MAKING THE TYPHON 6S GO FAST!!!! GEARING AND TIRES.

[@tonysmith7989]

ProTek RC 35x35x10mm Aluminum High Speed HV Cooling Fan is the fan I have on the motor heat sink and it fist perfect and put out plenty of air. They fit the motor and ESC. So I bought more for the Outcast, Kraton and Fireteam as a backup if the Arrma one goes out or when summer comes around. And lifting the rear posts helps a lot for that purpose and also battery clearance.

[@xXB.FunkXx]

I've been trying to keep my tires on my Typhon TLR and tires after tires they have blown off and even with factory glued and an obscene amount of glue smeared on (I was beyond caring for appearance) and still 3-4 seconds 💥BLAP! Tire rips, tears, or comes completely off and rolls away. I'm new to all of this so I'd never heard of belted tire's for RC and my local shop said nothing about it ($$sold more tire's $$). Anyway solved my problem, belted Hoons = tire's on Vroom's🤯🖐️💥🎤

[@BarstoneRC]

Yeah the tires I tried where trash. The hoons are awesome

[@tonysmith7989]

Took the earplugs out thinking they were better for bashing but may put more back in. What diff fluid used in the f&r if you're on earplugs in the center? Ty from the future. Well this vid was a year ago. 🤣🤣👍🤙 Also just bought the set of 3 mip 1.5-2-2.5 at the time checking out didn't notice $50 for 3 hex tools, but we'll worth it. Had them and 2 other sets in my hand and walked up to the counter at Hobbytown and before I could ask was told, I know what your about to ask, I would do the MIP. And this was the rc mechanic at the store. They fit so snug. And haven't even come close to stripping the tool or screws.

[@BarstoneRC]

50k front 30k rear is what I run

[@tonysmith7989]

25 pinion is the biggest I was able to use with 46 tooth spur, using bother adjustment screws. Not wanting to go with only 1 like some do. I have a 38 tooth spool to drop in once in awhile for faster runs. But on frag races with friends, trying to keep the rear from swinging around off the line. Can usually correct it but would win more if I kept it straight. Have 1mill/F - 1mill/C and had 100k rear. So I change and put 500k in the rear. Must be the Hoons not hooking right, the GRPs are aLOT better and sticky. So gonna run them next to see if it stay straight off the line. If not, gonna have all 3 diffs with 1mill unless someone thinks of another reason the rear tries to out run the front even on a slight roll on then give it the beans, still will spin around. 🤔

[@BarstoneRC]

The GRP’s work far far better and hook up a lot better

[@andreasjonsson8075]

Make an airtunnel from body, into the electonics

[@thebigkingshow2983]

Nice lighting!

[@BarstoneRC]

I don’t know if I had it good or not lol

[@stankovic7150]

Try rear felony rear tires on all four corners, they are the same size as stock dirt tires. I have tryed banditl and they balloons crazy!!

[@BarstoneRC]

Yeah they did not last more then 10sec on the Typhon lol

[@stankovic7150]

@@BarstoneRC i have traction roll, deformation in corners, they unglued from wheel.... they are good for 3s car but on 6s its just too much 🤣🤣

[@justinmuller4809]

Hey man what for spur gear u are running on the typhon ? How much tooth ? Running ATM. 25t Pinion w. Stock Spur 50t Greetings from Germany

[@BarstoneRC]

I was running the stock spur

[@justinmuller4809]

@@BarstoneRC ah so you just replaced to a new one ?

[@BarstoneRC]

I’m trying to remember it’s been a little bit but it was stock for sure.

[@justinmuller4809]

@@BarstoneRC thank u man 🤘🏼

[@justinmuller4809]

@@BarstoneRC i need a spool from the limitless so i can get 100+mph with stock electronics. I will try to get the max limit out of the stock combo with the 2050kv 😛

[@ThisandThatRC]

Is that not a 0.8 gear meshed with a mod 1 gear 🤔🤔

[@sMoKeN904]

Hey bud looking good, excited for you. I'm in debate.. I finally broke something on my typhon 3s.. front left shock. I'm in between getting the proline, typhon 6s or spend extra an get the tekno sct410.3 shocks... people seem to swear by them. Any input? Not sure what your rocking on your 3s.. anyhow another great video, I get excited when I see my buddy has another video ps love the shop videos starting to get the speed bug from watching you an couple others

[@BarstoneRC]

The two shocks I’ve used on the 3S line has been the ZD racing shocks and the hot racing ones and the ones from the 6S cars. As far as durability the ones from the 6S cars pretty good so far the hot racing ones aren’t too bad either. I’m glad you like the videos man I appreciate you watching

[@EugeneRCDrezgalovo48rus]

Very good 👍

[@gianfrancofilippeddu9573]

Bel video, mi potresti elencare i codici corretti del pignone e della corona,grazie mille.

[@philthyco1]

They make those same tires in belted also