Making A Mosaic Petty Knife From Ball Bearings

Want to buy a knife from me? See what is available here in the link below!
Website - www.jpbladewor...
Amazon Lists of tools I use:
(These are Amazon Affiliate Links and this channel gets a commission with no cost to you)
Starbond CA Glue Black - amzn.to/3um4wB9
Starbond CA Glue Accelerator - amzn.to/3SH37OZ
3/8-inch Bearing Balls Tungsten Carbide - amzn.to/46PU6XI
Drill Bit, Titanium, 3/8 In - amzn.to/3uTGcXm
16-Ounce Ball Pein Hammer - amzn.to/3t9dHUT
Diamond Sharpening Stone Extra Coarse (220 grit) - amzn.to/49FKC3P
Diamond Sharpening Stone Fine (600 Grit) - amzn.to/40NAhim
Diamond Sharpening Stone Extra Fine (1200 Grit) - amzn.to/49HAveY
Axe Wax (Food Safe) - amzn.to/47yXLKt
Renaissance Wax (Non-food Safe) - amzn.to/3RjPfJR
White Spray Paint - amzn.to/46yu8Id
Follow me on all my social media!!!
JP's Bladeworks Instagram- / jpsbladeworks
JP's Bladeworks Facebook- / profile.php
JP’s Bladeworks Twitter- / jpbladeworks
Jesus Perez Instagram- / jesus_perez

[@douglaswoodard3412]

man ignore the haters i like the voice over and i love the sheep's foot design good choice for the blade

[@JPsBladeworks]

Thank you. I appreciate the support

[@wouldiwasshookspeared4087]

Seriously, I hate the silent ones because I always find myself asking why they did something

[@KezAH-GT]

I concur I much prefer when people talk so much better then the quiet ones

[@michaelegginton7657]

I like your voice overs, much better than music that doesn't fit.

[@James-ql5nz]

I'm with the crowd here, man. The knife is great, and we love your voiceover style. I wonder if you're feeling weird about the handle because it's a little long compared to the blade length. I'm no expert, and it's a beautiful piece of art, so I guess all I'm saying is "be encouraged."

[@JPsBladeworks]

Nah, it's just that the handle feels like the handle is made too much for a chopper hold and not for a pinch grip hold. And i did that on purpose for aesthetics, but it feels out of place. I feel i should have gone with a smaller thinner handle. Looks cool anyways tho

[@jasonkibler9316]

A voice over is a huge help to explaining what’s going on, and how/why decisions go into the work. I personally don’t like when someone just works and doesn’t say anything.

[@JPsBladeworks]

I get bored. Im thinking of starting a channel with no talking for the haters and people who just like asmr. Two birds on stone. But on this channel id rather talk it out. It helps create community as well.

[@ariyanadumon4549]

I rather enjoy your voiceover. I like knowing why you're doing what you're doing and your thoughts on it. It's one of my favourite things about tour channel honestly.

[@JPsBladeworks]

You know it still surprises me people watch my channel 🙃

[@angusmclaren6257]

A great damascus pattern paired with a great handle pattern. Really stands out this one does. Nice work.

[@JPsBladeworks]

Thank you

[@whiteshadow1771]

I like the voice over. I like hearing each step explained. You also do awesome work.

[@JPsBladeworks]

Thank you. I appreciate it.

[@DONJUILIO]

I think it turned out great for a first go. Next time will be so much better. Thank you for your time..

[@JPsBladeworks]

Thank you for watching

[@aaronperkins4654]

I love your voice and voice over... don't let anyone tell you to do anything that you don't like or agree with...it's your life and your world..and love the work you do.. keep it up.. always room for improvement and one day you'll be doing Kyle royer quality

[@JPsBladeworks]

Have you seen his work? Man i dont think I'll ever have the patience that man has. Ive seen his work in person and man thats one huge goal to reach. I appreciate the kind words tho

[@dougkucsera-ry8fp]

Love the way everything you show us is not perfect but you make it work! Like the way you teach us tricks like WD-40! Knife came out gorgeous!

[@JPsBladeworks]

Thanks. Glad you enjoyed it.

[@tegaidayt]

Great looking knife. The handle makes the whole thing pretty distinct. Your voice overs are why I watch your channel, for someone with a passing interest in knife making himself, it’s a great educational experience!

[@JPsBladeworks]

I get one hateful comment to every 10 to 15 good comments on my voiceover 😅. Glad you are one of the 15

[@davidolsen7539]

That knife came out great. Especially for an experimental blade style.

[@JPsBladeworks]

Thanks

[@KrispyBizcut]

I think you did a hell of a job.. for someone that just starting knife making... Amazing!!!

[@JPsBladeworks]

I try my best

[@iamroy5993]

JP… another thought… A good practice with Damascus and in particular with the tiles to help get rid of the transition lines is to allow your billet to soak at welding temperature to allow for greater grain growth between the tiles.

[@PeteTobias503]

I enjoy the voiceovers, especially the parts where you admit you goofed, own it, and make a joke of it. I was laughing so hard the joggers in the park I’m having breakfast at looked at me like I was the crazy one. 🤣

[@JPsBladeworks]

Im pretty easy going. If things dont work out as planned then oh well. You learn something new.

[@ToddAMARANDO]

Don’t listen to other people, keep doing what you’re doing . The knife came out great

[@JPsBladeworks]

Thank you

[@ToddAMARANDO]

@@JPsBladeworks do you sell your knives and if so where would I go to buy one

[@JPsBladeworks]

@ToddAMARANDO i have my website in my video discription but unfortunately i dont have any knives available at the moment.

[@colejester161]

Hell yeah. I actually love the voiceover haha. It’s always funny and super relaxed.

[@JPsBladeworks]

I just do it off the top of my head when im done editing my video. As long as i dont mumble my words i send it lol thanks for the support.

[@johngrindel6822]

very interested in your forge build. PLEASE make a video of it. Yes there are already videos of it available, but I'm sure I'm not the only one who would like your take on it. Keep the great work coming.

[@JPsBladeworks]

Thanks. Will do

[@EK--ry3lr]

Really liking the voice over. Would love to see a forge build!

[@JPsBladeworks]

Thanks will do

[@LanishaEskridge-kq4be]

Love love love the voice 😊

[@JPsBladeworks]

Thank you

[@helenaalexandra4197]

fantastic work with the handle, i love how it complements the blade!

[@JPsBladeworks]

Thanks glad you liked it

[@dwayneburbridge3283]

I like how the patterns on the wood and metal are similar. Also, I truly appreciate your voice-overs! Well done!

[@JPsBladeworks]

Thank you

[@TonySeverioKnives]

Looking good brother. Pattern came out nice!

[@JPsBladeworks]

Thanks. Im happy with my first mosaic. It was a test run for another real pattern i have ready for tiling.

[@Little_River_Forge]

That surface grinder would have came in clutch squaring up your starting pieces. Love your ideas with Damascus. Bro you been making leaps in the game. 👍👍 stay safe in this Florida heat

[@JPsBladeworks]

Thank you. That sun feels like its searing the skin. Cant wait for August when the heat gets real good.

[@guillermoalfaro2714]

Nahh man?!!! That knife 🔪 came out out of this world that's what the other blades myths have to do when they do canister nice work 👏 👍 👌

[@JPsBladeworks]

Thank you

[@iamroy5993]

Good looking knife JP. I have been following your journey since you started. Nice progression my friend… Keep it going! Remember, the haters have probably NEVER picked up the hammer and have no clue what it takes!!!

[@JPsBladeworks]

Yea most are keyboard warriors that watched every season of forged in fire so they are not experts in the craft.

[@wolfparty4234]

I think the handle fits the knife very well…! Great looking over all. I’d be happy to have a knife like that. Well done 💪🏼👍🏼

[@JPsBladeworks]

Thank you

[@tonylyons5487]

Bro u frickin killed it anyone who is in the kitchen would love to cut with that knife a really work of art

[@JPsBladeworks]

Thanks. I appreciate it

[@TravisM0143]

I think it turned out really nice. I believe the handle shined up would be a really nice touch with that whole setup.

[@JPsBladeworks]

I should have given it a fresh coat of wax before the photos at the end. The pictures dont do that handle justice

[@jcubetube3778]

That was a great practice run! Can’t wait to see the next one 🔪❤️

[@JPsBladeworks]

That one will be really mosaic. I have the pattern done i was just afraid to tile it wrong so i did this one as a test run.

[@MichaelFarnum]

Very nice build. Would definitely like to see a video on the new forge.

[@JPsBladeworks]

That makes 2 now

[@lornacy]

Your voice over helped me learn 😊❤

[@JPsBladeworks]

Glad i could help

[@danieldurkton2942]

Awesome!!! Love the contrast between the blade and the handle. Very cool. Enjoy your Sunday….

[@JPsBladeworks]

Thanks, you too!

[@ghostsofthepastni4486]

I’m not a smith nor do I see a future where I become one. However, I love watching your content. It’s like we get to share a little bit of zen with you. Good work man

[@JPsBladeworks]

thank you im glad you enjoy the content

[@joshsater4044]

That's a fine little knife. That handle turned out gorgeous! Would love to see you build a forge. That's something that is kind of limited on KZbin among all the knife makers I feel like.

[@JPsBladeworks]

Im planning to build a forge with a rolling table so i can set it aside when not in use.

[@JtB72]

Great work, loving your builds all the way from the UK. If you think your rain is bad, don't come here in the summer.

[@JPsBladeworks]

Wait till the hurricanes start aiming this way. Thats when the fun starts.

[@TheRedWon]

Cool to see experimentation and learning in these videos!

[@JPsBladeworks]

Thanks. Glad you liked it

[@chrisd3884]

A work of art... Beautiful!

[@JPsBladeworks]

Thank you

[@mccaine1]

I'd love to see how the forge build is done!

[@JPsBladeworks]

Thanks will do

[@AaronBosterMD]

I love your voice overs! Another great knife and fun video. Thank you for making these!

[@JPsBladeworks]

Thanks for the continued support

[@bodiejay2859]

I love the knife. Keep the voice over. I would like to see you make a video of you building another forge. ~Kevin

[@JPsBladeworks]

Thanks. I will definitely be making a video of it.

[@Jaguarknight01]

Love the handle shape

[@JPsBladeworks]

Thank you

[@nickjades]

Hope you don’t let the haters get to you. I’m not even a bladesmith but I love the content and I catch every video. Good stuff

[@JPsBladeworks]

Nah haters are like less than 1% of the audience. I just like to rant 🙃 their opinions dont matter to me.

[@richardbryant7972]

Came out really good, I like it, great save on the delams

[@JPsBladeworks]

Thanks im glad it worked out

[@mccaine1]

That is a pure beauty of a knife. That handle is gorgeous!

[@JPsBladeworks]

Thank you. That wood is just gorgeous

[@loricurtis753]

Beautiful handle. It looks really nice.

[@JPsBladeworks]

Thank you

[@ChiefsFan62]

Very nice! Love the handle!

[@JPsBladeworks]

Thank you

[@darrenpautzke3795]

That is so cool. Great job. Thank you.

[@JPsBladeworks]

Glad you liked it

[@Marines_6711]

Don’t apologize for the camera footage bro! It’s YOUR VIDEO! If people don’t like it they can click on another vid!

[@JPsBladeworks]

My ocd doesnt like it but there isnt much i can do about it. The footage is the footage. I work with what i got. But yea if anyone doesnt like it they can kick rocks. No one is forced to watch anyones content on youtube.

[@landroveraddict2457]

Really nice looking blade and the handle is awesome.

[@JPsBladeworks]

Thanks 👍

[@am2261]

Protractor.....! An angle measuring tool is a protractor 😎 Loving the channel and your work too 👍👍👍

[@JPsBladeworks]

I haven't used one of those since geometry in high school 😅

[@am2261]

@@JPsBladeworks Alternatively you could use the Force! Half of a right angle.... And then a smidgen less again 🤣

[@dagnard5707]

looks great. i forget what the full process is but you can make the tiling lines disappear through heating the blade multiple times before heat treating. i do try to share some knowledge with you each video, and you can take it or leave it lol. you advancement continues.

[@JPsBladeworks]

Lol i appreciate the knowledge. The carbon migration is what helps blend those lines in and its done with heating the knife up and having the carbon migrate past the lines. The reason they are white is due to carbon loss when forging since those lines used to be the outside of the billet before being forge welded together.

[@dagnard5707]

@@JPsBladeworks i couldnt remember the proper name of it lol. i will check it up to getting older

[@Millergohogs]

That is a great looking knife. I would make that my go to kitchen knife.

[@JPsBladeworks]

It's a nice little knife for precision cuts

[@bjornronaldson6017]

Don't feel too bad about cracking the ebony, we have all been there. I trashed a $90 ebony block trying to finish a piece for Blade this ear, it happens. The knife looks awesome and I love the choice of hilting materials. They work really well with the damascus pattern!

[@JPsBladeworks]

Thanks. There tend to be sacrifices along the way. Sometimes its a piece of wood. Sometimes its a piece of hot scale on your hand. Sometimes its cutting yourself on your own knife. No one is safe 🤣

[@BALDA8511]

Хорошая работа, профессиональный подход, замечательный результат! 👍 Порадовало, что автор не побоялся показать неудачу в рукоятке... Не переживай - такое тоже бывает, даже Джеки Чан не стеснялся показывать в конце своих фильмов неудачные сюжеты. Ты - молодец и Удачи тебе! ❤

[@JPsBladeworks]

Thank you. I rarely get anything on the first try.

[@matthewf1979]

Have to use that surface grinder attachment more! Mosaic requires flat, clean and all the decarb removed if you want it to look really good. All those silver colored tile outlines are the decarb.

[@JPsBladeworks]

Yea i slacked on this one.

[@matthewf1979]

@@JPsBladeworks Still a cool knife though and you learned a lot!

[@magnoliaslim6802]

Very nice knife! I like your voiceover that way I'm not completely lost at what you're doing!😂

[@JPsBladeworks]

Ill keep them coming

[@magnoliaslim6802]

@@JPsBladeworks and I'll keep watching!

[@jaymartinez7654]

Once again, Master Craftsman at work! Love your work ❤

[@JPsBladeworks]

Thank you for the kind words

[@cosmo9882]

Very nice, love the handle material goes perfectly with the blade. 😎

[@JPsBladeworks]

Thanks

[@jeremyf5853]

Thank you so much for your videos they have helped me so much

[@JPsBladeworks]

Glad i could help

[@jeffreyhoops3611]

Nice knife! You keep getting better and better!

[@JPsBladeworks]

As long as im not getting worse 😅

[@kingjameson1318]

👍🏼👍🏼 awesome work keep it up man your getting better every project !

[@JPsBladeworks]

Thank you

[@flamefalconz]

This knife handle is really beautiful

[@JPsBladeworks]

Thank you

[@jasonleece9382]

That pattern is cool man another banger knife

[@JPsBladeworks]

Thank you

[@scottmccarroll2618]

Great job brother I’ve been watching since the beginning and loving everything keep up the great work!!!

[@JPsBladeworks]

Thank you for the support!

[@MiBurnout]

Newer sub.. I like the knives you build, the video edits are cool and fun to watch while I'm spliffin.. I love that handle color, would love to see it on a big bowie with a brass crossgaurd. What up from northern Michigan!!

[@JPsBladeworks]

Ive been meaning to make a bowie for quite sometime. Maybe ill have one in the near future 🤔

[@bobbygarrett9588]

You do amazing work! Thanks for Sharing!

[@JPsBladeworks]

Thanks for watching

[@robertr4193]

Over all it is a pretty nice looking knife.

[@JPsBladeworks]

Thank you

[@patg148]

Yeah I want to buy this knife

[@JPsBladeworks]

It will be available soon

[@kzarnold3678]

Nicely done 👍

[@JPsBladeworks]

Thanks 👍

[@elios7623]

that looks so nice

[@JPsBladeworks]

Thanks

[@andresdelafuente3783]

very very good!!!

[@JPsBladeworks]

Thanks

[@bilge-hankarabacak1521]

That knife looks 🔥

[@JPsBladeworks]

Thanks

[@Jaythack]

Sick handle choice

[@JPsBladeworks]

Thanks

[@neilgillmore]

Yes show us the forge build....👍

[@JPsBladeworks]

Will do!

[@emonge9104]

Pretty cool

[@JPsBladeworks]

Thanks

[@TyrellKnifeworks]

Great video! I like how the knife turned out.

[@JPsBladeworks]

It came out nice and now i have a little tiling experience for the bigger nicer mosaic im going to try. Thanks for the help i appreciate it.

[@eduardobermudez5515]

Cool knife dude. Thanks for the video.

[@JPsBladeworks]

Thanks for watching

[@landroveraddict2457]

Would love to see s forge build. Consider sizing it so you can use sacrificial fire bricks, tiles, swap them out when the flux damages them

[@JPsBladeworks]

Thats how my brother has his. I think its the best way to go

[@erinriley4966]

Bro I absolutely love the vids. And yes please do a vid on making a forge. I'm getting into this in the near future. So anything you can make video into would be fire.

[@JPsBladeworks]

Thank you. I'll definetly do a video on the forge build. I have many yes's and no no's so far

[@wouldiwasshookspeared4087]

Kick ass, dude!

[@JPsBladeworks]

Thanks

[@JohnMoeckel]

I think it looks pretty cool. Keep it up dude

[@JPsBladeworks]

Thanks

[@Faultl3ssLyc0n]

I k ow nothing about forging..... but I know a good looking knife. Well done from the UK

[@JPsBladeworks]

Thanks from Florida

[@osirisatot19]

I think that knife came out great. I need to do another ball bearing canister, but it is so hot in my shop lately that I don't want to turn on the forge.

[@JPsBladeworks]

Yea i knownthe feel. The florida heat in a small shop is bad enough. Turn thr forge on and i have to sit by the fan to keep myself from baking.

[@osirisatot19]

@@JPsBladeworks Yeah I have one of those giant fans, but unfortunately my shop is a shipping container, so if it's 100 degrees out it's at least 120 in there.

[@JPsBladeworks]

@osirisatot19 damn thats rough. At least i have the side door of my garage to get a little breeze coming in. Fortunately, winter is around the corner, and we get a short break from the heat.

[@haydenc2742]

Do you ever cut knurls or scuff the tang to help the epoxy bond stronger? Such a great little knife! Could you do a Damascus replica w/ blood groove of the USMC K-Bar? Such an incredible knife! Keep em coming!!!!

[@JPsBladeworks]

Ive never made a kbar before so not sure. But i do scuff the tang and do small notches before i epoxy the handle in. I just dont record that part.

[@donalddparker]

Great video and cool knife yet again. Keep it up!

[@JPsBladeworks]

Thanks

[@bernardhill1622]

Nice colour combination..❗🤔👍🏻👌🏻🇿🇦

[@JPsBladeworks]

Thank you

[@patrickwhelan1392]

Beautiful !!!

[@JPsBladeworks]

Thank you!

[@MASI_forging]

It's a masterpiece 😁😁

[@JPsBladeworks]

thank you

[@JuanPerez-bu6rk]

❤ the knife

[@JPsBladeworks]

Thanks

[@Weretarantula5]

Looking forward to this!

[@JPsBladeworks]

Thanks

[@אגםכהן-ר9ו]

love your vids man keep it up

[@JPsBladeworks]

Thank you for the support

[@rn.v4629]

Ive watched over 10 video's in last few days now. All the knives look so nice. U thinking about making other things? Like axes or folding knives or anything else? Greetings from holland

[@JPsBladeworks]

Greetings. I want to make other things but it takes time as i slowly tool up for new things. I just recently upgraded my press so i hope to learn how to make hammers and axes sooner than later. I want to learn to make folding knives as well but that will take some time due to so many moving parts and time investment.

[@rn.v4629]

@@JPsBladeworks ah yeah u are right. Slowly upgrade the shop how u like it and we will see😀

[@Josef_R]

It's the big hook on the rear of the handle that messes it up, I'd grind it down to a simpler, cleaner shape.

[@JPsBladeworks]

Yea i agree but its done so its going to stay that way or my next video wont be done in time.

[@michaelritter2180]

Good job man I love your videos

[@JPsBladeworks]

Thank you

[@shipyardskates]

❤

[@ziko372]

very beautiful,probably my favorite so far. I wonder what do you do with these knives 🤔

[@JPsBladeworks]

I put them in a drawer to never see the light of day again...or until i need a new knife to play with

[@ziko372]

@@JPsBladeworks interesting 😂

[@annaleas2091]

really really nice work. truly a work of art! If i may, why do you hand -and the higher grits? Do they not make sanding belts that fine?

[@JPsBladeworks]

It's easier to control doing it by hand and gives a better finish. The higher your handsand the less the scratches are visible in the final product once you etch it, so it gives it an overall nicer view.

[@riverdreams9510]

Thumbnail looks like a steal wagyu

[@JPsBladeworks]

Lol one day ill make enough so its a piece of real wagyu.

[@bigk_games8181]

Nice etch bro

[@JPsBladeworks]

Thanks

[@MikeMiguelPimentel]

1st of all I think the knife build was awesome a few things however and again I know it’s easy for me to say since I know nothing about hand making a knife so 1). Who cares if people don’t like your voice over your annunciation is great 2). The handles and patterns on the blade are great 3). So what town in Florida do you have your shop/store 4). Do you make sheaths for your knives

[@JPsBladeworks]

1) I do the voice overs without a script so I just say what comes to mind and sometimes it's a rant but I don't take things to heart. I just do it to make fun of them. 2) thank you 3) I currently work out of my garage. 4) I do not make sheaths. I never took the time to learn.