In this video, I give an overview of how I build violin pipes. The pipe I build is the scale used in a Wurlitzer 157 band organ.
Пікірлер: 83
@johnhodgdon376711 ай бұрын
Thanks for posting this fine instructional video of almost a lost art today!
@jimp.72867 жыл бұрын
A huge thanks. A true pro makes things look easy as you do here. I've wanted to see violin pipes being made for decades, (hugely curious), and for me, a better video class in the process couldn't exist. I actually get it! Thank you again.
@BobdeGroot53 ай бұрын
I love organs. Very interesting to watch. Makes me want to learn and be an organ/pipe builder.
@harmonic338 жыл бұрын
What a lovely and insightful thing to share. Thank you so much. (My favorite part was watching you wipe glue on your leg, apron, bench etc. It reminded me of my father repacking a bearing with grease)
@josephmueller3357 жыл бұрын
How would I find plans to build a Wurlitzer carousel band organ with the xylophone and drums
@josephmueller3357 жыл бұрын
And what wood would you recommend
@johnferguson40894 жыл бұрын
Very interesting to see a professional working. Thank you for your clear commentary.
@coryingman8 ай бұрын
Thanks for posting this. It's hard to find this info elsewhere so clearly. I can see now why it's considered to be one of the more hands-on skills.
@andrewurbanowski1666 Жыл бұрын
Excellent ear, eyes & hands at work creating musical happiness !!!Bravo!!!!
@lancasterbook32859 жыл бұрын
So fascinating to see this after watching so many of your rest runs. Incredible craftsmanship Bruce.
@ChrisRichmond7 жыл бұрын
16:00. That jig has provided an ingenious answer to one of my many head-scratching moments as I develop my plans to build an organ of my own. Thanks for sharing. :-)
@spartanx159 жыл бұрын
Excellent. It is really interesting to see this done. Thank you. It brings a bit more knowledge in how these wonderful machines operate.
@philipvermoortel65552 жыл бұрын
Fantastic. Such craftsmaship! Congrats!!!
@No_hazmats9 жыл бұрын
Thank you so much for sharing this! I am just beginning a W-105 build and it's very helpful to see pipe construction, and especially the tuning. I hope you might consider doing a similar video with a trumpet pipe.
@DuoArtOrgan9 жыл бұрын
No Hazmats Sure I can do that - it will probably be toward the fall though before I have time.
@dannixon2475 жыл бұрын
I'm watching this again after prolly 5years. Lovely, thankyou.
@jameslouder3 жыл бұрын
Thanks for sharing your video, Bruce. There are lots a neat ideas here and of course, your finished work looks impeccable. But...and I'm really sorry there's got to be a "but"... How you make the upper lip bevel is unsafe. *Never* do *anything* freehand on the table-saw, especially with the blade standing 3 inches proud of the table. Oh, sure...it's a small piece, I've got this backing-block...I'm in complete control. What could go wro... SCREE! SCREE! SCREE! A bird comes streaking in through the open window of your shop, hell bent for the Coast, with a hawk in hot pursuit. Right past your head. You jump, and...well, dammitall anyway! I sure was ...ah...attached to those fingers... Think something like that couldn't happen? It did in my shop, about ten years ago--and the head they flew past was mine. In the event, I was only working at the bench, so my only risk was...like, maybe a heart attack?! But I like to think if I or one of my people had been at a machine, the setup would have saved them from injury. It's not enough to make accidents unlikely, you have to make them impossible. I say this in all humility, Bruce, believe me. Because this old organbuilder learned the hard way: the machine never asks, "Ummm, buddy, is this really what you have in mind?" OK, enough ranting. Now, tocompensate for my preaching with something positive, here are a couple of suggestions The safe way to make such a chamfer on the saw is to move the fence to the left of the blade. Set your angle, saw out a zero-clearance strip the thickness of your work-piece, and fix it to the fence with double-backed tape; or tack it to the table insert with a couple of little finishing nails. Feed the work-piece vertically, using a chaser-board thick and wide enough to completely cover the saw-blade until you're out the other side. Alternatively, perhaps easier, is to make a jig to hold the work-piece at the desired angle--a simple U-box with second, false bottom that pivots at the far end. Set your angle, pin the false bottom in place, clamp the work-piece to it, and pass a router on the two rails above. Piece of cake!
@steambrewer6 жыл бұрын
Concise and professional. Thnx.
@ByrdMann20109 жыл бұрын
While I am, by no means, done watching your channel or going to unsubscribe, this is exactly the video I've been waiting for and asked for in the past. I appreciate that this video is less about detail and more about technique and gives good fundamental knowledge on the process. Am I going to run off and make a pipe? Not yet. (Got to work at getting my butt into the shop and completing the player I'm working on.) But very inspirational and fuels some of the ideas I have for future projects. Thank you!
@argi07742 жыл бұрын
Interesting sound for a violin
@keithcitizen48557 жыл бұрын
Thanks for showing , most interesting.
@alfredborg19 жыл бұрын
You doing great job my Friend
@121omePiet9 жыл бұрын
Great Bruce!
@Olafko8 жыл бұрын
Hi, thank you very much for the video! I'm German organ builder myself and the video is just great to show the audience how much work is just on one single (wooden) pipe, knowing how many pipes an organ got and also how big they can be (the smaller make more work in detail, the big ones are just unhandy). Im just wondering why the toe is not a compound with the wind chamber as one piece of wood (sorry for my english, i hope you got what i mean). I have seen it many times in church organs like that and it makes the work easier, also easier to glue and you can even turn the toe with the complete pipe in the lathe. Or is it unhandy - or Wurlitzer made it exactly like you did? Thanks in advance!
@DuoArtOrgan8 жыл бұрын
+Olafko Hi, I'm glad you find the video useful! Yes I've seen some European pipes with toes that are made by extending the pipe body then turning the the toe by inserting the whole pipe into a lathe. The method I demonstrate in the video is the way Wurlitzer did it but I also like this technique because I can be much more accurate this way. Also the end result is a toe made of a single piece of wood rather than several pieces glued together.
@pictoescultura8 жыл бұрын
Ud es un gran maestro organista felicitaciones desde buenos aires argentina
@DuoArtOrgan8 жыл бұрын
Hola Daniel! Gracias por tus palabras tiernas y tu apoyo :) Fuimos a Chile hacen unos meses pero no alcanzo el tiempo para visitar a Buenos Aires. Algun dia me gustaria conocer Argentina.
@pictoescultura8 жыл бұрын
que lastima ,no podes dejar de venir la proxima vez.yo estoy en la feria de san telmo de anticuarios desde ya 30 años asi que ya sabes nos encontraremos ,saludos
@M_m.aang.uxz.19026 ай бұрын
Nice 🎉
@MrUABama7 жыл бұрын
Could you do a video on how to build piccolo pipes? I am building a street organ and would like to learn how to build these...
@CryTears17 жыл бұрын
Hey...somebodys gotta do it! LoL....very interesting.
@MAXthespicyvideomachine9 жыл бұрын
Wow! Cool stuff
@phooesnax5 жыл бұрын
Very interesting! Thank You
@boptillyouflop8 жыл бұрын
Woa this is so fascinating!
@bertvdlast6 жыл бұрын
Nice man, could you make a video of making a low C 64 ft wooden pipe?
@andrewbarrett15372 жыл бұрын
1. I don’t think his workshop is big enough to hold the pipe even horizontally, and 2. The lumber needed to build one pipe in that octave is probably about the same amount needed to build a tiny house. There are only two 64’ stops in the world: one in a town hall organ in Australia (which I think is a reed stop) and the other in the Atlantic City Convention Hall Main Auditorium Organ (which is a diaphone). The latter stop was actually literally constructed in the building (in the chamber) and each pipe was hoisted into place using rigging. It is probably impossible to remove these pipes from their chamber without dismantling them. I have no idea how the big tuba/trombone pipes in the other organ were built / installed.
@andrewbarrett15372 жыл бұрын
Those pipes are also considered so low in pitch as to be practically musically useless. 32’ stops are at least audible (even though some notes sound more like a helicopter hovering), and a few other musical instruments do make notes in the 32’ octave.
@alancordwell97599 жыл бұрын
very interesting, thanks :)
@Jorge_Organero16847 жыл бұрын
Estan chulos de bonitos esos tubos mi estimado, y el sonido!!! DIsculpe usted, un "Band organ" es uno de esos organos que van en un carro y traen un tambor y platillos y que tocan con un rollo de papel o un secuenciador MIDI?
@happycamper5213 Жыл бұрын
Ha! I thought I was the only guy to put the belt sander upside down in the vice!
@DuoArtOrgan Жыл бұрын
Lol yeah I used that old belt sander until the bearings gave out!
@apxpandy49657 жыл бұрын
Great work, but where do you get the patience. All that work for just one pipe - wow!. But, how do you get the 'string' tone from a wood pipe. I thought most wood pipes were 'flutes'? Thanks for the vid!
@DuoArtOrgan7 жыл бұрын
Hi - yes it takes a lot of patience and time to build pipes. Wood can be used for just about any type of pipe that you might see more commonly made of metal - even trumpet pipes. For wood violins, the key is the narrow scaling of the pipe, the low cut-up of the mouth and the brass frein which guides the air sheet over the mouth preventing the pipe from overblowing.
@apxpandy49657 жыл бұрын
+DuoArtOrgan I think I get it (sort of). I would love to be able to build an organ, but I can still remember from my high school days when we had to do 'woodworking' and I built a snall drawer chest. The teacher's 'oh dear' still haunts me! But, your work is fantastic and admirable. I'm very jealous of your skills, but I know I would never be able to do that. Sigh! Thanks again!
@robotwolf2 жыл бұрын
I love everything you do! Does the vacuum pressure have to be reversed to play through a pipe or other wind instrument? The last part of your video suggests that they work "in reverse."
@colbysmith4476 жыл бұрын
What is the length of the large bevel? You mentioned the length of the mark for he blocks, but didn't mention the large bevel length. Thanks,
@DuoArtOrgan6 жыл бұрын
The bevel length changes from note to note - it's not a fixed measurement. Whatever pipe scale you're using will specify the length of the bevel. It's typically somewhere between 1X to 2X the width of the front of the pipe.
@colbysmith4476 жыл бұрын
Thanks, really enjoy your, more then helpful, videos. Very inspiring. I'm in the process of deciding on the Senior 20 or Universal. It'll be the only one I'll be making, so I'm thinking, why not pull out all the stops and go for it! I've done some rather technical project, so I'm confident I can handle it. Check out some of my projects at lumberjocks.com/tallshipsailor/projects. Thanks again for your inspiration!
@grindertom9 жыл бұрын
Do you have a source for your freins; or, if you make your own could you please make a video on making them. Thanks.
@DuoArtOrgan9 жыл бұрын
Tom Griffith Hi Tom, I make my own freins. Next time I need to make a batch I'll post a video.
@jimbryan43817 жыл бұрын
I was going to ask the same thing. Looking forward to it.
@cesaredeiaco79938 жыл бұрын
Ciao, a me piacerebbe sapere anche come si costruiscono gli altri tipi di canne per organo, in particolare quelle che riproducono il suono del sax e delle trombe. È possibile?
@DuoArtOrgan8 жыл бұрын
Hi - yes I've had a few requests to make a video on building trumpet and other reed pipes. My next project involves building several sets of pipes for a Mortier dance organ so if I have time, I'll make a video.
@victorruiz72887 жыл бұрын
Im making a rank of cello pipes and a celeste for them myself and am about to start crating the sides and fronts of the pipes. this is very helpful! Also do you have any detailed pictures of the tuning slot? I can't get a clear image on how to make them for my cello pipes.
@DuoArtOrgan7 жыл бұрын
I use a small bit on my router table to make a cut in each side piece about .030" deep and about .075" wide. I'm away from my shop until the end of the month and don't have any detailed pics on this computer.
@victorruiz72887 жыл бұрын
Oh okay then. Thanks for telling me. Also would it be possible to purchase around 100 Frein Harmoniques from you? With the limited tools and limited experience working on metal, I have not had much luck making a decent one in the past week.
@DuoArtOrgan7 жыл бұрын
Victor Ruiz sure, contact me when I'm back in July and let me know the widths you need. I make them in 1/4" increments.
@victorruiz72887 жыл бұрын
Okay then. Around how much will you charge? Just so I can be ready and have an idea on how much I'll spend.
@DuoArtOrgan7 жыл бұрын
Victor Ruiz $4 each
@mortier96 жыл бұрын
Why is the pipe interior sized with hide glue rather than shellac?
@DuoArtOrgan6 жыл бұрын
Frankly I'm not sure other than perhaps hide glue was cheaper than shellac back in the day. While hide glue is traditional, I've also used shellac.
@nicktilburgs15314 жыл бұрын
what wood do you use to make the parts for the pipe because I want to make a pipe but I don't know which wood is best to use hopefully you have an answer to this
@andrewbarrett15372 жыл бұрын
I’ve heard of wooden band and street organ pipes made out of maple, cherry, beech(?), alder(?), poplar(?) and probably a few other types of generally hardwood. Perhaps pine might have been used for some large bass pipes (to cut down on weight), but be careful using any softwoods as those are most easily attacked and eaten by termites aka “woodworm”. I know of a large fairground organ whose softwood case was mostly eaten by termites (as well as a couple of the softwood channel dividers in the windchest and one of the softwood pipe risers for the facade pipes), but whose pipes were largely left intact, most likely because they are made of harder wood (also, the organ was ‘rescued’ from bad storage conditions twice in its life, which probably also halted the termites from making further progress), although an entirely new case had to be built.
@Toobula3 жыл бұрын
Excellent! What wood are you using?
@andrewbarrett15372 жыл бұрын
I’m also curious, but I presume Maple as that is commonly used for many band organ and orchestrion wooden flue pipes.
@AdnanNajabVistro Жыл бұрын
Hello sir pLz make Harmounium
@nicktilburgs15315 жыл бұрын
which wood do you use to make the pipe?
@Chopy618 жыл бұрын
Hello, may I ask how or where you get the scaling?
@DuoArtOrgan8 жыл бұрын
+Chopy 61 There are a few sets of band organ plans you can often find on Ebay and probably other places. You can also look for a copy of Doyle Lane's band organ scale book.
@Chopy618 жыл бұрын
+DuoArtOrgan thanks
@Chopy618 жыл бұрын
DuoArtOrgan May I know the name of the book by Doyle Lane?
@DuoArtOrgan8 жыл бұрын
+Chopy 61 I believe it's simply called Wurlitzer Band Organ Pipe Scales
@andrewbarrett15372 жыл бұрын
Yes I have this book and it is indeed called Wurlitzer Band Organ Pipe Scales. I *think* it may be available as a PDF in the “Members Only” section of the AMICA website, but not positive. That book was published in the 1980s and I think copyrighted, but since Mr Lane passed away in the early 2000s or so I think the copyright has lapsed. Not positive and an curious. It’s a fairly thin book with a comb ring binding, and only occasionally found for sale online, but keep looking for it. The scale drawings / measurements themselves, scaled down, are from the original factory scale boards found mouldering in Ralph Tussing’s basement in North Tonawanda, and Ralph, who along with his family had worked for the Wurlitzer company (some of his family also worked for North Tonawanda and Artizan), had gotten these items from Wurlitzer, along with the two remaining roll perforators and band organ master rolls (which came from Wurlitzer to Allan Herschell Co. about 1945), when they phased out their band organ department. It’s NOT (unfortunately) scales for ALL DeKleist/Wurlitzer models, only mainly those produced after 1916 or so such as the 103; 104/105/106; 125; 145/146; 148/150(I *think*); 153; 157; 165; 180; and Caliola. This is only measurements for wood flue (flute, diapason and violin) pipes, and not for the reed pipes nor brass piccolos I *think*. But still a very useful book. The boards were used by builders in the factory to pick off the relevant measurements for each pipe using a set of calipers. Amazing this still exists, if even only for the most common 1913-1929 or so models (which to be fair accounted for like 2,000 organs, including most of the surviving originals). Some seldom built or one off organs like the 162/163 (only 1 ever built); 164/168/175 (only 5 ever built); the 166 (only 2 ever built), and the “65 note piano roll organ” (only 1 ever built) are not included, nor are early 1910-1919 styles the 126 (9 built) or 147 (58 built), but by and large nearly every other 125, 150 and 165 roll organ is included.
@danbetts71147 жыл бұрын
Who is learning the craft for the next generation? This may help!
@ralphedelbach3 жыл бұрын
This has a lot of good information but I find it frustrating that the person operating the camera can't keep the important view framed or get close enough to see exactly what is happening. For example, at 16:53 when you are measuring something with the dial indicator, you don't clearly explaining what you are doing and the camera isn't framed well for some time. Drawing a diagram on paper would help explain what is going on. The camera operator is MADDENING! Never shows you adjusting tuning at top of pipe at 36:00!!!
@DuoArtOrgan3 жыл бұрын
I agree with you completely! I should definitely have inquired about his camera skills before marrying him.
@PaulMmn2 жыл бұрын
I hope you wear hearing protection when you're not filming... you should wear hearing protection even when you are filming!
@rudolfbenner48025 ай бұрын
audio very low.
@jrzzrj8 жыл бұрын
OMG...I feel faint seeing you use that machine so (seemingly) unsafely....@ 2:11 etc......I know you are good at it...but it's scary looking.... Otherwise...a very good tutorial...Thanks....JRZ
@rferi674 жыл бұрын
Such a great task and so bad video recording! It is terrible, how the cameraman can't manage the camera! We could look at the master's knee, or the completely out-of-focus parts, for a long time.