How to Operate Your Ideal Logic Combination Boiler. Easy to Follow Step by Step Instructions.

[@paulabrass5568]

I'm a single parent and I woke up today -1 outside with no heating. Your video showing me how to top up the pressure was amazing I can't thank you enough I thought I was going to be without hot water and heating 👍

[@dzika_madzia]

s1

[@Renvaar1989]

New home owner here, this was super helpful setting my boiler for the first time. When we first moved in we had things set higher than we needed, specially with the water.

[@emmaharriyott4255]

Just moved into second year uni flat and this saved a visit from the landlord. Great video very accessible. Thank you x

[@alexandramezeul8875]

Had no water pressure or hot water today - watched your video and fixed it right up! Thank you for explaining it so well! :)

[@lindawoodger9152]

Just found your video on the ideal logic boiler, brilliant clear instructions, thank you

[@TheCypressbill]

Thank you for your very informative and helpful video. As a general rule for my safety and others aswell as from a legal stand point i do not touch gas boilers.. Since the boiler was displaying that it was low pressure I followed your instructions and the boiler is now working again. Saved a trip out for the local council. Thank you

[@jdmbandits9406]

Guys a legend, wife bled the radiator in our daughters room to much ie all the water out and she couldn’t re fill the boiler she tried this video to no prevail water in to the boiler had a cap on from institution 😂😂😂 bless her she was crying though she had buggerd the whole thing, credit to mark for saving the day

[@connorlumsden3950]

Check your inhibitor levels👍

[@nicolaorourke4755]

Just getting this boiler fitted in 3 weeks so really appreciate your explanation 👍

[@gillianstuart4519]

Excellent video so easily and clearly explained. Thank you so much.

[@lazarusxtc]

Great video.I thought I was going to be freezing with no heating tonight.All solved now.Thanks!!

[@arga1966]

Life saver. I had low pressure and a leaking filter😮 all fixed thanks to your video. Thanks a Million 🤗🤗🤗

[@liliangeurts8400]

Lovely clear instructions and explanations, thank you

[@SeleneCJordan]

You are an absolute God send! I got the dreaded ‘F1’ after I bled my radiators and I would have had to wait 3 days for it to be fixed, if it wasn’t for you! Thank you!

[@mariedamon5655]

So helpfull very clear instructions thank you

[@amyyydd1052]

You’ve just helped me fix my boiler thank you !

[@adenostalgia66]

Repressured my boiler and couldn't remember the way the valves were when I started. Thanks. Brilliant video

[@annmbeltran]

Thank you so much! Me and my family just moved in to our new house from London to the North East so it's much colder here. The boiler brand is the same like in your video but a different model (Ideal Instinct). I learned a lot of valuable info about saving gas. Subscribed!

[@jasongroom4591]

Just had a Ideal Combi c30 installed and this vid has aided me lots so thank you! Engineer upon completing install did run through certain things but he went so fast I couldn’t keep up! It was ten past five though… Probs knocking off time. Thanks again! 👍🏻

[@martinisherwood2854]

The E is also on mine in condensing mode

[@martinbuttrick]

Same here just bleed my radiators then had no pressure instructions were beyond me. This video has kept me warm tonight

[@crayz1978]

Brilliant video!! You don't know how much this video saved me 🔥👍🏽

[@briancox2057]

You've just helped me fix my boiler, big THANKS from me

[@jojomary1280]

This was really simple and clean thank you!

[@googoo554]

So useful and informative. Much gratitude, thank you

[@ianchannell9045]

Thank you so much with the eco settings was brilliant so now be saving money thank you 🙏

[@rizwannazar4687]

Great video. Helped me resolve my problem too. Thank you.

[@kmubanga]

Thank you so much. You really helped me 😊

[@AJ-uj5sb]

Thanks very much. Appreciate your video 💯

[@TheShinyShow]

Cheers for this, just moved into a place with this boiler and that was handy

[@michaelwagstaff7163]

Thank ypu. This was a massive help

[@minpachabhaiya4887]

Very informative video thanks very much.

[@carole5951]

Great and so clear. My boiler says pump overrun what should I do? Thank you🐞

[@MsVivian99]

Very very helpful! I got one these in summer. When turn taps on sounds like aero plane upstairs and big clunk from ,?mains water? Not sure. So we can’t have heat on at night , noisy especially if it clicks on and off as temp changes. Got engineer to check it, said nothing wrong. So hmmm. Your video was helpful. Thankyou

[@BhupenSolanki-i8d]

Excellent information

[@Angel.1239_3]

Very informative

[@TheLorna2678]

Thanks so much for the great video. New home owner here. I have an Ideal Logic combi boiler, only it's the 35 version and doesn't have the pressure gauge on it in the same place as yours. Nor the 2 buttons for PH and the other one! Where might they be?

[@karenmarsland4486]

Really helpful, thankyou

[@chez9831]

Thank you that was very helpful, just had my new boiler fitted today, it’s much quieter then the old one! but already I have noticed a small problem, the water coming out my taps is a very weak flow, how could I resolve this?

[@hardevgill2425]

hi mark you are genius

[@sii6531]

Thank you Mark 🌟

[@andrewtanner9985]

Excellent thank you 🙏

[@AlexJohn2us]

" BOOM BOOM BOOM ! " Thank you Sir; Your a Natural Born Guide...

[@danivarius]

I don’t have this layout on my logic combi boiler. Not very helpful as I cannot see where the system pressure gauge is.

[@jafaryashar]

Very helpful thank you.

[@rejoiceuchey4607]

Thank you so much

[@donwetherell8738]

Can you turn this to twice a day? Eg. Heat water and out heating on morning and evening? Great video.

[@adamwright6160]

Thank you 🙏

[@Trinketorium]

Thanks for the video. Someone was messing with the taps (cough) to try and sort the pressure out, which they did - but now there is no heating to the radiators. The hot water is working ok... any ideas? I've reset everything to how it looks on the end of your video...

[@Allan-loveswoodturning]

Hi Mark how many Radiatore will my Logic ideal c30 suppport

[@rockystone1821]

Hi, great video thank you. My heating engineer said for me to leave the temp on the heating full up in the winter !! When he installed the boiler he also gave us a boss wireless controller which we have no idea how to work, the engineer said just leave it on auto and forget about it. It doesn't seem to let us control the temperature as if one sets it to a certain degree the boiler should cut out and cut in again once the temp is reached but it seems to get hotter and hotter! Can you advise me if it's possible to fit a manual timer like the ones you simply push the buttons in that are in a circle around the outside? We are not Spring chickens and know nothing about the complexity of the body gadget we have now, very frustrating when all we want to do is put the boiler on a timer twice a day. Many thanks Andrew

[@Michelle-oj2yq]

Same and the thermostat reads high saying its 19 when its mre like 16

[@babybabypink26]

I have the ideal logic 30 and the pre heat button on yours doesn’t say preheat. I have no idea if the pre heats on or off? Nothing showing in display either other than numbers

[@johnreid9329]

Hi Mark what boiler would you recommend? Great videos 👍

[@fenboy1984]

Is there a way to turn the heating on my ideal boiler without the thermostat working?

[@Kangere4949]

Good video but mine is set using the remote control thing and I need to hear how

[@DunkingJaffaCakes]

I had a Logic combi when we moved in and the central heating temperature knob did nothing - As it happened there was a weather compensator installed which takes that control away and the radiator temps are set automatically by the system based on the outside temperature. This is important to note as some people may be unaware that their CH knob is doing nothing. Turns out it was a really crappy system because unless it was near zero outside the radiators were never hot enough to heat the house.

[@adaluvfrances9614]

How do u reduce the pressure on a logic boiler above 2

[@candymanoooooo]

we had our boiler fitted 2 and a half years ago so I thought its time we had it serviced they servied it in march this year but since they servied it the pressure goes done to in a about a week the engineer came back checked th boiler and all raidiators but could not find any leaks could it be th relief valve or the exspansion chamber thet is causing the pressure to drop there is no sign of leaks anywere I have checked quite aa few time I evening took floor board up on the landing as I had some work done some months ago all dry any ideas please

[@cossiep]

On the whole Mark, how reliable and long life would you say these boilers are ?

[@lisawear5134]

Hi there we have the ideal 35 ….I can’t see the pre heat button on ours,is there one ? Many Thanks

[@PEUKtv-mj1hx]

The ideal logic is whistling noise when opening hot water tap and central heating on

[@Lyndsey1fabs1]

What does just L on its own mean on the water side please

[@WasimU]

My Logic ESP1 35 combi boiler doesnt have the pre heat button (the button is there but no writing under the button and nothing happens when you press the button). Also when my heating is on "e" it shows 25 degrees where as yours shows 60! Thats quite a big difference?

[@Vee2711]

Is the flame supposed to be on at all times whilst heating is on?

[@MarieN8959]

How do I set a timer on a C24 please 🙏

[@Ciumi23]

ideal logic combi ESP1 38 boiler . The heating keeps running downstairs and upstairs it goes on only if I increase the temperature on the thermostat. The thermostat downstairs I set it up all hours and day’s to 18 degrees- even if I have set the temperature downstairs to minimum the heating still runs generating high temperature downstairs. I have switched the thermostat uit the one from upstairs and no change !? Any idea what’s going on ? I have no error display on the boiler

[@ktb9369]

Has the Ideal Combi ESP1 35 got preheat and how do i turn it off if it has. It has two of those squares but left one says nothing doesnt say preheat like that one and no display for preheat. It has reset. Also how do you make your water hot my baths tepid even at 80.

[@bellefreeman803]

Hi I've got up this morning no radiators on or hot water. I've gone to the boiler to top the water pressure up as I know how to do this. My house is a council house,and council don't like leaving the loop fixed in place . I had the same issue at Xmas and had to call them out as when I connected the loop on water was coming out of the 1st pipe with black and blue taps. But water was dripping from the blue tap. Anyway the council came out and he said there wasn't a washer in it so he put one in. I asked him if he could leave the loop connected up which he did. So I've gone to try and fill the water pressure this morn and it's dripping a bit again. But it sounds like the water coming through but struggling if that makes sense. I've got the pressure to 1 bar and turned the blue taps off. I will keep my eye it and if it drops again will have to contact the council to come and have a look at it.

[@AbdullahKhan-hy5oo]

Do you know why the boiler keep showing blead radiators or contact the installer as the radiators have no air, expansion vessel has been replaced with a new one. When we try to reset, start up but every day many times we have to reset. It's been a real pain. Thanks in advance

[@Ilyaryx]

On the bronze tube i have a black thing on the right which is like a Chela and not coming off so i cannot connect the tube to a right side , what shall i do ?

[@Allan-loveswoodturning]

How many radiators will a ideal logic c30 support thanks

[@jeanettehinds4253]

Is it ok to switch the mains off to save electricity

[@a.constantin]

Hello, at exactly 14:57 there's a side panel underneath the boiler which has 2 buttons, mine is displaying red led, I cant find any information on the manual regarding this, could you please share any knowledge you might have on it?

[@Uz4air]

Um hello i have a question how come i dont have the tap knob only the radiator knob

[@Uz4air]

I have an s15

[@grantpreece]

If it’s on Eco it keeps kicking in using electric I’ve just realised that so put dial just before eco and it’s not short cycling now

[@IntruderFilmStudio]

A very useful video thanks. I have the same question as someone else but there was no reply. I increased the pressure to 1.5 bar but when the boiler started operating the pressure rose to about 2.5 bar. With it switched off it's now on 2 bar. How can I reduce the pressure?

[@DaDdy79462]

I have this problem too, I bleed the radiators, until water started coming out, this reduced the bar down to 1, but what is the correct psi is anyone's guess

[@Paola11852]

Hi Mark, My boiler has F1 flashing, I normally check water pressure which is on 2 now tho doesn’t work? Do I need to drain my radiators first?? Thank you very much 😀

[@IntruderFilmStudio]

@@DaDdy79462i contacted the boiler installer and explained that after setting the initial pressure to the correct 1.5 bar, the pressure rose to 2.5 bar when operating. I was told this was okay so I haven't taken any further action. I hope this helps.

[@DaDdy79462]

@@IntruderFilmStudio Thank you

[@davidharfield2678]

My pressure is 2 bar.Is this to high?

[@SamFarley098]

I haven’t got the pipe connecting the water valves, what do I do?

[@becky1993x]

I have the exact same boiler but my pressure gauge is between 3 and 4 it's really really high. I don't know how to lower it and L2 keeps coming on!??

[@tk4270]

What could it be when preheat does not come on after switching preheat on. I have older Logic 30 boiler with a dial for turning preheat on and off and no display.

[@Caroline-Ann1509]

I have the button for pre heat but it isn’t labelled pre heat and it doesn’t appear to do anything when I press it? Any ideas?

[@MarkBallardLTD]

What boiler

[@shellyburke1501]

I've had the c30 installed few month ago I haven't used the heating much but for past few days it keep coming on my heating for few mins then goes off why is this

[@letiziagp2202]

boiler logic+30 2016 make a loud sound, what can i do ? tks

[@Ridhwanalpha]

Hi flame symbol goes off after reaching the setting temperature, then temperature drops around 11 degrees, then flame symbol comeback again. Do you think there is a problem with the boiler for the flaming symbol going off and on 🔥 again, or is it normal. Thank you

[@MargaretSteele-w5q]

Just moved into a persimmon flat the boiler seems to be constantly turn on and off it is very noisey not happy with the costant noise it is anew build ground floor 2 bed flat open plan living area and kitchen

[@mjb6442]

My WiFi control is broken. How can I turn on the heating manually? I have the c24. Dial is turned to tap and heater but no heating. Thanks :)

[@davidfennell7867]

Why is my boiler coming on during the night heating full blast although the thermostat is set at 5 deg between 22.30 and 8.30 ???

[@gillridley9932]

Help LC showing on my boiler

[@lburr35]

16:53 hey, please help, my boiler combi 24 doesn’t have two blue valves, it has a black/blue/yellow and then a black one, help please 🙏🏻

[@maddavvid2339]

Hi Mark , would you have any idea how to set the pre-heat on an ideal logic Combi 2 c35 Boiler Many thanks mate

[@lisawear5134]

Hi there, sorry to bother you, did you find the pre heat button in your c35? Struggling to find ours! 😊 many thanks ….Lisa

[@maddavvid2339]

@@lisawear5134 good morning unfortunately I never did find the preheat button but after a bit of a research I found it is better off than on as water is cheaper than gas. Hope this helps you 😂

[@lisawear5134]

@@maddavvid2339 Thanks, appreciate that! Have a good one 😀

[@eleven8338]

What to do if no central heating but with hot water

[@carlhole-maloney3249]

What happens if the gauge goes too far ?

[@safari27ful]

I've got a load noise from my boiler

[@sarahpowell7981]

Can't get my heating to stay on long it turns off

[@Bernietheoc]

👏🏻

[@professorposh4146]

my water is fluctuating between hot and cold, what do i do?

[@estherkasozi4202]

My boiler doesn't look like this kmt! I can't seem to get my heaters on ever since my boiler was installed

[@will2296]

When I set my hot water temperature to any number it just flashes back to zero can anyone help?!!

[@MultiJonv]

Hi … can you please answer my question I want to relocate my radiator which needs extending pipe.. For this I believe I need to stop the water coming to the radiator… Please let me know which valve in the boiler should I turn off to do this??? Thank you in advance for your help

[@we-are-electric1445]

When I switch my hot water tap on for 20 seconds I can see the temperature go up on the display but when I turn the tap off the display goes back to normal but the boiler stays on for several minutes. Pre Heat is Off. The room thermostat is also in stand by mode so it is not demanding heat for the radiators. Anyone suggest what is going on ? It seems to me it is wasting gas every time I turn the tap on. Hot water is set to 50 degrees on the boiler.

[@sniikii3802]

hi im going through the exact problem, have you fixed it yet? and if so how pls

[@we-are-electric1445]

@@sniikii3802 Gas fitters are coming round in a couple of weeks to look at it. They fitted the boiler so they will have to fix it. I will look to post the solution when they tell me what is going on and how they will fix it.

[@carcer5462]

For winter mode (Tap+Radiator) using a thermostat (Honeywell T3H700RF0069) makes the little receiver box click to say it's acknowledging the temperature setting. But the boiler never turns off it's permanently on like it's ignoring the thermostats request for a specific temperature. Could this be a wiring issue? I've reset and re-synced the receiver and the thermostat after a power down (Including the reset from a previous video) but to no avail.

[@mick6812]

Giving priority to to hot water instead of heating sounds nuts or helping the gas company..

[@PEUKtv-mj1hx]

I’ve called a gas to see what’s going on with boiler on ideal logic