Making V42 Stiletto Part 3

[@Take_And_Make]

Expert: You can’t do it without lathe or mill! Slavik: Do you even live bud? Amazing skills! For those smart asses who suggested to buy a lathe, you really think he doesn’t know it would be easier? Or maybe he’s afraid to use it? He shows to majority of viewers without these machines, that difficult tasks like these, still could be performed with common tools. Respect!

[@SLAVIKTELY]

I wan't a lathe soooo bad but this is where glory is shown...built by hand.

[@coonass732]

Which is why I live watching your videos ! You show so much on what can be used by an average person's garage or in your case small shop. I really enjoy your set up. Less is better .

[@mamatuja]

Of course slavik is great. I just threw the lathe out there cause I'm a machinist.

[@osoeduardo]

Oh man!!! I was going to make the same joke 😁

[@fnord5]

Tely, I'm sure I've offered before, but I have a Bridgeport with a dividing head/spin indexer. If you ever need anything made, I'm local to you. Or heck, if you want to play with it even.

[@radamus210]

This might be a new record for most labor intensive pommel ever! As I was watching all the markup I imagined what you could do with a lathe. I have to bet the balance in the hand turned out incredible!

[@SLAVIKTELY]

You will see it came out amazing. Have you seen my Jagdcommando knife video? You will like that video.

[@radamus210]

@@SLAVIKTELY I've seen all your videos - Yes, that knife was a TON of work - it's unbelievable that you did that all by hand. No one would believe it if they didn't see it, it is that good.

[@gregnorvell9730]

Wow man you never cease to amaze me! You definitely have inspired me not to complain that I dont have "this or that" in order to build or make something. Your the MacGyver of knife making!

[@SLAVIKTELY]

Thanks Greg.

[@wingnutbert9685]

Your ability to accurately machine material with simple tools and real hand work is one of the most valuable contributions to knife making by anyone on the web and should be required viewing for new machinist as well.

[@lovejcdc]

Tely sir you are definitely a good machinist with the resources you have at your disposal. Very impressive and I can't wait to see the end result.

[@amanshaikh2327]

You r not just a knife maker.. you are ACADEMY of knife making.. the details you do is mesmerizing

[@clydeadair3809]

My father always told me that "necessity is the mother of invention" you are a master of making other tools work for you when you do not have what you need. Excellent!

[@SLAVIKTELY]

Your father was right.

[@hulkssparrow5128]

Another reason this dude's my favorite knife maker!

[@frenchblacksmith8066]

I love how you have very small equipment compared to other and still prove that you can make the same quality with just more time and dedication.. well done!

[@ВикторСысоев-ю7к]

Один из сильнейших мастеров,почти на коленке такие красивые ножи делает,уважение!!!

[@adamsoto6466]

A true craftsman you are! Bringing to life your ideas with everyday tools, a plan and sheer guts and determination. Very inspiring sir.

[@scotto8843]

Amazing that you are making a pummel nut without a lathe. Hats off to a true artisan!

[@luxtempestas]

Man, this was the best knife video i watched on YT in a long time! The bandsaw job on the pommel was amazing!

[@alme6743]

Making the butt cap with no lathe seemed like quite the chore, but you knocked it out and proved you can accomplish absolute precision by hand, well done!!

[@hwyman02]

Even after watching him do it O still think “Yeah this is gonna have to be done on a lathe by someone that knows what they are doing”

[@louis1071]

Slavik Tely, The Grand Master of Making Knives!!

[@coonass732]

I am so glad you are making more Knives! I truly love your work !

[@bumblebebike]

When I saw you start to mark out the pommel I was thinking “I didn’t see a lathe in his set up”. Truely eye opening to see the way you planned out a difficult task and used skill and a massive amount of precision to complete it. Thank you for sharing this build.

[@Ben_D.]

I cant believe your skills at eyeballing things. You make round things with flat machines, and when you mill off the sides of the blade in complex curves with just a belt sander, my mind is blown.

[@SLAVIKTELY]

Thank you

[@plasticoflamingo2952]

I think you are my favorite knife maker on youtube. Your builds are beautiful. This one seems to be the most enjoyable to watch yet. I can't wait for the finish!

[@villeneuveromain]

No lathe... No problem!! Always amazed by this awesome knifemaker.

[@karaengandi6457]

Longest knife making i ever saw,but its worthed with his great skill.

[@syedabdulbasheersyed9769]

This time you worked harder and cleverly, you added some extra beautiful work.... lovely to Watch your video in lockdown, you are not just a knife making person you are absolutely a legend to make & work on such kind of beautiful knifes, amazing to watch but can't wait for final video, so keep it up your awesome work..... come soon with final Video

[@SLAVIKTELY]

Thank you very much.

[@syedabdulbasheersyed9769]

@@SLAVIKTELY most welcome Dear

[@ПрофессорМавродаки]

Дядя , это гениально ! Я понял , что нет ничего невозможного -- без токарки такие работы ... ))) Лайк !

[@raulmorales9967]

This is the guy who really built the space ships.Nice work.

[@kemet-son]

How to convert band saw to lathe 🤗 this is slavik tely ♥️ the professional 👌

[@RedBeardOps]

Heck yeah! Thank you sir for these videos.

[@koshaz3x]

You never cease to amaze me, that work would've been so much easier if you just had a lathe, I hope you can get one soon, regardless want you to know that your videos are so relaxing, taking care of the minimum detail for your quality, kudos my friend, greetings from Bolivia.

[@Aleeknives]

Wow Tely amazing production! Who needs a metal lathe anyway! Way to go with the tools you already own man

[@William_Borgeson]

It's amazing what you can do with the tools you have at your disposal Tely, you are a true craftsman and yeah their are easier ways but seeing you do this with what you have truly shows off your talent! Be well friend!

[@SLAVIKTELY]

Thanks Will.

[@ФренсисДрэйкк]

Ааааааа!!!! Ору. Этот человек реально фанатик. Уважение ему!!!

[@markharrisllb]

I'm learning more about measuring out from your videos than I have from any other videos, thank you.

[@SLAVIKTELY]

You are welcome.

[@rnd.min_]

If there is a will there is a way. Always with the amazing craftsmanship! Love it!

[@maherrida6671]

I am an Arab from Egypt, but I love what you do. It is art

[@Jacob.Hajarat]

I wish u had a lathe to see more amazing creations, but on the other hand I am really amazed by your skills with the tools u have! It shows your skills and creativity!

[@thewiseegg]

I don’t know the first thing about knife making or whatever but you’re a legend, man.

[@SLAVIKTELY]

You know when you see one. Thanks.

[@Kuziming]

Бесконечно можно смотреть на то, как льётся вода, Горит огонь, Падает снег, И другие работают...

[@Jehan4757]

Agreable de regarder avec quelle propreté il travaille . Tres bien équipé en plus . Bravo Monsieur .

[@josephrector8735]

Machinist: but Slavik you don't have a lathe. You can't make that part.. Slavik: I have a metal cutting bandsaw, a drill press, and excellent spatial recognition.. Machinist: ??? Slavik: just watch ...

[@davidsegovia2397]

Its crazy how I've been watching your videos since I was 15!!! I always love your stuff no matter what it is, you could even say you got me into knives 😂

[@DarkFire515]

What a beautiful knife. Superb craftsmanship!

[@nateand3]

Dude....you amaze me with how much you do with so little

[@ridwan0786]

You are an artist of Metal

[@PhileusActual]

Mate! That was genius! I'd have never thought to do that!

[@karlalton3170]

Dude no lathe , no milling machine ? Just homemade jigs and use your brain end result fkg awesome job , ive watched all vids end product to be proud of well done mate 😁😁🤘🤘🤘🤘

[@SLAVIKTELY]

Thanks 👍

[@markfulmer67]

Wow! Very impressive work can't wait for the next video

[@MAndersenbamboorods]

Thank for showing how you make pummel nuts. I am about at make may first one for a Bowie and without a lathe it makes it hard. But with your style of doing it I may try It this way. It’s the Tely way

[@gettogoo]

Believe me I love your work. You know what's good thing in you and why I like your videos you show every single thing the angle, work, etc. You are the best 👍. And sorry for I haven't watch your video kida busy 😇. But. I'm back.

[@SLAVIKTELY]

I appreciate that!

[@gettogoo]

@@SLAVIKTELY ❤️❤️❤️❤️❤️❤️

[@mirashino425]

I love how he always take measurements for every parts.

[@1955din]

Без токарного станка точил!!! Браво!

[@MonquSurtonpif]

My teachers : You can't make cylindrical shapes without a lathe. Russian knife makers on the internet : Хольд мой биир сука!

[@АНДРЕЙКАВ-д5й]

Definitely like it! I look forward to every video! You need a small lathe so that you don’t have to worry about small details for so long) but it’s expensive (((

[@jamesjiles8139]

I love all the detail in hand work.

[@voblerknife3846]

Отличное видео , четко и грамотно смонтировано.

[@NarTac13]

That looks really hard!!

[@ДедъПихто]

у меня чуть глаза не вытекли, наблюдая, как Славик без токарного станка мудохается с выточкой стеклобоя

[@muhammadarifin-ke4jx]

I love to all your creation bro!!! Good job,Great details. 🤝🏼👍🏼👍🏼👍🏼👍🏼

[@subhanmughal1468]

Man your videos are so addictive

[@ПечникКоканд]

Смотрю на твой мучений и мне так хочется подарить токарный станок но у меня нет денег 😯😯😯

[@AlexPhantom82]

Не надо ему станок 😱 А то вообще разойдётся, я потом от монитора не отойду.

[@SLAVIKTELY]

У вас денег нет а у меня места нет для него. Так давайте выпьем за то чтобы наши... ;-)

[@craniorosso]

Gold metal for you ! You are very ingenious.

[@АлександрКечин-ш9й]

Наглядный пример того, что если нет токарного станка, слесарь все равно справится с поставленной задачей!👍

[@SLAVIKTELY]

Все бы так понимали. Спасибо за комплимент.

[@АлександрКечин-ш9й]

@@SLAVIKTELY ,мы с вами отчасти коллеги, я слесарь-сборщик летательных аппаратов и цену вашего труда я знаю.

[@scepanovic1]

laborious work. congratulations.

[@abhishekshukla2209]

Wow done all that without a lathe!

[@gustavodecastro8420]

Seu trabalho é incrível!!!! Parabéns!!!!!

[@billhennen978]

Very ingenious and resourceful!!

[@smrettpecca]

If i would see somebody working on a Pommel like that in my Workshop, i would fire him! nice work, but safety first!

[@SLAVIKTELY]

Good thing I don't work in your workshop.

[@gregnorvell9730]

Not me. I'd give them a raise! Safety can be taught. Innovation and ingenuity can not! I dont really see a safety concern anyway.

[@smrettpecca]

@@gregnorvell9730 That's one of the elemental differences between " learnig a Profession, or just doing it! " ;) Over here we spend three and a half years in training pupils to learn a Job. Saftyrequirements includet. after that time, they' ve got to improof if they're able to do the Job, or not. Wearing Gloves while working on a Bandsaw, or rotating machines, is an absolutet Satfety No Go ! ;)

[@desantos1234]

Have you ever made a mechanical or folding knife? A balisong would be a cool build, and theyre one of the easiest non fixed blade knives to make too

[@ASuperBambi]

He made a csgo balisong, scale was a bit off but it worked. Channel handles were really impressive with the tools he had.

[@desantos1234]

@@ASuperBambi oh damn, I ought to take a look! Cheers mate

[@pilou71]

Magnifique !!!!!! BRAVO !!!!!!!!!!!

[@sudo_nym]

Enjoyed this!

[@a.d4911]

You definitely need a mini lathe

[@mamatuja]

You need a Lathe!

[@sean1121970]

That was REALLY clever but painful!

[@badrmaoujoud]

Nice work ! 👌

[@robertaugust7425]

Time to get a lathe eh?😉 Thanks for the videos! Nice work...

[@SLAVIKTELY]

No room for one

[@robertaugust7425]

@@SLAVIKTELY Mine fits nicely on top of my tool box. It's small, 8 x 14 Lathemaster. You can Google it. They don't make my brand anymore, but there are plenty of small quality lathes out there. The Lathemaster was one step up from a true mini-lathe. Still a Chinese import, but slightly bigger and higher quality, and from looking at this video, it would be the perfect size for you. Thanks again...

[@Burgerqueen_5223]

Talk about adapting and overcoming! Holy shit.

[@jeremiahquinlan2482]

Ah for fuxxksakes I’m dumping my tools !!! After this I can honestly say I have no excuses brilliant brilliant!! Wow all that without super fancy tools brilliant

[@SLAVIKTELY]

Don't dump them, save your hands ;-)

[@nizammohdshah9948]

Nice, cannot wait for more videos tq sir

[@Димка-ш2ь]

Профессионально, красиво

[@johncameron4155]

what brand files do you use, choosing the right file for a double cut must take time for a smoother finish.

[@SLAVIKTELY]

I use Nicholson files

[@damianmoroldo]

stop playing with my anxiety

[@taharasuli4049]

just i can say you best of this job👍👌 its my grow😓😓

[@subhanmughal1468]

Please make a set of mini push daggers please ❤️❤️

[@andreagambaro8263]

as many times said you are an artist congratulations. A question the tool you use to trace the precision lines where can I find it?

[@SLAVIKTELY]

Height Gauge.

[@andreagambaro8263]

thanks

[@dmg4415]

Big knife maker, no lathe? Mr Tely i got a band saw, and could think in the 5th dimension! Still waiting! Will it be a 5 part series?

[@SLAVIKTELY]

I think 4 and a Q&A

[@ethanchaiko3755]

awesome video and craftsmen-ship stay safe

[@Il_Bruno]

Usual masterpiece Mr Tely. Stupid thing: it is stiletto, because it came from latin stilus

[@vladimirlivshits4224]

Жаль, что нет токарного станка.

[@ЮрийКим-ф6х]

Можно зажать деталь в фрезерный или сверлильный.

[@Torwald_Gry]

Да, токарный бы станок явно не помешал бы

[@MJ-wh1ny]

Smart man 🙏❤️

[@TheRedPanda.]

What got you into making knives?

[@SLAVIKTELY]

Sitting home on unemployment.

[@TheRedPanda.]

@@SLAVIKTELY oh.

[@MaulBlast]

This is the best.

[@ВасилийНиколаич-х5ч]

Я еще такого не видел! Инструментальщик 68 го разряда!

[@muhammadbudruzzaman7911]

@4:55 no late machine, No problem!

[@freenational]

Oh, cutting the pommel with a bandsaw is just too much work. You need a mini lathe.

[@gor33311]

Someone: we make the back of the knife on a lathe. Slavik: hold my beer.

[@NamBui-ot2ox]

What is the name of the ruler that marks the tree in the circle?

[@SLAVIKTELY]

Circle template

[@ПечникКоканд]

Смотрю ещё раз и он молодец у него нет токарки и он старается делать лучше есть такие рукожопай у них есть всё но они все равно рука из жопай

[@amarsa1558]

Nice keep going

[@niktorro6946]

Нужен срочно токарный станок , упростит работу

[@harrymason2455]

Фрезерный

[@АлексейЖуков-х9ы]

Nik Torro А автор ролика типа не знает:)

[@niktorro6946]

@@АлексейЖуков-х9ы думаю знайет всё уперайетса в финансы и место где йево поставить ,

[@АлексейЖуков-х9ы]

@@niktorro6946 Вот именно. Так что, как говорится " Не учите меня жить, лучше помогите материально" (с)

[@niktorro6946]

@@АлексейЖуков-х9ы задоначу сколько смогу

[@MPablo-ct5ut]

Amazing craftsmanship! But please don't use gloves on the saw! If the teeth catch them, the saw might pull your hand in. Don't want you to get injured! Keep it up and stay safe and healthy!

[@SLAVIKTELY]

I kept my fingers far away.

[@audi3275]

A lathe wouldn't hurt

[@cmdrdisulfiram]

Even a mini lathe would have cut the amount of work here to about 20%. And those are cheep-ish. It was still enjoyable to watch though.

[@SLAVIKTELY]

I don't have room for one.

[@SLAVIKTELY]

Popov, mini lathe can't handle 1.5 inch diameter.

[@cmdrdisulfiram]

​@@SLAVIKTELY I guess you are right, there are mini lathes that can handle 1.5" work, but they are still actually big and would take a lot of space. Not to mention crazy expensive. I was just trying to be helpful, as I see a lot of other people in here. Just finished watching part 4 and the knife turned out great :)