Awesome glad to see you still doing the work. So many people waste 💰💰💰💰 paying someone to install mods. When just taking the time and figuring it out can save them enough to buy more parts.
@SpencerHogg7 жыл бұрын
Blake's Garage amen to this eh
@dustiinw7 жыл бұрын
so true! Thanks Blake!
@alphaomega87137 жыл бұрын
Dustin Williams hey bro where did you get that car sticker on the side of your window?
@subradiant_music7 жыл бұрын
while I agree. it is nice to not deal with the headaches and if you don't have a lift. I never paid anyone to do any of my work but being that I am getting older. Just turned 31. I am starting to want to start paying people to install headache stuff on my wrx. I def am paying someone to put a downpipe in for me lol
@brennandoehring9967 жыл бұрын
While I can agree with this statement, having other people do work for you can make things a little more worry-free since you know you personally didn't mess up an install, and having a warranty on the work done. Some people also do not have the time to work on their own cars, but have the income to have somebody else do it for them. Regardless, people still love to drive their car no matter who built it!
@Thirdshiftsociety7 жыл бұрын
Sounds really good! Great job Dustin, you've come a long way! :)
@dustiinw7 жыл бұрын
thanks man!
@OvernightCrew2 жыл бұрын
This comment really aged well
@MrGsxrme6 жыл бұрын
Fyi, just did my Nameless turbo back exhaust and Perrin header on my new 2018 WRX. When u dropped my turbo I left the j-pipe on and just disconnected the j-pipe from the exhaust, removed the 6 manifold bolts and the 2 bolts that hold onto the turbo to the engine. Leaving the j-pipe on makes it super easy.
@MrChris2Fur7 жыл бұрын
I need someone like Tim in my life... lol.
@dustiinw7 жыл бұрын
haha we all do!
@ghill987 жыл бұрын
In a few short months I will join the Subaru nation and by watching your vids hearing the Tomei has convinced me that will be my exhaust system (almost went Gymkhana.) You are a true enthusiast and don't ever settle for less my dood!
@shamwaymoonyos95785 жыл бұрын
I did a number of mods to my 2015 WRX with 70K miles on it and man did I have an issue with that upper right difficult bolt. So much rust on the heat shield bolts I had to destroy my heat shield by bending it back and forth after getting some of the bolts off. But I had rounded out the nut. The Stud would NOT come out. I even got a stud remover and it sheared off the stud tip. Then I had no choice but to go to a few shops until I found one in the Bronx which is Meinike. They used their welder to destroy the nut leaving only the stud. So I had only 1 stud on the car (got the other 3 off with breaker bar ratchet). Only after that drove back to my fathers (can't work where I live on cars or even wash them) and installed J pipe down pipe. It is an Invidia which is hooked to my Corsa catback muffler. Only other difficult part was the front oxygen sensor. Had to resort to using vice pliers on it. Had to use foot to kick/push it breaking it free. I have had the car undercoated professionally at one point then every so often spray undercoat spray cans on it but the salt/rust gets to parts no matter what. At least I know that if I need to do headers I can probably break the bolt free easily enough since I put anti seize on every bolt. Sorry I did such a long reply can list all my mods but too tired. I agree with other poster that many folks spend money paying someone to install mods. It is the experience you gain and satisfaction afterwards. Sure it can be grueling and hell doing this at times but hey you did that yourself and damn it should damn well be proud of that! Don't let anyone else tell you otherwise. I have stock headers still might upgrade those along with the turbo I don't know. Currently I need/want to save money and spending on these types of things is so tempting to do. Once you start modding it never ends lol.
@MJLeWiZz7 жыл бұрын
YAAYYY great video man as always, dope setup and can't wait for the FMIC install video
@dustiinw7 жыл бұрын
thanks Marquise!
@wrightizle7 жыл бұрын
Tim is awesome! He helped me install my injectors in that garage, hes a damn Subaru genius!
@dustiinw7 жыл бұрын
yes!
@elijahadaminranoso2927 жыл бұрын
Nice work Dustin! It like exhales with the blow-off valve! So very smooth and the exhaust sounds like a beast! Great work man, also to Tim!
@dustiinw7 жыл бұрын
thanks!
@zeedee22437 жыл бұрын
seeing how accessible that turbo is makes me hate my N54 in my bmw
@joseguerrero-fk9jp7 жыл бұрын
Bro you are such a great KZbinr. You have an amazing talent with the camera hope next time you come to California you come to LA.
@dustiinw7 жыл бұрын
thank you so much Jose! I really appreciate that man
@ryanramgethy42677 жыл бұрын
I'M SO JEALOUS!!!!!!!!! THAT LOAD OF UPGRADES IS LIKE 10 BIRTHDAYS IN ONE
@dustiinw7 жыл бұрын
haha so true....
@A9sR37 жыл бұрын
Sounds great!!! Keep the video's going really like the content!
@dustiinw7 жыл бұрын
thanks so much! Glad you enjoy!!
@SpencerHogg7 жыл бұрын
Dude how are you so cinema even while getting your hands dirty wrenching beneath the car. Holy shiiit 😍😍😍😍😍😍
@dustiinw7 жыл бұрын
hahahahaha just baller like that haha
@zavoly94067 жыл бұрын
Yoooo my heartbeat rises like crazy everytime you upload! Keep it FUCKING UP BRO!!
@dustiinw7 жыл бұрын
ayyee! thanks so much man!
@carlossabala41813 жыл бұрын
Going to do this to my sons car thank you for the video it was very informative. Great video I just subscribed 😂
@CarsWithJR7 жыл бұрын
Sounds like a much cleaner sound!
@alanrizvanovic26417 жыл бұрын
Sounds really good with the headers and FMIC
@dustiinw7 жыл бұрын
thanks man!
@Th3BoyDad7 жыл бұрын
Put some safety glasses on bro when you're under the car. Safety first 😁
@dustiinw7 жыл бұрын
good call haha
@peternuesi67007 жыл бұрын
Gainz were almost not enough for those bolts to come off 😂
@dustiinw7 жыл бұрын
hahaaha had to take a breather in there haha
@coltertate39907 жыл бұрын
I don't understand why you only have 78 thousand subs, I feel like you would have alot more!
@dustiinw7 жыл бұрын
They'll all come in time!
@patroell7 жыл бұрын
Another dope video Dustin. Much love my man, you're personality and edits never fail to be inspirational. Hope to cross paths one day man.
@dustiinw7 жыл бұрын
Thanks so much Pat! I really appreciate that!
@00ruva007 жыл бұрын
yes that subie gives me chills
@dustiinw7 жыл бұрын
@chrisf32497 жыл бұрын
Safety glasses brothaa trust me you dont want that to stop your install vid 👊🏼 love the subie
@MrFahnatic7 жыл бұрын
I'm so happy to see you growing! It would be sick to meet you one day before you become to famous!
@dustiinw7 жыл бұрын
thanks so much man!
@terrillcooke3387 жыл бұрын
Wow that does sound a lot better. Didn't think it make that much of s difference idle wise but it does. Might have to add headers to my list of parts.
@dustiinw7 жыл бұрын
Thanks man!
@throtl7 жыл бұрын
Going to sound sick in person :)
@dustiinw7 жыл бұрын
you'll find out soon:D
@anthonygalicia43777 жыл бұрын
The turbo was a lot bigger than I expected
@dustiinw7 жыл бұрын
I know right!
@kylemartin3547 жыл бұрын
You're videos are so crisp. I love it!
@dustiinw7 жыл бұрын
thanks Kyle!
@justinfrench3867 жыл бұрын
good video bro, good to see you with a wrench in hand. Keep up the good work.
@dustiinw7 жыл бұрын
thanks Justin!
@xquisitelifestyle7207 жыл бұрын
Awesome install bro! never heard of this brand before but will def check them out 👍🏻
@dustiinw7 жыл бұрын
thanks man!
@psychdoggg5 жыл бұрын
2:49 this was basically my entire J-pipe install
@RHSTHUG7 жыл бұрын
Cars coming out super dope Justin!
@MJLeWiZz7 жыл бұрын
Christian Martinez Dustin**
@dustiinw7 жыл бұрын
hahaha thank you
@antdo7 жыл бұрын
I need to order that Subaru Ambassador chair!
@SpencerHogg7 жыл бұрын
Do Boy's Garage you do man ! Get it!!
@timrichards70157 жыл бұрын
Do Boy's Garage do it!
@dustiinw7 жыл бұрын
its so awesome! haha
@codykellner99852 жыл бұрын
Awesome.. great video...definitely going to help when I install my killer bee headers ...thank you
@jordonhewitt97217 жыл бұрын
glad seeing you work on your car and i enjoy your videos keep it up 👍
@dustiinw7 жыл бұрын
thanks jordon!
@nourromano77267 жыл бұрын
love the grind and your determination keep it up
@dustiinw7 жыл бұрын
thanks bro!
@catzbunn7 жыл бұрын
Nice pipes. Sure your cars gonna love them
@hawkeyebootz16957 жыл бұрын
Keep up the good work man loving the vids.
@dustiinw7 жыл бұрын
thanks so much! Glad you enjoy!
@connorfaughlin81397 жыл бұрын
Seriously In love with your car
@dustiinw7 жыл бұрын
thanks Connor!
@sethmanukula1767 жыл бұрын
Oh! I'm happy! I found Predator's Subaru watching those vids Nice build, I own one but it's actually dead (short block killed while overtaking a truck at 80mph) Post more
@TrVlogs827 жыл бұрын
Still sounds nice like I like the deep tones.
@dustiinw7 жыл бұрын
thanks!
@futurerocker447 жыл бұрын
Import Alliance is going to be MAAAAD!
@dustiinw7 жыл бұрын
can't wait!
@vegardulven95157 жыл бұрын
you need bigger boost💪
@omgacamel7 жыл бұрын
BIG BOOST
@dustiinw7 жыл бұрын
one day!
@cradlerofdeath7 жыл бұрын
Damn with that big ass wing this thing must fly
@santiagocastaneda76647 жыл бұрын
When you get dirty you know you doing the job right lol 😂 Your car is even more awesome Dustin💯🚘
@dustiinw7 жыл бұрын
haha so true!
@shmay101817 жыл бұрын
Hey Dustin im a big fan of your videos. Cars looking amazing im looking into getting a bov for my 15 wrx and i was just wondering if you had any lights come on in the dash for installing the aftermarket bov. Keep the videos going bro also awsome vid quality bro
@dustiinw7 жыл бұрын
Thanks man! I didn't, but I had a safe tune on the car.
@RexJones3 жыл бұрын
One time for the OG Wrx videos homie!!!!
@ratt3man6 жыл бұрын
I noticed you had oil drip on you when pulling the stock headers/turbo off, did you need to empty out your oil before the install? Or was this just a minor bit and it's not anything to worry about? Love the car and sound man! Just looking at upgrading my headers and was curious, thanks for any info!
@jacobbarney1244 жыл бұрын
Woooooow Tim looks soooo different! I didn't even recognize him!
@albinfrancis54177 жыл бұрын
Nice bro awesome Exited to see the next part 2 of the mounts 👌 keep pumping ✌👍🎥📷👦👅👌👐
@dustiinw7 жыл бұрын
thanks man!
@owenbell25725 жыл бұрын
Dang!! the FAs are so much different to work on and so much more difficult. I was considering one but im looking at your channel and i think if i get a new gen its gonna be an sti because i need that EJ still
@bengalvez70337 жыл бұрын
Awesome job dude!! Do all 2015+ WRX have turbos mounted under the engine bay and do all of the come with equal length headers? And did you go equal length headers because of the performance advantage?
@JugularJon7 жыл бұрын
Ben Galvez Yes to all questions, and unequal length headers wouldn't work with a twin scroll turbo such as this one. They don't make unequal length headers for the 2015+ WRX.
@dustiinw7 жыл бұрын
yes they do! and what he said about the twin scroll turbo
@DoubleDeezBro7 жыл бұрын
Great vid D-dubs!
@dustiinw7 жыл бұрын
thanks!
@harrycrisp44727 жыл бұрын
Before you even did this install, I was wondering how the hell you hear the turbo whine out the exhaust so well. Downpipe install and I missed it?
@dustiinw7 жыл бұрын
downpipe!
@GSZ8187 жыл бұрын
Sick video bro!
@dustiinw7 жыл бұрын
thanks!!
@jvilla47367 жыл бұрын
learning alot from you bro! keep it up!
@dustiinw7 жыл бұрын
thanks man! glad I can help!
@michaelcampanella91787 жыл бұрын
Aye that's SICK ! Good vid , great vid what more can I say !!
@dustiinw7 жыл бұрын
thanks man!!
@joesix47267 жыл бұрын
Good luck with the tune!
@dustiinw7 жыл бұрын
thanks!
@mx5ryan7187 жыл бұрын
was just lookin around said skrrtttt dudes awesome subscribed
@dustiinw7 жыл бұрын
ayye thank you!
@bisterousmusic27387 жыл бұрын
She's coming along perfectly Bro I can't wait to see the final product.🔰📷🚘🍕
@dustiinw7 жыл бұрын
thanks so much man!
@MrSrgiggles7 жыл бұрын
Another great video Dustin! Just wondering whats your frame rate is at?
@dustiinw7 жыл бұрын
thanks! i shoot at 24fps
@keinanjames36107 жыл бұрын
Cool man been waiting days for your video wanna e like u when i grow up
@dustiinw7 жыл бұрын
thanks man!
@shs6467 жыл бұрын
Are you going to do a turbo at the same time as the intercooler ? Thought we might have seen it done at the same time as the header instal. Def would work well with those headers making her breath that much easier
@dustiinw7 жыл бұрын
No, no turbo yet
@tylerryan257 жыл бұрын
Sounds really good bro!
@dustiinw7 жыл бұрын
thanks Tyler!
@eliasdagher39217 жыл бұрын
Bro, sounds great!
@dustiinw7 жыл бұрын
thanks man!
@myoko1346 жыл бұрын
How do you like the seibon hood? Looking into getting a hood an trunk from them
@sctsby017 жыл бұрын
what is the turbo? is it stock or is it aftermarket? i love the vids, edits. always inspirational
@dustiinw7 жыл бұрын
stock turbo
@romankartsev2203 жыл бұрын
With those headers were you able to put back factory heat and dirt shields??
@alexdonnellybmx91647 жыл бұрын
hair is on fleek great vid 👌
@dustiinw7 жыл бұрын
ayyee haha thanks Alex
@moritzbrinkmann99807 жыл бұрын
Could you maybe try to fix that noise when you shake the mic? 😊😊
@benwilkinson15947 жыл бұрын
mandrike you suck, pointed it out and now it's the only thing I hear lol
@MaxMcGadney7 жыл бұрын
Ben Wilkinson IKR
@timrichards70157 жыл бұрын
mandrike it's the camera. Has small metal clips on the side. I will think of something to fix that for him. Bugs me too lol.
@dustiinw7 жыл бұрын
Tim is coming to the rescue... bare with me for the next like 5 videos haha
@moritzbrinkmann99807 жыл бұрын
Haha ok great 👍
@iTsGamerZ4 жыл бұрын
what does the boost controller do? also can you guide me for what u did for your catless downpipe? or j pipe? i wanna do the same thing but not sure how to do so because i heard you need a tune, what all did you do for ur j pipe?
@Become_Ungovernable7 жыл бұрын
Hey Dustin! Are you planning to make a video for the ETS Intercooler! I would really appreciate it for reference when I go to install mine since there is no video made for the install yet!
@dustiinw7 жыл бұрын
already up!
@bisterousmusic27387 жыл бұрын
Do you plan on getting a bigger Turbo in the future?
@dereksmorg72207 жыл бұрын
Underdog Status doesn't everyone?
@dustiinw7 жыл бұрын
I sure do!
@krispewkreme45107 жыл бұрын
Are there turbo kits for the 15+ WRX? I haven't seen any as it's in a weird location and a twin scroll.
@stevev45997 жыл бұрын
I been watching your videos for a long time and idk if i didnt listen or no but do you have any mouths upgrade on your car or still running stock
@TheJMedia7 жыл бұрын
More loud = Sounds great!
@dustiinw7 жыл бұрын
yes!!
@aaronendo81506 жыл бұрын
Bro I got a stage 2 17 and I'm concerned how that motor will hold up the power of the headers? I've done extensive searching and have come up with the conclusion the motor will pop shortly after anything past stage 2+. I've been thinking about headers but my findings have stopped me so hopefully his shit holds up.
@CervantesGarage7 жыл бұрын
It sounds amazing
@dustiinw7 жыл бұрын
thanks!!
@pabloa.tomasellia.32147 жыл бұрын
Hola Saludos de ECUADOR Like seguro saludos soy nuevo suscriptor sigo tus concejos y veo todos los avances de tu auto
@selmirmehmedovic69907 жыл бұрын
this video was interesting and cool, love it
@dustiinw7 жыл бұрын
thanks!
@laststone7777 жыл бұрын
Do you feel any turbo lag increased after new header installed ?
@pieczar91837 жыл бұрын
Awesome video bro 😍😍💪💪😍
@dustiinw7 жыл бұрын
thanks Karol!
@JoshCraigie7 жыл бұрын
Hey Dustin! i love your videos! I'm 14 years old and from scotland. I am currently working for a local car dealership, you have inspired me so much so that i would love to become a mechanic in the near future. Please keep doing what you're doing! your car sounds and looks amazing too! i also wanted to ask what make/model of camera and editing software do you use?
@dustiinw7 жыл бұрын
Thanks Josh! I use the Sony a7sii and I edit on Premiere Pro
@JoshCraigie7 жыл бұрын
Thanks for replying! I love you! #nohomo
@XxxDJMOSCASxxX7 жыл бұрын
Looking good bro🙏👍👍👍
@dustiinw7 жыл бұрын
thanks man!
@TheGrizzlyGarage7 жыл бұрын
Bruuuhh you look like your 16 with your hair down lol. Dope headers man, don't even have a wrx and I enjoyed the install haha.
@dustiinw7 жыл бұрын
haha thanks man
@KingOfPortraits7 жыл бұрын
Duuuustin whats up with the hair bro lmao, damn I wish it was that easy to install my headers
@dustiinw7 жыл бұрын
ayyyeee haha
@ukeacreator934 жыл бұрын
Can you get un equal length headers for the 15 wrx ?
@BlueSTI7 жыл бұрын
Ya sounds good it's deeper
@dustiinw7 жыл бұрын
thanks!
@djshyproductions7 жыл бұрын
hey man..love your work! was wondering, what do you shoot in and export? shoot in 60fps export 24fps?
@dustiinw7 жыл бұрын
thanks! Shoot and export in 24fps
@0pLegit7 жыл бұрын
Sounds awesome 10/10 ! Can't wait to see it get Dyno'd
@dustiinw7 жыл бұрын
thanks man!
@emrbas75187 жыл бұрын
Wow DUSTIN williams
@dustiinw7 жыл бұрын
thanks!
@xXSUPREMEOMEGAXx7 жыл бұрын
first time I've seen him without a hat on
@dustiinw7 жыл бұрын
hahaha
@AsanaxSquish2 жыл бұрын
Did you tune it?
@stivenkasa68713 жыл бұрын
Where did you get that spoiler?
@dereksmorg72207 жыл бұрын
Sounds good. Looks good. Hair is looking good. No homo.
@dereksmorg72207 жыл бұрын
Subaru Sti I know I went full homo
@dustiinw7 жыл бұрын
thanks man!
@epicclips4567 жыл бұрын
I didn't realize the turbo location on the fa20
@dustiinw7 жыл бұрын
yep, under everything! haha
@TylerTea7 жыл бұрын
Always getting oil all over you lmao
@dustiinw7 жыл бұрын
brooo i know!
@cheongbryan29767 жыл бұрын
Where u put ur boost controller??
@brannonparmer71067 жыл бұрын
Why didn't Tim wrap the headers themselves?
@dustiinw7 жыл бұрын
there's no need for that. The instructions called for the surrounding parts.
@shaun44337 жыл бұрын
I wanna hear the bov under boost!!!!!!!! but good work homie keep it 👆