Making a Massive Hammer

[@RIBill]

It looks awesome and I know it's entirely for appearance. However, I would have eased all those sharp edges to keep them from being stress risers for the inevitable time when someone DOES hit something with it or drops it or whatever.

[@VG-or1nu]

Yeah but it looks swag tho

[@thelt4255]

yea round those so it dont crack please it looks dope

[@Volt64bolt]

I would say just a nice small chamfer would work just fine and keep the astechic

[@karimjewelry]

🙏🙏👍👏

[@billozy]

Those edges give you +10% critical hit

[@SilvaTheLegoViking]

I’ve been watching your videos for almost two years now and this is the first time I’ve commented. Awesome work!

[@JarrellHall]

With this and the Dwarven knife. You earned yourself a subscriber and soon a customer!

[@ΜΞΔΣΛ]

Wow it’s great craftsmanship, Odin will love this

[@TheLordofthewolf]

blacksmith Andre of Astora would be proud of you and your work

[@UniverseUA]

The hammer is so perfect the thumbnail looks like a render

[@dclipper8052]

A round handle is fine for a bat or a club but not for a weapon that needs to be clocked a specific way. I would suggest gluing leather strips lengthwise along the front and back of the handle to make it oblong and then wrapping the whole thing.

[@kvnmg]

It's thor's hammer. Beautiful ! Thank's for this video ❤️ 😊

[@nickdavis5420]

A fine workout tool

[@unnatiatram1409]

Great work you had done salute you

[@strokerace5468]

WOW. Very nice job

[@Valhalla3826]

Beautiful craftsmanship

[@knucklecorn]

This is the Square Hammer Ghost told us about

[@vinceianni4026]

Hello Koss beautiful hammer beautifully made beautiful designs well done friend

[@lindawallace6750]

BEAUTIFUL !!!

[@creativeinhead965]

Wow! it's just PERFECT!!! I can't believe my eyes... It's just GREAT. Thanks👍

[@lordofgraphite]

This is absolutely ridiculous, I love it

[@ВалерийБеликов-щ1н]

My friend... The Cool Cool Cool.

[@chrisgenovese8188]

Love it! you have such a recognizable style that is very pleasing to the eye.

[@AlreadyDeadInside83079]

Gorgeous

[@pjhalchemy]

You never cease to amaze me with your ingenuity, craftsmanship and designs, Koss! Beautiful work and superb etchings. Must have taken a lot of time, plus the heat treating. Surprised you didn't chamfer the faces though. Thanks for the Treat as Always...magical!!

[@northwales1000]

Make for a great Lament configuration hammer. Have the various design on each facet

[@kirillch]

I like the video. Beautiful thing. However is it legal to post such flashes from welding

[@connorbest2121]

now that’s what i call a machinist’s hammer.

[@Destros2ndone]

that's one crazy cool looking hammer :D

[@Dev_2R]

I was disappointed when you didn't try to cut paper with it. Super cool hammer though, I always love your workmanship.

[@Scrogan]

What’s the etching electrolyte?

[@AmiraliKianfar]

Nice !! But handle is very short!!! Well done good job

[@MeltAbilities]

Like always… ‼️Nice‼️

[@АнтониоПетров-я7щ]

Дорогой Брат, шикарный получился молот, достойный самого Бога Грома Тора!!!! Да ещё в скандинавском стиле!!!! Лайк, респект и море уважения!!!!😎😉🙂☺😀😄🙄💪👌👏🖒👍🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺

[@Captainalexstars94er]

No Way koss, you making a Beautiful Hammer? That Looks so Cool 😎

[@butterflywoodworks2374]

Question for the machinists, why use a surfacing grinder to square up the stock rather than the mill?

[@koalabro6118]

Asked my pops - who has been a Machinist for as long as I've known him - and he said that the big thing about surface grinders is that they are *high* precision. Mills are high precision (precision within a thousandth of an inch (0.001 of an inch)), but surface grinders are comically so (precision within a micron (1/26,000 of an inch)). They are also incredibly slow, if used properly. Dude here is taking a larger depth of cut than he should, and has a higher stepover than he should, as is evidenced by his surface finish. Most likely, this dude doesn't have a mill, and is merely using what he has available to him.

[@koalabro6118]

wait he does have a mill wtf.

[@butterflywoodworks2374]

@@koalabro6118 , thanks for that.

[@CJ_7519]

Thor would approve👍🔨!!

[@joeblow9891]

I really love your content since I discovered you, but it would be amazing if you would test your absolutely beautyful pieces of art at the end. I would have like to see you hammer something or at least happer your wood bench !

[@jimtaylor6663]

That is so cool!

[@vladimirkovacevic1656]

awesome hammer

[@moneyfornothing3264]

Beautiful!! 🔥

[@RestorationAustralia]

Very cool.👍

[@YooProjects]

Special project. I like the engraving style. 💫

[@juanjo5534]

If every hammer be like that, we would all be carpenters.

[@jerryjohnsonii4181]

Spectacular Hammer !!!!!!!!!!

[@firstname1661]

New version of Thor, the mighty God of Thunder... Wonderful job..

[@dwilliams321]

I think it would look great with a 45° chamfer all around, but it's so good looking without it too!

[@infamoushacker4chan883]

9:38 Bro, why does your MIG sound like that? What is your voltage on?

[@tinyfin981]

Koss that’s absolutely beautiful man. You’ve outdone yourself with this one.

[@octopus2327]

ikr

[@Koss-channel]

thank you =)

[@SSKfamilytv]

Amazing skills 👏 good job👍

[@diyresttube]

thats really a beautifull hammer..its like a masterpiece.

[@SamakUp]

Beautiful

[@styx5977]

Imagine making that beast out of titanium 💪💀

[@kennyspratling9386]

Beautiful hammer. I bet taking a bronze wire brush to the center section would have looked awesome too. But still a very beautiful hammer

[@lilllamaboi]

Why surface grind the rough shape? Why not face mill it first to save time on the grinder?

[@andymurphy9016]

The sharp edges look dangerous, though. Why not round them a bit?

[@maxo9711]

Good job 👍

[@madwilliamflint]

Nice work as always. Really love that etching technique. I'm going to have to give that a try. I wasn't sure why you didn't do your surfacing on the mill with a fly-cutter. But then I walked it through in my head and realized I had no idea how to secure the workpiece.

[@WinchesterxNL]

Whosoever holds this hammer, if he be worthy, shall possess the power of Koss.

[@Air-l5u]

This is not a hammer. It's art.

[@ladyrosalynnn]

This rocks.

[@DH-.]

I would love to see an elegant equally intimidating nail an or rock chisel to match a set or something

[@bc8010]

I think it actually looked really cool straight out of the oil. Great results nonetheless

[@chain669]

Красавец Мьёльнир))

[@Official.ORIENTCAVALIER]

I see the insignia on the side of the hammer was heavily inspired by Legendary ent. logo. Looks ok, though

[@InfernoPhilM]

You’re going to have the most tender chicken ever 🐓🔨

[@CorbinMusso88]

Yeah, he can really beat his meat with that one.

[@mikean7074]

Why not human meat instead of an innocent creature?

[@Zildawolf]

@@mikean7074 chicken tastey

[@benjaelee]

@@Zildawolf -human tastey too- wait what?

[@Zildawolf]

@@benjaelee no it’s not

[@punknoodles0]

Yoooooooo...please be careful when grinding on the side of that wheel.

[@chrishuhn5065]

The pendant looks nice. Now hurry up and make a matching necklace. Mr T. is getting impatient.

[@RaccoonLex]

Really nice

[@johnbradford9235]

Had to pause the vid a couple of seconds in and go check outside to make sure the world was still there when I saw this wasn't a knife 😂. But I knew it was still gonna be a quality job and I'm not disappointed 👉👉👉. Lovely finish dude. Sure you don't wanna sneak a sliding blade in the end of the stock...? 😉😁😁😁😎

[@filipesiilva5602]

Can a hammer like this be used to forge?

[@zzAleksandrzz]

Отличная работа 💪👍🔥

[@davidhall8874]

How does that block stay in place with nothing holding it?

[@hugogarutti2071]

Nice work! How much does it weighs?

[@Rage.Slayer]

when u flat grinding this things didnt u need cooling lubricant that ur grind wheel dosnt go broke? and did the metal dosnt overheat and damage the structur of the metal. (English is not my main language xD)

[@tejaskondgekar5509]

This must be the little brother of Mjöllnir Mjollnir 😜😜

[@eddietowers5595]

Why does you lathe seem to change frequency every time you cut metal with it? Like the machine can't hand such light cuts. Though still an awesome piece

[@edgaraquino2324]

Well what about that! We have seen Thor's hammer in theory, now we have Koss' Hammer live & in living color! Beautiful work! P.S. The Hammer looks great as is, but may I suggest adding leather to the handle for esthetics & grip, along with a length of leather for a "wristlet" to give it a "battle hammer" look....

[@Zraeicro]

9:40 flashbang button

[@SkateboardCaes]

Koss, who do you deem worthy?

[@datta_girish]

Love It

[@jojo1711]

once again a real masterpiece congratulations for your work

[@MCsCreations]

Amazing, dude! Fantastic work!!! 😃 That's a real work of art! Stay safe there with your family! 🖖😊

[@aswd90]

"What do you plan to do with that hammer, friend? Bring down a house?"

[@persioboni9373]

Perfeito trabalho !

[@noodle478]

How heavy is it?

[@dantedragonico5238]

Thor: It's Good, but mine is bigger.

[@rhodie33]

Been watching your vids for awhile now and you always creating your own unique tools. Nice job Sir.

[@DIEGOLOKO82]

this reminds me of a song by Ghost

[@punknoodles0]

That's not a hammer... THIS ^ is a hammer.

[@NATO94]

how you did such a good job overall, makes me wonder how you weld so poorly.

[@paranoiia8]

Chunkus maximus!

[@geraldstamour1312]

🎶It's HAMMER time!🎵

[@scottcraft1000]

When it goes flying out the window don't worry, Thor just called for it lol

[@GarageArt]

Чудова робота

[@21street-erfication90]

Only those who are deemed worthy, may wield Mulnir.

[@SynthRockViking]

Wow looks so nice 😮 Im jealousss, that im too lazy to do shittt😭

[@SynthRockViking]

Btw must've taken a really long long ass time grinding those surfaces plane:O

[@BHLFPS3]

if i had this hammer there wouldnt be a day im not in the front yard trying to summon thunder lol

[@tobiasandersen1168]

The welding throw me off but Else good work

[@liih]

Stylised like a Miolnir

[@СергейХоффман-б7ц]

А можете сделать обзор на шлифовальный станок который в начале видео? Буду очень благодарен!

[@andriypetrunin9678]

Гарно. Краще пінцет купіть в стомат техніці) А ви звідки?

[@iBLiNXi]

your lathe sounds like its gonna blow the spinners off

[@scottmclean4237]

Artwork! Are you a metal smith by trade ?