Making An Oil Catch Can

[@hi_is_this_clorox_bleach]

What is the function of the breather

[@extrap51]

Question, why do you have a vent in the side when you already have a vent on the top

[@Jgarage5]

Corey portelli My guess, is the filter breather is a bypass if things get clogged. The inlet on top is from pcv, getting vacuumed from the outlet by the intake.

[@Jakedrifts]

@@Jgarage5 if the top bung connects to the intake the vacuum pressure will suck oil back into the intake due to the long tube the bung is welded to, which defeats the purpose of the catch can?

[@ungwigwi]

I have heard steel wool is not good due to the water mixed with the oil , can cause oxidation ( rust ) in the steel , I think stainless steel would be a far better option , thanks for your build vid , wish it had access to the chamber to replace the now rusted steel wool. Good luck

[@DanmosWorld]

+Ken Harvest that's a good point

[@DanmosWorld]

+Ken Harvest that's a good point

[@Ljayautotechtv090683]

Good job bro imformative idea

[@DanmosWorld]

Thank you

[@hi_is_this_clorox_bleach]

where did you get the hose fittings

[@DanmosWorld]

Jegs

[@No_Legos]

Great video! You said peacock! =D

[@GarryFullerSr]

Nice job.

[@DanmosWorld]

+Garry Fuller Sr thank you.

[@samishukir604]

Tanks

[@PacoRdgz1]

where can i get or what is the name of those hose connectors

[@DanmosWorld]

1/4" Aluminum Weld On Hose Barb !Made in USA! www.amazon.com/dp/B01MQ30RA7/ref=cm_sw_r_cp_apa_i_E7GfBbSWTRXTH

[@bobisthebuilder3982]

Nice job. Does this have an oil return line? Fresh warm oil in the can is fine to return to the engine

[@DanmosWorld]

+Bob Is The Builder no the guy that wanted this just wanted a drain plug on the bottom. Thank you for the compliment though

[@hi_is_this_clorox_bleach]

I thought the point was to keep oil from returning. Or is it to keep oil from getting into the intake and causing buildup

[@09lifehack]

Here is my 2008 Nissan Sentra oil catch can configuration and the end-product result. 04m37s ~ 05m04s discolored gasoline sludge and carbon residues safely trapped in engine oil catch can oil catch tank kzbin.info/www/bejne/rnTJmZiYgLKFmLc 오일 캐치캔 캐치탱크 장착했습니다. 가솔린 휘발유 차량이고 포집된 기름 상태 찐득찐득합니다. 2014 Hyundai Tucson SUV oil catch can end result kzbin.info/www/bejne/aKjZpqOGgLqYiqc 자동차 엔진 수명 연장~ 집에서 일반인 누구나 DIY 가능 최소비용 최대가성비 The most cost-effective engine DIY maintenance at home kzbin.info/www/bejne/bHWvn2Ohfs5gbpY

[@brussell639]

I see some problems with the design.

[@PeterPetrakis]

I literally can't tell you how helpful your comment is

[@brussell639]

@@PeterPetrakis Lol, I guess I could have been a little more specific, eh?

[@chriskubond6314]

What problems do u see?

[@brussell639]

@@chriskubond6314 1) he used steel wool instead of the steel coils (pot scrubber) for the filter media. On top of that, he used way too much. The steel wool will break apart and can get sucked back in thru the engine... but his won't because of the vacuum leak. 2) if you're going to run a vent filter on a closed loop pcv system (relying on engine vacuum) the vent filter needs a check valve so the vacuum side isn't just pulling air thru that filter. That filter should only allow air to escape in the times when the crankcase pressure exceeds what the engine vacuum can evacuate. To my knowledge the mighty mouse catch can is the only one employing a check valve in the air filter. I'm not endorsing them, I'm just saying they're the only can I've seen do it right. 3) I would have cut the intake pipe off just after it passes thru the baffle. If you take it to the bottom (as shown in this one) you can have a backflow of oil because the tube coming in will be submerged in the can, and it's not getting any help from the vacuum side because of that air filter. The materials and workmanship look great. He did build a nice looking can. I just know the design of it could be better.

[@chriskubond6314]

@@brussell639 good info. I'm trying to build my own catch can and need as much imput as possible. Thanks brotha

[@09lifehack]

DIY Oil Catch Can on 2014 Hyundai and 2008 Nissan. 저도 캐치캔 장착했습니다. 가솔린 휘발유 차량이고 포집된 기름 상태 찐득찐득합니다. kzbin.info/www/bejne/aKjZpqOGgLqYiqc kzbin.info/www/bejne/rnTJmZiYgLKFmLc 오일캐치탱크 포집불순물 실물확인 원리 부품선정 설치 위치선택 설치옵션 주의사항 관리요령. 내연기관 엔진 수명을 늘려 존버하기. 오일캐치캔의 모든것 Oil Catch Can Tank

[@JodBronson]

Goo Job on making one, but you can get them for like 15 Bucks! Good Quality too and Filter Housing Built-In as well :D

[@DanmosWorld]

+Jordan Bronson but then u can't say you made it lol

[@JodBronson]

+Danmo's World - LMFAO !!! I spend time making Money, then I buy... Take me less than 10 minutes to make $15 Bucks... Take me Hours to make a Can, ok.............. LMFAO !!!!

[@Ryan_1997]

@@JodBronson you clearly miss the point on makin something for your ride vs. buyin somethin already made. You point it on on your ride that "I made that".

[@JodBronson]

@@Ryan_1997 - Sure, if you are making a Space Shuttle! For a $15.00 Catch Can? I'd be embarrassed to point that out to anyone! Maybe grow some 'Self Esteem', because it's NOT a 3rd Grader of Show-and-Tell! 😂😂😂😂😂😂😂😂😂😂😂😂😂

[@jacobheydt1397]

There is only one job I know of that you make $15 in ten minutes.🤤🤤🍆 Not the route I would take but live your life brother!!!!!!