LEGO Star Wars 75325 THE MANDALORIAN'S N-1 STARFIGHTER Review! (2022)

[@MandRproductions]

Will LEGO ever make a Dark Saver mold? Will the instructions ever go back to their former glory and stop looking like cheap knockoffs? All these questions and more (probably never answered because LEGO Star Wars team doesn’t answer questions we care about).

[@landini9041]

Why is this the epitome of LEGO nowadays. Makes me sad to see a company that I want to do well not do well because of their employees . 🥲

[@AvatarEli]

yeah it seems lazy, lego harry potter makes a lot of new stuff why is star wars so hard😒

[@CanadaBricks]

“We never cut corners for costs” *So that was a f*cking lie*

[@hoarder66]

@@landini9041 we should all go work for Lego. Imagine the sets we would get if we were the ones designing them

[@vampiresquid74]

Even a black katana would be better. Not correct at all, but still way closer

[@daveh1294]

It's totally accurate to that episode where bald Mando forgets his cape, has to borrow a different jetpack, and waves a black stick around in frustration. The same episode where the N-1 wasn't finished and before it was polished up, and they'd forgotten to paint the underside. The attention to detail is remarkable.

[@Brandonssmallengine]

I laughed to hard at this. I think that was chapter _ of Book of Boba Fett right???

[@AliKenobi]

Ahahahahaha reward this comment

[@cameron2900x]

@@Brandonssmallengine it was the eighth episode silly 😝

[@Brandonssmallengine]

@@cameron2900x my bad

[@catierose3647]

AND the engine has 3 pipes for airflow and the set only has 2 that annoys me soooo much

[@legacyrift3079]

Honestly, it IS very annoying when designers do stuff that is just completely off/wrong with a set, but whenever Ryan says "only the best is good enough" to something in the set, I just start bursting out laughing 😂

[@annabellethedoll3764]

Well, “only the best is good enough” has became one of his most iconic phrase… from Lego of course.

[@CMDRturner]

This is facts

[@SpunkyGo0se]

It's funny seeing MandR getting so pressed and losing his mind over the color of LEGO bricks lol

[@caylumking901]

And people (especially on reddit) get so mad at him. Like he's not wrong? There's a lot of compromises in quality wile they're also raising the price.

[@Brave_Sir_Robin]

It just doesn’t capture the “sleekness” of even mando’s cobbled-together N1 in my opinion. I definitely think this could be sent back 15 years and not look too out of place.

[@tompatchak8706]

Sleekness no. Garage car? Yes

[@cenedrilbUild]

true, the bubble of grogu stands more out, the 2 blasters are way closer to each other, the wings arent straight but have a decent ankel downwards and the front of the two engines is just bahhhh :/ if u wane see an more acurate UCS version feel free to check out mine, ( 8th latest video...)

[@michaelpowis]

I think the front fuselage needs some more tiles & slopes. Would look way sleeker then

[@murrkat6148]

What was needed was the shiny silver pieces and the design so it's completely smooth on the wings. 100x better and lastly all silver and not dark gray.

[@mattswank]

Yeah the proportions are horrendous to what it should be but oh well.

[@RoscoeWasHere]

They included the tan/orange piece on the bottom as an homage to Luke's Landspeeder just to troll everyone.

[@depressedpumpkin7290]

My biggest qualm with this set is that it's not all tiled and sloped off. The N1 starfighter is one of the sleekest ships, and when you're working in that small of a scale, studs make the surface look textured and greebled. As well, a metallic silver brick would match the actual finish of the starfighter a lot better than gray.

[@DewNotDisturb]

Everyone loves the 2015 one that has way less

[@qui-gonjin4371]

I honestly love the design it kind of gives it that antique old vibe that the ship is told to be because in universe the star fighter is pre clone war

[@tydepr]

It’s not supposed to be completely tiled and sloped off. If you watch the show, it kind of has that unfinished, just came out of the workshop look to it. It’s actually accurate to the real thing. Unlike most LEGO Star Wars sets these days lmao

[@n00bplayer72]

I am kind of baffled at the size, too. Of all the ships to be affected by Lego's trend of downsizing Star Wars sets, you'd think it would be this one. The N1 especially, since in-universe these things are tiny. I'm not really hooked on the price either, since past N1 sets at least had a ground crew and droid squad to also pad out the set, this one doesn't.

[@voitteq]

It must've been based on concept arts since we got it so early.

[@tommyhallo]

Mandolorian doesn’t have foot soilders

[@british2852]

The only reason lego added ground crew was to justify/increase the price of a set

[@dgray3771]

I think their mind is on the idea that tanks, fighters and other vehicles are kids toys. With the exception of these larger pieces. This is kinda an odd one out. Compared to the Tfighters and Xwing as well as the tanks so far. It is almost meant as a collectible. Which it basically is. Even the stud shooter is totally built in. Which usually gets slapped on.

[@lugge2294]

Why don't they use a black katana from the ninjago sets? It may be a little too long, but looks way more accurate. I did that 10 years ago

[@imperial5477]

4:00 MandR put the tool belt upside down, thus bringing another 10 years of lazy darksaber

[@BenHannaNZ]

I think I struggle with this set because it needs more plate to look sleek and smooth like it does in the show. Plus I really wish they would do a metallic silver helmet for Mando.

[@TheLaurenssssss]

Loved the concept of a new Naboo fighter. Love the new headpiece. But the instruction, non fleshed out wings, cockpit with so many openings, dark saber and lack of chrome makes this a skip for me

[@harry-it7xz]

I feel as they will probably turn it into a ucs set as they did with the original n1 starfighters with chrome so i think that's why they have left the chrome out also making it chrome could be quite expensive

[@1stud2bricks]

Man they’ve really sucked the soul out of that instruction booklet

[@georgieporgie10]

Yeah fs looks like it was made on a home copier😂

[@Bascanska_Ploca]

i like it

[@DewNotDisturb]

@@georgieporgie10 it looks worse than a bricklink render

[@brandonjenkins723]

Yeah totally unbuildable!!!

[@kentslocum]

If they want to be environmentally friendly, give us a nice fold-out glossy poster of the box art with a QR code to the digital instructions.

[@Wowee123-z3s]

The ship does no justice to the Razor Crest but it’s still a really cool set! I’ll definitely be picking this up and be adding it to my Mandalorian set collection, even though it is a Book of Boba Fett based set.

[@JayPlusForerunner]

*Book of Mando*

[@j0doe1]

Book of Boba Fett? I recall it coming from a standalone episode of The Mandalorian

[@stateyournameplease]

@@j0doe1 It is from "Chapter 5: Return of the Mandalorian" from The Book of Boba Fett. The show was basically hijacked by The Mandalorian for 2.5 episodes and was much better than the shitty arc that Boba had... 🤣

[@Se-du7sh]

The Mandalorian Season 2.5

[@kiwigaming09]

Well I already have the Razer Crest set and the trouble on Tatooine set so this will have my third asset that is the exact same as the last two I have.....

[@juniorbatman7125]

Just received my Z-95 Headhunter poly bag today….thanks so much for the 501st brick and the beach stormtrooper….good to see you yesterday…keep moving your channel forward and keep pumping out those cool ass videos….

[@meemee48larue22]

Ordered mine, waiting for it to arrive. I cannot wait. Thanks for the info Great as always 👍

[@UwwBlake]

I feel like they should have included a hairpiece for mando. He's not bald so having the printed face (while nice) without a hairpiece is rather pointless?

[@ajrobson2191]

Yeah they did the same with kylo ren in the new (old now but newer of the two) command shuttle. Really weird choice from Lego

[@datboi9314]

Just use another hair piece if u have one available of course, but almost everyone has extra hair pieces

[@flashfire9825]

@@datboi9314 that’s not a fair assumption Some people may collect Star Wars sets only and not have a fitting hairpiece to spare That’s why LEGO should just throw it in there

[@jacobplayer2709]

Yes! I was thinking the same thing with mine like why have a face and no hair?

[@InhabitantOfOddworld]

​@@ajrobson2191 I ended up using the new-style Loki hairpiece (i.e. Old Luke mold but black) for Kylo because of that

[@the1andonlyjawa]

The only reason I would buy this set is if it went on sale for around $40, it should've been that to start with

[@legostarwarstheskywalkersa7821]

Hey jawa

[@pamelamcguinness3911]

I don't think it will get 33% off but it would be pretty nice

[@ev1627]

I think $45-$50 seems the most fair but lego somehow almost always makes the pricing too high

[@minicle426]

@@legostarwarstheskywalkersa7821 UTINI!

[@stormhawkdude]

YES! Since the leak I've been saying they bounced the price up $20 just for the BD droid as a finger to the people wanting Fallen Order sets and calling them out for the double-standard of saying FO was "too violent" when other series like Jurassic Park/World, Indiana Jones, and even other Star Wars things have more violent scenes in them that ALREADY were made into sets. They KNOW we're gonna buy this set just for BD, because they're never gonna make another one with it, and it is *BUNK*

[@worpd_gamer270]

I have seen other fan made designs that have aspects that I think are more accurate, but overall I love mine (just got it a couple days ago) and 100% agree - the model is surprisingly large! I didn't expect it to be that big honestly. I feel like Lego has been getting smaller in size and more money, but this is a decent size with a fair amount of heft to it! I just need to make me a sweet stand for it now... and maybe add some LEDs...

[@nikulus2840]

12:46 That is a really good thing for this set. I own the 2015 version, and the back part of the fin always snaps off. It might be because of the sets old age, but it's very annoying. This new version is a great improvement!

[@paraworkz]

i had the exact same issue with mine and that part got lost

[@Kingsservant83]

Started to collect Star Wars Lego after 20 years, very helpfull videos. Subscribed

[@liamgassler4357]

Lego used that bottom piece to promote the great and very requested Luke’s landspeeder. Lol

[@PrimevalParadise]

Since Lego have decided to do Mando's N-1, I would really like to see a new Episode 1 N-1 since it is by far my favourite Star Wars ship

[@scroft469301]

Have to pass on this one for 60 dollars. There are so many little things LEGO could do to entice a collector to part with an extra few bucks but in this case they fell short. Maybe if it goes on sale somewhere in the future. Also I wish they would stop using mini figs as a ‘carrot on a stick’ means to get us to pay more. I get it on some, but it’s not the only reason to buy a new set.

[@aaronsibley]

@@repticare101 they're talking about their feelings on the set, something you do in the comments of a video about the set, what are you contributing?

[@Will_Forge]

8:10 that might have been an effort to create the grime lines in the bottom. As you can see in the image you provided in the video it does have a substantial amount of engine grease looking grime and dirt on it. Maybe they assumed that since he's been living on Tatooine for a bit that the sands would have caked into that dirt and made it a lighter color, or maybe they just figured brown is a decent grease color.

[@simon6677]

Why did I flinch when he shot the spring loaded shooter at 7:48 LOL. Had this set pre-ordered since it was announced and pretty excited to finally get it soon!!

[@carpingnyland8518]

It's definitely strange that they used the 41948 plate in medium nougat. Not that there was a better color choice already available for it (maybe light aqua?), but it looks likes they could have used a 22888 (plate, round half 4 x 8) and a 3035 (plate, 4 x 8) instead, both of which do come in in both light and dark bluish gray. The pieces directly attached above and below would have crossed the seam line, giving it plenty of rigidity. Based on current prices, it would be about $1 to buy the two.

[@EpicSwaggSwaggBossBabyGamer]

You know to much

[@carpingnyland8518]

@@EpicSwaggSwaggBossBabyGamer Just Bricklink and some MOC building experience.

[@Smarty7752]

Wouldn't using two separate pieces interfere with the spring loaded shooter placement?

[@carpingnyland8518]

@@Smarty7752 No, the two new pieces placed edge-to-edge exactly equal the current part. Doing that creates a seam across the part that isn't currently there (it like you cut it or broke it along that line), which could potentially weaken it. However, as I mentioned, there are pieces on top and below it that would cross the seam (i.e., they would connect with both new pieces), so it should be plenty strong.

[@moaistatue3057]

Really busted out the calculator for this?

[@tydepr]

I realized this just now, but grogus torso printing matches with the visor lines on the Mandalorians helmet😳😳😱🤯

[@DBMGaming_]

“Only the best is good enough” also proceeds to provide 1000’s of misprinted Mando headpiece and a prototype instructions booklet

[@CanadaBricks]

The instructions look awful. Why would LEGO take away all the colour and background??? I doubt they fix it, based on past experiences

[@L-And-R-Production]

I modified mine off your video i made the engine stay on better and i made the gap smaller and the cockpit bigger so that he could have his jet pack while he is inside because i made it slide open and i added a different thing to shoot the missile O and i also made the bubble and some of the back look better

[@collectorempire_km]

Just funny how ninjago can get new molds and new colors, even translucent, for every new series but meanwhile we get the same black bar piece that has been used for the darksaber for about 10 years now. Other than that, I like this set. I honestly like large sets that aren’t minifigure scale as it makes the price more worth it.

[@Johan-Gherman]

It's because like this, Ninjago always gets new molds because you can't take a simple piece and say it's a sword, like game controls / ninja weapons, you couldn't do that with just a single piece. But even so, Lego owed that due attention to Star Wars weapons like the Darksaber, just like it does with Ninjago. Sorry if there's a typo, I'm a Brazilian.

[@TheThunderGaming11]

Honestly i think it’s more accurate that Mando’s star fighter doesn’t perfectly line up with the Naboo one because it’s not supposed to, it’s supposed slightly different since it’s modified

[@jadenkuczek1906]

The skin tone they used for Pedro Pascal is the same as the Wooden Jack Sparrow polybag, lol

[@steff_plaetz]

Just a note to say - Every review I've seen of this set (inc this one) has Peli Motto's belt piece upside down !

[@Jay-Zech]

I really like this set. I think it’s a little bare-bones, but it’s nice! Although, it’s $10 too much imo. And I wish they’d use that Ninjago sword piece for the Dark-Saber. I mean, it exists, so the “not enough time” excuse is void. Also, I think that Mando’s head is a new color? Can anyone confirm or deny?

[@DanielTheDuncan]

For the darksaber, I used a black sharpee on a gold ninjago sword lol, and cut the grip very short so it would fit on a black lightsaber hilt

[@Jay-Zech]

@@DanielTheDuncan I just used an old black sword from 2012, they don’t make them anymore, but they used to. Although, I’m no stranger to the “sharpie method” lol. I mean, are you really a Lego fan if you’ve never done that?😂

[@DanielTheDuncan]

@@Jay-Zech yeah I’ve only just got back into Lego, and a few years ago I just had bits laying around 😂

[@pmiller7148]

@@Jay-Zech I used a black sword that came in the 2012 Jabbas palace used for the Bo’mar monks. I cut the handle short and stuck it in a black hilt like you. Looks pretty darn accurate

[@MrMcSnuffyFluffy]

Everything is $10 too much. Inflation.... Welcome to the new world.

[@jaKobus914]

As someone who doesn’t thank a Grogu figure yet, and loved the initial design of this ship… I’m still buying it, especially with Din Djarins face finally showing up!

[@charityquill4965]

i am awaiting a future set that will give mando a hairpiece, but this is a good first step!

[@miguelvizuetecano6449]

Am I the only one who is unpleasant with the minifigure not having a cloak with the jet pack? Similar to the one boba fett uses or something

[@revan22]

It is an issue. Same problem here but the other way, own the slave I and Mando have the cloak but no jetpack....

[@JayPlusForerunner]

I just realized that Bobas armor colors on the box art is more accurate to boba than the actual boba figure

[@druejo32]

Got this at Costco tonight for $29. Wouldn’t have paid $59, but my son will enjoy it for $29

[@fayez_06]

Will a new play scale gunship come out in 2022

[@lukasheide8308]

2:30 my thought for a darksaber was, remember that Ninjago blade pack that had those daggers, hooks, and katana blades without handles? Well what if we had that in black and used that on a silver lightsaber handle or the Ashoka lightsaber handle

[@bradenmanning9980]

Has anyone notice the piece at the tail ind have where the rubber half has lighter color

[@vampiresquid74]

I just don't understand why they go with the dark gunmetal for the jetpack.. its a simple 1 color piece; there is absolutely no reason it shouldn't be silver like the rest of him

[@Gzilla313]

I specifically bricklinked a silver jetpack and the pauldron from the 2010 Boba Fett figure for my Mando.

[@vampiresquid74]

@@Gzilla313 shoot that’s such a good idea, I wasn’t aware the one in that set was silver. Even less of a reason it’s the wrong color now! Literally comes in the correct color

[@Gzilla313]

@@vampiresquid74 sorry for miscommunicating. The reddish brown pauldron is from the 2010 Boba Fett, the jet pack I believe was only from Jango Fett and an Advent Calendar mini build.

[@vampiresquid74]

@@Gzilla313 ah gotcha

[@that_one_gamerofficial1563]

My one gripe with Peli is that mid-legs would've worked better, since she is on the shorter side compared to Mando

[@Carsonrockett]

Thoughts on chicken?

[@blockomaniac]

it’s all right

[@_____A660]

Noice

[@pa1nneeded885]

@@blockomaniac don’t diss chicken please

[@hoglit282]

fried chicken good

[@pamelamcguinness3911]

@@blockomaniac ye

[@cmdrTremyss]

I like how you point out even the small mistakes. From this much money, only the best is good enough. Not having a proper darksaber is outrageous at this point. It's unfair! They could have at least use the Katana-hilt (Lightsaber Hilt Short with Ridges), recolor it black, if they are so cheap on making a new mold. Or even a regular lightsaber hilt in black. On the other hand, using a simple black rod is lame. There should be a glossy finish on that piece, or use trans-black. I skipped all the mandalorian sets so far because of such mistakes, at least we have a head for him now. Not sure I'll buy the set though, it should be better.

[@theCAPOSHOW]

$60 and they don’t include a hair piece for Mando .. what! Great review. Didn’t realize the set was this beefed up!

[@herewegoagain...]

Looking forward to the N-1 Fighter comparison video!

[@msims212]

Didn’t want to bother you man but I was the guy at blaze pizza who got his pizza dropped on the floor the other day at the springs! Enjoy your content keep it up

[@hunterl1551]

Does grogu fit in the middle compartment? It eould be cool if so because then you can convert the bubble back into a droid attachment like in season 3 with R-5

[@chelbel0624]

I think the front of the droid doesn’t have enough print. It looks way to bare and if I hadn’t been familiar with Jedi fallen order I would have never guessed what that was. But I think the set looks ok, I think it could have Benefited from more tiled off wings but I still think this set is good

[@catierose3647]

Speaking of the fallen order game give me a Mantis Lego ship!!

[@UwwBlake]

I think that orange piece is from the playset Luke's landspeeder

[@legomanscooby2544]

I wish I got this over the 4 in 1 Lego Technic set, I still don’t collect technic sets but I only bought it because my mom thinks it’s cool

[@jjanevski]

Had this set for preorder but canceled. I can wait for this to go on sale.

[@KixSlim]

Yeah this set will be a solid purchase when it goes 20% off

[@lowdownpapaya7292]

Walking L moment

[@thebrickbulbasaur7628]

I love it and will definitely get it after watching the reviews. Super happy with the storage, I wish they did that on more sets

[@Hunt3rYT31]

5:22 it’s the second time we had a mando ship that was “larger” than you expected. Why tho?

[@kixuh6314]

i think it wouldve been better if they just made a silver original naboo startfighter. Instead of making it bigger just give it chrome pieces

[@Jeffrey519]

This is a set I had little interest in at first being partial to the Razor Crest, but now I can't wait to get it. The size is impressive and somehow the Lego version of the ship looks cooler to me than it did on TV. And with Mando and Grogu in the ship it just looks great. I like Peli a lot on the show and I always welcome a new droid. I just wish they would have provided a hairpiece for Mando, but that's my only gripe. Agree that it doesn't feel like it's overpriced which is rare with Lego lately.

[@charityquill4965]

I'll hold out hope for yet another significant moment for mandolorian season 3 that will have a helmetless scene to justify giving us a set with a hairpiece for djinn

[@scotttaylor5556]

At 10:11 I have a silver astromech droid that could look pretty cool in that open spot

[@NowAndToEternity]

It is a $40 set at best lol. Rmb the time when a $20 set contain 3 full and exclusive minifigures?

[@Daft_Vader]

Mando sure loves old, cobbled-together ship's with no paint and large engines held out either side

[@riaanduplessis3667]

where is our comparison video of the naboo starfighters?

[@nacurity]

So they molded a new droid but didnt do anything for the dark sabre

[@harry-it7xz]

I cant wait to add this to my n1 starfighter collection!! thanks for the review!

[@varazadi]

The stud at the back of the BD mold is to slot onto Cal's back.

[@legomattie3295]

That dark orange (or is it dark naugat) is used to make it look old and worn down. This set was announced right after the end of book of boba fett, so it looks like another case of disney didnt informerd lego correctly

[@hmrdev-billnye8166]

Every time you lift Din Djarins helmet, i see Chris Pratt's face

[@TheSustainer]

Super Sharp review! I was SO surprised to see that it was such an interesting and beefy ship. Loved that you agreed on the hyperdrive coming off way too easily - I am looking for a tech fix - and also, I want to add landing gear…

[@55studio68]

HOw dId yUO gEt thIs EArly?!

[@mo_rhec6293]

my gf heard someone complaining about lego and my gf said “who’s that mandr?” 😂

[@LexusLFA554]

I got it at a german supermarket for 45 bucks. It was the last one. I finally have a Baby Yoda now xD

[@SushiVolcano]

It doesn't have to do with cost savings. They just put a different liquid into the same mold. It's so you can tell the pieces apart easier when building. Take the 7662 MTT, for instance. Some of the reddish brown is replaced with dark bluish-gray to tell the pieces apart better. This was later made a bit better in the 75058 MTT, where the replacement color is dark brown instead.

[@JP.03]

9:47 No way! There is a Jango Fett's Slave 1 set this year after all! 😆

[@True_Camo]

i love this set already! Im happy to see its much bigger than i first thought, so now im 100% sold on it and cant wait to pick it up :)

[@paulwright6312]

Love the vids

[@cw7legionofpewrights596]

Will be picking this up, one of my favorite episodes when he gets it’s built and definitely a car guy episode but Star Wars. The N1 in universe really a power house in Star Wars and it got hot rod

[@RyanStudios50166]

The fact that you aren’t in lan and still got the set extremely early lmao

[@Dr.Swagtastic]

Since they stated that they didn't have enough time to make a new darksaber mold, does that imply that there are plans to make one in the future?

[@MandRproductions]

Well they also “didn’t have enough time” last summer for the Imperial Light Cruiser…. And then they had another year to do this and didn’t. They clearly weren’t working on it so I’d guess they aren’t working on it now.

[@Gzilla313]

UCS Razorcrest upgrade to the Mando figure maybe?

[@Dr.Swagtastic]

@@Gzilla313 There we go and then it’ll be $530 for our dark saber. That’d be a typical LEGO move 😂

[@Bricklander21]

When are you going to review the Dagobah set because it is one of the best sets of the year!!!

[@Radd1976]

The yellow leftover from when they painted it is to make it resemble the Razor Crest.

[@lukemccluskey8582]

Stellar review as always Ryan!

[@Qidif]

Is it just mine or do the engines on the tips of the wings wiggle?

[@YoutubeChannel-pd2xf]

That Mando head is a new color introduced this year! It is 371 Warm Tan.

[@jmodsbricks]

Why doesn’t your box have the piece count?

[@jacksauce]

I really hope that the inclusion of the BD droid is a hints at future Jedi Fallen Order sets. I desperately need Kal Kestis in Lego form!

[@jamessoth1479]

I think as a community we're feeling the effects of inflation on legos. It's going to take some time to adjust but things are just getting more expensive.

[@minicle426]

I'm going to alter this slightly so Grogu can have a mini turret. :P

[@yankee2110]

I would think the manual graphic would show the cockpit slightly lifted up is because that is the design.

[@Řẽțářď67]

i think you put the belt on upside down on peli motto.

[@DuckofFail]

8:30 that brown piece looks like something that may have been used in something like Boba Fett's Throne Room?? certainly, not an overly common large oblong plate. They probably had lots of them already molded.

[@GM_Mack]

I bet Lego put that weird color piece there because now you have to use brick link or pick a brick to get a new one in grey so that then they get another few bucks for each set they sell

[@CanadaBricks]

The new face print for Mando looks amazing! It seems that the downward shifted print for the helmet has returned for some people.

[@chrismatulka4042]

Can you do a video on remaking this shop without the storage area infront of the cockpit please it's way too long in that area and without the storage area this set would look more accurate

[@DaveDaChicken21]

I love this set!! Happy to see your review!

[@thedorkside2927]

The hole on the back of bd looks like it could go on a backpack thing for cal

[@Tech2HelpUs]

Great review as always. Cheers...

[@jesusmartinez9459]

Anyone else notice the mando Minifig torso and where the legs meet don’t line up. the torso is a bit wider then where it meets the legs.

[@GM_Mack]

I think the black head looks better because when he has the helmet on, it looks like he's wearing the turtleneck thing he wears in the show

[@Pahricida]

why couldn't they put smooth slabs on the wings all the way also the yellow markings are missing.

[@daki_0013]

This is the type of set you wait for good discount.