Making The Pattern For The Ranalah Frame! | Reviving History (Episode #6)

[@thomaspollock4274]

The talent of the craftsmen involved in this project is amazing. Their passion for their craft is evident.

[@The_Silversurfer]

From someone who spent years making jigs and fixture these guys are such experts. Pattern makers are the master craftsman and what a workshop! Great to see the knowledge being passed on. Mike you are a star!

[@ianosprey7666]

My great grandad was an iron moulder. My grandad was an iron moulder. My dad (B 1929) was a master Joiner. He was in awe of pattern makers and tool makers. It's ridiculous how this service industry Britain demeans the engineering talent it was built on

[@peterhofmann8292]

I am glad that Wendy got her good byes in there. This is all so fascinating to me, thanks Dom I really appreciate the work you are putting into this.

[@bobcooke6346]

Great to see these skills being passed along, even better when it’s within the family, Mike must be very proud of his son’s.

[@lesjbennett61]

Watching the patternmakers brings it all back

[@weaton25]

That was very interesting my Dad was a pattern maker he died when I was about 10 years old he was only about 40 years old struck down with Cancer there was not much that they could do for you in those days. That was way back in the mid 1950s I am now 76 it was nice to see the kind of thing that he would have been making working in a big Engineering factory .

[@leslieaustin151]

That metal looked to me like ‘white metal’ (Babbitt). Used to make bearings in old lathes, engines, etc. Les

[@kurbelweller1343]

I'd agree there

[@paulp96275]

Craftsmanship being passed down an art that is continuing fanbloodytastic thanks Dom👍👨🏻‍🏭

[@brucewrandol]

It is interesting 🧐 to hear you talk to the pattern makers. You know what you want plus you know the questions to ask. Then they know how to answer you in terms that you understand. Plus, I can understand what the goal is. Very interesting.

[@MikeSmith-sg9pt]

So much skill in that workshop! The power of blokes in sheds!

[@TheGreaseySpoon]

There are many guys in sheds all over the UK keeping the old skills alive and its good to see that the skills are still being passed down the generations.

[@manfromthepru]

What a most interesting visit. Your excitement is obvious.

[@WesB1972]

Absolutely beautiful craftsmanship, BRAVO to these men.

[@luciascalisi7172]

Potent mix of quiet enthusiasm & exquisite experience - tremendous!

[@paulwills9742]

When I left school in the late 70s I was lucky enough to choose 1 of 3 apprenticeships. A pattern maker ,engineering in the Royal Navy or a cabinet maker for a shop fitting company. The Pattern Maker meant I had to stay in a dormitory a long way from home for a 4 year apprenticeship. I went for the last and loved French Polishing, my boss used to polish TV cabinets for GEC.

[@llapmsp]

Awesome to see these old world skills surviving today. Thanks so much for sharing. Can't wait to see the casting process.

[@bloodknottrevelian3396]

Watching with great interest. Dad was a non-ferrous moulder and I often used to visit the foundry which had it’s own small pattern shop.

[@DominicChineas]

Glad you’ve enjoyed it! Thank you for watching

[@josephlovell6951]

Was going to tell you it's babbitt but I see someone already did it . This has really been a grate series. I can feel your excitement and passion. As a hobby machinist I to in joy bring back to life old things. Grate job.

[@malcolmalexander3184]

Great to see you still hard at work Mick. Always the master craftsman which is something to be so proud of. Good to see the boys. Must catch up sometime.

[@bobingram6912]

That was a master class in the art of traditional workmanship, the unsung heroes working in their sheds.. Thanks Dom, learnt a lot from that👍🏻❤

[@joeetheridge1471]

Beautiful pattern, I could watch and listen to these masters of there craft all day.

[@davidhayward5207]

What a beautiful, heart warming film. Long may these skills continue..

[@russellnixon9981]

It never ceases to amaze me what great things come from the shed / small workshops at the end of the garden.

[@smartgorilla]

It's very similar to what they do in Japan in the mini workshops

[@russellnixon9981]

@@smartgorilla Thanks for your reply. I'v had the pleasure of meeting some brilliant crafts men and women working from a sheds at the bottom of the garden. Essex has some amazing people. Looking forward to the next instalment.

[@joannaraphael4459]

So good to see the old skills being passed down the generations. Very rare now. Another great video

[@mwicks1968]

Amazing to see these traditional skills are still alive and well - well done Dom! 👏👏👏

[@chrisgunn121]

Amazing wonderful skilful People!!! Thank you Dom for being an ambassador for the ancient arts and crafts, Top Man!

[@sethduval8644]

Dom, so good to hear a proper Norfolk accent👍👍👍👍

[@keithdavis4877]

Thank you for a letting us see a true genuine at work

[@martinstreader3328]

Hello Dom. Really enjoying the videos. I'm a member of a model engineering club that runs a miniature railway. We started watching the Ranalah series at one of our club evenings and are now totally gripped. Your enthusiasm Really shines through. The technical detail is so well explained. We will definitely watch this all the way through. Many thanks for sharing your work.

[@andrewforrester4579]

Wood working at its best a thing of beauty

[@craigd6261]

The only word for that patern is Beautiful. Real craftsmanship.

[@GARDENER42]

Absolutely fascinating to see this - truly old school pattern making & very educational.

[@threeriversforge1997]

I'm surprised that you didn't recognize Babbit bearing material. All the old stuff you routinely work on, and the fact that you're restoring a vintage machine.... seems kind of logical to me. Babbit material is a lead alloy and still in use today around the world because it's better than roller bearings for a lot of applications. Not the easiest thing to pour in your application, I don't think, but not impossible, that's for sure. It's really great to see you bringing back a bit of English history like you are. So much was lost over the last hundred years.

[@violentblue123]

I love the old world craftsmanship like this, analog to the core.

[@turgworks4138]

My uncle was a pattern maker, it's brilliant to see the process.

[@davidlong3824]

It’s coming on nicely like the video.

[@Mikeyt171163]

I used to work for company that made the Burnco pattern paint. I was an R&D chemist there for 35 years. So cool to see this!

[@seekersofrhythm]

I haven't been following your KZbin channel for a while because of health issues but I have been catching up. You mentioned that you where concerned about advertising on your channel. 2 things, first it has to be something that you would genuinely be interested in. Second you have to add time for product promotion and not take time from your video. That being said I have no problem accepting that you need to make the best content you can and it has a cost attached. One of the things that impresses me most is that you never use your celebratey to get subscribers to the channel. I love the emotion you have for the projects you work on, it is inspiring. Stay safe J.

[@adieaf61]

Once again a wonderful video. The journey is fascinating. Thanks Dom.

[@peterphilpot8942]

Keith Rucker of Vintage Machinery does a lot of casting videos and repairs to Babbit bearings where what he calls babbit material is removed before being restored. A very good source for what you may need to advance the project. Good luck.

[@The1queencollector]

I concur, his last video was showing how to redo those Babbit bearings in that vintage sugar cane crusher.

[@juz4kix]

That was my first thought. Keith has taught me a ton.

[@billhanson4921]

@@juz4kix babbit is known as white metal in the UK, its a mixture of lead and tin i think

[@charliekingpine3893]

It looks very very good to me, can't wait for the next step

[@brianmicky7596]

Hi Dom, Fantastic, could feel the excitement, yes can't wait for the cast, ( not many old trades Left,) All the Best Brian 🤗😎

[@ian_morg]

Pure craftsmanship! Brilliant that the sons are working with him to carry on the craft.

[@wincoop72]

Hi Dom, you was saying that the casting needs to be dead square, as an engineer I think you will need a jig to hold the shaft dead square whilst pouring the lead type material around the shaft so that it is dead square to the lower yoke.

[@DominicChineas]

Your right, that’s exactly how I’m going to do it, I’m working on plans for the jig now

[@rickdavila8783]

Just started watching your channel and I love your level of excitement and the fact that you want to learn everything!

[@tonystamp2708]

That was an amazing video. It was so nice to see traditional crafts being handed down from father to son(s). Thanks for posting this, Dom. I thoroughly enjoyed it. I can’t wait to see the casting video now.

[@hoperp1951]

Awesome, when I did my Foundry Technicians course back in 1969/70, in Pattern Making part, we used both Leather and Wax Fillets on the pattern, The wax was somewhat easier in that it flowed much easier around a radius than leather, no need to do any cuts or cut-outs. We were split up into small teams to do a project, our was a barbel and weights. Bar and clamps worked fine, but our cast iron weights left an awful lot to be desired being more than 50% heavier that they were supposed to be. We'd miscalculated the size and density very badly, but all part of the learning process which included firing up a small cupola, making the patterns, moulds, casting and final machining etc. Luckily we all passed the exams at the end.

[@Dug6666666]

I did my apprenticeship in Pattern making starting in 1979 and that is the first time I have seen a leather fillet applied :) though the Pattern store had plenty of old examples. Body filler took over for its versatility. We did use wax fillets however on master patterns (non production, often one use) where you had extruded wax of different sizes in a similar cross section shape to wax fillets. The same ball ended tool is used, but instead of gluing the ball is heated over a flame so that it melts the wax fillet to the timber. Not much heat is needed' it is more to stop the ball sticking to the wax. Good patterns can make a foundries job so much easier, so when a foundry recommends a Pattern maker you know you are on to a good'n. On the rare occasion I get to make a pattern these days it is with a CNC router, the important skills still apply in making a good CAD model. (draft angles, core fits)

[@oscartango64]

Getting so close. I'm very excited for you. The craftsmanship is impeccable. Can't wait for the finished product. Thanks for sharing. Otto

[@DominicChineas]

Very close now!! Few weeks away!

[@garrymatthews4430]

That is some craftmanship how amasing to know this is still being done!!!

[@scubaroo]

Thank you so much Dom for showing us yet more genuine craftsmen. It is absolutely fascinating and heartwarming watching the processes contributing to the build. As a youngster i was fortunate enough to spend a lot of time around proper old school tradesmen.... it takes me back in the blink of an eye. Keep up the good work!

[@gavinbishop2461]

Dom, Looking at the splatter I was thinking Tin so white metal is the most logical. As mentioned here it is used in plain bearings such as on steam locomotives, railway carriages and wagons. These have bronze bearing shells with the bearing surface coated in white metal which is scraped to a good fit. It can be removed and re-applied as the bearing wears. If lubrication fails it "runs hot" so the white metal melts and pours out. The bearing then has to be remetalled and the fault rectified. Suggest you talk to one of the preserved railway workshops such as South Devon Railway Engineering.

[@edfingleton9889]

Oh no! I’ve recently been recommended your channel and now I’ve accidentally got up to date with your projects. Now I have the inexorable wait for more of your content! Really love watching your videos, such interesting stuff you get to do.

[@DominicChineas]

Thanks so much! Glad you are enjoying the channel, luckily enough there is a new video today at 3pm! Hope you enjoy it!

[@daz41262010]

excellent video Dom good to see the pattern of the Ranalah frame it looks awesome :)

[@sharonclaridge]

Blown away by the skills of this workshop!

[@ianlainchbury]

Who doesn't like this? Oml this project is awesome. Thanks Dom.

[@Dudleymiddleton]

Great to see true craftmanship like this these days, practiced for over 50 years - incredible! Got to love that norfolk accent, too - real proper!

[@williamholmes9129]

He sound like what I do 👍

[@gleggett3817]

@@williamholmes9129 he do dun't he

[@billmumbo2697]

Dad was from Norfolk it was good to hear the accent again now goin Dom👍

[@chrismills980]

I used to work in the Tinsmiths department at Airbus Filton, I'm pretty sure they had at least one of these if not two, it's now GKN aerospace Filton Bristol (the home of Concorde)

[@SobieRobie]

A very ambitious project, I can't wait for the next episodes!

[@besenzon1]

Wow !!! You found the right place there. I bet you didn't want to leave. What an amazing family. The Ranalah is going to look amazing 😍

[@michaelhunt2369]

fantastic video Dom, keep them coming

[@lodgecav490]

Those Pattern Makers should be starting their own KZbin channel - they would do well.

[@bar1066]

Thank you for sharing this journey.👍👏👏👏🇬🇧

[@nicolaliddle9622]

Wow pattern making is quite the perceptual challenge, certainly a very unique skill. Great to see. It’s all moving in the right direction! And hi to Wendy!

[@CYC123]

Hello Dom The pattern for your main casting is looking so good, great video looking round the pattern making shop. Concerning the silver metal you melted out of the casting, I think it may be "Babbitt" This is the material used to make white metal bearings in the old days. From the internet I found this: The original formula for Babbitt's bearing metal was 89.3% tin, 7.1% antimony and 3.6% copper and that formula is still marketed today by some manufacturers as ASTM B-23 Grade 2 Babbitt or as "Genuine Babbitt". I think Babbitt is harder than lead so would be a good choice to bed the steel parts into the cast iron frame of the Ranalah.

[@DominicChineas]

Thank you so much for this!

[@TheKnacklersWorkshop]

Hello Dom, Super interesting episode... When I sat my entrance exam for my apprenticeship 250 places were available, the two with the highest marks normally become pattern makers... See you next week... Take care. Paul,,

[@oldtomsphotos]

I am always in awe of pure professionalism. I was fascinated in 1963 I started in a laboratory near Barnsley that made cast rolls for steel industry and had to take samples etc into the pattern shop. I was 16 so would not question why they made wooden patterns and not just make the casting from another roll. Dom explained this a few videos back.

[@markmurphy3578]

What an amazing family business. Excellent work having them working on your project.

[@debbymuir]

Genius Dom, xx

[@DanT1111]

Loving the content on the channel Dom, brilliant episode showing all the never seen work which goes into projects.

[@marieeaton-smith5168]

That is a thing of beauty Dom, very talented and skilled guys.Very interesting listening to them describe the making process. Thanks so much.

[@simonbirt6121]

Wow, what skill. Very pleased to see hand shakes again, marvellous. Wish I had room for a finished wheeling machine.

[@keithphilliskirk]

Great video today, making it look easy is part of the skill. Your metal looks like Babbit alloy. Good luck Dom.

[@lucienwilliams4359]

It's so cool the journey from the raiders of the lost ark style hunting down the rannala to this point has been so riveting to see I'd recommend anyone to see the journey so cool

[@BunnyKins1970]

The leather fillets are a revelation to me! Such a clever idea. At 18:20 - your Xmas tree is a bit bent. 💚🐇🐴💚

[@ronaldkent1971]

Fantastic job by the boys

[@jimjones7909]

I agree with 'course you can' - given the age of the wheeling machine, - white metal or Babbitt metal - there used to be ingots of 'Wheel brand' metal in our workshop when I did my apprenticeship - a hundred years ago!

[@terrytopliss9506]

Great video Dom,reminded me of my job before I retired. What the guys doing the patterns for your ranalah is exactly how you make patterns for plastic injection moulds.👍👍

[@jonno7910]

Brilliant VLOG again Dom 👍

[@newtronix]

Looking good! That leather idea, so classic. It's that sort of thing that gets lost in time and needs to be saved. Is that metal some sort of babbitt metal perhaps? (Tin based)

[@maartenpauleurelings3643]

Hi Dom, I love your idea of reviving the classic English wheel. Can you give a ballpark figure of what it would cost if I would like to buy one? Thank you! Warm regards, Maarten

[@lynnhaswell1690]

Fabulous video - so nice to see craftsmen at work and keeping it in the family 👌😊

[@DominicChineas]

They were such a talented bunch, you could just tell they loved the job!

[@patrickflanagan8008]

Outstanding.

[@davidtaysom3592]

Absolutely fascinating loved every second of it

[@TheStonelodge]

Brilliant video. Great that you were allowed film so much …so much experience under one roof , loved it

[@KendalSmithy]

Thanks, Dom, for another brilliant video. I'm wondering if your alloy was once printing type metal. That was an alloy containing lead, tin and antimony. It stayed bright and was harder than pure lead, plus it had a lower eutectic temperature and was used to produce every newspaper in the world until lithography eventually took over.

[@johnjephcote7636]

Linotype. It was very hard.

[@KendalSmithy]

@@johnjephcote7636 Yes, plus Monotype and Intertype; they were all much of a muchness, as they say. The machines that still exist are now museum pieces!

[@deandowney9316]

Another step forward. :-)

[@markrmilan]

I'm pretty sure as others have said it's a babbit bearing which is a mix of lead and tin I believe, they were used in the days before roller bearings. Keith Rucker of vintage machinery is the man to go see about that.

[@sadgit66]

How great to see the workmanship that's going into this project - thank you so much for sharing your journey

[@TheFoxUK]

Dom, there is a lead substitute used in Metal forming industry used to cast soft tooling called ‘kirksite’ or Zamak 2. It only becomes known as Kirksite when it’s gravity cast for use as a die. It was originally designed for low volume sheet metal dies. It is a Zinc, aluminium, alloy (mainly Zinc) with a bit of copper thrown in to strengthen it up. Hope this helps.

[@1974UTuber]

I had the same thought. Looks very much like a Zinc & Aluminium amalgam

[@pheadrus7621]

Costume jewelry casting used to use a similar alloy of zinc and lead.

[@johnjephcote7636]

Is that the same as one called Mazak?

[@TheFoxUK]

@@johnjephcote7636 I never heard that name as a metal but i’m not an expert. That name though is well known within the metal industry as a Machine toolmaker. They make precision CNC machines that are very popular.

[@dek123]

You were correct about carpenters/pattern makers Dominic. I left school at 15 and went to work in a pattern shop, it soon became obvious to me that I hadn’t got the necessary skills to do that job.

[@DominicChineas]

They are a clever bunch!

[@Lifesgood427]

What fantastic craftmanship, fascinating Dom, really enjoying this series,

[@digitaIgorilla]

Wow East Coast Casting! Alec Steele was also there just a few days ago!! And during his video I was convinced I'd seen your Ranelagh casting in the back of shot! Small world ❤ Also Babbitt? Sounds like the name for bearing surfaces material I've seen cast on steam engine videos (from US of course). 😉

[@markfergerson2145]

No, Alec was at *West* Coast Casting. I'd heard that Dom had gone there bu no details. Might want to read the comments on that Alec Steele video.

[@DominicChineas]

Yes indeed that was my ranalah body at the foundry! Babbitt is looking popular, I’m waiting to hear the results, I should know soon

[@busterboy7505]

Brilliant and really interesting video Dom, can’t wait for the casting, 👍👍.

[@johng7rwf419]

I learnt a lot there. Many thanks, J

[@moonstarer55]

Very interesting stuff there Dom. The wooden Ranalah is a work of art. They made a cracking job of it. Keep up the good work.

[@stevedane787]

Really satisfying video to watch. The skill levels involved are way above my abilities. Its also brilliant to see that the skills have been passed on to the next generation. Can't wait for the casting video.

[@brendawilliams700]

Fascinating video Dom. How wonderful to see skills handed down between father and sons. Good luck with the rest of the project 👍