Making an Anvil from Railroad Track

In this video, I am making an anvil from some old railroad track - a classic KZbin project. No nonsense, no sponsors just getting outside and making a cool thing from a piece of scrap metal.
Hope you enjoy it!
Please consider supporting me on Patreon for early access to videos and to help keep quality content like this coming: www.patreon.com/TheArtOfWeapo...
Check out my Instagram for more updates: / theartofweapons
All music used is royalty-free.

[@taow]

In this video, I am making an anvil from some old railroad track - a classic KZbin project. No nonsense, no sponsors just getting outside and making a cool thing from a piece of scrap metal. Hope you enjoy it!

[@Dapstart]

Turned out great!

[@Nighthawkinlight]

Really nice filming and editing on this. You should try Diablo brand grinder wheels. No joke you could have done all this cutting with maybe 3 discs. They last 10x longer than the cheap ones.

[@taow]

Thanks man! I'll check them out, definitely burned through a lot more than that on this project

[@frenchcreekvalley]

Nice job and looks great. But for those who wish to make one, I strongly suggest that you take your piece of railroad track to any welding shop, after marking out the cuts you want, and have them torch or plasma cut the rough shape. I will bet that the cost will be less than the cost of all the grinder disks that you used.

[@westinle]

I can say with certainty that this is the most aesthetic anvil tutorial ever produced 👏

[@SuperEpic-vb8nq]

You ought to take the rest of the railroad track and use it as a striking face for a homemade power hammer. That would be cool

[@richardamullens]

Look out for discarded disks that are used as weights to tension overhead cables on the rail network. Maybe some can be found in station car parks. They are very heavy too.

[@juver890]

O the joy of using big power tools to shape even bigger lumps of metal into what you want it to be

[@Wrecks22]

Glad to see you posting again. Great build for a smithy just starting out. Keep up the great work.

[@madsillywilly4408]

Really nice work! A wee tip if you don't mind. Sharp corners tend to make cold shut when forging and should therefore be rounded over more. The more one increases the radius the less chance of cold shuts. I recommend getting at least a 4 mm radius. Except for the corners you use for scoring or cutting materials with ofc

[@sneakysnail9225]

Damn bro last time I saw vid of yours your voice was a whole octave higher 💀💀💀 good shit man

[@lukearts2954]

♥ lovely anvil! Perhaps you can use the other material for a "hardy hole" unit with a bunch of the most common inserts. If you make it to the dimensions of existing anvil hardy holes, it's compatible with existing tooling. It would also work as anvil for driving punches through your workpiece.

[@Freizeitflugsphaere]

This is the most beautiful railroad anvil I have ever seen! You clearly put a huge amount of effort into it. Happy forging💪🏻💪🏻 Love from Austria 🇦🇹

[@mushroomsamba82]

Yo! I totally forgot about this channel. I remember watching it years ago when this guy was a teenager making illegal shuriken in his backyard!

[@taow]

Those were the days

[@Antipodean33]

Looks real good considering you don't think your weld are very good looks wise, but as you say as long as it's functional and done to a sufficient standard thats all that matters. It looks like a ton of work though, burning out a brand new 9 inch Makita is no joke (as well as a cheapy grinder) if you were to price it if you wanted to sell it you'd have to get tens of 1000's to cover costs of material, tools, electricity on top of an hourly labor cost. You'd never get anywhere near enough to cover costs and thats considering the railway line was free. I thought I'd mention that in case some dummy out there thinks they could make money out of anvil making. Anyway you've ended up with a great looking anvil that will be around for centuries to come

[@creativecomposites6193]

Whittling with a metal cutter nice! Great project and skills, thanks for posting.

[@Slayerofmothers]

Huge respect for the amount of time you spent filing!

[@Kotdt1]

Great video

[@DktheWelder]

Excellent work , a lot of hours and looks like it is pretty hard too!

[@benspeedschannel888]

Cracking job 👍👍

[@sacriptex5870]

i did the same years ago with a piece of rail, man thats a Hardcore Job!!! Greetings from Brazil!! its cool to see your channel again i remember you back in 2015. your voice changed a lot since! i hope you the best! your videos are awesome!

[@DaveLennonCopeland]

Just you and a grinder, fantastic. Incredible looking anvil. 😃

[@StageRightvideo]

I think everyone has a secret yearning to make a rail track anvil one day. Few people actually realise the dream though. I just make do with a cast iron 56 lb weight but maybe just one day...

[@laser8389]

Welcome back! This is a cool project :)

[@TuttleScott]

It's not hardened now but the more you use it the harder it'll get.

[@daysejones968]

love your vids

[@brothyr]

Oxy/fuel torch would've been a 2min cut and a few minutes for rough shaping.

[@AdityaSharma-eh6ff]

love ur videos bro!! any update about the cnc build series?

[@taow]

Thanks! Unfortunately haven't had much time to work on the big cnc so far this year, but I am going to graduate soon and hopefully have some more time to work on it! It hasn't been forgotten about...

[@AdityaSharma-eh6ff]

@@taow 💯💯

[@marienkijne]

Good to see you again on my subscription feed mate!

[@bob_mosavo]

Thanks 👍

[@didms1526]

love the video as always sir! What are you doing nowadays, just youtube or anything related to the degree you did? Been following your channel for a long time now, always loved your content :)

[@taow]

Thanks for sticking with it, nice to see people coming back over the years. I've still got a few months left of the degree to go, and will hopefully have some time for some more projects over the summer when I'm done. Will be working as a mechanical engineer after the summer when I graduate.

[@Manu.Makes.Things]

Cut out a square hole for tool holding

[@oneuponedown]

Rail road track makes literally the worst anvils. There is no mass to them and the work surface is small as hell. You would be better off getting a giant thick chunk of steal from a scrap yard and use that as a anvil.

[@taylorsessions4143]

Everyone is an anvil maker on the Internet

[@Dapstart]

I mean he added mass by welding those side pieces on, I don't see why this wouldn't be a good anvil.

[@PeterHertel]

Thank you for your expert insight. I'll make my next anvil out of marshmallows since rail road track is the worst it can't be that bad.

[@Sketchy_Dood]

Clearly you’ve never seen a jewellers anvil, they’re even smaller than the one he’s made

[@THusbands]

No anvil is worse