Isometric Views Problem 2

[@jeremiahtunjigoldadebowale4854]

I am an engineering drawing teacher, watching your videos gives me better ways to teach my students. Your approach is simple. Thank you.

[@ManasPatnaikofficial]

+Jeremiah Adebowale Thanks a lot Jeremiah... Glad to know you are also an engineering drawing teacher and that my videos are helping you in a certain way.......

[@sroydetroy6404]

@@ManasPatnaikofficial Hi brother first of all your work is amazing. Can I ask you which software/program are you using?

[@ManasPatnaikofficial]

This is AutoCad

[@sroydetroy6404]

@@ManasPatnaikofficial Thank you very much!

[@grovestreet9165]

I didn't even attend any lecture of isometric view and my friends where saying you can't solve a single question of tut sheets but after watching 3 videos of your channel i solve all of them without any help of others thanks you sir You know sir how to teach

[@ManasPatnaikofficial]

Hi... I am sure these videos are helping you learn... All the best and do let your friends know about this channel so that they can also benefit.... Keep Going Man.....

[@anilrajput1335]

No one teached me so clearly, thanks sir. Keep it up !

[@radhavarshitha9315]

Interesting..All my fears about this chapter are gone now. I can try these sums.Thanx a lot bro...

[@ManasPatnaikofficial]

Hi Radha...... Thanks for appreciating my work... And do share this channel with your friends, juniors and classmates so that all can benefit. All the best...

[@ritienmohan661]

BITS Pilani student here thank you so much this helped a lot

[@owamandayimsomi1244]

I’m writing technology tomorrow and I’m getting a lot of information and better understanding 👏🤝

[@matttristanmiro914]

Thank you sir for the playlist of isometric problems. I have really benefited from your videos by making the isometric firs from your given orhto then checking my draw to your video if it is correct. Next playlist that I would watch would be turning iso to orhto. Thank you very much Sir. You are a great teacher!

[@vaishaliyelmule2102]

Thank you so much sir for making all my concepts clear on this subject.

[@venkymonkey6663]

I like your hard work and patience to make a video sir

[@balaboinakoteshjngp8934]

Excellent sir and I think you know CAD well why don't you make videos on CAD sir

[@sakashamsharma2056]

Sir how will the isometric view will look if we had given 3rd angle projection

[@AnkitMishra-lp6qp]

Your tutorials are amazing...Thank u so much sir

[@mightymemes412]

I thought there were only 30 and 60 degrees when dealing with isometric drawings sir

[@parthsharma7146]

Best teacher on yt

[@devanshkumar1542]

TYSM SIR !!!!!! YOU ARE THE TRUE GOD. plz reduce the numbr of ads sir.

[@lindawang314]

I really appreciate you sir you are excellent teacher!

[@shubhamrana3733]

Very nice sir i will see ur most of the vedios instead of understanding by book.....and i can eassily understand the concept that you are shown in ur vedios...... thanku sir.....god bless you 💗

[@deathstorm7464]

thanks sir . sir please explain some more problems of isometric projections and orthographic projections

[@ManasPatnaikofficial]

ya sure Ajad I will do that in the near future.....

[@im_basitali]

Isn't there another way to draw its isometric view in which its steps (of figure) are faced backwards, i mean exchanging 75 mm axis with 100 mm axis... Please sir do reply if you get it... And if we can draw would it be legal to draw in examination....

[@dhatrishdixit6004]

ya i think bro it would be completely legal

[@himanshusahu5136]

Thank you sir for making this videos they are really help for me as well as my all friends 😊

[@kaushiknaik4872]

how can breadth be greater than length ??

[@hemanthreddy7335]

If u feel bored, just flip the drawing upside down. It's like an optical illusion 🤯😵

[@osamakhaled2242]

Thank u sir you're doing a great favour to us

[@ManasPatnaikofficial]

All the best....... Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@sohansom]

Really nice Sir!! 👌👌

[@dannyprof9466]

Easy way of doing my homework thank you

[@ManasPatnaikofficial]

Hi Joyce....... Thanks for appreciating my work.... All the best in life... And do let your friends know about this channel so that they can also benefit....

[@laxmiputta7963]

Should we represent any dimensions to this isometric views?

[@adwitiyamaity6636]

Please solve this question...this question from N.D.Bhatt. ....page number 422...Problem number 17-5.... THE FRONT VIEW OF A QUADRITERAL WHOSE SURFACE IS PARALLEL TO THE V.P. IS SHOWN IN FIG. DRAW ITS ISOMETRIC VIEW.

[@rizwanabegum6869]

Nice sir it is really very helpful plzz keep going and a request can u explain this in iso to ortho projection

[@saikatpaul6576]

Thank you...I was confident in 3D plm interview

[@bharathsurya188]

How can we find what is a front view and wat is a top view without specifying

[@mdnizamuddin9505]

can you please show isometri projection of stairs without side view I cant draw it with top view and front view

[@sahilkhandelwal6638]

Could u tell that why u had not use your 1 video method in this one

[@442kallurisravya4]

First we have to draw top view or front view sir??

[@Lightyagmi3151]

Sir can you make videos on other subjects like v.c.l.a , b.e. , physics, e.m.e.

[@saijaswanthasapu31625]

can youdraw isometric views by drafter

[@vatsalparikh633]

Sir could u upload ur files so that we could download them

[@emiolaodunayo440]

Sir, how can I get practice questions or which site will you recommend to me

[@saikatdas8069]

Yeh 1st angle hai ya 3rd angle hai

[@girishgsgummanur7882]

how to draw cutout in isometric projection

[@rajakula9942]

Sir if questioner may give top view and front view. From which side we should draw front view in isometric drawing... Please rectify this mistake i lost many marks...

[@nobody00031]

preety much technique....and i love it

[@ManasPatnaikofficial]

Thank u kailash

[@sahilmulani4913]

Sir please give more problems of isometric projection.

[@sumitmehra5119]

sir where is the projection topics these are only views???

[@panthaganihemanthkumar2704]

Nice tutorial

[@thodamastithodagyan300]

Very nice👍👍 Sir.

[@ravichandran1010]

BEautifully explained , Thanks so much!

[@ManasPatnaikofficial]

All the best. 1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik

[@SimonBarnsley]

There are some on youTube who scale the sides by approx 0.8 Why is not necessary in this instance? Sorry to ask but I am confused and cannot find the answer.

[@faisalsayyed3155]

Simon Barnsley those are isometric Projection...this is isometric View...isometric view uses true scale... where as ismoetric projection uses ismoetric scale which is 0.8 multiplied by true scale...please correct me if i am wrong

[@ManasPatnaikofficial]

Faisal is spot on.....

[@SimonBarnsley]

sayyed faisal Thank you. Yes I understand now.

[@anudeepkoneru5311]

Awesome videos patnaik keep it up 🤨🤨

[@avanidinesh6772]

how can we identify the visible lines from all these isometric lines and darken them ???

[@shivasai6327]

Sir can you explain how convert isometric view to orthographic view

[@ManasPatnaikofficial]

Watch all videos in this playlist: kzbin.info/aero/PLIhUrsYr8yHwe_ZgziK4FJIx4fmBJEkIL

[@shivasai6327]

Manas Patnaik ok sir

[@j3epandey155]

Angle is 120 degree then how It is true length

[@NandiniRamani-h3m]

Thank you so much sir for this video

[@ManasPatnaikofficial]

All the best 😀Do share this channel and its playlist with your friends. 1. Engineering Drawing Playlist (ENGLISH): kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing Playlist (HINDI): kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics Playlist (OLD): kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Engineering Mechanics Playlist (NEW 2023-2024): kzbin.info/aero/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP 5. Mechanics of Solids Playlist: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 6. Theory of Machines / KOM / DOM Playlist: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 7. AUTOCAD Playlist: kzbin.info/aero/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G 8. Machine Drawing Playlist: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics. Second Channel for Hindi Audience: @btechplus Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc

[@unpluggedcoversongs2648]

Thanks

[@nageshwar6463]

ur really awasome

[@ManasPatnaikofficial]

Thanks Nagesh for appreciating my work.Do encourage your friends also to subscribe and learn from this channel.....All the best in life.....

[@karthikreddy8531]

sir what will happen if we draw only the top ,front views in isometric view without darkening them

[@ManasPatnaikofficial]

Kartik... And as far as your question is concerned "What will happen if we draw only the top , front views in isometric view without darkening them"... It's like the line which is visible are to be darkened (say by an H pencil)...whereas the lines not visible in that isometric view shall be left as it is....Ok...Initially, prepare the entire drawing by a 4H pencil....and then you can go ahead and use H pencil for further enhancements........

[@prashantkumar1862]

Hindi me video bheje

[@vishnuvikraman2169]

Well explained

[@Bighappyboi999]

Thanks a lot brother

[@chinthakuaswanichinthakuas179]

very good

[@bhartirawte2844]

Sir orthomatric mere se nai bn rha h

[@saurabhdhole4649]

Sir shhet pe samjo na orthographic or isometric please..

[@kishorkumartablistsalur8347]

Why don't we take 100cm on right side? and vice versa?

[@hirenthakkar7462]

plz explain more problems sir

[@gudivadaganesh2752]

Sir once write a line wrtie a line length sir.

[@vinaykumar-cp4jd]

I want engineering mechanics pdf plz sir

[@vinaykumar-cp4jd]

Request sir

[@fanofmsd6498]

Thankyou so much sir

[@arshadkhoso1921]

good sir

[@kirankumarpalli8603]

Thank u sir..

[@tirunagarisreevani754]

tq sir . thanks a lot

[@ManasPatnaikofficial]

Sreevani...Thanks for appreciating my work.... All the best in life And do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....

[@nishakaushal948]

sir can u pls make videos on axonometric and oblique drawings

[@opavankrishna7424]

Sir why don't you teach in a drawing sheet..

[@bhargavshiroya6309]

Because autocad is way more better than traditional drawing sheet

[@opavankrishna7424]

Sir I am not able to understand some points .

[@krishangopal5027]

Krishan gopal

[@truesolution6069]

OK! .................. OK!........................ OK!................... FINE................... FINE!............................. OK!

[@statusmultiverse_t]

U teached well but

[@rahmanmohd9078]

Thankyou.

[@rajuchakravaram242]

Bro who to know that which can be visible and invisible

[@ayushsaxena7770]

by imagination and practice.

[@SaiKumar-qi5ky]

raju chakravaram it

[@SivaRamaKrishnaNallajarla]

Everything is good but sound quality not good in video😀😀😀

[@surendraverma3105]

i have a problm can mail you

[@ManasPatnaikofficial]

+surendra verma [e-mail] You can mail me, but i cannot promise to reply you quickly......

[@sarthakpal6010]

Sir make a video with side view also pls

[@ManasPatnaikofficial]

Its already there sarthak....search the playlist on my channel page...

[@himabindu5447]

Thnq sir

[@ManasPatnaikofficial]

Hi Hima.......... Well Thanks for appreciating my work... All the best in life And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401 Small contributions can make a Big Difference

[@syakinasyuhada2494]

Make more tutorial, you help a lot👍👍👍

[@aswinkumar4712]

Tnx sir

[@ManasPatnaikofficial]

All the best. 1. Engineering Drawing (English) : kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing (Hindi) : kzbin.info/aero/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Mechanics of Solids: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. Machine Drawing: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w 7. Engineering Services Examination_Engineering Drawing_Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/aero/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Physics Channel Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q My AMAZON Store - For all you students. www.amazon.in/shop/manaspatnaik

[@anupshirgaonkar7179]

Thanks 👌👌👌👍👍👍

[@generalinfoabidhassan146]

thnxxx

[@generalinfoabidhassan146]

soo good.....

[@ManasPatnaikofficial]

Hi Abid...... I am sure these videos are helping you learn the concepts... All the best and do let your friends know about this channel so that they can also benefit.....

[@generalinfoabidhassan146]

y not??

[@elsonwilfred85]

Thank u so much

[@mullapudijyothirmai9694]

Elson Wilfred

[@Junnugadu]

thank u sir

[@ManasPatnaikofficial]

You are welcome sangeetha.... And all the best

[@navyanthanam6970]

Sir use a paper or board for drawing not on system

[@ManasPatnaikofficial]

Thats outdated style of teaching..... My way of teaching drawing is different

[@manjubala9303]

sir you are now extremely slow

[@artisharma9204]

🙏💕

[@villain_16]

uff...ad._ad._ad.😤

[@reddeppanageli1983]

Thanks

[@manojkasture8749]

Thank you so much

[@rameshbabu37999]

Thank you very much

[@billalhussain7383]

Tnq sir

[@Junnugadu]

thank u sir