Рет қаралды 4,341
Fall Crafts Time-Lapse How to make easy scrap, pallet, split wood primitive rustic pumpkin, primitive rustic Candy Corn Inspired Wine Bottle, primitive rustic Scarecrow, and Cinderella Pumpkin all made with supplies/scraps I already had. I purchased spray paint and a few extra Furring Strips.
All crafts were meant to be primitive/rustic style so no sanding was done. You can refine them more if you would like a neater appearance.
Large Pumpkin
Make sure all your angled cuts are in the correct direction (all projects).
(4) boards - 23 1/2" (the two centerboards have a 22.5-degree angle cut at top/2 outer (center) have a 15-degree cut)
(2) boards - 21" (15 degree cut at top/45 degree cut at bottom)
Split wood stump - 6-3/4"
Back supports should be the width of all boards on all projects.
Orange and green spray paint/wire/raffia/stick stars/Dark brown stain
Cinderella Pumpkin
(1) 17-1/2" - Center Board (top edges nipped off at the points
(2) boards - 15-1/2" (all outside edges nipped off at points)
Stump (split wood) - 4"
Cream & Brown Paint/raffia/Ivy/Wire for curling
Wine Bottle
3 split logs (2 short/1 long),
23" high at center, Shorter sides 15-1/2", width at widest point 7-1/2"
Ivy/cream & orange paint/raffia/acorn/pinecone
Scarecrow
Scarecrows Head
(2) 23-1/2" Furring
(2) 19 3/4" Furring
(1) 21 3/4" Furring
(1) 21" Furring
(2) 8-3/4" back supports
(1) 14 1/2" Hat Brim
Nose 4"h x 1-3/4" w (scrap used from nipped edges of pumpkins)
(1) 76" Furring for stand
2 buttons/scrap fabric/hay/raffia/sharpie -black
Outdoor use glue and nails or screws needed for all projects.
Finish with a matte spray to protect paint.
Measurements are approximate and will depend on scrap wood used.