm Table Saw 230-240V and to accept a 56 1/2 inch blade lengh

[@Heretico1]

Increible! no puedo esperar a ver el proyecto terminado! :D Algún día me animaré a hacer algo similar, probablemente salga un Frankenstein ni parecido a lo tuyo.... y me termine matando en el intento de hacerla andar jajajajja

[@Paoson_Woodworking]

gracias Jose, con un poco de práctica y paciencia se puede hacer!

[@SirScapa]

Very elegant bandsaw, i folow it vith great intrest. :)

[@Paoson_Woodworking]

Ulf Jönsson thanks!

[@jenspiske7590]

Awesome! Thank you. 👍

[@Paoson_Woodworking]

Jens Piske thanks!

[@yvesnepveux3757]

It is a very goog working

[@QwertyGrodnoWood]

Good job)

[@Paoson_Woodworking]

thanks!

[@alejandro-dk9yx]

desde ARGENTINA gracias por compartir

[@cherhanamiya1]

HI SUSO just watched the video & noticed that at 11:23 you put the lower wheel onto the Calibrated shaft & " spin it up " whereby it looks to be " running out " is this in actual fact true i,e. is it running out ?

[@brock2306]

Awesome job! What size blade are you using?

[@Paoson_Woodworking]

They are 2490mm long, here you can find them: www.paoson.com/forum/364s/band-saw-accesories

[@wilmanmacas4830]

Que buen trabajo maestro saludos desde Ecuador me gustaría saber el diámetro de las poleas las que ajustan la sierra cinta gracias de antemano

[@bobuk5722]

Hi. It would be very useful to give the wheel diameter in the write up. A short machine specification would also be good. Cut depth and cut width? BobUK.

[@hervefahrner9906]

Quel est le type de revêtement sur les roues? Avez vous un lien?

[@Mikemacs1]

I like it 👍🏻👍🏻👍🏻

[@Paoson_Woodworking]

Mike Wiegel thanks Mike!

[@cherhanamiya1]

HI SUSO WHAT SIZE MOTOR DID YOU USE ON THIS BUILD PLEASE ? HAVE YOU FOUND THAT THERE IS ANY RACKING OR TWISTING WITH THE BUILD ?

[@Paoson_Woodworking]

hello Robert, here you'll find all the specs: www.paoson.com/en/blog/homemade-band-saw-n100

[@panayiotis140]

What program did you use to make the plans?

[@opasworkshop8373]

Bravo my friend two thumbs up!👍👍 are you going to have plans available for this project?

[@Paoson_Woodworking]

thanks!

[@bramhijman4829]

Wow that is so nice ! Keep on going m8

[@Paoson_Woodworking]

Bram Hijman thanks!

[@bramhijman4829]

Paoson WoodWorking what kind of bands do you use around the wheels?

[@Paoson_Woodworking]

take a look: www.paoson.com/forum/368s/an-elastic-power-band-instead-of-a-rubber-bandsaw-tire

[@bramhijman4829]

Paoson WoodWorking thanks! Very nice that buy-list from some countries !!

[@nathankidz]

Next video... tomorrow 😁

[@paulmarks8401]

Made it easy to understand with out big Word,s thank,s again sVery Help full Keep it up That,s why I subscribed Later Paul

[@داوودمحيالدين]

عمل متقن بجد

[@محمدالعراقي-خ5د5ظ]

I love you man

[@criarttub2153]

Ótimo trabalho parabéns e likezão

[@Paoson_Woodworking]

Criart Tub obrigado!

[@criarttub2153]

Paoson WoodWorking esse e meu projeto kzbin.info/www/bejne/qJqtpIh7h613pck

[@Paoson_Woodworking]

nice project!

[@criarttub2153]

Paoson WoodWorking obrigado

[@callumsimpson4521]

What drill stand do you use, thanks.

[@Paoson_Woodworking]

take a look: www.paoson.com/forum/viewtopic.php?t=204

[@Anuxr]

Amazing! Eres un genio Suso!

[@M_o_d_e_s_t]

Why do you sprinkle pepper glue seam when gluing?

[@Paoson_Woodworking]

it's salt, check this out: www.paoson.com/blog/en/woodworking-tips-and-tricks/

[@M_o_d_e_s_t]

Thanks a lot for this trick. You have a very useful website and the right approach to craft.

[@kyleabril3856]

What engine do you use

[@Paoson_Woodworking]

plans available here: www.paoson.com/shop/76-band-saw-plans.html

[@ernestoramirez3450]

Paoson WoodWorking ii

[@cherhanamiya1]

Many thanks SUSO So glad you've pointed me in this direction as i wasn't aware of it's being. Sometimes the videos go so quickly that i'm not able to take all the subtleties in at once ( age thing )