Making A Wiring Harness From Scratch For My SUPERCHARGED 1UZ Drift Truck

[@_Gingium_]

Hope everyone is having a good Holiday week and is ready for the new year! Remember, go to mudwtr.com/gingium to get 15% off your new morning ritual!

[@gingervikingjesus2351]

Hey hold on to that factory gauge cluster circuit board, more than likely those lines on it are silver!! Worth a decent amount at your local scrap yard, if you've got a handful of them!! Or you could try to harvest it yourself.. Pick yourself up a small ceramic bowl, some time at a work bench with maybe a razor blade & a blowtorch, you could have yourself a nice little silver button by the time you're done!! Also the chunks of copper wire that you end up disposing of, I really hope you're putting them in a bucket in your shop somewhere, cuz that's worth a good bit at your local scrap yard as well!!😉🥃 They suggested electrolysis and cementation for the recovery of pure metallic silver. Recovery of silver from synthetic chloride solution is done by solvent extraction and extracted silver successfully with amines employing xylene as diluent.

[@MariDiGennahVLOGS]

Such a joy to watch your videos man. The time and effort that is put into these cars is just amazing!!

[@unknownicon901]

Killer soundtrack tho

[@geopou4618]

Crazy to think you've had this car for over 6 years now, And it's never been better than it is right now. Can't say the same about other youtubers cars.

[@_Gingium_]

And man we have so much more improvements left! Very excited

[@TheRealK1LL3RCUSSGamingChannel]

Dude is truck not car yes it’s crazy build

[@hyde_official]

I was like whtf? comment 1 day ago, how? just to remember it's from remember. anyway, this is sick. man. respect on the wiring and getting it right!

[@zionfpv]

@@hyde_official Patreon gets videos early

[@tturi2]

my daily that wasn't supposed to be a project has been non driving for 4 years lol, no all of that time is my fault but way long than expected, life happens

[@MrLagom]

Tank full 30ohm and empty 240ohm. Need to switch it on the gauge 😄

[@ilbangromero4690]

Liking for visibility

[@CherimoyaFrank]

Same here. Reacting just to give it more attention. 😉

[@camber_courtney5250]

Here to boost engagement

[@bradleyhille6163]

Program can reverse the sensor range. But yea you’re right

[@_Gingium_]

Yep, found this out when I filled the tank and it read empty 😂

[@陳品學陳品學]

I still remember when you introduced this truck six years ago, I was struggling to get myself into the graduate school I wanted. And now, not only have I got myself a master degree in vehicle engineering, I've even completed my country’s mandatory military service (I'm a Military Police Private!) too, and yet the truck is still here! Time really flies brother!

[@fabiocarra1997]

being an electrician i'm starting to really appreciate a well done car wiring and those pdm are the equivalent of House Domotics so it is preatty cool stuff

[@MrHughk1]

You need to cut a couple of slots under the weld and wrap jubilee clips round your dash bar to hold that electrical panel. Those 2 little alloy tabs will break with vibration and all that weight on them.

[@shiftymiata]

Man, this project (and the mid-engine eclipse RIP) have absolutely blown me away. This is built better than like 95% of SEMA builds, absolutely top notch.

[@Parker_white_guy]

You’ve obviously never been to SEMA, lol

[@BRTREVOR]

This is better than 100% of Sema builds.

[@MrTomuron]

I remember when you were hot glueing wires together and now you're making entire wiring harness from scratch. My man, you're an inspiration not just for me but for many

[@wakelystephenson7863]

So happy you got the clock to work. Idk why but that make me smile

[@yuGtahT]

And thus concludes my Gingium binge session! I think the gauge screen is pretty sick!

[@uknterror508]

Actually love this, most people I see that get PDM's just show an unboxing then cut to it all being done but not really going through the process. Its going to be a long while before I get to but this solidified my route on how I'm wiring my entire chassis next

[@lachiemcdonald7283]

That wiring is so clean. Doing the entire bus and Delica really helped take you to another level.

[@evanhajder]

Crazy that i've went from watching you put new wheels on fred and playing FM6 to projects like this. Time has been flying.

[@tydaysa]

This video has got to be one of the more satisfying videos you’ve dropped. Seeing all the wiring come together was super cool. Love the drift truck.

[@mrrob516]

Best wiring ive seen so far on youtube, so clean and practical.

[@rossmischnick]

love this build cant wait to see it rip. Most people are afraid of wiring but I find it highly satisfying and rewarding.

[@stefonortiz1906]

This build is absolutely MINDBLOWING. You've outdone you're AGAIN. Out of ALLLLLLL the great(baller budget) car YTers I'm consistently on edge waiting to view your latest content. Keep killing it, bro!! You're content/builds are absolutely 12/10. I'm looking forward to seeing the final product of this series. 🙏🏽🙏🏽🙏🏽

[@jasonhoover2590]

For the speekers get 4in replacements with built it tweeter then get 6x9s and boxes for behind the seats. Put a 10inch woofer between the seats up against the back wall facing forward. With that setup you should get pretty good sound without making it heavy.

[@szorcsokzsolt341]

Hi Gingium. I think you changed the Ohms at the One Gauge. Empty Ohm was 242 and full was 32. And when you did the input you set the full Ohm to 242, and the empty to 30. Maybe thats te cause of the inaccuracy. Btw, the bulid is awesome. Happy Holidays 🎉

[@gregstoddard8097]

First let me say that watching you redo the drift truck properly is awesome. I've had great fun watching the whole build and rebuild. As others have mentioned the battery disconnect should be more accessible and not behind the glove box door. Also, usually disconnects are installed on the main battery negative to make sure they completely disconnect everything. It also helps prevent arcing by having the negative as the last thing hooked up.

[@Notdb1gabe]

You and Jimmy oaks have the best built cars on yt imo

[@sofielee4122]

Check out SarahNTtuned's 1uz Celica build. Shits so clean you could eat off it

[@isaacscott4427]

This is so clean. Literal goals. Wiring always seems like magic.

[@jeromeirving4770]

The drift truck continues to be a massive inspiration. Keep up the awesome work

[@mscd9676]

Ive just been doing my lancias exhaust to the music you used in the rally miata montage and here we go drift truck content I started this engine swap because you showed me fabrication is possible with no experience, thanks man

[@GutZ_47]

youre truck is literally the blueprint to my trucks current build, except using BMW front sub/suspension and running a 2rz turbo instead of a 1uz.

[@Romulus_Voidmourn]

You and ChrisFix have the cleaners looking drift vehicle setups out of all the ones I saw

[@dave_kauffman]

The One gauge looks pretty cool! I love how nicely it mounted and looks in the dash!!

[@oskarstaudte]

These type of videos are exactly why I still watch every video on this channel since the turbo miata Best automotive content on ytb Happy holidays Caleb!!

[@dainperrault585]

I absolutely love videos like this, so satisfying to see all the planning and prep come together. Incredible use of products. Super creative, can’t wait to see a more finished interior and get all the little punch list stuff done. Great stuff man!

[@BS_kustom]

Great job, I like that ecu. I think the rear strut suspension is located in a bad position, because it is in a vulnerable position from any blow. If you touch the fence at any of the ends, the position of the rear suspension will be affected, no matter how slight it is

[@Gas_and_Pedals]

Finally!! Favorite build on KZbin 👌

[@osmiumviii4193]

Two Rockford 8" subs rocked my buddy's single cab ranger. We got them nicely in a center console.

[@vitej8591]

Dude is so good he's just making this look easy to do

[@MotorStorm]

Just a word about the automatic translation of the video titles/descriptions : Not sure if you've enable that on purpose or if it provides more visibility but I usually try to avoid these kind of videos as the translation is usually garbage and the content is often clickbaity/ai generated garbage. I've been subbed for years so I know what to expect (very good stuff), but i'm not sure it's a good thing for people not knowing the channel. Anyways : DRIFT TRUCK FINALLY!

[@SkyyMi]

This was so satisfying to watch, huge props for getting the wire knocked out. I hope to one day be able to have something worth doing this level of work to. Can't wait for the spring content

[@GttiqwT]

LETS GO GINGIUM HIDE N SEEK INTROS ARE BACK BABYYYY!!!

[@Ohrank]

Love watching you man. Makes me wanna learn. Makes me wanna act. I can't wait til my car is paid off. Instantly getting another but im gutting my current car. Gonna mess with it. Learn with it. Gonna be a fun journey. got a little bit til its paid off though unfortunately. cant wait!

[@coalblack]

You've really done a fantastic job with that truck bro, love all your vids!

[@sofielee4122]

Electronic circuit breakers like that are used pretty often in aviation, they're very nice to work with

[@matthewautry]

In the process of building up my 1991 LS400, hoping my 1uz(albeit turbo) will be as dope as yours!! Keep it up!!! If you get a moment in a video, you should do a short explanation of the required sensors and basics to get the 1uz engine running. Regardless, thnx bro!!!!

[@Drunken_Hamster]

You can look into wiring some kind of resistor and capacitor combo on that fuel bobber in order to make the resistance curve appear more linear to the gauge cluster.

[@macaboo312]

This build is insane! Keep killing it. Would be crazy to see you Jimmy O, Spoon, and Bhall get together and drive together!

[@NFSFan0011]

Have a Merry Christmas, Gingium! Thank you for these inspiring videos you make :)

[@_Gingium_]

Thank you! Happy Holidays!

[@kylee.woyote7237]

Man this thing has came a long way from angle mods and a handbrake. At the time I had a 720 with cut knuckles and welded diff and well I thought I was Ken Block lol, the drift truck is what started my obsession with your channel.👍🏻

[@Wingspan_5]

This truck is wild. So hyped to see it back.

[@Rivalistics]

Dude this has to be some of your best work so far holy crap

[@joshkersey2334]

DRIFT TRUCK CONTENT LETS GOOOOO!!!

[@Tonimm]

Adding AC would be the icing on the cake 😊. Love your builds!

[@Logan.Senhauser]

So satisfying to see all this wiring and general cleanup. Looks awesome!

[@senorpickle4207]

Because of you I bought a minitruck. It’s my favourite car even tho it’s slow, has no power steering, no AC and no suspension but it’s COOL

[@curdisdunn5414]

Like 12th attemped to get caleb to race my 03 acura cl type s super similar build to his accord down to most brands we'ev installed into the two v6 honda brand cars

[@parkerbanken1831]

Drift truck content>>>

[@macaulayholland3516]

Sweet ivbeen waitifor this video. Merry Christmas bro 😊

[@ContasYT]

love the attention to all the small details

[@jmore8128]

CANT WAIT FOR THIS TRUCK TO BE FINISHED 🔥🔥🔥

[@kanebedford567]

Its crazy for me to think your the same guy i watched stickerbomb your focus dash 9 years ago keep up the good work brother

[@djmyth84]

So lovely to see you use duetch connectors there. Everytime i upgrade something on my car i use it. Even my speakers have it 😂

[@_Gingium_]

deutsch connectors are the best thing ever

[@markj.6276]

I think you do a great job of wiring and explaining wiring.

[@within_cells]

Incredible work as usual my guy

[@lomeas]

this is what we are here for! great vid man!

[@epp9122]

Put the battery in a box in case of it blowing up:)

[@Incaensio]

Merry Christmas brother. Much love and respect to you.

[@IAmBlux]

Love to see the progress! Can't wait to see it driving again and back on the track.

[@_Gingium_]

Very very soon!

[@bigred913]

crazy you posted this as im about to completely rewire my 91 first gen cummins

[@NotSean269]

Oh man, as someone who's done motorsports wiring, seeing a fusebox and a PDM side by side is honestly the most painful thing. You could have done your IGN, and all the functions off the Canbus keyboard, also both for FIA and common sense the main cut-off should be able to be reached by both people in the car when they are strapped in, going with a proper cut-off and doing a cable to the outside of the car so the marshalls can also pull the cut off if you put it into the wall and systems are still running.

[@dalynhoogs9396]

Super fun video man wiring is a pain but so satisfying 🔥🔥

[@WouterB76]

It's all coming together very nice Caleb!

[@vedrankoturic4998]

Amazing work, just as always. Keep it up bro, wish you a happy christmas and a ton of these builds next year :)

[@802Garage]

Mmm that link PDM is tasty. Nice work!

[@jenniferburr9791]

You are super talented! Love your channel.

[@66slammed]

Looks phenomenal nice work

[@LifeInJambles]

Sheeeeeesh. Whatta banger.

[@_Gingium_]

Appreciate it 🙏

[@ttinnovations3310]

Truck looks Amazing, one of my Favorite G. Projects!!!

[@zerodqkov341]

Wiring is so fun 😊

[@PDXMX83]

Ahhhhhh back from the dead!!!

[@noiiaz96]

Is there a reason to have to manually activate water pump, intercooler, etc. rather than just have the ECU do it?

[@mmodtomic7119]

Just like having a working AC, leaving in sound deadening, having a working cruise control, carpeting, heat and other creature comforts...it takes a while for these guys to learn. But they usually do eventually. Race car stuff seems cool, but it's really just a pain.

[@boosted242]

Twin exhaust lolzer. Great work!

[@Timothystrunk-h9s]

I like the longer videos with the drift truck

[@mastercricket7626]

Damn bro , you killed this for sure .. came out mint af too man , seriously, that looks better than factory for sure and clean ... and i might have to check into that "One Guage" digital dash to bro , thats rad af and i been wamt to convert just aint been sold till now 💪🏽.. keep at it bro and ya be on track for the spring ... peace and love all, keep it rad, stay safe, and build on..l8r famz and keep having fun all

[@marvinstober6335]

I love this truck ...keep up the good work bro ...

[@mahdialsenussi3066]

Nice work 👍🏼

[@stantheman5163]

Nicely done.

[@Blurgamer17]

6:40 The disc brake really puts a _stop_ to the aluminums movement, huh? 😅

I was in 4th grade when you dropped the v8 drift truck build in 10 mins video and now in 10th

[@GlitchGarage]

Amazing! I love nice wiring

[@Timothystrunk-h9s]

I wish I had one of those plasma tables. Instead of buying little parts you can just make them 😂

[@TheJayKnight]

Me: I hope there's plenty of adieu in this video Gingium: 0:22 Me: goddamnit

[@eliasmachalek4856]

Hol shmoly this truck is going to be so clean!

[@Cole.Van.]

Ohm readings for the fuel level sender got flipped 180 in the settings👍

[@timjeanjaquet5576]

does Konig have a booth at SEMA. You should seriously try to get this there like I really think this build is that good

[@stanley4290]

do you want the frequency of the power switch wire so close to the pdm?

[@Rasigarage]

Good 👍 stuff

[@dmdhl7]

Hard to tell from the video but it looks like you are using DT connectors. If you are, you may want to check how many amps the larger accessories are pulling. The DT connectors use a size 16 contact and they are only rated to 13 amps per pin. The DTP series use a size 12 and are rated to 25 amps per pin. Might be cutting it close on the fans or fuel pump.

[@J0ECOX]

This is like a vip drift truck with all these features lol are you planning to add an electric heater for when it rains and fogs the cabin?

[@firejetrd3207]

Que bueno que estés usando traductor 🎉🎉🎉🎉🎉

[@aircivic87]

How do you like that atoto radio so far? It looks like it booted up pretty fast.. also I would really love to see some car audio focused stuff. Even if it's a cpl short videos or clips. Thank you for sharing with us. I look forward to your ingenuity on your videos. 🍺😁

[@sixbolt]

Came out sweet, love the PDM stuff! Quick question, can’t the ecu control the fuel pumps, fans and intercooler in doing so eliminate the need for 3 switches and forgetting to turn the fans and pumps on yourself at the track?

[@MsChristianskogland]

The Milwaukee heat gun you have there ? Is it good?

[@cristianoespa1249]

good as usual! and as for the Volvo, what happened to it? A hug from Italy ❤

[@Arodriguez_zeugirdorA]

Caleb has come a long way from messing with Fred in his parents driveway.