Making My Friend a Meteorite and Platinum Wedding Ring

[@tanman4441]

I've been telling my wife I want one of your meteorite rings for years now. It would be like buying a Rolex for a business man to me 😊

[@MikeHarris1984]

Wife and I have purchased 3 diffrent rings from ya, and LOVE the quality... I dont like a heavy ring, it makes my arthritis in my hand really activate and by the end of the day, my knucles are swollen (already a Ring size 13.5) and in pain just to move... so I use a Ceramic black ring for my wedding ring... and it got beat up over the years... Now I replaced it with the PartriC Adair Star Dust Black Ceramic ring... the weight is perfect, and the quality and for over a year and a half, still looks good and new.... LOVE IT!!! And the glow properties are insane.... I will have it on and we lay in bed for a few hours before turning off tv and everything to go to sleep.... after we do, my ring glows in the dark room for about 2 hours solid.... sometimes I will wake up a few hours later and it still is glowing a little. Thank you for your craftsmanship and quality rings!!!! You design things like no one else... I wanted to do the super conductor, but it would be too heavy for me. My wife has her ring that is full of diamonds and will grab your eye its so shiney and sparkely that was 10's of k... and she gets more complements on your "The Boundless Sunken Artifact Glowstone" when she wears it! Just amazing work! Keep it up!!!

[@Hortonscakes]

I got my wish on seeing Patrick in a video! I plan on getting my husband one of your rings for our 20th anniversary in 4 years. So I'm saving and planning on how I want it done. Yeah, 4 years seems like a long time, but it's going to happen! Unless he or I pass, but we are only in our 40s.

[@alancalvillo6756]

I think she loves that new Meteorite and Platinum Wedding Ring you made

[@bigfan6016]

I love watching you create. It's calming!

[@cakekookabura]

You finally did it! I remember asking about something similar some years back, before you did any precious metals

[@johntornay419]

Thanks Ryan Reynolds! I have a pure muonionalusta ring that I want to either line the inside of or use as an inlay, but I couldn't find any good demonstrations before of how to do it. This is a big help.

[@Tokos-TiikoæT]

Gotta hand it to you man, another great ring. Keep up the great work fam.

[@8lackSun]

Greate job! From Universe to Earth, from Master to People👏👏👏

[@simonvidajewelry]

You did beautiful job on this one and it is nice to see you in video 🙂. You were actually my inspiration to start my small business and now it is my Full time job after few years 😁. Thank you Patrick 🙏

[@PatrickAdairDesigns]

Wow that’s amazing! It’s good to be back!

[@lilgalbi]

Would it be possible to order a custom hammered platinum ring from you? Your rings are unmatched, and I love your work!

[@IgorDeCamps]

That Came out Beautiful gonna have to get myself a PAD ring.

[@Algoldprospecting]

Awesome I do a lot of lapidary and wood work. I definitely want to make some rings of yours. You do any samples or demos?

[@NightWiz11]

Hi Patrick, can you please make a video on making the Copper Burl Carbon Fiber ring? I really wanna see it❤

[@Spartikin]

that looks so cool, the ring you show at the end with the plack of the platinum, what was the black material?

[@danielzubli7969]

It would be super cool if you made a Shang chi rings of power ring.

[@lukebeckwith4148]

What kind of lathe do you use. I have a bench top lathe that I use for my pen making. What are some of the speeds do you use to make your rings

[@johnmaley3020]

where do you get the propane/oxygen jewlers torch setup? im trying to solder some thicker copper jump rings and the propane just aint quite hot enough to do it. i like the setup your using though, instead of buying a full on oxy/acetelyne setup

[@ryandavis4448]

Im currently working on ring like this for myself. Just silver instead of platinum.

[@ryandavis4448]

UPDATE: Do not solder the meteorite to the ring itself, it destroys the widdenstat patterns.

[@randallblack6525]

What is the cost of that ring? Its gorgeous!

[@igorson2907]

on which finger i should wear a ring that's only for decoration?

[@francoisbasson3745]

Hi. Do you take custom ring ideas? I've a special idea for a male engagement ring for someone I know

[@alister2755]

Hey man i decided to make me and my girlfriend matching rings and im in love with that obsidian series style so im making that styleof ring, i would like a quick tip on how thick i should make the ring itself i have 4mm currently in my plan but maybe i should make it just a bit thinner i dont know please let me know what you think.

[@PatrickAdairDesigns]

I’d make it no thicker than 3mm if you want it to be comfortable. I typically make my rings 2.6mm thick. But there’s not right or wrong answer, feel free to experiment and pick what you like best!

[@azbc8369]

Hi! How thick do you usually do your rings? I kinda want to try making one for myself

[@PatrickAdairDesigns]

2.7mm is my go to.

[@mr.nobody2765]

Iv been looking for someone to make a ring i need a randbow design with something etched but i cant find someone to do it idk if u guy could do something like thag

[@MikeHarris1984]

im surprised you are using Propane and 02, and not using MAP and 02. MAP burns hotter and faster... you wont have to hold as long as you do with Propane... For sweating copper, I use MAP over Propane all day... Propane can take what seams like an errernity to heat up for the solder to pull in and set. where MAP (Yellow Bottles) heats up in just about 30 seconds or so and set solder...

[@PatrickAdairDesigns]

It’s just what I had on hand, but I’ll pickup a MAP cylinder next time and give it a try!

[@joshuabaughn3734]

Did it put them in the ER? Like that one girl on Untold Stories of The ER? They definitely didn't have you make that one because your work is precise, that on the other hand was shoddy! Girl was the best friend of this lady and helped her fiancé pick out her surprise engagement ring and it got stuck. The doctors couldn't get it off so maintenance was called down with a diamond Dremel blade yeah, a diamond blade to cut the ring off the woman's finger. After the hand surgeon got there, the ring is cut off while the Fiancé was on the phone with said friend, she knew he was going to propose and told him to not go too overboard. She bluffed the cutting sound as driving through construction.

[@konmat0723]

Try harley-davidson inspired design.

[@human840]

How did you get almost 900k subs only gets 20 to 30k views

[@PatrickAdairDesigns]

I’ve been pretty busy with a lot of behind the scenes stuff over the last few years so the views have definitely suffered! But that’s alright, I still really appreciate you guys!

[@thehibbi]

Does anybody have experience with their Koa wood + forged carbon fiber + gold ring? I really like the looks of it, but I am afraid that washing my hands while wearing the ring might damage it. Also I am not too sure about the durability of the resin + carbon fiber combo. Would be really glad to hear some feedback. Btw, the ring in this video looks very nice! I also ordered one of the meteorite rings recently and can‘t wait to receive it.

[@PatrickAdairDesigns]

We stabilize our koa wood so you shouldn’t have any issues with durability. I’d just recommend keeping it away from salt water or any super prolonged contact with liquids.

[@thehibbi]

@@PatrickAdairDesigns thanks for the answer, that's good to hear. I will consider getting that ring too, when I have received my meteorite ring and am satisfied with it.

[@kalpitmoliya]

Bro I am addicted to your content but you are not regular on the channel 😢😢

[@mlangham179]

I love your videos, but I got a very nice ring for my 10 year anniversary and no one cares.😅

[@justincarpenter8866]

This company doesn't care about their customers. I have had possibly the worst experience that I have ever had with any company in my lifetime. I received my ring and it looked like it was made by a child. The craftsmen are outsourced, and obviously don't care about their work or product. I sent my custom ring back and have been waiting another 2 months for the replacement. Every time I even try to talk to "customer service" I am met with BS emails and lies. I've been told that my replacement would ship out "next week" like four weeks in a row now.

[@kcatcher9590]

If I could give less than one star I would. I ordered an engagement ring on 11/29 and it is now 2/28. I still have nothing to show for the hundreds of dollars I spent. I contacted the company and was lied to on two separate occasions. Their commercials state if you are ordering for a special date to contact them which I did. I was provided a tracking number that shows a status of missent and I had to contact them once again where I was finally provided a working tracking number only to find out it was sent after I requested a refund so I could go somewhere else. Patrick Adair ruined my proposal and doesn't care in the least. Rebekah is the worst customer service agent I have ever dealt with. Whatever you do not purchase from Patrick Adair unless you want to be mislead.

[@alexzhu1428]

First!

[@PatrickAdairDesigns]

Reported

[@asbestosfibers1325]

here lies the man that single handedly ruined the waterjet channel. fun.