Making Polymer Clay Cutters With Fusion 360 - Lesson 1- The Basics (Cookie Cutters)

Welcome to lesson 1. This is where we explore the basics of polymer clay cutter (or cookie cutter) making and design with Fusion 360. We will go through the basics of creating a simple circle cutter and the different ways.
We will explore the sketch tool, offset, extrude x2, thicken and more.
Let me know what else you would like to see.
I would love to know what else you want to learn about Fusion 360/clay cutter design. Feel free to look at my designs in my cults3d shop below to let me know if there are any you would like me to recreate.
If you would like to visit what clay/cookie cutter stls I have for sale, you can find them here: cults3d.com/en...
Patreon for 2 free stls: www.patreon.co...
If you wish to support my channel and tutorials in a monetary manner then you can do so here: ko-fi.com/utte...

[@Color21-ze7fy]

Que maravilla haber encontrado tu tutorial. Gracias

[@TheKela77]

Such a well explained way to get designing with! We own a 3D printer and I have been wanting to design my own clay cutters to print but didn't know where to start. Thank you for posting this vid and I'll keep watching this series :)

[@ClayCutterTutorials]

oh thank you so much!

[@katiescherhaufer2526]

this is so clear and easy. thanks!

[@ClayCutterTutorials]

Glad it was helpful! X thank you!

[@sophiejiang3170]

Thank you so much for sharing!

[@ClayCutterTutorials]

You are so welcome! Thank you for watching x

[@KyleenSmith]

Love your videos!

[@ClayCutterTutorials]

Thank you so much, really appreciated!

[@ancaheghes8755]

Could you show us how to render and animate the cutter for a proffesional look ? Even if I basicaly know how, my pictures and videos are so so lame. Thank you !

[@martinanavarra3982]

Love Love love your videos!! so clear and useful!! Once you make the design, what do you have to do to pass it to the printer? can you maybe do a video with a full process? thanks!!

[@TheResinandCraftSpectrum]

With the saved .stl file, you have to open it in a slicer program, there are several available, my preference is Cura.This program then slices the files into g-code which is what the 3d printer needs to print it. This g-code file is then saved to an SD card, this then goes into the printer and you print that file. Slicer software can look initidimating as there are a lot of settings that control your printer but there are loads of videos available to help with understanding what these settings do, plus in cura if you hover over the setting it pops up a window that explains what that setting does x

[@ClayCutterTutorials]

Thats an amazing explanation, thank you @TheResinandCraftSpectrum I will also try to do a video as well for you as well @martinanavarra3982 Apologies for my youtube absence, I will be uploading a new video in the next 24 hours and also collecting comments on what you guys would like for future videos.

[@AYM-cz7ev]

ORNATE TILE 1 & 2 or flower 24 whould be awesome to learn ^^

[@ClayCutterTutorials]

Fab! I will look to recreate some of these in a few lessons time! Next lesson next week will be a donut cutter where we will be doing some skills crucial to imprint cutters so will be a step towards them!

[@AnineBarnard-xe3rd]

I need help please,I get everything right,but when I import file to cura it do3snt lay flat,what can i do o

[@missparadise879]

Turn off autolay or whatever your slicer calls it.

[@yazminrodriguez9312]

Good Morning Beautiful! What is the difference between using Surface and Extrude? Thank you!

[@ClayCutterTutorials]

Hello darling! I will do a little mini video on it within the next week if that sounds good to you?

[@greetjemeubis1102]

Is that the free version of fusion? Because I don't want to pay so much money to it 😢. Thxxx for answering and your lovely explanation 😊

[@ClayCutterTutorials]

fusion 360 is expensive but they will often offer discounts on membership over the year and also you can look into applying for a start up licence, if successful they will grant you a free year of full fusion 360 that you can renew on application 2 more times to have upto max 3 years free if successful.

[@greetjemeubis1102]

@@ClayCutterTutorials o okey! Keep that in mind! Thx a lot! ❤

[@AYM-cz7ev]

Hi! Could you show us how to creat bead rollers and texture rollers please? :)

[@ClayCutterTutorials]

Of course, they will be more of the advanced tutorials but i will add them to my lesson plan list!

[@ClayCutterTutorials]

texture roller lesson is up now!