Marathon III Micromotor Dental Handpiece Maintenance

[@thejyothi1283]

Much appreciate you going through this showing this type of service ❤

[@TZMCV]

Thank you for your comment, I really appreciate it.

[@markkeaton8132]

Thank you. This IA a big help.

[@Green-Laser-------]

Is normal that the handpiece gets warm from where the brushes are?

[@TZMCV]

Yes, it is normal, there is the heat vent of the handpiece but when the brushes are too spent it is heated a little more.

[@omarkarim7982]

Entre el strong 210 y el marathon III cual recomiendas más?

[@TZMCV]

Yo creo que eso depende del uso que le vas a dar, ambos son buenos, mayoria de dentistas usan Marathon III, manicuristas usan Strong, lo importante es la calidad de la pieza de mano que sea original.

[@jannaqeeb7037]

Yeh machine slow no ho rhi kia problem ho sakti hai

[@sharoncastaneda9891]

Ayuda me acaba de llegar el micromotor pero al parecer está atascado la fresa o el palito con el que vino y he girado pero no sale

[@efrainjimenez8395]

Se me quedo el palito de la fresza que puedo hacer

[@pattimarko9090]

I know one is air but what is the other item sprayed?

[@TZMCV]

Yes one is air (Dust Off) and second one sprayed is Alcohol.

[@dlhg8181]

Can this marathons micromotor be used with a sagittal saw

[@TZMCV]

I think not, system is different, you will have to get a Sagittal Saw Handpiece.

[@dlhg8181]

@@TZMCV If I get a sagittal saw handpiece will it connect and work with this micromotor

[@TZMCV]

@@dlhg8181 I don't know if works try it but the compatible system is: Dental LED Brushless Micro Motor/ 4:1 Surgical Saw Straight Handpiece E-type

[@selfsatisfaction1932]

My contra angle handpiece got stuck with the engine,how should I fix this

[@TZMCV]

You will have to open it and put some lubricant.

[@zuleymanorozco3434]

Buenos días que lubricante puedo usar para la pieza de mano?

[@TZMCV]

Hola, puedes usar aceite sintetico, viene en spray o en botellitas de gotas, buscalo por amazon tienen de varios precios.

[@LikeAGroove]

Yea thanks for showing maintenance for half the hand piece -_-

[@dreadknot2238]

Hello I'm having problem with mine the handpiece is not work I tried changing the carbon brush still motor not working I can feel the handpiece get hot can you tell me what the diagnostic problem is thank you

[@TZMCV]

Ok, If you changed the carbon brushes and motor doesn't work and gets hot, motor is stuck. Motor has two plastic pieces at the rotor ends near the bearings, these plastic pieces deform with heating of the rotor friction, causing the motor to stick

[@dreadknot2238]

@@TZMCV thank you for your reply! After I lubricated the handpiece the torque is not there it slip a lot the contra handpiece that attach to the motor I have to constantly put pressure down on there when using the motor to keep the torque there or eles the bur will stop spinning or to prevent losing any torque ... Thank you

[@jessicahdz1405]

Una pregunta es que la pieza del micromotor de repente se para, que puedo hacer?

[@TZMCV]

Bueno, hay varias causas, revisa el interruptor de encendido de la caja de control y del pedal si lo tiene, revisa el cable de la corriente y del micromotor a la caja de control, el conector de este puede tener humedad, desconectalo y soplalo con aire comprimido, tambien las escobillas del micromotor pueden estar gastadas, etc.

[@omid7665]

من طریقه سوارشدن قطعات رواون قسمت آخرموندم نمیتونم درست کنم نمیدانم بلبرینگ خرابه یامن درست نمی بندم

[@TZMCV]

در کدام قسمت از ویدیو نمی توانید قطعات را مونتاژ کنید، خوب به آن نگاه کنید زیرا می تواند در انجام آن به شما کمک کند.

[@omid7665]

@@TZMCV تا حدزیادی کمکم کرده ولی هنوزنتوانستم موفق بشم. یادآوری بجایی بودممنون

[@omid7665]

@@TZMCV ازانتهای هندپیست که بلبرینگ هارو این میله سوارمیشن ترتیب شون را. هرجورسرهم میکنم نمیشه

[@aminadjellatou1072]

Merci infiniment

[@iranicz8476]

my device reverse button not working. please help me

[@TZMCV]

You have to open the control box to check inside if it has the reverse button cable loose and also the handpiece connector...

[@krishnapanday5488]

waiting for your next video.this subject

[@yoletgomezcuello4746]

No explicas nada está sin voz

[@TZMCV]

Gracias por preguntar pero yo creo que los videos sin voz y apoyados con fondo musical son más explícitos y entendibles en todos los idiomas pues una imagen vale más que míl palabras...

[@banam6754]

why the iron piece is stuck and not coming out with my new handpiece ?

[@TZMCV]

The rotary burr?

[@iranicz8476]

tanks

[@iranicz8476]

good

[@yohy7739]

Hola, no me abre la pieza de mano para cambiar las fresas. Que puede ser?