Making a Paul Sellers Router Plane from a Kit | Paul Sellers

[@Paul.Sellers]

Thank you for all of your lovely comments! If you would like to order yourself a kit, go to: rokesmith.com/product/router-plane-kit/ You can also find out more information about this Router Plane, including the technical drawings, via: paulsellers.com/paul-sellers-router-plane/ We hope you enjoy making your very own Router Plane! - Team Paul

[@mikemiller8406]

Paul, it seems that you have changed the method for making the upstand between your original video and the one using the kit. When I made the upstand following the new video, I used the 3/4” x 1 3/4” piece from the technical drawing material page and the upstand was too small. I believe you are using thicker wood for the new method. Ban you explain the difference?

[@angryginger791]

I couldn't buy this kit fast enough. I've been looking for a router plane for weeks. Everything is either absurdly expensive, or in poor condition AND still absurdly expensive. I'm also happy to give the money to Mr. Sellers and his team for all he's taught me as a beginner woodworker. Plus, there's just something about making tools that is so satisfying.

[@PatrickMcNealPuppets-n-Things]

Agreed on all counts! I don't think I had finished watching the video when I placed the order. 🙂

[@ScottBarrett-r6o]

Hiya pal just seen ur messege u got a router kit how mutch u pay if u don't mind me asking I'm in uk r u ???

[@ericvogt5460]

I just have to say thank you Mr. Sellers and the whole Team standing with you. I bought the kit a year ago for around 50€ incl. Shipping, Vat and customs and it is outstanding. In Germany on the used tool market you have to spend around 150€ to get an equivalent from Stanley or Record. New Options are starting for around the same. This kit is outstanding from the point of quality, simplicity and the support from your site. With a bit of wood you have to bring in and a bit of time you can get a very great tool for your lifetime and beyond. Not to mention that it is really „yours“. I build it, it is my tool, the techniques used are in my knowledgebase forever. Thank you very much for making such a great thing.

[@peteward6478]

Well said. :)

[@thedevilinthecircuit1414]

I already own a few old router planes that work fine, but how could I *not* order the kit? It not only supports the best woodworking channel on KZbin--it also allows me to make useful items in my own shop, using a tool I made myself. If that's not satisfaction, I don't know what is 😀 One of the reasons this channel is so amazing is it makes quality woodworking accessible to anyone using simple tools. Unlike most every other woodworking channel, Mr. Sellers wastes no time hawking the latest gadget for that filthy sponsorship lucre. He is true to the craft itself, and he always demonstrates different tools and techniques to achieve the same result. This is crucial because not everyone has a complete set of even basic tools; ways to improvise are money-saving skills. Cheers!

[@victoryak86]

What a rare gem is Paul Sellers. Looking forward to ordering the kit and making this excellent tool. There is as much value in the basic but timeless techniques taught by Mr Sellers as is in the final tool. Both are priceless.

[@dmorton63]

Hi Paul. I ordered the router plane kit and have spent some time making it. I did find one thing that was a problem. Using your method of putting the hanger bolts in a drill chuck, I ended up stripping the threads. I bought some replacements and sat down to think about the best way to install the hanger bolts. In your kit you supplied connector nuts that use a hex wrench to tighten them down. Well, I placed one on the hanger bolts and used it to thread them into the wood. It took a little more elbow grease, but it worked and saved the project. Now, my first attempt has not come with some issues but once I have some more time, I'll give it another try and see if I can make it really shine! Thanks for the fun project and inspiration!

[@peterdobrijevic3107]

Hi Paul Just bought the kit and made the router plane. Excellent, I followed your videos and the outcome is a very very good router plane. It's my first project and I'm very proud of it. Thank you Peter

[@ronbadten5803]

Received the kit today. It took awhile because of UK mail problems. It looks good. After the first video was so impressed I went looking for 3/8" O1 steel. It was not easy to find. The 18" piece I found cost $45.00. Shortly after I got it the kit became available. I ordered the kit to make it easy. I'll use the steel to make a 3/8" mortise chisel. I'm looking forward to getting into it. Thank you, Paul for bringing the joy of woodworking into my retirement.

[@RandyAllen-e4x]

I bought a kit when they first came out. It arrived here in Canada without issue. All the parts are top notch (as would be expected from Mr. Sellers). Downloaded the plans, watched the original build videos a few times and grabbed a piece of black cherry. Mine turned out superb and I'm so happy with it. It works perfectly, just as promised. The build is not difficult at all and if you want a router plane this is the way to go. It's a pleasure to use it. Thanks Paul for putting together the kit and the support materials. Love your videos, they're so packed full of helpful tips and tricks.

[@traftonrogers8574]

Honestly, could not have asked for a better and more informative video. That doesn't touch on the fact that Paul and the team created a stop-gap to get us working with a router at minimal cost. I made this when it first came out following along with the original video and it's been a real treat. Every piece in the kit was exactly as it was said to be. Well done and thanks Paul.

[@davidcampbell2845]

Had it since it was released - finally built it over a couple of weeks - it easily outperforms my metal Stanleys and I had the pleasure of building it. Great stuff, Paul. Thanks.

[@tubeampfan]

What a coincidence! I just finished building my scratch-built Paul Seller's router plane. I used Douglas Fir for the body, red oak for the up-stand, and thin black walnut laminated on the bottom for the sole!

[@trevorhosken4506]

Again fabulous Paul. Been using mine made from watching your video for16 months now. You are right it is the best. Also my home schooled lads at Skillway who made it from scratch including the metal parts agreed, it’s the best. Thanks very very much. You are a star. Trevor

[@Uli_Krosse]

That is exactly what I have been waiting for. I was hesistant to fiddle around with all the metalwork, this is perfect! Thank you, Mr. Sellers!

[@doglovingman]

Thanks to this fresh video, despite my already having made five hand router planes out of beech (of which one was donated to a local woodworking school attempt and the latest one was built with The Kit) following the initial instructions, I have started making my sixth one from a scrap of oak. I'll be placing the order for my second metal hardware Kit tomorrow. Thank you very much indeed to you and the Team, dear Sir!

[@Gnasherism]

Paul, At the age of 30, you lit the fumes of a passion I didn’t quite fully understand was there. Since, I have built (your) [my] workbench, sawhorses, router, milk stool, radius plane and bench stool. Here I am watching a video about something I’ve already done. You’ve inspired me so much. Big love

[@traukian]

Wim Schippers, Netherlands. When I saw your first video of making your own router, the hardening of the metal was one step to far for me. Seeing this video, I bot a kit rightaway. Thank you very much for helping me getting past that metal hardening step.

[@aardiggrondig]

Ik zit er ook aan te denken, om deze set te bestellen. Maar hoeveel komt er uiteindelijk nog bij aan douanekosten en invoerrechten?

[@peterdobrijevic3107]

Thanks Paul for making the time to make this excellent video. As soon as there kits available, I will definitely have a go at making this. Peter (from Worksop)

[@jeanlucvassort6411]

Bonjour et merci Paul, i am impatient to receive your kit and manufacture it. Since years i follow your teaching with so much pleasure. All i know about wood working is mostly from you dear Paul. My small and amateur woodwork shop is a so relaxing and enjoying place where i love to be and create. Regards to you and thanks. Watching & hearing you again this morning is a delight. Kit received router plane in construction ... some weeks later (like everybody other things keeps me busy) , the router is quite finished, was a great pleasure to handwork this plane, your video / comments / advises have been extremely useful. Thanks Paul & Co ... some time later ... router plane finished , blade nicely sharpened & plane tested : very fine. Elegant, efficient and thoughts to Paul for life time ...

[@ForestWoodworks]

I've got the page and cart bookmarked at the ready once I've saved up my allowance. ❤it, Thanks Team Paul and Paul 😇

[@markluke8447]

Thank you so much Paul for sharing your years of experience with us. I’m new to woodworking and your excellent teaching techniques and insight to woodworking are invaluable for us who desire to learn and don’t have the opportunity to work in an apprenticeship program. I purchased your kit and will use this video to put it together.

[@christopherharrison6724]

Absolutely stunning watched the original made my own version from that ,but still found myself unable to turn off from watching this.Thank you so much for enriching your viewers lives with your insitefull teachings

[@ianhand68]

Thanks so much Paul! I got my kit last year, made the router mostly from Sapele. I don’t use it often but when I do it always put a smile on my face 😊 🙏🏻

[@colinmclean2523]

I completed the router plane using the kit of steel parts and watching your video. Got into a slight tangle with a pdf that had the upstand 19mm high. That didn’t work but v2 was fine. And it works - perfect on mortices for hinges on a box. Excellent, and satisfying to make.

[@runningwithscissors0911]

Thank you Paul, for accommodating those of us who do not have (cannot afford) high-end toosls (e.g., a drill press) but love wood working and do the best with what we have ~ showing "how to" wiothout a drill press really helps! Can't wailt to build my kit.

[@glencrandall7051]

I watched your video the first time several months ago. Not sure exactly when but it must have been about the time it was released. today I watched it again and I just ordered the kit and downloaded the plans. I have a router plane but just want to build this one because it looks so great. Also your instruction is so detailed I think I cannot go wrong with the build. As you said in the video it looks like furniture. I don't do a lot of hand work but I find that a router plane is great for cleaning up machine cut dados and lap joints. Thank you for sharing. Have a great day and stay safe. 🙂🙂

[@JesusvonNazaret]

Such a great plane design, best thing is the easy to sharpen blade

[@SomethingsHear]

Finally made one from the kit. The adjustability feels pretty nice., and the lenght of the screws and bracket let´s you switch easily to the second notch in the blade. The angles for the screws and the triangled piece of wood are tricky to make. Did not use glue to attach the triangled wood. Two screws through the bottom gave me room for errors and recutting. I used a bandsaw for the groove of the blade. The blade is a nice chunk of steel. Looks great when it is all together and works as well. Nice kit, i´m happy.

[@williamhanna5224]

Ordered the kit downloaded the pdf. Thank you Paul you are a true artist and master craftsman!

[@rauschguitars]

The most asked "What's that tool?" comment on my videos is about my router plane. It's great to have an affordable option to present to people! It would be great to have a narrower, 1/4 inch blade option as well, that's what we use for truss rods in guitar necks.

[@thedevilinthecircuit1414]

Harbor Freight sells quality tool steel stock CHEAP. Get a 1/4" stick and this router plane kit, and substitute the smaller iron. Easy peasy!

[@FirstMM]

Just finished making mine (cherry base, walnut upstand); works great. Did a couple of practice runs on the cutter mortice before going for it on the walnut. I'll probably build a 2nd, but this time I might measure *really* carefully and drill press the holes on the upstand whilst it is still square!

[@mattevans-koch9353]

Thank you Paul for this video. I made my router with your kit from walnut. There are some mistakes in the first build so I will be making a new body following this video closely and fitting the kit to that. It is a wonderful tool and very enjoyable to make.

[@danielh12345]

I had the link to purchase the kit open just 5 minutes ago, just ordered my first set of chisels and the like this week. So excited to get started! Will have much to learn and many skills to develop but I'm eager to do so!

[@xaviermartin9105]

Hi, I'm in total admiration about your job. I follow you on your youtube channel from france and I decided today to buy your product to make my own router plane. I falled in love with wood job and in peculiar because of you and the pleasure you give through your realisation. I hope that your will understand my comment because my en glish is not really good 🙂. Thanks a lot for all

[@michaelmiller5387]

Thanks Paul. I loved this video the first time around but the only thing that put me off was the scrabbling around looking for and finding the right kit to do the job, knowing that purchasing the wrong parts was a possibility and expensive exercise. Just ordered the kit today and have had the Cherry stored since the first production.

[@laxm8162]

I just completed building my router plane from the kit today and am absolutely happy how it came up! Thank you so much paul! A did make a few mistakes but hopefully I can learn from it if I have to build one again - it took me 2 attempts to make the groove because it didn't come out as accurately as I would have liked in first attempt. It would be nice to use a small router plane to get that groove accurate but I didn't have one. Secondly, I didn't use the pins to secure the upstand like paul does here. I read that using a bit of salt helps the same way but it made it worse for me(maybe because the salt was too coarse in my case). If I do it again, I will just use pins like paul suggests. After the build was complete I was feeling something get stuck while backing out the iron. I thought I had to file the upstand groove but I realized later that the sharp corner of the blade iron was biting into the thumb screws. So, after I filed the edges of the iron(in the grooves within the iron) it worked fine for me. Finally one question - Is there any particular reason you don't put shellac on the bottom sole?

[@martintheron1386]

Eventually it will rub off,because of friction,I assume

[@laxm8162]

​@@martintheron1386I guess that may be the reason. Thanks!

[@LinauLee]

Paul, when you said "I made this for you: I was over the moon, thank you so much! I don't mind if some other folks want one too. hUga from Ohio, Lee

[@martintheron1386]

Paul,whenever cutting steel threads shorter,turn same size nut on prior to sawing - now,when you unscrew the nut completely as it comes off it removes the burr.Thereafter file a chamfer

[@heinrich-peterhimmelbauer1418]

Today my kit arrived. Now I am looking for a reasonable piece of wood. A shame, GB is not in the EU any more, the additional costs are for nothing. But I knew it and I am looking forward, I love this hand routers.

[@mykidsdad9]

It just arrived!!!!!!!!! Awesome looking quality. I’ll give it a go!!

[@apinakapinastorba]

Oh man oh man, placed an order! I have liked to try to make this router, and now it's the perfect opportunity :)

[@Musicpins]

I made mine about 6 months ago, sole in oak and I think the triangle piece for the iron is ash (I would use a harder wood for this if I were to do it again) all though I have only used it a couple of times, it has been my go to tool for precise shoulders, or whatever cut ins I have to do for hinges and what not. Its a great tool! I wanted to thank Poul and team for putting this out there at an affordable price.

[@james9789]

Nicely presented and Sheffield steel very good! will make a wonderful tool,I need to evaluate whether I need one or not as not sure if I need a plough plane might be better for my application,just bought a 151 spokeshave on Pauls recommendations thanks for all your generous help and best on the net woodworking videos.

[@reaper060670]

That's a beauty Paul. I'm only getting to grips with my hand planes now. I began using them about 3 week ago and I have to say it gives me a really nice feeling to use them to square up boards or do my best to learn the practice of doing so. I'm taking my time right now but I have been using my hand planes more than any other tool in my wee shop now. I tend to use my hand saw for small cross cuts to try and learn the correct techniques more and more and I have to say I'm about to have a go at building my own small router plane. I have some nice lumber in my shop. It has a pinkish hue to it but I'm not sure if it is Mahogany or not. I'm going to have a go at making my own router plane and see how it goes. If I cannot get it right and working the way I want then I will buy the kit. I want to have a go at making my own beforehand though Paul. I really enjoy ur videos Paul BCOS THEY'RE ALWAYS VERY INFORMATIVE.

[@mdhebert]

Reminds me of the fun I had making the first one. I'll have to order another kit and make one that's a little smaller. :)

[@jayneal8293]

You've done an amazing job! Again!! Will be ordering one

[@RockHardWoodDaddy]

Such an outstanding piece of work, holy guacamole!

[@apinakapinastorba]

Finished the router this week, it's pretty and functional and feel good to use. Made it out of rowan.

[@Louis2282]

What a brilliant idea ! You just get better and better ! Please carry on 👍

[@jimhyslop]

With all the metric/imperial subtitles popping up, when Mr. Sellers said "tomato tin" at about 33:10, I expected a pop-up saying "to-mah-to = to-may-to" 🤣🤣

[@jamesrogers4761]

Fab. Order on its way! One of the many reasons I love your content is that there isn't a festool item or any bloomn black walnut in sight.

[@dfailsthemost]

Awesome. Very generous with your knowledge.

[@williamhanna5224]

Amazing tool you have produced !

[@dwinsemius]

Wow. I saw an earlier router plane build by Paul that didn't have the advanced features. This looks pretty slick.

[@markpoulson7902]

Thank you for the idea to reverse the depth adjustment nut. You save a cutter that I made too short.

[@OneWheelDrive365]

Amazing! I have all the tools and machines to work with metal. But i will buy this kit. It saves me so much time. This will make it a fun project. With or without, you have experience in wood or metal working.

[@mohammadlateeftuma1652]

You still the best as allways Mr. Paul

[@Jim5150jvc]

Another incredible job, Paul!

[@chriscollins9717]

Finally got round to building this as I needed it for a project. With my limited skills I want expecting it to come out very well but I surprised myself and it came out perfect 😃 I didn't add the handles (see Wood by Wright KZbin) and it works lovely. Thank you

[@TheMopangbend]

Just ordered my 2nd one, gonna do a father son build with my adult son, and some Birdseye and walnut.

[@christelmuller9198]

Hallo Paul , sehr gute Arbeit man kann immer wieder lernen , danke . Sehr schönes Video. Viele Grüße Christel aus Magdeburg ☺👍

[@michaelmarchione3408]

That is so cool!!! Enjoyed, take care!

[@perlygatekeeper]

You right sneaky woodworker you! You changed some things from your first video! I think your new methods are better! I sourced all the materials to make a plane, but the steel was already hardened. Local machine shop said it would have to use EDM and estimated $100 US to make one blade! I then decided to purchase your kit Paul. Then, being the stubborn git that I am, I used diamond wheels of various sizes, a dremel and a cordless drill and a lot of water to form my blade. It's pretty good, but only has one slot, not two. Then your kit arrived. So I will be building two planes! I'll let you know how they come out.

[@briantaylor9266]

Thanks for this. Ordered! Shipping cost is very reasonable.

[@Boankofa]

Bin noch am Überlegen. Danke für die preisliche Info.

[@NaserHekmat]

Thank you. I got my package. Hi from Newmarket ON Canada.

[@arnoldkok4859]

Finally built it :)

[@manfredhauptreif7285]

I bought your set for the router plane. I guess I will love it, but what a pity, I saw you using your raginacanoiler and I miss it in the set😢. Okay I‘m just kidding. It is great that you repeat the building of that router plane. It reminds me to start building it myself. To be honest I still look for the right piece of world. I bought a whole bunch of firewood and it is beechwood. Hundreds of logs I could not decide which one of it will be ennobeld to be a Paul Sellers router plane. Thank you for your great work, not only for that router plane but for all the effort you put in to give us (and especially me) the chance to build this nice little tool. Greetings from Germany!

[@Lauradicus]

😂

[@jasonzvokel6317]

Great video! I already have my kit... just looking for the time now😃

[@TermiteUSA]

I love my kit. Thankyou Paul.

[@luciano-7lagoas-mg351]

Fantastic Paul!

[@hassanal-mosawi4235]

Thanks for sharing that!

[@corystewart6190]

What a well put together kit. I have some pacific dogwood. Would that be a good wood to use for the base/upstand?

[@jamesdavis5527]

I have collected all the parts I need to make this but I having terrible time finding the wooden knobs the size you recommend ; most that I find here in the US are only an inch /24mm long where you have use longer ones where dies one find them that long???

[@davidcampbell2845]

Brilliant.

[@bobbyb1607]

Thank you I appreciate your teaching style. You explain everything in detail both how and why as you're doing it. Ordered a kit and will be making one soon. A couple of questions. What is the size of the router plane in the video based on? Most of the router planes I've seen have handles installed 90 degrees to the base. Lee Valley has theirs installed at about a 45-degree angle. Is there any advantage to one or the other of the handle angles? Having never used one I honestly don't know.

[@snort455]

I made mine. Works great. The kit would have saved a lot of messing around and not cost any more.

[@JamesGriffinT]

I just finished mine yesterday, a really fun project. Now back to the bench, four of eight mortises cut, four to go. *shudder*

[@20100Everaert]

Hello ! I’m supposed to receive my kit in a few days. I can’t wait to get started !!! I have a beautiful piece of walnut waiting 🤩 Kind regards Vince

[@andykg73]

just bought the kit, cant wait to start this project. Now to decide on the wood to use?

[@bobbabcock3847]

Great vid

[@laxm8162]

Hello Paul. Thank you so much for posting such wonderful content and keeping this wonderful art alive. I just placed an order for this kit even though I already have a Veritas router plane. I want to experience the joy of building my own and learning and enjoying the process. I have one question - I am always nervous when I have to drill something perpendicular - I mess things up more often. I also want to use the vintage brace and bit that own. So, any tips on how I could drill this perpendicular and preferably using the brace and bit? Is it advisable to drill a narrower pilot hole first even when using the brace and bit? If yes, I would still be okay to use my power drill to drill the pilot hole but would like to switch to my brace and bit eventually - and yes, I don't have a drill press. In fact I don't yet have any larger diameter bits for my power drill! (but may buy those if my brace and bit doesn't suffice for this task). Thanks in advance and I again want to emphasize that I love watching your videos - it has taught me a great deal in hand tool woodworking and I am thoroughly enjoying every aspect of it 🙂

[@rendabullock3503]

Greetings, Paul! Say, how did you make your shellac brush? I'm very interested! Thanks

[@andrewbrimmer1797]

Fantastic

[@DavidPerez-ck3dw]

A machine did make the corners - Paul!

[@davidrustylouis6818]

Does the included blade come hardened? Or is it up to the receiver of the kit to harden & temper the router blade?

[@williamhanna5224]

Awesome video Great work and the kit i will purchase

[@ATurtle05]

I love the fact that Paul has all the tool storage and racks, but like the rest of us, puts tools he's used on the bench then loses them!

[@jonathonandketurah]

Is there a list of the most simple tools needed to start woodworking? I have some chisels and would like to make this kit, but I’d prefer not to buy anything that later I might realize I didn’t need… I’m looking here for help because it seems the most reliable and “slow” which is what I’m aiming for. Thank you for any help getting started.

[@myerscok]

Thanks Paul. An excellent video with so much detail. I’ve got the kit and the wood. I just need the garage to warm up a bit now to get it made. Do you wax the sole of the router?

[@martintheron1386]

No,Paul said he leaves it untreated - no wax

[@peteward6478]

Thankyou.

[@berkleykeen1164]

I have a question regarding the standup piece; the plans show size of 5 1/2 X 1 3/4 X 3/4; on the kit the thickness appears to be larger than 3/4

[@aKAP7681]

Great job. Can I ask a question? Could you tell me the optimal dimensions for most of the work, from your point of view, if I make a thing of a similar design from my own materials and components.

[@danielh12345]

I'd suggest checking his previous video on making this router plane and the article on his website (just Google his name)

[@aKAP7681]

@@danielh12345 OK, thank you.

[@gord4067]

Love this. Any idea when the kit will be back in stock?

[@HarmonicaTool]

Reading this 3 months later, it is out of stock and apparently nowhere mentioned, if on back order or not.

[@GCaF]

In the last few videos Paul has been using the plywood workbench (and only this one). Is this for convenience (it's the one set up for filming so that's best) - or is it actually the "best" (durable/reliable) workbench out of the bunch? I am trying to decide which of Paul's workbenches to build for my own :)

[@scotthewes2431]

Can anyone tell me where to find the wood knobs Paul uses in this video? I have been to a hundred sources and can only fond knobs about 1 1/4 inch tall. The ones Paul is using are about two inches, almost like a front knob on a plane. Please where can I find them. Thanks.

[@davidrustylouis6818]

I assume the cutting iron comes already hardened & tempered. Am I correct? Thank you, Paul & team at WWMC for this & all you guys do to help us woodworkers around the world.

[@sigogglin]

It does come hardened and tempered

[@davidrustylouis6818]

@@sigogglin awesome, thank you.

[@laxm8162]

Dang! I enjoy so much watching and following your videos...again and again!....Is there a way I can put 20 likes at onece?!😊

[@the_attic_woodworker]

Bought two of them, on the first I went to school and soon I'll make a beech one

[@nicloewenhagen5557]

How did you get two? The website won't let me add two to my cart I can't even buy one keeps telling me to try again later

[@the_attic_woodworker]

@@nicloewenhagen5557 with two separate orders at the beginning. To be entirely honest I didn't think the first order was received and I placed a second one some days later

[@stephenclingerman4865]

I watch you a lot. I love the things you make and how to make them. I used cherry and amber shellac for making a tote and knob for my father’s Stanley No. 10 using your videos. Is this amber shellac on this router plane or clear shellac? Either way I really love the look of shellac.