Making Electric Scissor Lift Table

[@paraglidingprospector]

Oooh that painted finished product is phenomenal! Great work!

[@peteryeung111]

This is really a no nonsense, straight to the point video. Great job sir!

[@Patriottoo2]

Amazing amount of labor went into this lift. I was tired before I started watching... now, I'm, really, beat. But, I watched the whole thing. Well done!

[@tobymilo8625]

Absolutely amazing work! You make everything look so easy even though they are not. Thanks for sharing your talent. Keep posting videos

[@WorkshopFromScratch]

Thank you 😁

[@simplepleasures14]

@@WorkshopFromScratch Good day from Bermuda!!....would you have shop plans available for this scissor lift because I would love to make one myself......OR if you make and sell them HINT..HINT!

[@m.c.o.3068]

The video is enjoyable to watch - thankyou. I would like to suggest a much different application of the device demonstrated, for anyone interested: An electric hydraulic scissor lift bench, (about 18" x 6'), operated by remote control, and finished as interior furniture, could be useful in an elderly or disabled household. The bench would have to lower to about 3 or 4" from the floor and then rise, (using the portable remote), to about 20". The bench could be used by an individual or with a caregiver, to help a person recover to a sitting/standing position from a fall. Thanks.

[@dt9094]

I have to add, YOUR AN AWSOME BUILDER

[@johnmclarnon5890]

You know, I am very much enjoying this video, as I can see that the individual doing the welding . . . can actually lay down some really nice welds ! !

[@WorkshopFromScratch]

Thank you :) But there are no nice welds in this project, I had a problem with fusion of the weld because the mass cable burned out and I noticed it quite late 😂

[@GmKofHard]

I have to admit that looks beautiful!

[@tapioca7115]

Hi WFS, Your videos bring me inspiration. Who knew someone can fabricate such complex projects in the home garage/ shed ? Thank you for sharing your talent & ideas with us !!!

[@WorkshopFromScratch]

Thank you 😁

[@freddybrea6629]

@@WorkshopFromScratch muy bien que Dios te bendiga

[@wamz328]

@@WorkshopFromScratch Great job and good workmanship

[@VseSamVladimir]

Хорошая идея тележка Чтоб подвести движок надо купить лебедку за 10 тр и акб за 4три а так ничего хорошая поделка для гаража для рядового клерка

[@傳奇領隊]

Having a fully equipped machine workshop is most important. Good weld skill and machining.👍

[@daipower1]

You need to start doing plans or show us how you plan your builds. Really enjoyed that mate, thank you. Dai

[@Sl20]

Probably when you went to school you used sit in the back of the classroom and always drawing you got every drawing on the top of your head !!!!!! Amazing Congratulations

[@АндрейСтракашин-ж7о]

Шикарное исполнение. Огромный труд проделан. Мастеру браво и респект. 👋👋👋👍👍👍🤝🤝🤝🔥🔥🔥

[@РомаСуханов-м2э]

Интересно бы узнать грузоподъёмность данного устройства?

[@РомаСуханов-м2э]

А всё увидел в описании!

[@beakittelscherz5419]

Awesome video. Thanks. also for decent Music. Really appreciate that👌🔧🎧👌

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼…. I bought one that is hydraulic. I never knew I needed one, until I got one, now I don’t know how I got by without one!! It’s indispensable in my garage now. Very nice build!!! 👍🏼👍🏼

[@WorkshopFromScratch]

Yes, it makes work much easier 😀 Thank you 😁

[@brucemorris6319]

Nice work 👍

[@cranetraining]

Appreciate and lots of love❤ from India🇮🇳🇮🇳

[@heliocorrea9121]

Um vídeo que da pra assistir do começo ao fim. O cara é especialista no que faz. Um equipamento muito útil. Meus parabéns. 🇧🇷🇧🇷

[@sergiosilva3577]

concordo com vc gosto muito desse tipo de vídeo

[@NobregaSan]

Achei top. Mas me deixou pensando em quanto tempo dura essa bateria e como ele faz pra carregar.

[@joelongstaff7601]

Sir thankyou for a great build. I am collecting the parts to build a 40 inch surface drum sander. I am going to build closets for three bedrooms and I need the big sander. When you see the feed tables on DIY drum sanders I wanted better and your build is exactly that. Thanks again. God bless.

[@AGRIMOVIEemi]

Superlike 👍👍👍

[@ВладимирРыжко-у7й]

Супер тележка !!! Респект мастеру, все красиво и профессионально. Желаю вам творчества в вашей работе !!!

[@АнатолийСушков-б2э]

Только тележка!!!!не более.

[@mrfunnylookinhayes9088]

I wish he would have put bigger wheels on it. To make it easier to go across any surface. But what an amazing job. Love the kills.

[@screwsnutsandbolts]

Awesome build as always ! 👍👍

[@geniusosa]

Super aż miło popatrzeć na taką pracę. Fajne zaplecze maszynowe. Ja jestem w trakcie budowy malej tokarki ale idzie mi opornie...

[@tomjohns8498]

🌟⭐🌟 what a great idea there is so many add ons you could bolt on, thank you for sharing 😊

[@williamlott7612]

Very nice, excellent job. Darlington, South Carolina USA

[@DanKoning777]

I hit the like button before I even watched the whole video; I knew this was going to turn out great. Well done.

[@WorkshopFromScratch]

Thank you 😁

[@scroungasworkshop4663]

It’s nice to see someone that can actually weld. There is another channel called Made in Poland which is very similar in that they make a lot of their own workshop equipment too and those guys can really weld as well. Their preferred colour is blue but I like Workshop from Scratch’s orange. They’re both great and inspiring channels. Cheers Stuart 🇦🇺

[@electronic7979]

Excellent project

[@WorkshopFromScratch]

Thank you 😁

[@karenchamu8361]

Excelente proyecto!! Tienes planos de este diseño?

[@gucfa3087]

Genialne. Warto sobie życie ułatwiać i bezsensownie nie dźwigać oszczędzając kręgosłup.

[@WorkshopFromScratch]

Dziękuje 😁

[@eggbertfarnsworth5787]

Great video and very nice, although it does bring whole new meaning to a 1000 lb lift cart!

[@fabien8422]

Realy a good job! 👍

[@1924ab]

Save the back! Nice work.

[@FALLONandTheFiveFurryBabies]

Truly wish that I had a workshop like yours so I could attempt to make items like these! I so need one of these right now I am now going to see if I can find a used one thats not the same price as my mortgage!

[@ARDYKRIS]

Good job,my friend.....👏👏👍

[@codyglade899]

well done!! looks like something you would buy at a store after you painted it

[@dt9094]

Excellent welding skills. Not to mention all the cool stuff you have built. Thank you. 🇨🇦

[@allenhunt3070]

Nice build for a super useful lift.

[@lloydprunier4415]

Very nice build and you have given me a solution to my leaky hydraulic jack on my HF motorcycle lift! Thanks!

[@WorkshopFromScratch]

Thank you 😁

[@MannistoCay]

Ok that’s an awesome build!

[@gabrielbautistaalatorre5478]

Good job! thanks for sharing your knowledge. I follow you in Mexico

[@Yerzhan0107]

Базар жоқ...👍👍👍👍

[@GabrielBarella]

Congrats man! Amazing job! Please, can you tell me which motor you used? Do you have data sheet of it? tks!

[@DewaSenapanIndonesia]

this good job can inspire many people

[@Robocoppat]

Even though you would have to do a lot more fabrication to make this a working motorcycle table, I'm curious to the weight it holds now? Great job 👍😃

[@lelisatachaguacabrera1408]

Fkpsh

[@bluesteelworx]

I'm curious about if the cable brakes

[@prepertruckin8525]

⭕️my thoughts exactly, as to the use... judging by the materials used i guess 600 to 700 pounds all day long. as far as the height goes, at least 4 inches shorter to fit under most bikes ... some low rider Harleys maby 5 inches shorter... but the battery for the pulley system would need to be beefed up a bit more, if it were an everyday use to lift a 1200GS BMW ... but overall, I'm impressed 😎

[@pardonzakaleya850]

😂😂😂 brilliant idea I love that 100%

[@amazingmechanics544]

Great job bro👍👍

[@wamz328]

Good job my friend and excellent workmanship

[@jasonlewis7259]

I'm going to make one I like your design I'll make it a bit different so I can help lift my grandparents

[@perjalananwaktu72]

Bagus boss meja hidroliknya saya suka,bisa jadi troli.sukses selalu

[@hectoranibalcruzrodriguez6834]

Felicitaciones, es un genio. Un excelente trabajo y de calida. Como se solicita un motor como el que instalo,

[@glenpaul3606]

Great build. Everything you make is tertific...top quality. Like your paint scheme also. A joy to watch your videos.

[@davidwood1923]

Wow!... Looks like a Very Handy addition to and Workshop. Thanks for Sharing

[@christophercobb4317]

Thank you for making that video

[@haistonaby8762]

Beautifully done

[@charlybrown8993]

Great job mister 👍

[@SupLoFunGame]

Great video Bro!

[@puntabachata]

Great video! Thank you for not ruining it with annoying music.

[@dylannicholson950]

Great fab skill! Suggestion from an engineer, move the motor to the base no moving electric cables 👍

[@WorkshopFromScratch]

Generally, the table was supposed to be hydraulic and I even reworked the hydraulic lift for this table, but it turned out that it took a long time to pump to raise the table, so I decided to equip it with a winch, the tube on the scissors to which the actuator was to be attached was in the way, so I mounted it on the upper part

[@БусБульбаш]

Что ещё нужно для дома, класс и работа и съёмки все супер, привет из Белоруссии

[@МаксимТуров-с4п]

При сегоднешних ценах на металл, это тележка золотая... 😁👍👍👍 Молодец!

[@AdeAhmat]

Nicely built.

[@WorkshopFromScratch]

Thank you 😁

[@teamfrenkenstein4143]

I like watching you build stuff, but it would be nice if you gave a description of the shaft that you’re using and the bearing size

[@inventor1978]

ThanK You Share video good job!

[@MariniProduction2021]

beautiful, painted is even more absurd😍😍😍

[@9gtv0790]

Great job! 👍

[@saidfahmi9805]

Good job 👍👍👍👍👍👍👍👍👍👍

[@marydesiderio80]

Good job 👍 bro 👌

[@timjsph2439]

Hey man , thank you for sharing this video, quality craftsmanship,

[@Sl20]

Hi !!!!!!to the editor you sure did an amazing job !!!!!!!! Like a puzzle all together really well!!!!!

[@user-diamond_square]

Good projekt 🌹🌹

[@yveswart369]

Nice job. 👍👍I like

[@WorkshopFromScratch]

Thanks 😁

[@o_ra1572]

Awesome work! Saves you a lot from lifting heavy things 👍🏻 I would put some rubber mat on the table so it wont be slippery and doesnt get scrathed and start to rust.

[@WorkshopFromScratch]

Thank you 😁 Great idea with a rubber mat :)

[@hunterm.172]

This guy doesn’t cut corners-he rounds them lol Great work!

[@Weldinginlove]

Very interesting 😍🤩🧑‍🏭

[@welintonlincoln1672]

Agora o KZbin acertou. Eu estava a procura de um vídeo desse semana passada e penei e não consegui. Top

[@rodrigog666]

soportará 100 Kg??? excelente trabajo.

[@Ebikelover]

Your projects are all so cool and your videos are very entertaining.

[@WorkshopFromScratch]

Thank you 😁

[@harshakumar007]

Awesome. Good stuff mate.

[@WorkshopFromScratch]

Thank you 😁

[@JanKowalski-op6rf]

Super wyszło :) czekamy na kolejny projekt. Jakąś nalepką zaprojektuj indywidualną i naklejaj na każdy swój sprzęt który opracujesz.

[@WorkshopFromScratch]

Dziękuje😁 A dzięki za pomysł z naklejką muszę nad tym pomyśleć :) Pozdrawiam

[@Павелфёдоров-р9ж]

Не плохая идея, интересно сколько грузоподъёмность?

[@reniermorales1010]

you have a nice machine. you may level it up by adding a complex pulley system for more pulling power or change the machine by a jack or a hydraulic

[@rubenbates2709]

Awesome, thanks for the video

[@mohaabdi8056]

Most amazing DIY projects I love watching!

[@WorkshopFromScratch]

Thank you 😁

[@andyb7754]

Very nice build.

[@Delali]

This is just so beautiful to watch. As a fellow content creator i can really appreciate the amount of effort in this video...Well done friend.

[@akbarchaki9579]

Awesome work 🌷🌷🌷

[@WorkshopFromScratch]

Thank you 😁

[@ratrod6161]

Awsome lift wish I had one

[@design8studio]

Nice work!

[@SM-hz8uz]

Great job well thought out

[@frandivine3378]

Think u could make a snow plow type thing that can hook on to a riding mower..like a John deere D140?..just needing an idea of how to get it done..if it's even possible

[@emanuelferreira4188]

Chique demais, parabéns... 👏👏👏👏👏

[@Mocking69]

It's a wonderful table cart ♪

[@MrStevo1080]

Love it. But why isnt winch on bottom?

[@frediefarmer]

👍🏽🇺🇸👍🏽. Nice build

[@jimgree]

Nice to see quality work.

[@WorkshopFromScratch]

Thank you 😁

[@pietroesposito782]

can we have the drawing with the measurements of this beautiful work?

[@eduki]

That's great. How many kg can it handle? Do you think that it could lift a person? Like... 150kg max?

[@Alrukitaf]

Great work! Is that 5mm flat bar? And what is the thickness of the plate please?