what is the difference between the demolition and the other makita that has the jammer that says chipping.
@dieselmxtt3 жыл бұрын
There are different styles and types. Some have harder packing power wich will be the heavier larger tools. Some also have adjustable impact power and speed
@dannyboy92543 жыл бұрын
@@dieselmxtt I just bought the 11 lbs makita demolition at homedepot. am thinking of returning it and getting the impact resistant since they both say 8.5 lbs of impact hamer drill
@dieselmxtt3 жыл бұрын
If homedepot has both options to rent i would try that 1st. Thats how i knew what i wanted by renting different kinds
@dannyboy92543 жыл бұрын
@@dieselmxtt my home depot dont rent tools. I just want to make sure I buy the right tool. if its giving me the same impact capacity than the hammer drill it would be a better choice. I think. thats why am asking to see which is the best
@dieselmxtt3 жыл бұрын
Ok yea that s7cks you cant rent them. I prefer the really heavy ones for more impact so cant really help you to much on the lighter ones. Also depends on what kind of jobs you will be using it for
@growproteas11484 жыл бұрын
how deep was the trench for the bamboo - i am doing the same thing!
@dieselmxtt4 жыл бұрын
I only went deep enough to install the plastic barrier plates. I bought 12in ones they also have available 18 and 24in. Drove by this jobsite after 8months of install and bamboo has stayed behind the plates i installed
@elineiamaciel65924 жыл бұрын
Aqui no Brasil usamos picareta
@AgeofKingsK69KillerRUS3 ай бұрын
Padam .. rozjebałeś mi uczucia 😂😂😂
@spacewizard693 жыл бұрын
my bit break Makita Demolition Hammer and i can't remove the bit have an idea what can i do? thanks
@dieselmxtt3 жыл бұрын
When you pull up on the plastic piece near the bit it will not release the bit?.
@spacewizard693 жыл бұрын
@@dieselmxtt the bit break inside and i can't take it out
@dieselmxtt3 жыл бұрын
@@spacewizard69 damn. That's a thick bit to break. Pull up on the part as if to release the tool. At the same time bang the tip of the machine up against some cement like a curb to see if the bit falls out. If it still doesn't come out you may be able to drill a hole big enough into the bit to fit a screw. Screw into the bit then try pulling out the screw with the bit
@spacewizard693 жыл бұрын
@@dieselmxtt thanks i will try that
@anuragdubey8614 жыл бұрын
How many price this item
@dieselmxtt4 жыл бұрын
Around $800
@AgeofKingsK69KillerRUS3 ай бұрын
Normalnie 20 minut strachu ... zależy od dzwi .. 🤔