Marshall TSL 100 Disaster Chassis Let's Strip Out All the Components

  Рет қаралды 964

Vintage Guitar Amp Repairs & Online Guitar Teacher

Vintage Guitar Amp Repairs & Online Guitar Teacher

Күн бұрын

Пікірлер: 39
@zapruderpedro
@zapruderpedro Жыл бұрын
"more knobs than a midnight bus shelter" classic. love this video series
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello lol, thank you. Should be more to come with this one. Take care.
@goodun2974
@goodun2974 Жыл бұрын
The standard technician's joke is that the inside of old point-to-point, handwired Magnatone amplifiers look like the result of an explosion at the spaghetti factory; well, move over, Magnatone, the real spaghetti-factory explosion has arrived! Reminds me of some dialogue from the movie "No Country For Old Men": "This sure is a mess, isn't it, Boss?" "Well, if it ain't, it'll do 'til the real mess arrives".
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Ha Ha Ha, I think that sums it up perfectly!!
@MrJLobster
@MrJLobster Жыл бұрын
...liked how you hated those neutrik jacks.... just like I do personally but I have to admit - despite from the flimsy looking plastics around it - these are the second best sockets available on the market. The contact materials are from the highest quality, spring tension is outstanding and the contact surface is actually slightly larger than those of the english cliff jacks. But - I hate them don´t know why.
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello. That's interesting. Some good info there. I know were you are coming from with them. They don't look and feel quality. But hey if they work well then I best be using them. Thanks for watching and take care.
@goodun2974
@goodun2974 Жыл бұрын
Some or perhaps most of the 450 V electrolytics are probably wired in series pairs, so it's not necessarily 11 filter nodes, it might be just 5 or 6.
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
To be honest they could have been all wired up together. One giant smoothing node.!!
@Patrick-dz8cg
@Patrick-dz8cg Жыл бұрын
Wonder what his next project was ?
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello Patrick. I never thought of that. I wonder indeed. I doubt it will a Fender champ though. Thanks for watching and take care.
@DJTonyCMP3
@DJTonyCMP3 Жыл бұрын
Those caps are top end matey
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello Tony, thank you. Best hang on to them then till we get a worthy project. Take care.
@neilverdon8358
@neilverdon8358 Жыл бұрын
Bus shelters in Coalville the small town in England from where i originally hail at midnight indeed where full of knobs amongst other things. ;lots of nuts out of this job; Screw holes? drunks with chainsaws I am now wet Thank you.
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Ha Ha, Coalville isn't that far from me. It's about 45 miles away. Thanks for watching and take care
@stevencochrane115
@stevencochrane115 Жыл бұрын
What an absolute hotch potch of parts and components, and it's not even been done well. It just make you wonder what some people are thinking. Hopefully some of the parts can be reused.
@darrenattwood8199
@darrenattwood8199 Жыл бұрын
You could get a small cutting disc on a dremmel and cut through the knobs , try to save the pots. Set of knobs would be cheap enough, if you need a dremmel I have one
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Good plan Stan!!!!!!!!!!!!
@goodun2974
@goodun2974 Жыл бұрын
Since the knobs don't appear to have setscrews and were glued onto the shafts of the pots, it looks like the knobs were designed for splined shafts but somebody drilled out the interior of all the knobs to remove the splines! Which makes the knobs virtually useless except maybe to save the gold caps ( knob "brights", we call 'em) off the ends and use them to replace missing gold caps on other Marshall style knobs. Otherwise, you'd have at least $50 worth of knobs here, but they're pretty much useless now.
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello, yes I thought that too. Imagine all the work that went in to destroying those. Take care.
@pda49184
@pda49184 Жыл бұрын
When you think about the cost, time and effort that went into this Frankenstein creation, it really makes you wonder. It seems the builder has attempted to get inside Bruce Egnater's head without his skillset and design expertise. A Soldano clone sound like a runner, but why not go the extra mile and do a Dumble 😅
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello Pete. Yes, a lot of money wasted. Who knows what was going through his head. Take care Pete.
@badmongleo
@badmongleo Жыл бұрын
That’s the way Marshall grounded it sorry had the same thought when I worked on mine.
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello, thank you. Yes, not the best way to ground. Thanks for watching and take care.
@bluesplayer59
@bluesplayer59 11 ай бұрын
I did own a Tsl 100 . I only had it a few months and got rid because it just didn't sound very good . Not a good amplifier so I can well imagine why someone did this .
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 10 ай бұрын
Hello. I never liked them either. Thanks for watching and take care.
@johnburns5783
@johnburns5783 Жыл бұрын
Reckon there’s summat the matter wi yer camera microphone 😉😉( needs running through two AC 30’s) 😂😂
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher Жыл бұрын
Hello John. There is I have manged to sort it out. Th AC30 idea is a good one. Thanks for watching and take care.
@fiddlix
@fiddlix Жыл бұрын
Wow…whoever thought this failure of an amp was a blooming idiot. I just discovered your channel and subbed it. This is going to be quite an interesting project. I DEFINITELY want to see what you come up with.
@JonnySoundSounds
@JonnySoundSounds 9 ай бұрын
even if it ever worked i can only imagine the noise that thing would have generated
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 9 ай бұрын
Hello, yes there would have been a lot of noise. Maybe some smoke too. Thanks for watching and take care.
@itsonlyme9938
@itsonlyme9938 Жыл бұрын
Sticky caps, try some achol to pull them apart .
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello. Good plan. I will give it a try. It would be a shame to throw away good caps. Take care.
@itsonlyme9938
@itsonlyme9938 Жыл бұрын
I spoke to Marshall and asked if they would sell me a output transformer they said know and only if a was a qulified engineer and is their policy, I have been building stuff for 40 years as a hobby. I was just thinking about your faceplate.
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello. I have heard of other people saying the same. Red Tape. There are plenty of clone face plates that would do for this project, although I don'r think they will be long enough. Take care.
@kookoogearkook
@kookoogearkook Жыл бұрын
Why not make a hand wired TSL100 and you the same faceplate?
@badmongleo
@badmongleo Жыл бұрын
You’ll end up with the same problem as the previous guy spaghetti from hell and probably a lot of the problems the original circuit had like noise issues. The original circuit was over engineered and problematic in all kinds of way if you striped back the circuit to the barebones it’s kind of a good sounding but there are simpler and better sounding circuits.
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 11 ай бұрын
Hello. @badmongleo has got that spot on right. Just to many wires. Thanks for watching and take care.
@craigjonlyon
@craigjonlyon 7 ай бұрын
Why did you destroy this amp I can’t believe it,
@vintageguitaramp_guitarteacher
@vintageguitaramp_guitarteacher 7 ай бұрын
Hello Craig. I didn't destroy it. It came in to the shop I work for as a unfinished project. This is not a stock TSL. The board had been removed and someone had wired several different types of amps in to it. The amp was unsafe to power up. As I had not idea what the person who built was trying to achieve, the only option was to gut it and build another design in to it that worked and was safe. Rebuilding the chassis is on my to do list. I guess the reason they stripped out the board was because it had gone conductive. You can't get the boards for these amps anymore. I will be doing a video on one of these amps in a week or two which may interest you. I understand that it may upset you to see one of these amps gutted but it had already been gutted. We looked in to getting another board for the amp but there is none available. We would have needed a full set of boards, not just the main board. Even if they were all available the cost would have out weighed what the amp was worth. Thanks for watching and take care.
Vox 125 Guitar Amplifier Head Head Restoration Part Two
49:50
Vintage Guitar Amp Repairs & Online Guitar Teacher
Рет қаралды 755
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 269 #shorts
00:26
VAMPIRE DESTROYED GIRL???? 😱
00:56
INO
Рет қаралды 9 МЛН
Will A Basketball Boat Hold My Weight?
00:30
MrBeast
Рет қаралды 121 МЛН
CAN YOU DO THIS ?
00:23
STORROR
Рет қаралды 41 МЛН
Project Binky - Episode 39 - Austin Mini GT-Four - Turbocharged 4WD Mini
57:46
Bad Obsession Motorsport
Рет қаралды 330 М.
The Ingenious Simplicity Of O-Rings
22:37
New Mind
Рет қаралды 155 М.
Repairing the Huge Bucket on my Cheap Excavator (as Good as New!)
25:57
Attempting to restore the world's first Ethernet bridge
25:37
The Parallel Port
Рет қаралды 17 М.
How to repair noise Fender Dual Showman 100 watt 6L6 tube guitar amp
13:28
I Turned a PS4 into a Handheld Console
27:40
Restore Technique
Рет қаралды 358 М.
A Very Unusual Tube Amp Problem......and Repair
9:47
Uncle Doug
Рет қаралды 114 М.
Conversion of a J.W. Davis P.A. Amp into a Tube Guitar Amp
23:54
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 269 #shorts
00:26