Man Builds DIY Boat Using Fiberglass and Wire Mesh | From Start to Finish by

[@QuantumTech]

BKS Creative is a KZbin channel where you'll find a passionate boat builder sharing his journey of crafting boats and showcasing unique welding projects. kzbin.info/door/CbK1K762Au9A2r_-J673Fw

[@AbdessamadSkhirat]

❤❤❤❤❤

[@ali.abohasan]

جيد لكنه يحتاج لدراسة اكثر لان فيه نقاط ضعف

[@u60_811]

و ين حصل لالياف وهاي الماده لصنع زوارق

[@scratchsatriani]

Why are you stealing others video

[@OldDocSilver]

The blue print is contained in brain of that talented man. The satisfied grin on his face upon completion and trials is what makes this video so precious to me. Give the man a brick and he will build a mansion.

[@Anna-sv9bg]

Вроде визуально всё классно, но по сути это карточный домик, который не терпит деформаций

[@rickschneider3887]

Awesome job!! A very useful addition to this build would be to enclose the fan chasis entirely with additional chicken wire to keep debris from being pulled into the fan and protect the blades from damage plus to protect from personal injury by the moving motor parts.

[@MatsKarlsson-ih7rr]

Och

[@isasarilar1774]

Rubber wedges should have been placed under the engine connection bolts. The engine, which was placed on a poor quality platform, became even more dangerous with vibrations.

[@galleria100fuegocuidadsate4]

you meant chicken mesh?

[@rickschneider3887]

@@galleria100fuegocuidadsate4 probably so. I'm sure there is a proper technical term for the wire used on chicken coops but where I live we layman just refer to it as chicken wire.

[@развидеодима]

Главное создателя этого чуда не выпускать дальше этой речки.

[@michaelterrell4440]

Excellent job! Just would like to see more layers on the bottom with some reinforcement material to protect from rocks.

[@hw5597]

My exact thoughts while watching. The whole thing could use an extra layer or two

[@patrikcalloch7953]

bonne idée mais dans des conditions écologiques déplorables en 2024

[@jimmytaylor570]

​@patrikcalloch7953 Yes, however, he could have used the wire mesh there as well or left the wood attached 🤷‍♂️

[@joaobatistasouza5896]

A capacidade do homem persistente leva a criar suas próprias imaginação. Parabéns 😊😊

[@eko333]

Seorang pria yang membangun perahu DIY dari awal hingga akhir menggunakan fiberglass dan kawat jaring menunjukkan betapa kreativitas dan ketekunan dapat menghasilkan karya yang luar biasa. Mulai dari perencanaan desain hingga proses konstruksi yang teliti, proyek ini menantang tetapi juga sangat memuaskan. Dengan bahan-bahan yang relatif sederhana, ia berhasil menciptakan perahu yang tidak hanya fungsional tetapi juga memiliki daya tahan tinggi, membuktikan bahwa impian membuat perahu sendiri bisa menjadi kenyataan dengan dedikasi dan keterampilan yang tepat.

[@handikeramikdinoyomalang7587]

harga berapa ketemu nya

[@taterzsalad9252]

3 screws holding that fan mount at the rear is a death wish.

[@ewaldmaas5790]

I love these kinds of builds. Great stuff. I build a lot of fishing canoes in West Africa myself. All the polyester used on this project won't last long in the water. With only one air chamber, the polyester will start rotting from condensation. A small leak between layers and the boat will sink. We always foam the inside to make it unsinkable.

[@Svbellaluna]

They used epoxy not polyester

[@MrGentlebutfirm]

Polyester does not rot!

[@ewaldmaas5790]

@MrGentlebutfirm, please be aware that the material deteriorates rapidly once delamination begins in saltwater. While it may not completely dissolve, it will disintegrate. Fortunately, repairs are part of our company's services.

[@MrGentlebutfirm]

@@ewaldmaas5790 Please explain the break down steps more carefully, so I get your message! Why would the laminate be prone to delamination? Polyester even - and epoxy too are rather water resistant. So what is so bad about condensation?

[@ewaldmaas5790]

Small boats made of polyester are built in layers. These boats usually have a wooden construction covered with polyester. If the first layers are damaged, water will seep into the layers. Polyester also doesn't do well in hot environments because it's not very flexible. In a factory setting, a boat is made entirely of polyester in a controlled environment, so the results are much different. But even then, it doesn't like West Africa very much. Epoxy works better but is very expensive. We only use it for certain repairs and protective topcoats.

[@shanemconie7946]

theres alot of clever people in this world and brother you are one of them

[@AVZNANIYA]

Слава Создателю , за таких прекрасных и способных людей , которые делятся дарами вышних! Всем благ на пути познания)

[@VasiliyBogdanovich2022]

хороший рыбакакос получился --- адская мясорубка. ....

[@AVZNANIYA]

@@VasiliyBogdanovich2022 нормально)) на открытой воде можно зажечь по полной))

[@VasiliyBogdanovich2022]

@@AVZNANIYA --- да при наличии опыта и на малых реках катаются на таких -- просто винт должен быть закрытый сеткой.. иначе поскользнулся и придется вышей родне икать вашу голову на дне водоема ...

[@AVZNANIYA]

@@VasiliyBogdanovich2022 сам факт технологии , забытое , старое)))) думаю доработают))

[@VasiliyBogdanovich2022]

@@AVZNANIYA -- ну не знаю у нас в Восточной Сибири таких полным полно, на них по малым горным рекам на рыбалку и охоту народ передвигается ...

[@DadiMohcine]

Thank you for sending me this wonderful video, my dear friend. I enjoy these techniques, which are wonderful and very beautiful. This innovative thing is also my hobby. Thank you very much, my dear brother.

[@RestorationGirl]

very good work!

[@leonbernardaziza2326]

Grand problème de résistance structure pour la liaison des flotteur avec l'ensemble de bateau et de l'habitacle du bateau

[@jesuschristt7692]

Bot

[@patrikcalloch7953]

bonne idée mais dans des conditions écologiques déplorables en 2024

[@philipcrossley1279]

Well done. Please make a safety cage around the propeller.

[@MANREBEL9]

*Дно тоже следовало бы усилить. Случаи всякие бывают.*

[@kkutube1972]

They live in a world where stupid people get punish. If you are dump enough to swim around a propeller, you will be punish for being stupid. Only people that grows in such a location would understand.

[@TheEdekpl]

@@kkutube1972 zyja w swiecie minimalnych ograniczen ! im, nie potrzebne sa pasy by przejsc na druga strone...(jak tobie) balwanie...

[@TheGryxter]

I am truly impressed at how awesome that came out. I'll be without the motor that thing was light as a feather! BRAVO!!!!!!

[@petermccracken2247]

IMPRESSIVE !!!!! 👍👍👍👍👍 This would be the idle boat for a cruise on the river. Well done.

[@artvictor5044]

The man that create that DIY boat was really a genius? Amazing?I love that stuff!!! 😍😍😍❤❤❤👍👍👍😊😊😊

[@AminDk-p9t]

شكراً لك انت عبقري فكرة جميلة جدا وغير مكلفة

[@ahmedelmarzouki8332]

من يعرف إسم للسلك الدي إستخدم

[@rickgreen2182]

Pretty cool Some ideas -- based upon my needs. This builder did great on his. Stuff the pontoon tubes with plastic soda pop bottles. It will provide bouyancy in case of a puncture. Each two liter bottle provides 4 pounds of bouyancy. Also if you can - baffle the pontoons into three compartments for same reason. I was impressed with the propellor making and set up - but i could utilize a standard outboard motor better. Simply reinforce the stern board and a backing plate. It also provides greater internal space. That would simplify the entire build. Id use marine wood as stringers for mor comfortable flooring. Perhaps internal width to match standard flotation boat cushions. You could epoxy in lifting points for a crane hoist... and also add in mountings for a bimini top. Im wondering how many layers would be necessary for rough waters. I could see a thin layer one breaking up in waves. All in all nice build!

[@sammyrothrock6981]

Brilliant idea!! Hand crafted with minimal materials and cost! Labor intensive but very satisfying when completed! Kudos to a job well done! 👍

[@candidobizzotto2038]

Only the mass production can GRANT the minimum use of resources. Congratulations for your hability to reproduce complex structures with simple materials.

[@michaelgrabowski467]

Fantastic! Thanks for making this epic tutorial and sharing your skills and knowledge! Love the boat! Peace to the World 🙏 🏴󠁧󠁢󠁥󠁮󠁧󠁿 🇬🇧

[@10532412]

Excelente!!!!La necesidad es la madre de toda inventiva y creación .

[@bigred8438]

Absolutely brilliant. High level of ingenuity.

[@jeeffeehcross1334]

Muito legal, parabéns pela engenhosidade.

[@RestorationGirl]

What a hard work he does for us

[@СергейМельников-ц3е]

Лодка лёгкая и наверно быстрая, но если бы труба была заполнена пенопластовой крошкой или каким нибудь вспененым материалом вроде было бы надёжнее.

[@БогданМельник-л3ь]

Вообщем к многим узлам и ко всему есть вопроси, как то он много колхозил во время работы, можно было получше сделать если би он мозгы включал бы, но видно что не особо деньги в мужика водятся даже на такое, но не плохо получилось даже красавчик

[@ЕвгенийКаравайкин-п1я]

А ничего, что закон Архимеда не так работает?😂 такая форма нужна для жёсткости надувной конструкции, если конструкция не надувная - бред сивой кобылы. Огромный полезный объем судна потерян, а дополнительная масса приобретена. 😂😂😂

[@СергейМельников-ц3е]

@@ЕвгенийКаравайкин-п1я где вы здесь узрели Архимеда, остроумный вы наш? Вы вообще в курсе какое отношение закон Архимеда имеет к форме предмета? Или вы это ещё не проходили?

[@ЕвгенийКаравайкин-п1я]

@@СергейМельников-ц3е закон Архимеда позволяет судну держаться на воде, это раз, как он работает вы не знаете, это два)))надувать или чем-то наполнять жесткую конструкцию не нужно, а вы видимо абсолютно не умный раз не смогли уловить суть моего коментария

[@АндрейГолубятников-г2з]

Ну да😂

[@BiraQuintanilha]

Verdadeira obra de arte Excelente profissional Ótimo vídeo 💯👍

[@RestorationGirl]

Bravissimo, sei il TOP 1

[@MANUELJOSE-j8c]

The smartest thing that should be on everyone's mind right now should be to invest in different streams of income that are not dependent on the government. Especially with the current economic crisis around the world. This is still a good time to invest in gold, silver, and digital currencies (BTC ETH...)

[@MANUELJOSE-j8c]

A lot of people still make massive profit from the crypto market, all you really need is a relevant information and some professional advice.

[@MANUELJOSE-j8c]

No I don't trade on my own anymore always required help and assistance

[@MANUELJOSE-j8c]

From my personal financial advisor

[@KevinBrown-i4w]

YES!!! That's exactly her name (Mrs Jenny ) so many people have recommended highly about her and am just starting with her from Brisbane Australia 🇦🇺

[@AneteXible]

I'm surprised that this name is being mentioned here, I stumbled upon one of her clients testimony on CNBC news last week

[@gavrilnikiforov2373]

Гений. Молодец. Не ноет сам все сделал. Мужик

[@VasiliyBogdanovich2022]

хороший рыбакакос получился --- адская мясорубка. ....

[@VasiliyBogdanovich2022]

там только музыка . .и если ноет то по китайски ...

[@patrikcalloch7953]

bonne idée mais dans des conditions écologiques déplorables en 2024

[@user-ztghR65Dtsk]

В каком месте молодец? Мне, как инженеру-конструктору больно на это смотреть. Ни образования, ни элементарных знаний. Винт сделан на глазок. Вы лично, что-нибудь слышали о профиле винта? А как реализовать его точное исполнение в домашних условиях? Человек построил из говна и палок. И я надеюсь, что это его не убьёт и не покалечит. Защитной решётки нет. Крепление конструкции вызывает сомнения. А ещё я как дипломированный материаловед могу сказать о том, что стекловолокно очень специфичный материал. Не терпит воздуха между слоями. Соответственно без вакуумной установки не обойтись. И ещё не терпит переменные нагрузки и вибрацию. Трещины пойдут. А потом винт, а он толкающий, упадёт на этого самоделки на и порубит на куски. Начиная с головы.

[@stuartarneaud218]

Wow great job 😮😮

[@alekseysmirnov7405]

Excellent!

[@corsarionegro1111]

Guauuuu, que maravilla de trabajo que ha echo este muchacho, lastima que en España no nos dejen hacerlo, lo haría encantado. Una magnífica barca para salir de pesca

[@mikenevils8741]

You are a trooper professional sir. I love your work. I think you did a fantastic job.

[@naumansayal5783]

Hats off to your dedication , improvisation and hard work. Dont stop here buddy..Do keep the safety tips and suggestions in mind. take care

[@한잔하개-f7s]

보면서 대단하다는 말이 몇번이나 하게 됩니다.🎉🎉

[@patrikcalloch7953]

bonne idée mais dans des conditions écologiques déplorables en 2024

[@ДмитрийСичинский]

Без синей изоленты как то не надёжно выглядит, а так да получилась гроза местных крокодилов)

[@RestorationGirl]

For machines to run smoothly, the parts must be perfect.

[@Dereazar]

@@RestorationGirl именно для этого и нужна синяя изолента, она является символом качества.

[@denisbibik]

​@@Dereazar Я бы всю лодку синей изолентой обмотал и лопасти винта в том числе. Только синяя изолента, везде и всегда

[@Dereazar]

@@denisbibik аминь!

[@ТурунтаевАндрей]

Изолента изолентой , но скотч еще никто не отменял!😂

[@christopherromina5445]

Cool boat

[@mauroangioli4819]

Sei stato davvero bravissimo a costruire questa imbarcazione. Complimenti davvero. Se posso darti un consiglio mettiti una rete di protezione attorno all' elica perché è molto pericolosa quando funziona, così eviti che tu o qualcun'altro vi facciate male in modo molto grave. Un caro saluto dall' Italia con affetto Mauro.❤

[@ЛюбовьБарановская-з7р]

Молодчага🤝🤝🤝 здорово👏✊👍 так держать✋✋

[@samueljones9468]

I wasn't impressed until he made the propeller. Wow that was over the top

[@АльбертСултангулов-ю1о]

Молодец руки растут от куда надо как говорится начало есть , будет и по круче ложка. 👍👍👍

[@user-ztghR65Dtsk]

Руки из жопы растут. Знаний на нуле.

[@offeny672]

Amazing my friend❤

[@Ιατροδικαστής-Νικος]

DIY dari awal hingga akhir menggunakan fiberglass dan kawat jaring menunjukkan betapa kreativitas dan ketekunan dapat menghasilkan karya yang luar biasa. Mulai dari perencanaan desain hingga proses konstruksi yang teliti, proyek ini menantang tetapi juga sangat memuaskan. Dengan bahan-bahan yang relatif sederhana, ia berhasil menciptakan perahu yang tidak hanya fungsional tetapi juga memiliki daya tahan tinggi, membuktikan bahwa impian membuat perahu sendiri bisa menjadi kenyataan dengan dedikasi dan keterampilan yang tepat.

[@markedebevoise3300]

Very talented sir, great video. Enjoy your homemade boat 😎🤘

[@profanepunk]

Thank you for uploading the video😮 that looks like fun building

[@richardharrold4357]

Absolutely well done.

[@samisosa9105]

Absolutely brilliant!

[@vancedixon8870]

Awesome build from start to finish, love it bro 👍👍

[@josebasualdo8614]

La verdad te felicito, sos un genio, bendiciones!!!

[@memres84]

Wonderfull and creative work👏

[@紫月-u3e]

Experts among the people

[@Marcus-p5i5s]

cool boat!!

[@Nathan-yy2xs]

That's cool

[@HiTechDiver]

Very Impressed !

[@lysdexsick]

now , let's watch it Sink Extremely quickly!!!!

[@luisgutierres3436]

eres un genio ojala ubiera jente haci como usted tan inteligente aca en perú

[@petecommanche9344]

OUTSTANDING!

[@donlew8222]

I'm carving out some wooden propellers now!

[@brojonathanjones5195]

Such a fun project and great job !! When I realized he was building an airboat,I had had big doubts for several reasons.Upon completion, and for what he is building,I think this is a superior build (small) but more stable than the airboats we used in the Florida Everglades.The lower center of gravity is a MAJOR plus.He def needs to cover that prop cage.A small piece of hard debri will make that wooden prop explode into deadly splinters. I think its brilliant tho.

[@oogoldyooimvu2548]

Great little project. 👌

[@svetlanatiptsova539]

Master👍

[@pierolefebvre5302]

Very Good idea, 👍 I love the model is fantastique 👍👏👏😀🇨🇦.

[@waltermattei5994]

Love it

[@jtropical4615]

Great job perfect😊

[@khaledbahri5003]

❤❤❤wow

[@way2g619]

Awsome diy

[@GelWag]

The best channel 👍

[@ROADKILL4147]

nice job and surprised not using a roller 😎😎

[@scuttdamutt]

Awesome job.

[@sixoffive]

Impressive work, it looks fun too.👍

[@NoBody-xx6ii]

EXCELLENCE

[@billsimpson2392]

Great job

[@michaelmello9510]

Great job 👍

[@alandolan2182]

Nice job

[@guerreiros649]

É fantástico ver a criatividade do ser humano. Como descrever a sensação de criar algo do nada e depois desfrutar do trabalho realizado. Deve ser incrível! 🤨

[@johnfleury5430]

You are a master of ingenuity

[@danielf7055]

Awesome job very impressed thank you for sharing

[@ErichViehoever]

Ein wahrer Künstler wow

[@aliposhtpazan2625]

Very easy method very useful method. Many thanks for the idea

[@raleighparker7046]

I wish I could speak your language, you are a great boat craftsman, screw any negative comments you may get, I’d just like to talk “boats” and techniques with you for a couple days, I have a hull made but just can’t decide where to go,with it yet. By the way, I’ve used epoxe resin this far, what is your thoughts on using polyester resin on the inside???? Have you ever done this? Did it hold up or does poly not bond well epoxe??? I know what all the books say and what people may spout off….im curious what a real boat craftsman might say.

[@rikunevalainen8154]

I have done small and big glass fibering jobs for boats several decades: EPOXY will bond to the polyester laminates, if it is old and fully cured. Always use the same resin through the new laminates, if possible. For polyester laminates use polyester based TOPCOAT for smoothing the outer layer, but when cured, you may later use EPOXY PAINT or POLYURETHANE paint over topcoat, but make sure TOPCOAT does not contain WAX ! Then you need to wash it with ACETONE and use at least one epoxy layer before ANY OTHER paint. IF you can afford, use only EPOXY for laminating, EPXOXY for primer paint, POLYURETHANE paint for final layer. Reparing old laminate: most secure way is to use EPOXY system, if you use POLYESTER resin and cloth to repair old POLYESTER- GLASS structure, it will be weaker than using EPOXY repair, so you would need to use MORE polyester resin and glass than with the epoxy repair. Ask more from your local boat repair shops. IF any doubt: USE EPOXY

[@phanzilzakirov2520]

Like 👍👏

[@RestorationGirl]

I wouldn't mind if this lasted hours. I enjoy watching

[@JimDog794]

Nice boat you are very talented

[@gimigimi1299]

Gotta love the no glove technic😮

[@cyprussianbakulu6760]

..помню ещё 50 лет назад в Куйбышеве(Самаре) так делали даже большие яхты..

[@user-ztghR65Dtsk]

А профиль винта также? На глазок? Просто интересно, кого может восхитить эта гаражная поделка.

[@cyprussianbakulu6760]

@@user-ztghR65Dtsk ..в Куйбышеве и самолёты делали..и танки..Неужели "на глазок"??

[@user-ztghR65Dtsk]

@@cyprussianbakulu6760 Вы же сами сравнили ЭТО с самарским производством. Вот мне интересно стало. На производстве или в гаражах для себя?

[@cyprussianbakulu6760]

@@user-ztghR65Dtsk если учесть ..что что-то по возможности можно было скомуниздить с работы--то и в гаражах можно было сделать всё что угодно))

[@poppetrurazvan3900]

Hi. Do use a mosk to prevent acetone inhalation. FANTASTIC.

[@СартеникСаргсян]

Очен интересно и очень красиво лотка,ну я шоке,это какой бумаго боло что вы клеили, она посли клей как крепки желез😮

[@Wolfgang_Taurus]

это не бумага а стеклоткань, пропитанная эпоксидной смолой

[@almahyra2079]

Sangat bagus sekali cara pembuatan nya, sedikit kurang kuat untuk rangka tengah. Harusnya di kasih rangka baja ringan... Terima🙏😊

[@gedenawi5892]

Mantap ni kepingin juga buat untuk mancing nanti

[@michaelluzzi3605]

Genius!!! Needed him on Gilligan’s Island! Professor could have made resin from coconuts 😁👍!!Awesome vid! Will make an attempt to build my own!

[@diving600]

Very good you can do it

[@user-rg5kh1sy1x]

Молодец!

[@Kaka-Alddy]

Wow... Keren banget

[@ДимаКоганов]

Шедевр!!!

[@hasanakkaya3831]

Ne yetenekli insanlar var.

[@johnhagemeyer8578]

Thank you

[@marcuscicero9587]

that boat scoots and has great maneuverability. guy gonna have him some fun.

[@ВячеславСысоев-о9н]

Super 👍👍👍

[@jorgefranco4618]

Sensacional parabéns 👏👏👏

[@mdmssbsafety-x2b]

very creative

[@washingtonwas6018]

Muito criativo, faltou colocar tela na carenagem de proteção da hélice por segurança

[@zavhoz_rus]

WOW 😮