Making a Super Knife With Simple Tools

Hello everyone, in this video I show you how I made a super knife with simple tools that anyone has at home, just with a grinder and files I made this beautiful knife. Blade is spring steel and white nylon handle. Watch the video and check how it turned out, leave your like and comment, promote the video to help leverage the channel. Thanks
In this channel you will find videos dedicated to the manufacture of: knife, miniatures, tools, machines, among others.
Help my brother in this live twitch sign up there: / 4zvdo
MY INSTAGRAN: / maker_ha
============================
DON'T CLICK HERE: bit.ly/39dYnt2​
NÃO CLIQUE AQUI: bit.ly/39dYnt2

[@johnedgar7956]

Very nice!!!

[@MakerHA]

Thanks my friend John 👍👍👍

[@ricardocipo248]

Essa ficou linda🙏🙏🙏🥰👏👏👏👏

[@MakerHA]

Muito obrigado meu amigo 👍👍👍

[@user-mr1it1jz1j]

Мне очень понравился эта форма ножа и вообще этот нож.

[@MakerHA]

Спасибо, мой друг 👍👍👍

[@WolundrForge]

Amazing

[@MakerHA]

Thanks my friend 👍👍👍

[@efrenpadua797]

Maraming nasasayang na bakal dito sa amin pagtityaan yan bagahin at pupukpukin ng pupukpukin hanggang sa mahulma walang nasasayang na bakal.

[@MakerHA]

Oo, depende ito sa mga kondisyon sa panahon ng paggawa. 👍👍👍

[@amitbhattachariya9357]

Very high standard of craftsmanship.

[@MakerHA]

Thanks man 👍👍👍

[@darrengriffiths2372]

Hi sir wowwow that a knife my friend i lv it👍🙏👍this stile of nife i like and lv mazing work my friend godbless dino uk be safe👍👍👏

[@MakerHA]

Thank you so much my friend 👍👍👍

[@nevillesaunders1916]

That is one solid knife. Well made, thanks for the video.

[@MakerHA]

Thank you very much my friend 👍👍👍

[@markusfuhr4501]

Das nenn ich jetzt mal ein gescheites Küchenmesser. Top Arbeit

[@MakerHA]

Danke mein Freund 👍👍👍

[@ryanmcgrath339]

Nice work there. I like the way you left the black colour then added the white handel scale it really made the knife pop. Thanks for the upload

[@MakerHA]

Thank you my friend. Yes, this light with dark highlight on the blade 👍👍👍

[@bibahan]

Very well done with limited tools. Looks awesome.

[@MakerHA]

Thank you so much 👍👍👍

[@nizam3731]

Dünyada en güzel bıçakları Ruslar yapmakta izlemeni tavsiye ederim Rus videolarını

[@MakerHA]

Evet onları da izliyorum. Onlar çok iyiler 👍👍👍

[@vincentjoseph5726]

That's super stunning... good.. for Deep jungle and Western wear.. dose it spares sparkle fires for your Campos

[@MakerHA]

Thank you so much my friend Vincent 👍👍👍

[@RedBeardOps]

Great looking work!

[@MakerHA]

Thank you my firend 👍👍👍

[@jlf2393]

I AM PLANNING TO MAKE A KNIFE AND THATS THE SAME WAY I AM GOING TO MAKE IT THE EXACT WAY YOU ARE DOING IT. I AM SO HAPPY I WATCHED YOUR VIDEO.YOUR WAY AND THE WAY I PLANNED IS SO EASY AND IN THE END THE QUALITY IS THE SAME AS ANY HIGH QUALITY KNIFE.

[@MakerHA]

Yes, I try to show in my videos that you don't need much to make a good quality knife. I don't have conditions to acquire the best tools and machines, so I always do it in a way that makes it easier. 👍👍👍

[@guillermoalfaro2714]

Ohhh yeah!!..man nice work 👍 I love this one

[@MakerHA]

Thanks my friend 👍👍👍

[@ridvanurek120]

😊TÜRKİYE . 👏👏👏 Elinize sağlık. Mükemmel oldu. BRAVO TEBRİKLER ☕🍰👍

[@MakerHA]

Teşekkür ederim arkadaşım. Büyük bir sarılma sizin ve Türkiye'deki herkes için 👍👍👍

[@cesarburgos1274]

Espectacular cuchillo, muy muy bueno quedo!!!!!....gracias por el video

[@MakerHA]

Muchas gracias mi amigo 👍👍👍

[@ssunfish]

I like a Super Knife and wanted to see you make one. Thanks for the video!

[@MakerHA]

Thank you so much my friend 👍👍👍

[@MASI_forging]

So much variety. Another gorgeous video.👍

[@MakerHA]

Thank you very much my friend 👍👍👍

[@marciomendonca7854]

Top

[@MakerHA]

👍👍👍

[@orazioscardace911]

😊

[@MakerHA]

👍👍👍

[@youyoyouyo1407]

como siempre excelente tu trabajo

[@MakerHA]

Muchas gracias mi amigo 👍👍👍

[@habelazevedo4063]

beautiful knife

[@MakerHA]

Thanks my brother 👍👍👍

[@jimhamlin8671]

A great build.. keep up great work

[@MakerHA]

Thank you so much Jim 👍👍👍

[@larrykoroush6995]

Very nice design. Great job

[@MakerHA]

Thanks my friend Larry 👍👍👍

[@KiKoo22]

No words needed buddy, i love your job ♥♥

[@MakerHA]

Thank you so much my friend 👍👍👍

[@izmaker8896]

Spring car..sharp for knife making.

[@MakerHA]

Yes it's very good 👍👍👍

[@terrillschneider3778]

Wonderful work

[@MakerHA]

Thanks my friend 👍👍👍

[@m.z8495]

OMG, faca muito linda, meu parabéns 🇧🇷🇧🇷

[@MakerHA]

Muito obrigado meu amigo 👍👍👍

[@leatherface711]

your fit and finish are getting much better my friend

[@MakerHA]

Thank you very much my great friend 👍👍👍

[@vladimirkovacevic1656]

awesome knife and polish

[@MakerHA]

Thanks my friend 👍👍👍

[@brunogoehner3078]

Wunderschönes Messer!! 👍👍

[@MakerHA]

Danke mein Freund 👍👍👍

[@santosmelendrez5048]

Buenísimo trabajo amigo saludos

[@MakerHA]

Muchas gracias mi amigo 👍👍👍

[@mitchmurrell753]

A well done zombie chopper¡

[@MakerHA]

Thanks man 👍👍👍

[@user-ob6mo9uf7s]

와 컬 정말 이쁘네요 맘에 들어요 최고입니다 ㅎㅎ

[@MakerHA]

정말 고마워요 내 친구 👍👍👍

[@geraldonazarenoramos5163]

Muito top.

[@MakerHA]

Muito obrigado meu amigo 👍👍👍

[@user-ko5hq3yp1r]

1000$Слово Божье живо и действенно!и острее всякого ножа!.......!Евр.4:12

[@MakerHA]

👍👍👍

[@DaemonsBane]

I cried when I saw those plastic scales get peened in place

[@MakerHA]

👍👍👍

[@paulatudor691]

He could change them to whatever a customer wanted.

[@DaemonsBane]

@@paulatudor691 probably, yeah

[@shiddiq255LMP]

Nice work brother

[@MakerHA]

Thanks my friend 👍👍👍

[@hariini8026]

Simple in my opinion is, no need hardening process like i use to make knife from hss dm05 cobalt. They don't need to go through hardening process. Sorry if my english was bad 😀🙏🙏🙏

[@MakerHA]

👍👍👍

[@ssunfish]

I have a non-steel knife blade material that is Cobalt alloy. It doesn't need hardening. It's bought from Terrain360 called Terrivantium. I didn't start anything with it yet.

[@donavantew8278]

Any chance you could make one I could purchase. Your talented my friend. Outstanding

[@MakerHA]

Thank you my friend. I'm glad to know that you like my work 👍👍👍

[@workshopredraven]

Great job, buddy! A beautiful, predatory knife turned out. What kind of material did you use for the handle? Looks like a corporal.

[@MakerHA]

Thank you so much my friend. I'm used nylon white 👍👍👍

[@fixedrider5912]

Another fine build! Your patience and skills are impressive. Thank you

[@MakerHA]

Thanks my friend 👍👍👍

[@kyrban2090]

👍👍👍

[@MakerHA]

👍👍👍

[@miltonlewis7230]

I want one

[@MakerHA]

If you want to buy, contact me on instagram or facebook. 👍👍👍

[@eapmotivacional]

Quantos dias demora pra fazer uma faca dessa ai

[@MakerHA]

Depende das condições, mas eu levei cerca de 4 dias pra faze-la 👍👍👍

[@gelanghaarteweile3048]

A real thicc boi! ;D Nice work! Nearly perfect! ;) Would be perfect if you put a saw in the back of the knife like on the "Tracker Knife" from Tom Brown.

[@MakerHA]

Thank you my friend. Yes, if it had a saw, this knife would be another level 👍👍👍

[@seamac7564]

Do you check the leaf spring for cracks and micro-defects before working it?

[@MakerHA]

Yes it has to be hurt. However, some springs already come with the famous frog skin. what would be this porosity in the plate, that is, the steel was overheated and tends to lose carbon. However, I always use heat treatment first. When the cracks are difficult, or you remove them and if you are able to continue or simply change the material 👍👍👍

[@motd8931]

Excellent work, wish you had shown the sharpening process also.

[@MakerHA]

Thank you my friend. What I do to sharpen it is pass it on a file to thin the edge and then on a spindle or a stone 👍👍👍

[@motd8931]

Thanks! I do my sharpening by hand, so I was interested in your process

[@MakerHA]

@@motd8931 Sometimes when I'm in a hurry I sharpen with a belt sander and then use a knife sharpener, it's much easier and faster, it takes the edge easily. Trash 120 then 400 then 600 then go to the knife sharpener

[@motd8931]

I'm a hobbyist blacksmith that dabbles with knife making. Don't have a good belt sander (yet), last few knives I made I sharpened using homemade sanding sticks, starting at 60 grit, going up to 1000. I had fun and learned a lot, and gained an appreciation for power tools. I've thought about investing in a knife sharpener that would give a quicker edge. Thanks for that!

[@MakerHA]

@@motd8931 Yes, at first I didn't have one either, but over time I saved some money, bought material and made my own sander, it's not one of the best but it works very well. Do this, save some money and invest, even if it's just for a hobby, it helps a lot in making

[@brucemorris6319]

Do you make sheaths for your knives?

[@MakerHA]

I don't, because where I live it's very difficult to find leather, and when find is very expensive. What I usually do when I sell knives is a support for exposing the knife. 👍👍👍

[@Allan-loveswoodturning]

What do you use for the handle Rivets ?

[@MakerHA]

In this knife I used copper 👍👍👍

[@ChrisMillion-zl4ik]

I don't want to be that guy, but at around 1:30, he set down his angle grinder face down, which can lead to broken cutoff wheels or a cut-up table.

[@MakerHA]

👍👍👍

[@raheemck3587]

How is making a heating system in simple process

[@MakerHA]

A charcoal grill and a hair dryer 👍👍👍

[@joseantoniocuenca5532]

capooooo

[@MakerHA]

👍👍👍

[@MrOMEGARUS]

Искренне жалко тех, кто считает что из рессоры можно хоть какое то качество получить...

[@user-sr5zl9gx6o]

форма мойки,пойдет.каждый кайфует в свое удовольствие.

[@MrOMEGARUS]

@@user-sr5zl9gx6o Но он обозвал это Супер Ножом... "Making a Super Knife..."©...

[@juliobasagoytialuna1980]

Tiene la plantilla?

[@MakerHA]

Tengo el boceto que hice, mandame un mensaje por facebook o instagram y te mando. 👍👍👍

[@starybruna3162]

👍👍👌👏👏🍺😄

[@MakerHA]

👍👍👍

[@jlf2393]

HEY BUD,HOW COMES YOU DID NOT EPOXY THE HANDLE SCALES ONTO THE TANG.

[@MakerHA]

With epoxy resin it would be, without a doubt, much safer. However, I wanted to test how it would hold with just rivets, how long it would last.👍👍👍

[@alexandrerocha1819]

Manda esse molde aí pra mim

[@MakerHA]

Eu não sei se ainda tenho o molde dela, mas me manda uma mensagem no Instagram se eu achar aqui te mando 👍👍👍

[@samisami-nb4im]

🕊️🇮🇶🕊️

[@MakerHA]

👍👍👍

[@kostadinpecanov5797]

I don't see the sharpening of the knife

[@MakerHA]

forgot to film 👍👍👍

[@DarkNight708]

Sure what tool could be more simple than angle grinder and drilling stand 😂😂

[@MakerHA]

Then there would be basic tools 👍👍👍

[@tuncaybey8763]

simple tools? dude you have power tools :)

[@MakerHA]

Yes, but simple, tools that anyone can get in a small hardware store 👍👍👍

[@tuncaybey8763]

@@MakerHA If you say so then let it be so.

[@MakerHA]

@@tuncaybey8763 What I meant is that compared to great bladesmiths, those tools I used are nothing. Because of their simplicity 👍👍👍

[@tuncaybey8763]

@@MakerHA well I expected you to make it by using file, etc. Tools good knife you made its ok but primitive ways as good as moderns

[@MakerHA]

@@tuncaybey8763 Yes, no doubt, primitive is as good as modern. What I wanted to show is that you don't need a mega structure to make a knife. Simple ones also work. I only didn't do it with files, because mine are extremely bad, I couldn't do it, and around here I can't find quality files.

[@danieltreacy6957]

Why do you let your dog bark through the whole video

[@MakerHA]

It's not my dog, it's neighbors' dogs, I don't have a dog 👍👍👍

[@sentinellivestockprotectio9709]

Wow. You must be a patient man. I’ve educated all my neighbours with barking dogs. ( zero respect for other people’s peace. ). You make an amazing knife mate. Very very nice

[@johnerickson1484]

@@MakerHA You made a great knife! Reading the comments about people picking on everything is really sad! I don't see them showing off their knives? You make them because you love the work, hobby with the tools and supplies you have at the time of the video. You are a very talented guy!

[@MakerHA]

@@johnerickson1484 Thank you my friend. Yes, unfortunately when we show our work we are subject to malicious comments, but that is human nature, to criticize without even knowing how to do something useful. A big hug for you my friend. 👍👍👍

[@mattnobrega6621]

Thats a real nice beefy blade. The handle reminds me of the old western colt revolver style pistol grips. That worth buying in my book. Great work. 🫡👍

[@MakerHA]

Thank you very much Matt 👍👍👍

[@mattnobrega6621]

@Maker HA Your very welcome. God bless and stay metal

[@john-doe-I]

Forge and drill press are not exactly "simple tools that anyone has at home" (I wish I have). Also, nylon isn't good material for scales, you can't glue them to tang, and there will be a gap - nice place for rust to settle almost immediately.

[@MakerHA]

My forge is as simple as possible, they are loose bricks and I use charcoal to heat it, since my drill is also the lowest model available, there is not much difference between it and a hand-held one. As for nylon, I like to use it because I think it's a good, soft and comfortable material, as for rust, that's why I left the blade in the forge rough, to leave a layer of burnt oil on the steel to protect against rust. , it's not 100% effective but it's still better than taking that protection away. 👍👍👍

[@john-doe-I]

@@MakerHA Still, this tools are too much for every home (at least for me - they won't fit on the balcony, where I make most of the stuff). As for forging scales as protection - on one of the blades (stainless!) I left them as evidence of "forginess", and after some soaking in water - rust start forming around them, weird. Nylon don't glue and quite slippery for the handle, recently I like to use textolite - sturdy, cheap, and can be glued with super-glue into monolith. Actually, I form thick handles by gluing relatively thin (3mm) layers, as a bonus - you can pre-cut cavity for the tang in central layers before assembling, It makes life much easier.

[@MakerHA]

@@john-doe-I Yes, not every house has space to do such work, I agree. Yes, it will rust anyway, using carbon steel it will rust, regardless of the surface treatment you do. I didn't glue the nylon, I just riveted it with this knife and I left the finish sanded with 120-grit sandpaper, that is, it was rough, so as not to be slippery. I've never worked with this material, but since it's the base of some epoxy resin, it looks really good. 👍👍👍

[@cirocleiton1346]

Top

[@MakerHA]

👍👍👍