Making Ring from 100 Year Old Wrought Iron!

See the full video, "Forging a Wedding Ring from 114 Year Old Wrought Iron," here: • Forging a Wedding Ring... which was published on July 10, 2020.
Join this channel to get access to perks:
/ @christcenteredironworks
--------------------------------------------------------------
Want more Christ Centered Ironworks?
--------------------------------------------------------------
Want to SUPPORT what we do here at Christ Centered Ironworks Blacksmith Channel?
Visit my channel: / christcenteredironworks
Stop by my website: www.blacksmithpdfs.com
Get some merch: teespring.com/stores/christ-c...
Shop my Amazon Influencer page for shop tools: www.amazon.com/shop/christcen...
Social: / christcenteredironworks

[@corncobjohnsonreal]

Wow that might be the youngest iron in the solar system

[@ChristCenteredIronworks]

Duh dunt tisk! Lol it's from a bridge that was constructed 100+years ago in 1906 🙂

[@steamhelsing9440]

i thought the same lol

[@lizziejohnson5084]

It does say wrought iron, implying it was modified in some way 100 years ago. But I have no idea of that is rare or not.

[@ZOCCOK]

The joke flew over everyone's head 🗿

[@ZOCCOK]

​@@steamhelsing9440 except you, you are cool

[@karlish8799]

Nice. Iron rings grant you +4 melee damage.

[@ChristCenteredIronworks]

Don't forget +2 attack damage

[@thefknguy12766]

Also its rare but sometimes it will also have a damage negation of -2.5, its a pretty good ring for early game or fist only runs but even then it holds its weight pretty good in mid to late game

[@hakdinislam6951]

+7 iron ring

[@lorenfoster4010]

Wow, that's cool! My wife has some wagon wheel rims from her familys' ranch. Her great grandpa homesteaded in Wyoming in 1911....ideas.! Cool!!

[@DeeDee-bm9hr]

You going to destroy a family heirloom to make a shitty ring?

[@eccentricjoe8786]

@@DeeDee-bm9hr Damn that’s a pretty negative way to look at it lol, it’s not like it has much of a use utility wise as a wheel, to be fair it loses some of it’s inherent meaning and history but still it’s better than getting rid of it if you don’t have the space or it just sitting in your garage or storage or something. As a ring it might be more included in a person’s or family’s life and gain more sentimental value/provoke more day-to-day thought than just sitting around. An exception would maybe be if it was a literal heirloom that’s hung up in a home maybe.

[@NintenDub]

​@@eccentricjoe8786 you have a brain...unlike most. Yea the ring would be a way more useful thing to pass on that a wheel. Knowing it's from the old family farm, and great gram and gram and mom wore this thing and it's 200+ years old is way cooler than a wheel

[@poopman3913]

1911 as in Colt m1911?

[@lorenfoster4010]

@@poopman3913 the year

[@wereboarder2009]

Thats got to be one of the thicccest rings I've ever seen.

[@emilwestgaardhenriksen1715]

I carry two hand forged iron rings with the futhark runes for my parents first names, absolutely love them and appreciate them more than any silver or gold ring I have ever owned😊

[@eccentricjoe8786]

Damn I’d take that over most gemstones/precious metals, it has more value to me being made of something with historical use as a material for tools and infrastructure than something artificially given meaning like diamonds.

[@user-rp1iy3df5t]

Зачем нужно было перекручивать прут в начале?

[@rzrzb4104]

Looked pretty darn good, the next one you do. Leave the outside as is, rough

[@ChristCenteredIronworks]

Might be a option

[@JUNIsLuke]

Another one would be really cool if you left the spin on the outside aswell instead of going for the “dotted” look

[@TheObliviousF]

Exactly what I was thinking

[@xmuggsyx]

I agree it would just be difficult for him to get it oerfectly centric when drilling

[@alexdarcydestsimon3767]

😊 That's what i was about to say. I've been here a little late i guess.

[@hoperoesler]

What I came to say.

[@blddemn6645]

Why is this so satisfying to watch, just the process that it starts from a metal rod into a ring

[@evgeniypisarev8648]

Рассверли сначала на 20 потом наружку сделай и после отрежь

[@lisocampos8080]

Now that's gonna rust

[@pavan__226]

Exactly what i was thinking

[@user-hn9vg3yi6e]

Смысл тогда было закручивать металл, если весь рисунок структуры металла не виден за внешним дизайном.

[@vakula34]

Не ищи смысл там, где его нет...

[@user-ce9gj6cw6u]

Ринат👍

[@YagrumBagarn]

"My precious..."

[@blucifer4865]

In the land of KZbin in the fires of Mt. Whitney, the Bright Lord Christ centered forged in secret a master ring to control all others! And into the ring, he poured his courage, his prowess, and his will to dominate the KZbin algorithm! One ring to view them all!

[@ChristCenteredIronworks]

Top comment right here lol

[@ChristCenteredIronworks]

Top comment right here lol

[@user-ey9qp3yo5x]

Кроме результата вообще всё по красоте))

[@user-th6yn6jl7b]

Вот нафига сверлить только надо было? Кузня есть - можно было и пробойником просадить Чтоб вообще классически всё!

[@willsum409]

Very awesome. I like the mix of modern and classical forging techniques

[@jadat.j.7031]

And so the ring was forged! In the fires of Mordor, a ring to rule them all.

[@eli-barrrunforge5823]

Good looking piece!

[@ChristCenteredIronworks]

Thanks Eli

[@bobbarrett7760]

@@ChristCenteredIronworks P

[@supernerd2333]

Sauron in Mount Doom:

[@nikhildahiya1962]

One RING to rule them all !!

[@theriversexperience9383]

Next time paint the inside of the ring and then etch it for 10 hours. The paint will keep the inside smooth and the acid will expose all the grain from the wrought iron. I bet it would look awesome.

[@vincentgolden5352]

beautiful Work Roy

[@MinionsSmithy]

That looks sick! I love it!

[@TAS1303]

I challenge you to make it out of 1 year old wrought iron. That will be orders of magnitude more difficult!🤣

[@ChristCenteredIronworks]

Lol sure nooooo problem

[@seansteele1269]

It always kinda sucks no matter how old it is

[@user-rp1iy3df5t]

Почему английские тексты здесь не переводятся!?

[@user-fg2wo8uy4d]

ну, это чтобы была возможность практиковать английский.

[@EternalShadow1667]

Weird the Russian (right..?) is translated just fine by Google Tranlsate

[@EternalShadow1667]

Weird the Russian (right..?) is translated just fine by Google Tranlsate

[@pornhub1]

Now think about it, that iron is basically clean from most radioactive materials

[@joepringle3695]

Do you understand how radiation works?

[@keegenm.6154]

​@@joepringle3695 do you understand how prenuclear metal comes from a time when ambient radiation levels were lower so they were exposed to less radiation during processing?

[@eugenecole652]

I want one just like it

[@LookingGlass69]

To ward off fairies

[@alexc8114]

Iron forged before 1945 is actually really valuable for scientific instruments as it doesn't have radiation from the air mixed in like modern iron does.

[@eduardt7191]

Большая часть заготовки ушла в стружку, легче было из металлической полоски сделать это кольцо от которого будет болеть палец 😂

[@user-gp5fv8pp5z]

Одно дерево - одна спичка😁

[@user-fg2wo8uy4d]

как приятно, что существуют люди, которые пишут такие комментарии! а зачем он сначала делал тордировку, а потом шлифовал? А ещё забавно, что на шлифованной поверхности потом выбивается имитация ковки...

[@user-gp5fv8pp5z]

@@user-fg2wo8uy4d тордировка это что такое?

[@amardave84]

The one ring to rule them all!

[@destinyc6494]

For a black smith to use the punch is amazing

[@NicleT]

May I ask why twisting the rod at the beginning? Is it for more durability?

[@timreid9556]

Have you considered a hole saw bit, like from a Magnetic drill? you might be able to forge a band from the plug

[@Menuki]

Exer consider annular cutter to hog out big holes?

[@joshmajor8662]

Come on Roy, you gotta etch it!!! Lol

[@firstgentrucking207]

Everyone with a lathe is probably cringing right now 😆 good thing I'm not a guy with a lathe, looks good! 👍

[@patman0250]

Why would they be cringing?

[@firstgentrucking207]

@@patman0250 just use your imagination a little, and think what a lathe is used for.

[@CumSmuggler]

@@firstgentrucking207 imagine gatekeeping from someone who might not know, by acting like a toddler. I’d check yourself, make sure you didn’t shit your diaper.

[@billabong9215]

​@@firstgentrucking207 I think what's cringier is he twisted the bar no reason and then ground it down. He could have forged the entire piece.

[@akaroth7542]

Wiggling drill triggered me. Same w the lack of spotting

[@kalasm8136]

Finally I can make it through Blighttown

[@Lightbringer-fs4mn]

Mordor'da Hüküm Dağının Ateşlerinde dövülmediyse kullanmam.

[@key2theuniverse713]

Nothing screams I love you like an old exhaust pipe

[@infamoushacker4chan883]

You'll want to bevel (and probably polish) the inside edges, lest the sharp 90° edges cut into your finger.

[@crozal-zf2vx]

Bonjour Belle réalisation j'adore😊 Pourriez vous expliquer l'utilité de chauffer et ensuite de torsadée métal ?

[@RustyEmpire-gc7ex]

I love it! But what was that thing you used to mark a hole for the drill press?

[@victorjun2421]

That's a strong ring

[@zakizamani542]

Maybe you can also show how was iron work done back in few centuries..with no drilling tools or whatsoever

[@clown134]

you should make it to where it glows red all the time

[@MECHA-TED]

Bros bout to set on a quest from shire to shelob

[@claudiocarbone2225]

Great work

[@ChristCenteredIronworks]

Thank you

[@williamvanniekerk5608]

Very well done😌✌🏻🔥

[@GamingwithShadowlink]

I hope this isn't rude of me to ask but what was the point of the twist? Cuz if you're doing something with My patterned Damascus the twist would have added a nice cool effect to the ring but with just but without any other metals or an asset edge that wouldn't come out.

[@ChristCenteredIronworks]

The twist isn't aesthetic.. it's because wrought iron has a wood grain structure and will split open when upsetting on the end grain like in this video. The twist is to align the grain structure so that it doesn't split when upset

[@TheSpeep]

Looks nice, but you wear that for a day and youll have a literal hand full of rust. Had the same problem with some of my own creations.

[@MaximilianonMars]

Maybe it can be coated with another metal? I saw someone heat metal and brush with brass and the brass was left behind.

[@christopherjones7191]

​@@MaximilianonMars defeats the whole point of making it out of wrought iron. Though perhaps a clear enamel would work well

[@stevetrombley1078]

My precious 😂

[@jvoz671]

You made the Dark Souls players happy making a "Rustic" Iron Ring.

[@SW-ii5gg]

Rustic ring around the finger.

[@henningeide8355]

Do you take custom orders? :) Would love some genuine wrought iron jewlery. For myself and maybe gifts.

[@LilRobeyy]

What was the point of turning the pipe if you were going to sand it down anyway? Also it looks really cool

[@nercolord3512]

that's cool and all but does it rule them all?

[@ketnersteven]

Awesome

[@monotheis6889]

My great grandfather had a wroght iron shop in Germany, before coming to America to set up in Colorado. True wroght iron real hard to find unless stolen or you make it yourself.

[@RedDogForge]

depends heavily on location. the eastern states, especialy North eastern are awash in it.

[@arxclaus]

Why he twisted the rod?

[@fancyincubus]

Took me back to when we'd make quarters and silver dollars into rings

[@cask1]

Very cool

[@Excelsiur1]

Hobbyist smith here, for my education what made you choose to drill out the center of the ring instead of using a punch through the center?

[@exelierxe.e]

Now, You are a Templar You know, that ring when flat, (without tiny lows) looked better

[@seansteele1269]

Are you going to seal it somehow? So it doesn’t rust, I’ve had that problem with my Damascus rings.

[@Tom-hz9oc]

Have you tried bluing them?

[@koen_bakker]

Linseed oil is a really good rust stopper. If you smear it onto the metal with a paper towel and let it dry for a few days, the oil will make a sort of clear coat on the metal that stops the rust.

[@jakemakes7627]

How did you seal it so it wouldn’t rust on contact with skin? I recently made a wrought ring and beeswax doesn’t seem to last

[@pattes123]

There is no point twisting it and etching it if your just gonna do a hammer finish... defeats the purpose of wrought iron completely. Good job buddy 👏

[@ChristCenteredIronworks]

The twist is for alignment of the grain structure to prevent splitting.... the vinegar was to remove scale.

[@pattes123]

@Christ Centered Ironworks should have just used cold rolled then. That's a waste at this point....

[@ChristCenteredIronworks]

It was a customer request...

[@vadloorimamatha2017]

Super

[@_FinnG]

Кольцо из дамаска пробивается пробойником и вытягивается. А это колхоз какой-то.

[@alexirbis5747]

Услышал где то про Дамаск и козыряешь этим,запомни,каждый как хочет так и drочит🤷‍♂️👌

[@_FinnG]

@@alexirbis5747 обязательно запомню, как будто откровение снизошло сверху. И детям накажу, пусть знают.

[@szia9694]

omg! that's so sic!! amazing!!!!

[@UnpaiD_Landlord_00]

Is twisting for patterns or other purpose? I didn't see the patterns🤔

[@christophercarroll1977]

Was it completely necessary to presoak in vinegar?

[@mpalaskokkalis2593]

Perfect

[@wiley979]

Does the inside need to be sealed with anything?

[@westrice6539]

id probably seal it with some bees wax to keep it from rusting or another sealant of choice that's just my personal go to

[@jameshoffman1842]

Good idea to slow/stop rusting...

[@westrice6539]

@@jameshoffman1842 yea it lasts a long time too even when washing its also safe for food if u coat a knife with it

[@Agent_Matt_6]

TIL cleaning vinegar exists (I’m use to seeing my dad use the cooking vinegar for cleaning)

[@pooopopo7300]

my precious

[@incensedmars873]

nice anillo bro

[@alexdarcydestsimon3767]

Can you make a ring out an octogonal barrell ?

[@lndsyg]

lol reminds me of Mr krabs first penny 🤣

[@BanilyaGorilya]

Wait so does the age make a difference to the chemical composition of the iron you use to make the ring? Otherwise you’re dooming a soon to be wed couple.

[@jesusgomez2006]

Es mucho trabajo para hacer un anillo sin valor alguno. Mas que personal, no todos tenemos al alcance tanta herramienta, yo pienso que teniendo al alcance tanta herramienta haría cosas mejores que un simple anillo.

[@scott699]

Is the vinegar used for etching?

[@KrZy_KonnxX]

Back in my day we called that a utf or coin

[@sadhanadansena4389]

I think this iron rod should be in a miusium 🤔😅 who all agree

[@anonymousstout4759]

When this thing rust it give the wearer +100% movement speed in unstable ground, like a poisonous swamp infested with big bugs for example

[@devilishere6538]

why my hand so heavy 😃

[@ingleberthumperdink9455]

That’s a nice beginner’s project for children

[@sxedarkangel8720]

you lost br when you didn't forge the hole 😂😂

[@thesweetestjerk8905]

Thought you were going to etch it since you twisted it

[@josephmedina6403]

What’s a hundred years to a mineral that’s millions of years old 🤣

[@user-tj8zo9kc2t]

Зачем ковать и скручивать так, не понимаю. Обычное кольцо.

[@lucaslopes3123]

You didn't, put the ring on the finger? Oh man, you is a bad boy 😭

[@jacobwilson2404]

Almost all iron has been around for billions of years

[@bochapman1058]

So what was the point in the initial twist?

[@Gnefitisis]

What was the purpose of the acetic acid?

[@guru414]

And we are drinking 1 billion years formed H²O (water)

[@mythdweller]

I'd rather thin out the rod, then lunchy and drift and save a good three rings worth of that wrought goodness for later. Still beautiful.

[@BubupatianD]

Proses yang begitu panjang 👍

[@AlexandrBorschchev]

"100 year old iron" yeah look at my 20 days old manufactured dasani water bottle

[@chickencurry7642]

Over 100 yrs old and barely rusted. Today's iron rod (of similar dimensions) would catch rust in days and if left to face the elements, would disintegrate in about a year or two...

[@huntereakright8988]

iron is an element all by itself how are the properties any different now from then

[@huntereakright8988]

theY dOnt maKe that aRN likE tHeY usEd tO