Making Wooden Threads - Homemade Tap and Screw Box

  Рет қаралды 3,921,117

Pask Makes

Pask Makes

Күн бұрын

Пікірлер: 1 600
@anonymouse2888
@anonymouse2888 5 жыл бұрын
I'm glad I found this channel. I haven't worked with wood in decades but this guy's ingenuity and straightforward thinking makes me consider getting back into it. Also, the lack of some over the top intro with terrible theme music makes me SUPER happy. He just gets right into the task at hand. I applaud you, sir!
@greghall2216
@greghall2216 6 жыл бұрын
I really enjoyed the video. No annoying music, no talking heads. I loved when you showed trying to retrieve the blade from the oil. I needed a laugh. Many blessing!
@PaskMakes
@PaskMakes 6 жыл бұрын
Thanks Greg! :)
@irondsd
@irondsd 7 жыл бұрын
John Heisz was trying to make something like that in the course of a few years and a dozen videos, and you nailed it on the first try. Impressive.
@PaskMakes
@PaskMakes 7 жыл бұрын
Thank you Konstantin! John is still one of my very favourite youtubers though. :)
@evarejao
@evarejao 7 жыл бұрын
Konstantin Mednikov: as said in the US keep it simple!
@dtwistrewind7361
@dtwistrewind7361 7 жыл бұрын
Pask Makes magnet an a stick would have been handy for the oil retrieval,great video.
@miraithelizard2171
@miraithelizard2171 7 жыл бұрын
D twist Rewind that wouldn't work because he removed it's magnetic properties
@netman69
@netman69 7 жыл бұрын
It would work, the piece of steel just lost it's magnetic properties cause it's heated above it's "curie point". It will resume being attracted to magnets as soon as it cools down.
@alexandrupreda4645
@alexandrupreda4645 5 жыл бұрын
It was until the very last moment I figured out how these things will work together. Whenever I see you upload something new, I stop from what I'm doing and start watching, you have an incredible imagination and technical skills. Please keep your good work.
@a0flj0
@a0flj0 6 жыл бұрын
I remember hearing someone say that the chip-out becomes much less, regardless of the wood being used, if it is soaked in oil for a day or two prior to cutting the threads.
@csbarnett1975
@csbarnett1975 Ай бұрын
I know this is 7yrs old but I watched it through and laughed so much when you dropped that piece in the oil and struggled to get it out....totally relatable. Thanks for the great video.
@_P0tat07_
@_P0tat07_ 6 жыл бұрын
That’s so cool. The “die” worked so much better than I thought it would have. Great job
@SwampDonkey64
@SwampDonkey64 7 жыл бұрын
I have been a construction worker for 35 years. I am a jack of all trades's master of cosmetic finishes. I am a fair finish carpenter. What you are doing is art. I certainly gather fantastic ideas from watching your videos. Thanks and take care. 👍🏽👏🏽👏🏽👏🏽👏🏽
@PaskMakes
@PaskMakes 7 жыл бұрын
Thank you very much! :)
@danimal3162
@danimal3162 6 жыл бұрын
I am a retired machinist. This was a fascinating video. Great work, Bro!
@virgilsmithwoodware
@virgilsmithwoodware 3 жыл бұрын
Good to see someone who subscribes to the idea that not everything has to be perfect in order for it to function. I liked your video & your attitude.
@68HC060
@68HC060 6 жыл бұрын
Very good and inspiring video. Soaking the wood in oil for a week before tapping will make it much stronger.
@PaskMakes
@PaskMakes 6 жыл бұрын
Thanks! I do soak the dowel blanks now in boiled linseed oil. I only soak overnight but that works well! 😊
@paulhaggett3710
@paulhaggett3710 6 жыл бұрын
Ingenious. It just shows ‘Where there’s a will, there’s away’. Loved how you condensed this complex process to under 10 mins. Must have a go.
@garybarchas4984
@garybarchas4984 5 жыл бұрын
When I finally get another shop space, I'm going to make this to cut my bench vise screw. Along with a few other of your ideas.
@mjjayful
@mjjayful 6 жыл бұрын
Can I say, I don’t need one, and I haven’t got the skills, or tools, to make one, however I love watching you use your skills. Brilliant!
@Fraususemil
@Fraususemil 4 жыл бұрын
I can't tell how much I appreciate this. It's just what I was searching for!
@fakecubed
@fakecubed 4 жыл бұрын
What your project that needs something like this?
@Fraususemil
@Fraususemil 4 жыл бұрын
@@fakecubed Restoration of a spinning wheel and other supplies for fibre processing. And build tools to clamp on a table.
@kcrowder7622
@kcrowder7622 5 жыл бұрын
I'm not sure which I like more, the fact that you did a superb job and it works well or the high speed footage. Well done!!
@toms4123
@toms4123 6 жыл бұрын
I admire your talent. Thank you for taking the time to make and publish the video.
@PaskMakes
@PaskMakes 6 жыл бұрын
No worries Tom! :)
@douggief1367
@douggief1367 2 жыл бұрын
Its good that he guides us in the process on thought development not just "strutting your stuff".
@rfldss89
@rfldss89 4 жыл бұрын
7:37 What the heck! I've seen a few of your videos, and even I didn't expect it to work that well! Good job :) your definitely one of my favourite woodworking youtubers. No messing about, no huge spiel at the start of every video, just you trying to make something for the hell of it and not even knowing how well it's even going to turn out :)
@k9insomniac783
@k9insomniac783 4 жыл бұрын
You sir represent what every single wood working enthusiast should want to strive to achieve. We simply forget about what men and women used to make with what they had on hand, instead of buying tool after tool to achieve what could be done with time, imagination, and of course, desire. Thank you for these videos
@AquaPeet
@AquaPeet 5 жыл бұрын
I saw someone soaking the wood in oil before threading it, to eliminate chip outs. What a great toolset you built there!! Totally awesome!!
@cesidiolanciano4957
@cesidiolanciano4957 3 жыл бұрын
I thought I saw all your videos and instead every now and then one comes out, as always brilliant. "This is not an apple" then shows that you are not only of a unique sympathy, but also subtle and cultured. Thanks for the curiosity and skill you share. Cesidio
@zacdredge3859
@zacdredge3859 4 жыл бұрын
Best "Not an apple" drawing I've seen all day. Also glad to see some Mighty Boosh merch on an already great channel.
@SacchiMoto
@SacchiMoto 4 жыл бұрын
I love your craftsmanship, as well as the trueness of your videos. The retrieving of the cutting tip, out of the oil, brought back childhood memories, that gave me a chuckle. One of the games that my Mom would set up for us at birthday parties, was dropping a few nickles in a jar of water, and giving us chopsticks, to try and get them out. You wouldn't that that it would be too hard to do; and everyone thought this, right up until she'd set the egg timer to three minutes, then...everything changes 😯
@TheMarionetteKitty
@TheMarionetteKitty 4 жыл бұрын
This is one of the most epic things I've ever seen.
@bjorncj
@bjorncj 4 жыл бұрын
Thanks for sharing this brilliant method. Guys like you make this place a better world.
@dakotamax2
@dakotamax2 4 жыл бұрын
A short while ago I was at a tool store and saw the scaffold leveling screws and thought "these could serve another purpose." Wow, just wow - always inspired by your projects!
@danshavit4510
@danshavit4510 5 жыл бұрын
I wouldn't be able to desine and build such jigs in a million years. And you make it look so easy. Love ur show mate. Your great!
@marcuskoko5577
@marcuskoko5577 6 жыл бұрын
I was repairing an old and big threaded rod earlier today and i privately thought to myself "i wonder how they make these" now this video popped up on my feed and i am convinced that google has some sort of transmitter in my head
@StoicReasoning
@StoicReasoning 9 ай бұрын
best chippy i worked with was a four bells. I like how you show the mistakes rather than editing.... thanks. really helpful bro.
@artconnolly9519
@artconnolly9519 7 жыл бұрын
that was awesome. one of my favorite things is to make recognizable every day things that are usually metal like a nut and bolt. And make them from wood. great build brother
@PaskMakes
@PaskMakes 7 жыл бұрын
Thank you very much! Glad you enjoyed it. :)
@thecurrentmoment
@thecurrentmoment 4 жыл бұрын
Hornbeam is supposed to be hard and dense and was traditionally used for cogs, etc. There are some other woods around the world that were used in their respective locations to make cogs, hold a thread, etc because of their properties.
@therealzilch
@therealzilch 3 жыл бұрын
I love your quick and dirty approach that gets the job done. I've made a number of taps and dies myself, but much smaller ones, also quick and dirty and useable. cheers from overcast Vienna, Scott
@timscott6630
@timscott6630 7 жыл бұрын
carpenter and machinist all in one; genius, brilliant. Thank you for sharing
@dalyjolly5891
@dalyjolly5891 5 жыл бұрын
Amazing job. The last vid of this sort showed a thread cutting kit, which I'm not interested in paying for. You MADE the cutter. Wow! Thank you for showing us how.
@ryotheblessedchild9210
@ryotheblessedchild9210 6 жыл бұрын
THATS AMAZING I never thought you could make that sort of things out of wood, absolutely brilliant
@dethcreeper69
@dethcreeper69 Жыл бұрын
6 years on from first watching this video I now need to use this information. Thanks fella
@demonshaz
@demonshaz 5 жыл бұрын
Isn't it amazing what you can do without power tools. This, I can attempt to do. Please make more of your lovely creations without power tools
@VestigialHead
@VestigialHead 5 жыл бұрын
+ Saj Tyk You certainly could do this job without power tools. He used plenty of power tools though. Lathe, drill press, disk sander.
@stanimir4197
@stanimir4197 4 жыл бұрын
@@VestigialHead seeing the mother of all power tools lathe, I was wondering if it'd be easier to cut the bolt thread with a single point tool.
@petermarsh4993
@petermarsh4993 5 жыл бұрын
Dear Neil, magnificent example of ingenuity at work. I like the fact that you produce a long tap to start the process, rather than the shop bought models which only have a few threads on them. One thing you may consider is making a bottoming tap to match the taper. That way you can start a hole that ends with the taper cutter and finish to depth with the bottom cutter. Then you can sink your thread all the way to the bottom. What is also an interesting concept is to get a starting thread that is highly suitable for things like vices - an Acme thread. I have seen some at my antiques store for $20.00 and would make an excellent set of taps - taper, intermediate and bottomer. Acme threads have a better profile and quicker movement than whatever thread was used on this demonstration. I have been playing around with making dowels and wooden threads using various approaches. I used a shop bought thread cutter kit. I soaked my wood {Victorian ash} for three days beforehand and the threads went surprisingly easily. Unfortunately, the threads were brittle and touching the tops broke them off. I then tried some ironbark which was recently milled and quite moist. I didn’t soak this in oil but it cut like butter and the threads are strong without breaking. I guess what one has to do is to experiment with a few combinations of technique to get the ideal end result. Happy turning!
@paulandrulis4672
@paulandrulis4672 7 жыл бұрын
I don't say this very often. That is one heck of a nice piece of work. Great job and my hat is off to you.
@REACH_khbk
@REACH_khbk 6 жыл бұрын
Absolutely awesome! I don't have the skills to do things like this, nor the woodshop, but I admire the heck out of it and watching it was a pleasure.
@PaskMakes
@PaskMakes 6 жыл бұрын
Thanks very much Katrina! :)
@АлексейРублев-п8р
@АлексейРублев-п8р 5 жыл бұрын
Мужик! Какой же ты классный и крутой!!! Очень нравятся все твои видео!!! Очень здорово!!!)))
@davidbutler8340
@davidbutler8340 3 жыл бұрын
Excellent video. Human ingenuity is boundless.
@chm1701
@chm1701 6 жыл бұрын
No idea if it's useful, but it was bloody good fun to watch, not forgetting to mention, super interesting.
@rouge5140
@rouge5140 6 жыл бұрын
it's really usefull, epecialy when making stools because you can make the adjustable
@tjunkieu2b
@tjunkieu2b 3 жыл бұрын
very surprising that cutting the dowel worked that well nut is clear - the "tap" cuts in many passes with increasing depth while the single cutter for the dowel has to do the full depth in one pass amazing
@EduardoTorresDeMadera
@EduardoTorresDeMadera 6 жыл бұрын
I've learned a ton only in 7 mins. Thanks for sharing your techniques.
@DONOCARSON109
@DONOCARSON109 2 ай бұрын
That is amazing. To buy those it would cost an absolute fortune. A work of art.
@CarlManson1983
@CarlManson1983 7 жыл бұрын
Love it. Was thinking you could make into self-contained system where you can include somewhere to store the tap on the box and even the dowel template could be incorporated into one of the parts as well.
@PaskMakes
@PaskMakes 7 жыл бұрын
Thanks Carl! Maybe I should make a box for them. :)
@CarlManson1983
@CarlManson1983 7 жыл бұрын
Good idea! But I think it has to include wooden screw joinery somewhere. :P
@davidrussell8689
@davidrussell8689 6 жыл бұрын
“Hope it’s useful for somebody” Your videos are wonderful , interesting and practical . There’s so much to learn from them . Thanks and keep the good work up !
@Frankowillo
@Frankowillo 6 жыл бұрын
With those 2 gizmos you can build wooden bench vises that sell commercially for hundreds of dollars.
@johndoyle7902
@johndoyle7902 5 жыл бұрын
Jimmy Buckley please
@johndoyle7902
@johndoyle7902 5 жыл бұрын
Grate
@t.c.nevzatozdogru7929
@t.c.nevzatozdogru7929 2 жыл бұрын
Super minds, super masters. I appreciate it very much. Greetings from Turkey.
@Cs39601
@Cs39601 6 жыл бұрын
Man I absolutely loved this video , very informative and I love that you sped up the video but showed every detail , I just recently got a lathe and I’ll be trying out some projects soon
@FilmForger
@FilmForger 5 жыл бұрын
FINALLY a Nut and Bolt that won't rust!! Nice Job Cheers!
@donaldklopper
@donaldklopper 7 жыл бұрын
Beautiful work! Loved the annotations and the bit of humour too with the oil drops...
@PaskMakes
@PaskMakes 7 жыл бұрын
Thank you - glad you liked it Donald! :) It's good to hear feedback - the annotations take me hours and I do question whether it's a good use of my time.
@mickydl66
@mickydl66 4 жыл бұрын
A masterpiece. Beautiful guy I have no world to say how I appriciated your video. Bravissimo, Micky from Italy
@soleneisconbi7302
@soleneisconbi7302 6 жыл бұрын
This is super impressive and you get extra points for the Mighty Boosh tee....
@martinlicha8443
@martinlicha8443 3 жыл бұрын
i am a Toolmaker and your Idea to make a Screwdriver for Wood is a very good Work i'm excited!!!!!!!!!!!!!!! sorry about my english
@burnedsoul1100
@burnedsoul1100 6 жыл бұрын
Perfect job man. It's good to see videos like yours at the net. Congrats. Keep up the good job. Greetings from Greece.
@piperjon8949
@piperjon8949 7 жыл бұрын
Just terrific! Being able to tap screws and nuts like that, you can make all kinds of very functional things for the shop, that's really great!
@EasyHomeMadeProjects
@EasyHomeMadeProjects 7 жыл бұрын
Awesome!
@PaskMakes
@PaskMakes 7 жыл бұрын
Thank you! :)
@tschallacka874
@tschallacka874 4 жыл бұрын
Very cool! Against the chipping I saw a video yesterday that soaked the wood in oil for 24 hours. Maybe that'll help?
@Genubath1
@Genubath1 3 жыл бұрын
He ended up doing that when he made his bar stools kzbin.info/www/bejne/l2bZi6lsd8aHaNU
@tschallacka874
@tschallacka874 3 жыл бұрын
@@Genubath1 nice!
@rapid9990
@rapid9990 6 жыл бұрын
That was just awesome. I'll definitely be trying that.
@skjelm6363
@skjelm6363 6 жыл бұрын
Great job! Thanks for sharing this! I have got 2 Tips on top of that: - usage: ~3h in advance before you cut the bolt and the hole, put on some line oil varnish on it, so it cuts better without splitting out - you can built the cutter too with a handle (little thinner), so it is easier to turn it around the fixed bolt, instead of turning the bolt through fixed cutter.
@PaskMakes
@PaskMakes 6 жыл бұрын
Thank you! Since making the video I've started soaking the blanks in oil overnight before cutting the threads. I also made a handle that quickly clamps to the bolt to make it easier to turn! :)
@skjelm6363
@skjelm6363 6 жыл бұрын
Sounds like an update-video to me ;)
@godofplumbing
@godofplumbing 7 жыл бұрын
Man who catches metal with chopsticks, can accomplish anything.
@PaskMakes
@PaskMakes 7 жыл бұрын
Haha! :)
@michaelbannerman-roberts1518
@michaelbannerman-roberts1518 4 жыл бұрын
Brilliant - love the trial and error approach as it highlights some of the problems encountered (and how to sort them) To avoid chipout when cutting the thread, soak the dowel in oil for a week b4 cutting. Hand made tools r much more satisfying to work with than those bought off the shelf. 👍👍👍
@ibrahimcilek-iboswoodshop
@ibrahimcilek-iboswoodshop 7 жыл бұрын
Perfectly done. Thanks for your time and sharing the video.
@PaskMakes
@PaskMakes 7 жыл бұрын
No worries! :)
@kzookid2051
@kzookid2051 6 жыл бұрын
Another great video. I love how you show how to make tools a lot of folks can't afford, so we too can have a great workshop. Thanks!
@demofactory
@demofactory 6 жыл бұрын
That was fun to watch and also very informative. Thanks for sharing your talents with all of us!!!
@fieroboom
@fieroboom 2 жыл бұрын
OMG thank you SO MUCH for showing your screw-ups. I relate to them SO much, and they make me feel SO much better about everything I do!!! 😁😁👍👍
@craigmonteforte1478
@craigmonteforte1478 6 жыл бұрын
Nice job on the tap and die similar ones i saw for sale from woodworking supply stores were kid of pricey imo I dont see much of a advantage of those ompared to yours other than the build time needed ? Since the outcomes re pretty much the same thing
@rouge5140
@rouge5140 6 жыл бұрын
doesn't take that log to build, if you take the time/cost ratio it's much bette to make one
@tigertoxins584
@tigertoxins584 6 жыл бұрын
This is genius! I would have never thought of this on my own! Not that I plan on making it, but it goes to show how creative a person can get.
@thomasarussellsr
@thomasarussellsr 6 жыл бұрын
That's a great build. I've added it to my tool build list on my channel. Brilliant! Thanks for sharing.
@PaskMakes
@PaskMakes 6 жыл бұрын
No worries Thomas! :)
@aotilanyoldthingilike1686
@aotilanyoldthingilike1686 4 жыл бұрын
I loved this video. I am working on an antique chest of drawers that had the feet on its turned legs cut off, I assume to make it sit level. I want to make replacements that I can thread into the bottom, so that they can be removed or replaced to preserve antique value. Even though I will research the design as much as I can, it is always possible that sometime in the future, I will find that the feet that I turn for it doesn't match the period properly. It will also make it clear that I am not attempting to fool anyone that a repair has been done.
@dontknowsht8771
@dontknowsht8771 5 жыл бұрын
why must i find this the day before i finished my wooden bench vice and struggled a lot with the threads...
@ivan7453
@ivan7453 4 жыл бұрын
Hi Neil, you make difficult things look so easy. Sheer brilliance
@victorinborsciov6817
@victorinborsciov6817 6 жыл бұрын
I liked the "oops" sequence. The old fashioned way of doing things with passion.
@jimmyumanaquesada5543
@jimmyumanaquesada5543 4 жыл бұрын
I am from San José Costa Rica, I am a.Carpenter of educational matherial and This is a great idea for kids!!
@divinefever
@divinefever 7 жыл бұрын
I have no idea what I watched, or why I watched it, but it was great
@PaskMakes
@PaskMakes 7 жыл бұрын
Glad you enjoyed it! :)
@sigung01
@sigung01 4 жыл бұрын
Brilliant! One of the best woodworking - maker channels on KZbin!
@JedidiahShultzIrishCraftsman
@JedidiahShultzIrishCraftsman 7 жыл бұрын
😲😲😲very cool pask!!!👊👊👊every time you upload I learn something new! I greatly appreciate you sharing your knowledge 😊😊💚🍀
@PaskMakes
@PaskMakes 7 жыл бұрын
No worries mate! :)
@JedidiahShultzIrishCraftsman
@JedidiahShultzIrishCraftsman 7 жыл бұрын
:) cheers!
@นกาน-ผ4ซ
@นกาน-ผ4ซ 7 жыл бұрын
Jedidiah Shultz Irish Craftsman ေကာင္ပါပ်ီ
@johnadams6440
@johnadams6440 4 жыл бұрын
Brilliant. I have an antique lamp with a wood screw and stripped threads. Now I know how to fix it. Thanks!
@redgeminiarts3674
@redgeminiarts3674 4 жыл бұрын
I feel like I’m watching Forged in Fire. lol Thank you for sharing.
@AndreaArzensek
@AndreaArzensek 7 жыл бұрын
That's wonderful! Usually these sets cost quite a bit of money . Thanks for sharing
@Certified_Art_Teacher
@Certified_Art_Teacher 5 жыл бұрын
Was laughing my arse off watching you fish that cutter! Great video!
@vigilante004
@vigilante004 7 жыл бұрын
Very nice instructional video. I love making wood bolts and nuts. I am going to have to try to duplicate what you made as soon as I get my shop cleaned up again. I honestly have lost some big power tools in the sawdust and turning debris from my lathe.
@ajeje1996
@ajeje1996 6 жыл бұрын
3:50 That was painfully relatable. Jokes aside, this is very clever - well done!
@drummondF
@drummondF 6 жыл бұрын
The Mighty Boosh shirt pushed this video from an A+ to an A++.
@izzyswan
@izzyswan 6 жыл бұрын
this is so cool
@PaskMakes
@PaskMakes 6 жыл бұрын
Thanks Izzy! Glad you think so mate! :)
@entrepreneursfinest
@entrepreneursfinest Жыл бұрын
Excellent video! I'm in need of making a very large (6" diameter) nut and bolt for a community cider press we're building and this video was super helpful.
@woodworks3585
@woodworks3585 7 жыл бұрын
Wow That was Brilliant..Thank you for sharing...shared.
@PaskMakes
@PaskMakes 7 жыл бұрын
Thank you very much Terry! :)
@woodworks3585
@woodworks3585 7 жыл бұрын
Your very Welcome...... :)
@Grumpyneanderthal
@Grumpyneanderthal 4 жыл бұрын
Thanks Neal, I"ve learned for others that if you soak that dowel in mineral oil or blo for about a week it will cut much easier and pretty well eliminate chip out. Thanks for working this out. I need a wooden thread for a face vise and $200 for one is a bit much.... going to give it a go
@dekurvajo
@dekurvajo 7 жыл бұрын
absolutely what i was looking for, thank you. I would like to ask you, if its working only with softwood, or is it possible to use hardwood as well?
@PaskMakes
@PaskMakes 7 жыл бұрын
No worries! The threads I made here are with hardwood - although camphor laurel isn't the hardest of hardwoods. I reckon it will work better on hardwoods than softwoods, there is more chance of tear out with softwood. :)
@dooley9621
@dooley9621 4 жыл бұрын
Well done mate good job. There was no big expensive tools used here was all mainly hand tools. Love ya work.
@ligno_creativity
@ligno_creativity 5 жыл бұрын
Респект тебе, человек из зарубежья. 👍
@drmkiwi
@drmkiwi 4 жыл бұрын
Good stuff, thanks Neil. KIngs Fine Woodworking had a good idea to reduce the tear out when cutting threads. He saturated the timber in "mineral oil" the threads cut beautifully. Cheers, David
@Cactusworkshopchannel
@Cactusworkshopchannel 7 жыл бұрын
"this is not an apple" lol :D Fantastic job!!! I have to say you have great lighting in your shop too :) all natural?
@PaskMakes
@PaskMakes 7 жыл бұрын
Thanks Cactus! The lighting is actually pretty poor. I have to set up lights for every shot - it's a bind but as a photographer I wouldn't be happy with the results from the natural light available. :)
@Cactusworkshopchannel
@Cactusworkshopchannel 7 жыл бұрын
Pask Makes well then I must congratulate you because the results are fantastic :) great job!!
@PaskMakes
@PaskMakes 7 жыл бұрын
Thanks! :)
@tongkiparts4672
@tongkiparts4672 7 жыл бұрын
Pask Makes amazing you worked with complete tools that you can work with and this wooden bolts really good work 👍
@lalitsharma-sn5vf
@lalitsharma-sn5vf 7 жыл бұрын
Cactus! workshop 8
@abnormi101
@abnormi101 4 жыл бұрын
WOW. I am so impressed. I am impressed by how much work goes into everything you create. I tip my had to you. Greetings from Germany
@JimsonMakes
@JimsonMakes 7 жыл бұрын
Brilliant project, much more successful than my recent thread cutting video. Cheers, Jim
@PaskMakes
@PaskMakes 7 жыл бұрын
Thank you Jim - I'll try and check your video out if I get chance. :)
@kennethnevel3263
@kennethnevel3263 3 жыл бұрын
You need to put a second cutter on the die to cut at half the thread depth to cut first that will help with the chip out . Good job making it , worked good .
@joshwillis1726
@joshwillis1726 7 жыл бұрын
Magnet on a string would probably be easier than the chopsticks of doom.
@PaskMakes
@PaskMakes 7 жыл бұрын
That would've been easier but I thought I'd get it easy enough with the sticks - wasn't as easy as I thought though lol :)
@MaybeDave
@MaybeDave 7 жыл бұрын
You just needed to channel your inner Korean and put both of those sticks in one hand! :)
@sistermaide
@sistermaide 7 жыл бұрын
I liked that you showed this, just lets us all feel the frustration with you, how these little things are bound to happen from time to time. :)
@act.13.41
@act.13.41 7 жыл бұрын
You don't even have to use a string. Just drag the magnet up the outside of the container. ;-)
@claws61821
@claws61821 7 жыл бұрын
Acts 13:41 until you lose the magnet
@phi9249
@phi9249 7 жыл бұрын
Very good work. The method as important as the result.
77 - The Secret to Making PERFECT Wooden Threads
19:26
Kings Fine Woodworking
Рет қаралды 581 М.
Making a Cool Little Box from a Log - Scrapwood Challenge Ep54
19:51
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
Where DO screws come from?
18:33
Machine Thinking
Рет қаралды 2,1 МЛН
This DaVinci Machine Unlocks Precision!
13:05
How To Make Everything
Рет қаралды 568 М.
Making a Dead Blow Mallet with a Brass Handle
24:34
Pask Makes
Рет қаралды 988 М.
Selfmade Tools for Wooden Thread Part 4: Tools in Action
16:44
little forest
Рет қаралды 477 М.
Transforming A Stainless Steel Bolt Into A Fully Functioning Miniature Lathe Chuck
28:44
HANDYMAN TIPS AND TRICKS THAT REALLY WORK
45:11
TechZone
Рет қаралды 1 МЛН
$0.09 Razor Blade into $3,000 Knife
19:02
Kyle Royer
Рет қаралды 5 МЛН
Making of accessories for cutting wooden threads
13:39
HomeMade in Lviv
Рет қаралды 144 М.
Making a Moxon Vice - Scrapwood Challenge ep30
12:52
Pask Makes
Рет қаралды 663 М.
how to make thread in wood
17:53
Victor Taller Bushcraft
Рет қаралды 722 М.