Mancing Udang Galah Strike Penyu Sungai‼️ Bersama Pak Agus Ramdani (PT.MJM)

[@Anjar.M]

wani behujan angler nya ih.hehe

[@MustaqimMuhammadHatta]

Tenang bosque... ada atapnya.... 🤭

[@AnitaPutri-oo1kt]

Alhamdulillah.... Makan udang galah lagi 🥰

[@MustaqimMuhammadHatta]

Ingat kolesterol... 🤭

[@ieardjandi673]

Hasil yg lumayan bagus Om Mus,, mantaaappsss 👍👌😀

[@MustaqimMuhammadHatta]

Alhamdulillah... Rejeki... 🤲😊👍

[@yt-noob6122]

Bah asik bnr langsung disanga imbah kolehan😂

[@MustaqimMuhammadHatta]

Menstabilkan kolesterol... 😁🤭

[@sigondrongfishing]

Mmyamm ..mmyamm...pegennya mancing kaya begitu..

[@MustaqimMuhammadHatta]

Hee... mumpung lagi musim udang galah... 😃👍

[@Losdol4646]

Mantappppppp!!!

[@MustaqimMuhammadHatta]

Hehe... terimakasih kawan 😁👍

[@federicoandresechenique7490]

HOLA, ME GUSTA TU CANAL ES POSIBLE, PONERLE 1 MOTOR DE MOTOCIVLETA 1150, 125 A UN BOTE LANCHA QUE REALIZA USTED ? SALUDOS

[@MustaqimMuhammadHatta]

125 cc son aproximadamente 8 HP, y esta nave usa 7,5 HP y aún es demasiado débil, esta nave usa un mínimo de 15 HP para alcanzar la velocidad deseada. 😊👍

[@neilfromclearwaterfl81]

@@MustaqimMuhammadHatta You might get by with a 125cc or 150cc if you had the correct size and pitch propeller. You would also have to work to get the thrust angle of the propeller shaft optimized. Some might be surprised at how big a difference just a few degrees change of the thrust angle can make. Best!

[@MustaqimMuhammadHatta]

with a 7.5 HP engine it only gets a speed of 5 knots. maybe because the lower front of the boat isn't raised enough, next project, I'll study it again 😍👍

[@neilfromclearwaterfl81]

@@MustaqimMuhammadHatta With the plastic drum material it also looks like its difficult to get the boats to be fair and true between the ribs which reduces your top speed. You might consider rails going the length of the boat through notches in the ribs to help keep the hull flatter and more true between the ribs. When making thin plywood, bark or skin boats, kayaks or canoes the fairness of the hull also becomes a problem due to the thin flexible material so the design of the skeleton to support the skin becomes more critical than on a boat that uses planking for its hull skin. Best!

[@MustaqimMuhammadHatta]

that's absolutely right, maybe I'll try to build the frame first, then put the plastic down after 😃👍

[@alfiankristanto5719]

Iwak tikusan

[@MustaqimMuhammadHatta]

Ohh... gitu ya bang... ikannya enak gak itu bang???

[@alfiankristanto5719]

@@MustaqimMuhammadHatta goreng kering enak bang

[@MustaqimMuhammadHatta]

Oke deh... nanti kita coba,,, masih dikulkas... 😁👍