Making a Spring Swage

[@alanpreston3111]

Absolute genius, blacksmith in a clean workshop ... brilliant 👏🏻👏🏻👏🏻

[@praveenparbhakar5498]

Very expert and having well equipped blacksmith tools which are usually not available with all. Excellent

[@keithscrafts]

Wow, that turned out awesome. Just getting into blacksmithing and videos like this are brilliant.

[@markspc1]

Very good work. No annoying music, clean workshop and the video was straight to the point. Love it.

[@andrejohnson6731]

This man’s craft appeals to both my love of aesthetics and my obsession with cleanliness (read OCD).

[@rerawho]

Yeah, my living Is rarely as clean and orderly as this shop.

[@Muttlydog45]

Wow..... To have a workshop like that would be a dream come true..... Self explanatory work without any annoying music or verbal diarrhea...... Thanks for sharing ......

[@Aleph-Noll]

yeah the big open space is nice

[@kg2155]

Cleanliness is the key for safety. Love your works.

[@jawediqbal9475]

Your video makes my mood happier , I was very sad .

[@michaelclark2840]

Cleanest smithy I've ever seen.

[@kevind7617]

Got recommended a video from you and have been binge watching my whole day off away.. your work is so clean.. I subscribed

[@rigoniironworks]

well thanks! glad you like em

[@juanjosehernandez6625]

Congratulations, your workshop is very clean.

[@sumitvishwakarma1213]

Your workshop very neat and clean

[@victorhex6380]

I have worked in many iron working shops and never seen one this clean. Very professional work.

[@mada0zani]

The way you work and your workshop really get me to think that place is a theater

[@ronyoung7917]

Beautiful video, thank you. So impressed by the skills, and the machinery.

[@victoralmasan6309]

I WISH TO HAVE ONE SHOP LIKE THIS.WONDERFUL SHOP MAN.THANK FOR LOADING T-VIDEO

[@Brackinforgeandhomestead]

It completely went over my head when you walked up to my booth on Saturday. You looked familiar but I could put my finger on it! Ha, wel I’m actually a big fan of yours it was a very busy day. We should figure a time to forge together sometime, your work is amazing! Wish I would have connected the dots. Great to officially meet you.

[@rigoniironworks]

No worries, nice to meet ya. My plan is some workshops in the near future

[@sirpfa]

Thats how a workshop should be like, just wash inside of the bucket from time to time😉

[@mubasharqadeerSAP]

Beautifully done

[@MattMatt-fy4vv]

Awesome workshop..

[@joseeduardohasman1739]

Good job. Congratulations 🔝🔝👏👏👏

[@heardashot]

Great work. I enjoyed that.

[@streetDAOC]

Very clean workshop and the video was straight to the point. Love it. Subbed.

[@rigoniironworks]

Thanks!

[@salimpathan2452]

PowerfulVeganHands wsgxz

[@kaseymathew1893]

I had to see the final product being used before I understood what it was. "Oooh, it's a make-things-round thing!"

[@d.somesh1380]

Simply very good making...

[@popgrubbs]

Another great project.

[@Rustem09MM]

Очень красиво и аккуратно. А кузница как операционная! Уважение людям труда!

[@АлексейАлексеев-е8ф9т]

объемов нет, вот и чистая. Посмотрел бы я на нее если бы он там работал с 8 до 20, хотя бы недельку. Сразу видно, что кузница хоббийная, а не рабочая.А так да- завидую) Хотел бы я так научится, да у нас на Руси проблемы с кузнецами.

[@moh5463]

Hats man, you are amazing.

[@redlionforge9173]

I’m going to like this channel.

[@vitalysemin9980]

Приятно посмотреть, чистота и порядок в кузни, да и за работай мастера наблюдать одно удовольствие.

[@TheApalachian]

Smooth and exact, Ireally enjoy your work.

[@johnalleman2918]

Great to see more videos- inspiring work!

[@bravalb]

Be quiet idiot

[@JohnJohnson-bg2oo]

Master craftsman!

[@mray1255]

Nice work.

[@jaswantsingh-km4hh]

Very hard work so very good

[@ПОЛНАЯХРЕНЬ-т7и]

Please show more details about the burner in the furnace.

[@franciscohernandez4766]

Es el primer taller ordenado y limpio para ser un espacio de herrero forjador.

[@vincentrosa9631]

Great job 👍

[@johnwilliamsgutierrez9291]

Que.taller.tan.limpio.y.organizado.me.encanta.

[@СергейЛазников]

Браво!!!Кузнецы и в 21 веке нужны.Браво.Прфессиональный подход.

[@6969smurfy]

FYI. With a slight modification in shape of your die you will not have to knock the corners off separately. It’s nice to get it all in one going.

[@rvb01]

what modification, dan?

[@6969smurfy]

Wow, been so long ago, I had to rewatch video. If you make this die from a forged in round stock, instead for drilling it. Start with a slightly larger round. Then hammer pieces to the proper ID your going for. This will give you more of an eye 👁 shape. Plus put a much bigger entry bevel on the entrance ends, you can take square stock straight into round in one go, you'll get a very round very smooth textured round bar out. If you need a very clean transition between round and square you make a monkey tool if you don't have the proper forming anvil.. Peace out!

[@joshdrexler8773]

Beautiful. Who needs round stock?

[@kutazamanchi]

Nicely done!

[@sandeshkhilare893]

Good job 👍🏼

[@pharaon6718]

Can you show us how to make leaf spring ?!

[@rerawho]

What alloy steel did you use for the business end of the swage? I have never used a case hardening compound but can’t imagine getting an acceptable hardness with mild steel. But, since I’m completely ignorant of the practice, I’m probably wrong. I’ve been smithing for 35 years and have been successful with heat treating for quite some time but never used the case hardening process.

[@rigoniironworks]

Mild was what I had at the time. Case hardening works well enough so long as the contact areas aren't sharp, then I'd use h13. 4140 is usually what I use for dies.

[@rerawho]

I will try it. I had a look at the brand you used in your video. I’ll order it and give it a shot. Thank you for the info.

[@williamcunha9136]

Awesome Job! What can steel is the blocks make from? Thank You

[@rigoniironworks]

These are case hardened mild steel. Should be fine for forging mild, but if you're forging tool steels, I would make them from something tougher.

[@abdel-hadikaddour8400]

Bravo, chapeau

[@Theoldindie]

That blackish powder you use like flux... Is it a case hardening compound? Thank You for the videos, you have 1 more subscriber! Not that you lack those :)

[@SouthdownWatersForge]

So clean. Inspiring

[@MilanDupal]

Well done. Like your nice and clean shop.

[@KitoMarchetaria]

👍🏻 Very cool !!!

[@webwillie1]

quite the shop.

[@edersales67]

So crazy, very top

[@Mercenary_32]

Definitely subscribe! Great video!👍

[@mialouraymond3809]

soudure a l arc sur un marbre de travail bof bof

[@dansmolen1618]

Real nice shop!!

[@salomao1971]

Grandiosamente funcional.

[@gbe46]

Bardzo czysta kuźnia, piękna robota.

[@AlexDiaz-it7kg]

Estimado señor deseo saber en que país esta usted ? Y si contesta algunas dudas gracias

[@sylvainflandre2906]

Le savoir faire bravo 👍🏻👍🏻👍🏻🇷🇺🇫🇷🇷🇺🇫🇷

[@OuroborosArmory]

How do you like the cherry red? Do you see a noticeable difference in hardness?

[@hadighaemipoor6354]

I love it

[@desertTooHot]

Spicy hotdog maker

[@waldineypaiva6149]

one subscribe from Brazil!

[@patkcorcoran]

Safety glasses protecting the hairline, I gotta say, I see it a lot, lol. 0:08

[@oscarbritos8033]

Increíble!!!!!! 👏👏👏👏👏👏👏

[@rvb01]

Hey, John. What stock are you using for that? 2" x 2" x 3/4"?

[@rigoniironworks]

For this one I used: 7/8"x2.5"x2.5"

[@rvb01]

@@rigoniironworks thanks! I'm working on some swages.

[@en136]

Einfach und gut.

[@МаксимПолишко-к9э]

Очень чистая и аккуратная мастерская

[@4dirt2racer0]

is it jus me of does a metal shop thats cleaner n whiter than a church jus seem wrong?? iv got too much i wanna do to clean up every spec after every job

[@bhanwarbaria6532]

Why are you not coming forge in fire show

[@rigoniironworks]

I was asked and flattered, but not my thing. For me, the priority is excellent work and less theatrics.

[@abderrahimhaloumi4952]

Think you for support

[@AnanasStudio]

awesome!

[@meher9608]

What is the powder you used before heating the blocks.?

[@mohammedebrahimloft9484]

Is this oven treatment

[@WalterEKurtz-kp2jf]

I just want know what a spring swage is Update: now I know.

[@wernerbendel1589]

Ö ö mö mö

[@WalterEKurtz-kp2jf]

@@wernerbendel1589 exactly

[@xxxavier63]

same reason I opened the video...

[@verixcvoin1432]

@@wernerbendel1589 wow. I agree with your statement. I too, have terminator 1 hands after handwashing from coronavirus fears.

[@jukeboxhero1649]

Terminate the Colonel's command.....with extreme prejudice.

[@basharalngar1567]

1.33What's in the pack?

[@stevetommasi4029]

Fantastico ...

[@timothygee8566]

Can't be real. . Shop is too clean. . Haha. . . Cherry red?. . Why?

[@НастяШивырталова-щ5ж]

Джейсон Стэтхем в фильме Как закалялась сталь.

[@shivashiva5377]

Amazing super

[@amirul9213]

Sir, what name this powder?

[@rigoniironworks]

cherry red. A case hardening compound.

[@АнатолийКрывша]

Молодцы труженики.

[@CUBETechie]

So you can make it with different sizes?

[@nikitashkliar240]

What is a cherry red?

[@rigoniironworks]

case hardening compound

[@tabletom5583]

¿What is "CHERRY RED"? Thanks!!

[@smallville7836]

Que es el polvo que utilizaste???.. saludos desde México 🇲🇽.. 👈 ✔️ 👍 👍 👍

[@dougp4614]

Is the handle material 1.5” by 1/4” mild steel (A36)?

[@rigoniironworks]

You could use that. I used 1.25 wide stock.

[@dougp4614]

Thanks for the reply. I’m starting to build tooling for my power hammer.

[@atelier_nilsson]

Nice!

[@SivaKumar-bx3fn]

Welcome to your performance in making spring swage. By simple method.Thank you.

[@fnafplayer6447]

What does it do?

[@АлександрКулагин-э1ф]

Заготовка для расточного резца.

[@Blou55]

Nice... What is the cherry red stuff used for?

[@rigoniironworks]

Hello, it is a case hardening compound. Think of it like putting on a hard M&M candy shell on the steel.

[@vadim100yan]

👍👍👍

[@aleksandrpasichnyi2888]

А где творческий беспорядок?

[@fredericdeschamps6036]

Tout ça pour ça!!

[@bigmacca99]

How did you figure out how much material you needed for that hoop?

[@rigoniironworks]

Use a tape measure, wrap around cylinder size you want, just make sure to leave a gap that is the distance of the dies. All the best

[@alan_a_1975]

сварка ударов боится, сварные швы надо делать как можно дальше от точки удара, эти отпадут через неделю

[@Андрей-т6в8в]

У нас в больницах грязней чем у него в мастерской.

[@SsergeySav]

@@alan_a_1975 так у нас в больницах не всегда лечат, а срач такой что помимо лечения ещё пару десятков дел делают

[@perseoeridano4182]

👏🏻👏🏻👏🏻