Making semi-auto PCP Valve for Regulated PCP | Part 1

In this video I will make a pneumatic valve for my soon to be completed regulated PCP. This operates at max. 3500 PSI, and uses a 1800 PSI output regulator, which you can buy in one of the links down below. I used aluminium to make the hammer chamber, valve, drop block connector, etc... The drop block I used was a scrap part I had left over from a year ago, so it finally got into some good use. Next part will feature making the hammer which will show the pneumatic recovery system.
!! Keep in mind that this is just part 1 and I didn't finish the rapid system yet, so stay tuned for part 2!
LATHE used in the video:
MINI Lathe 7x16 800W (Europe and USA link): s.click.aliexpress.com/e/_DlY...
Asia link: s.click.aliexpress.com/e/_Dlt...
1800 PSI PCP regulator: s.click.aliexpress.com/e/_DBF... (Make sure you select the right thread as there are 2 options)
0.3L PCP tank: s.click.aliexpress.com/e/_Dl2...

[@SuperFirewords]

Good job bro I followed you since your last project and you are awesome.i have been working on an air regulator project for your last project to improve accuracy and stability shooting if you are interested I can send you the design to make it. Thanks for your great videos good luck and keep going

[@pcpairgunschannel]

Thanks! That's interesting, maybe I could check it out.

[@suwahyo1492]

ini yg saya tunggu bro,sistem semi auto blowback chamber,di tunggu tes akurasi dan velocity nya bro

[@robertsimpson6324]

Thanks mate were looking at the different systems last week.

[@pcpairgunschannel]

Next video soon 👍

[@f804.de.ruyter]

Thank you man, also u are very skilled.

[@pcpairgunschannel]

👍👍

[@benoitdudzik8010]

tanks for this video !!!

[@Mikko74]

Super thanks, you sold me on that lathe.

[@pcpairgunschannel]

feel free to ask any questions if you have any!

[@adityasalunkhe1288]

Best pcp job 😎

[@pcpairgunschannel]

Glad you think so!

[@user-yz3bc9ok9l]

非常好👍

[@nirdoshbara3618]

I watch ur all videos carefully

[@pcpairgunschannel]

Hope you enjoy!👍

[@CyberHunter512]

Dengan alat pekerjaan jadi lebih mudah dan cepat 👍terimakasih ilmunya sir..🙏👍👍♥️

[@pcpairgunschannel]

Terimakasih 👍👍

[@user-xs3fx7ln9c]

请教，你的恒压减压阀的阀针是一直被顶住了吗？相当于把气室向前移动了。是吗

[@Brianbri-nq3cc]

Simply OUTSTANDING!!👍👍👍👍👍👍

[@claudiopcp9704]

Bem que vc poderia passar as medidas dos rasgos também

[@airsight2753]

There's a a vent hole at the back of the valve that automatically cocks the hammer is that correct? My unreg pcp went full auto when the o-ring broke 😂.

[@pcpairgunschannel]

Correct! I actually had the same issue many times. This one would be full auto too, but theres a difference in the trigger, and the air flow is much more limited. (2.5mm was too much so I sealed that hole and made a new one) Btw do you have any message platform as I tend to have a lot of questions for you often 😅 So it would be nice to chat with you about PCP topics via messaging rather than commenting.

[@airsight2753]

@@pcpairgunschannel do you have fb messenger?

[@airsight2753]

@@pcpairgunschannel do u have fb mssngr?

[@airsight2753]

@@pcpairgunschannel do u have fb mssngr?

[@airsight2753]

Do you have fb mssngr?

[@user-ji9zy5rr7s]

💞💞🙌🙌

[@TheEdguitars]

Hi, question, is delrin alone sealing the air?

[@pcpairgunschannel]

Yes, from the valve. some parts had o rings as you saw but i think you meant is the delrin used as the valve seat alone, yes.

[@vqamorronstraktor8623]

Om buat mouser od 28 magazine bisa ga?

[@pcpairgunschannel]

Saya akan membuat model mouser od 32 nanti.

[@prototype9030]

Nex afc sir

[@pcpairgunschannel]

Good idea, lets see Bro

[@AirgunHuntingph]

🤗🤗🤝🤝🥰🥰😋😋

[@greggorio6259]

Bro. Did you sale your pcp made? I realy like bro.

[@pcpairgunschannel]

No but if I can find a courier maybe I will

[@greggorio6259]

What is your country bro?

[@greggorio6259]

What is your country bro?

[@greggorio6259]

Ohh. Sad😢😢😢

[@pcpairgunschannel]

@@greggorio6259 what do you think is a fair price for a tactical style semi auto? I thought I could design a higher quality PCP with an adjustable stock and if I get couriers maybe I could ship worldwide.

[@user-wk5td9oz3h]

di jual gak bang

[@pcpairgunschannel]

Maaf bro, di negara saya kurir tidak mau mengirim senapan angin. Saya akan coba cari tahu.

[@DaninakhunterS]

Usahakan bang..saya juga mau,buat paser​@@pcpairgunschannel

[@pcpairgunschannel]

@@DaninakhunterS Jika saya mendapatkan kurir yang menerima pengiriman produk saya, saya akan membuat video pengumuman

[@DaninakhunterS]

@@pcpairgunschannel 👍👍👍