How to Make Laser Cut Flip Flop Earrings

[@cassandraknight6485]

Those are summer! Going to make some myself! Great inspiration!

[@MakingwithMarilyn]

Thank you so much!!!

[@latenightcraftingwithstace3009]

THEY ALL ARE CUTE BUT THAT 3RD SET IS REALLY NICE.

[@LorraineCastellon-Rowe]

These flip flops are just way too cute!!! I really love them all but my favorites are the sunflower earrings. Thank you so very much for the tutorial. Can't wait to see the video using the Cricut. 🏵🌺🌼🌸🌻🌹🌷💐💖

[@MakingwithMarilyn]

Thank you! And I love all the flower emojis😍

[@kraftnheavenllc]

Finally a glowforge tutorial Love It 💕 they're so cute you did a terrific job ☺️

[@MakingwithMarilyn]

Thank you so much! If you happen to have a Glowforge, I have several videos on my channel that I probably posted before you subbed. If you have any special requests, let me know.

[@kraftnheavenllc]

@@MakingwithMarilyn I don't have one as of now but I love looking at tutorials so when I am blessed with one I will be ready ☺️

[@MakingwithMarilyn]

@@kraftnheavenllc I did the same thing. I watched tons of videos for a very long time before I ended up getting one. I still watch tons of videos on crafts I don't "yet" do:) Thanks so much for watching!

[@kraftnheavenllc]

@@MakingwithMarilyn love your channel thanks for sharing

[@CraftyLeoCooks]

These are all super cute. Even the pair you painted! Thank you for such a great tutorial.

[@MakingwithMarilyn]

Thank you CraftyLeo! The painted ones are okay, but it was so much more fun making the fancy ones:)

[@yourteesyourway]

Wow Marilyn, I love this, they are so cute, Thanks for sharing

[@MakingwithMarilyn]

Thank you Crafting Away!!! BTW, I mailed your shirt on Thursday and you are supposed to get it Monday:)

[@yourteesyourway]

@@MakingwithMarilyn You will be glad to know I just got in from work and it was here, I truly love it Thanks a lot. Now I just need to get some content up so that I can get my numbers moving. I really Love this crafting team. You all teach soooo much, Thanks again for all you do

[@MakingwithMarilyn]

@@yourteesyourway wow that was fast! I am glad you like it. I sent a few replacement stones in case any come off. I don’t think they will, but …

[@barbaralong5209]

Cutest earrings ever.

[@MakingwithMarilyn]

Thank you Barbara!!!

[@tinarichardson8085]

Thanks for making this tutorial!! I just got a laser machine and I’ve been building up my knowledge to try to make something. It’s intimidating! You make it look easier. For painting-use makeup sponges instead of paintbrush. You can use sharpie markers to touch up edges of wood if you mess up. I’ve also seen people engrave outline designs on flip flop and use paint markers to paint the design.

[@MakingwithMarilyn]

You're welcome! Thank you for the painting tip! Also, I am uploading a video today where I cut the earrings with a Cricut. In the new video, I go into the file and show how to make it work with 2 layers. You might find just that part interesting even though you will use a laser. Getting the file ready is the same process for both. Thanks so much for the great idea!!!

[@giftdiva8506]

These are adorable!

[@MakingwithMarilyn]

Thanks so much!!!

[@ginacole5708]

Thank you! Do you have a link for the earring hook you used?

[@MakingwithMarilyn]

I'm sorry I left it out. Here is the hardware. Thanks for watching! amzn.to/4eD5FXw

[@SweetArtsCustomCreations]

I love how you reused the wood from dollar and a quarter store, great idea for wood. Love all your videos. Amazing Job. I don't have a glowforge but I have Glow tendencies, lol 😊💜

[@MakingwithMarilyn]

Thank you Sweet Arts! I totally understand having "tendencies". I don't have an embroidery machine, but I have a "tendency" to watch a ton of embroidery videos:) So many things I love to watch.

[@SweetArtsCustomCreations]

@@MakingwithMarilyn I totally agree. I loved all of the designs on the earrings excellent job.

[@barbblack7825]

Soooooo adorable!

[@MakingwithMarilyn]

Thank you so much!

[@marybrown1131]

Cute! I'll have to try this with my maker.

[@MakingwithMarilyn]

I made my Maker earrings today and am editing the video now:)

[@mcfromkc7110]

They're are so cute 🥰

[@MakingwithMarilyn]

Thank you Mary!!!

[@lilyssimplecreations6634]

Wow Marilyn this blew me away. Love ❤️

[@MakingwithMarilyn]

Thank you Marta!!! It did me too:) I was so excited when I saw them!

[@LaChelle1962]

Great Video from one Marilyn to another LOL

[@MakingwithMarilyn]

Thank you Marilyn!!! You just don't come across too many of us:)

[@estell61]

Loved the video! Don't have a GF but I'm going to try it on my Cricut. I was thinking I might use the coasters and cut them out of that. I'll come up with something!😃 Great job as always!!!!

[@MakingwithMarilyn]

Working on the cricut ones now. Let me know how the coasters work out. That could be great if they work well😃

[@HeatherHunterJ]

I was excited for this and then you say you’re going to do a Cricut one for us too 🙌😮🎉🙋‍♀️💘

[@MakingwithMarilyn]

I am editing it now:) Thank you for watching, Heather!!!

[@CreationsbyKAyishaLLC]

Super cute thanks for sharing

[@MakingwithMarilyn]

Thank you Kenya!!! Working on the Cricut video now:)

[@TheShugluv7777]

Wow! They came out great!❤❤

[@MakingwithMarilyn]

Thank you RUG'l!!!

[@simplyFavoredandBlessed]

Great Tutorial!!! I’m definitely going to get a glowforge soon!!💕💕

[@MakingwithMarilyn]

Thank you for watching Fabulousis!!!

[@jessiegibson9023]

Good video thanks looks great ❤

[@PennyK54]

Love this! I too loved the sublimated pairs the best. What size did you make your earrings? TFS

[@MakingwithMarilyn]

Thank you! These pairs are 2.4 inches tall and 1.0 inch at the widest point. They are nice and big earrings. The ones I am making with my Cricut are going to be a bit smaller. I did them at 2.25 inches tall (not sure the width, but I kept the same proportions).

[@HeavenLeeMadeOnEtsy]

Nice, I have a flip flop file also. yay!

[@MakingwithMarilyn]

That is great! Such a fun little project for the upcoming summer.

[@sonyascrafts4527]

Super Duper Cute Marilyn!! Love them! ❤❤❤ I have those Same clamps! TFS #lasercuterdreams

[@MakingwithMarilyn]

Hello Sonya! I just found this older comment in a pending list of comments that were held for some reason. Thanks so much for watching!

[@sonyascrafts4527]

@@MakingwithMarilyn Wow "held" tell them don't do that lol! 😆

[@MakingwithMarilyn]

@@sonyascrafts4527 IKR? I didn't even know the list existed🙂 Had some comments in there from a year ago - ugh! Thanks again!

[@indigenousinkbeads2023]

These are so cute 🥰 your voice is so relaxing while explaining lbs some creators be talking fast n at times i be like um what did you say 😂 you don’t sell these as blanks do you?? As i see this was made 2 years ago I’d love to buy some! 😊

[@MakingwithMarilyn]

Thank you very much for the feedback on the video. My voice makes me cringe, but I think it's normal to not love your own voice. I don't do a lot of sales that have to be mailed but how many pairs were you thinking?

[@indigenousinkbeads2023]

@@MakingwithMarilyn 10-20 pairs few acrylic mirror i believe you had but mostly sublimation preferred is that a bit much lol and zip 55386 if that helps!

[@cynthiav5920]

Miss Marilyn I just love these flip flops! They turned out beautiful!…can I ask a question? I saw on 755 Media’s channel the beautiful paint palette pendants you made. Were those sublimated? They were so cute!!!

[@MakingwithMarilyn]

Thank you Cynthia! Yes, the pendants were sublimated onto a product called Unisub Hardboard Panel. It's actually the same material that I used for most of the laser cut flip flop earrings.

[@cynthiav5920]

@@MakingwithMarilyn Thanks for sharing! Love your creativity. Have a great evening! 💜

[@freebird1963]

Hello, I d/l the link file and not anything like your showing here. There are 3 parts to the FF. The toe, the strap and heel. So how did you get them to make one foot piece and strap separate. Or is it a different file set other than the linked ones. Thanks.

[@MakingwithMarilyn]

No, it is the link that I included. I made this video a long time ago, but I probably duplicated the entire design and then welded it all together to get the base. Then the strap was made out of the strap part of the file. Does this make sense?

[@TheBestUni]

❤❤

[@MakingwithMarilyn]

Hey Uni! Thank you for checking out the video!

[@FourCornersCustomProducts-4CCP]

Good morning 🙏

[@MakingwithMarilyn]

Good morning Four!!!

[@UNBIASEDLLC]

Ughhh 😑 now I need a GF!!! This is so dogon cute 🥰. TFS Queen

[@MakingwithMarilyn]

I know, so many darned things out there to make! Thank you so much for watching and commenting!

[@TYJ419]

Thanks for the tutorial and these are too adorable!. What is the name of the hooks you put on the earrings? Tracey

[@MakingwithMarilyn]

There are several color options, but here is the link. I ordered the silver stainless steel ones. amzn.to/3JQVgXg

[@TYJ419]

@@MakingwithMarilyn thank you Marilyn and Happy Easter!

[@TheBestUni]

❤️

[@MakingwithMarilyn]

Thanks Uni!

[@monicascullion4001]

Where do you buy your acrylic? Glowforge is so expensive do you know of anywhere cheaper?

[@MakingwithMarilyn]

Here is the rose gold acrylic used in this video. I got it from Amazon. amzn.to/3OcQS7n

[@debragarrett007]

Cute

[@MakingwithMarilyn]

Thanks so much!!!

[@nnulph]

What size is the actual shoe?

[@MakingwithMarilyn]

They are about 2.25 inches tall, but you could adjust them to whatever size you like.

[@latenightcraftingwithstace3009]

HEY MARILYN I'M HERE

[@MakingwithMarilyn]

Hey hey Stacey!!! Thanks for watching.

[@latenightcraftingwithstace3009]

YOU HAD TO PULL OUT THE BIG GUN FOR THE PROJECT

[@MakingwithMarilyn]

Too funny!!!