How Aftermarket Swaybar Helps and Which One is The BEST?

[@frogmandave1]

Very well presented information Martin. It is obvious you have a good grasp of what is going on with the bar. I run the old design Baja Ron on my RTL.

[@MartinTheVlogger]

🤟🤟🤟🤟💯💯💯💯👌

[@tanyac.c.macbean4707]

I've been riding my 2015 F3S with stock sway bars & shocks since new. It wasn't until last year, that I noticed the rear shock bottoming out horribly & "travel" in my steering. I'm now researching sway bars & rear shocks. Thank you for simplifying & explaining how these magical parts function. ❤️

[@MartinTheVlogger]

Trust me, swaybar will work epic. If you will write me to [e-mail] i can send you options that will make your F3s ride like night and day before and after upgrade :)

[@marcusnz232]

Hi Martin. My heavy duty MTV sway bar and metal links now on my Sea To Sky in NZ. Absolutely transforms the steering and handling. Top product from a man who offers amazing customer service worldwide.

[@MartinTheVlogger]

Thank you Marcus for very very nice words 🤟🤟🤟🤟

[@marcusnz232]

@@MartinTheVlogger 👍🏻

[@OutbackKanga]

Thanks Martin , I now know my sway bar has been already upgraded from factory to the first upgrade bar you have there :)

[@MartinTheVlogger]

Do you feel the difference?

[@OutbackKanga]

@@MartinTheVlogger I have ridden a friends 2012 rt with stock sway bay and not as stable as my 2017 rt with the upgraded bar . It was on there when I purchased the bike , still has the plastic links .. maybe changing them might help a little , when going 2 up i still feel that a stiffer bar would perhaps help.

[@MartinTheVlogger]

@@OutbackKanga 😉😉😉😉😉

[@OutbackKanga]

@@MartinTheVlogger Arrgh you tricked me :( lol . turns out the Rt stock bar is the same diameter as the upgraded f3 Bajaron bar looks like mine is only the stock bar after all :(

[@MartinTheVlogger]

@@OutbackKanga be careful RT bajaron us thicker than F3 bajaron! But you should go wth our H&R 😆😆😆😆

[@douglasmontgomery6315]

Martin, nice job. Guess you, like me will never be a BRP Ambassador :). Truth is what you say...Factory stuff is not ALWAYS the best and manufactures cut corners in many things to save cost.

[@MartinTheVlogger]

Aaaa there are more reasons why i will never be Ambasador even many ppl has said i should as i love the brand, but i say what i want and what i think its truth.. however me being man, straight, from Eastern Europe and white BRP dont give a f.... upps... i did it again..politicaly not correct 😆😆😆😆😆😆

[@Gamefriek07]

Showed my friend my new Spyder F3 LTD and told him that i wanted to change the swaybar at one point, he looked at the original installed one and said immediately to me that this was a very skinny one for such a heavy bike. So funny because i didn't say anything about havy duty ones from your shop.

[@MartinTheVlogger]

:))))):)))))):)))))

[@PSPTommyG]

That German sway bar is one heavy duty fat bottom girl!!! Nice comparison on the bars.... A must for every serious Spyder rider!!!!

[@MartinTheVlogger]

🤟🤟🤟🤟🤟🤟✅️💯😆

[@brettnaysmith3949]

I have a 2020 RTL and have fitted a baja ron sway bar and added elka stage 2 shocks. The difference is night and day. My next new bike will not be leaving showroom before I have the same fitted.

[@MartinTheVlogger]

💯💯💯💯👌👌👌👌 yes also unfortunately shock or springs are terrible on the RT20+ 🙈🙈🙈

[@christopherabram7087]

Your absolutely right. Simply essential part.

[@MartinTheVlogger]

🤟🤟🤟💯💯💯🏁🏁🏁🏁

[@MoeDoe74]

This was amazing thanks

[@MartinTheVlogger]

😉😉😉😉🤟

[@thewebbsace]

Great video, we get ruts in the roads.

[@MartinTheVlogger]

😁😁😁👀💯

[@verdedenim662]

some bars are designed for the haymdahl link and some are designed for solid link. You should definitely talk about them since you're going into the detail about which one works for different riders...

[@MartinTheVlogger]

🤟

[@tomgreen8628]

There is likely some engineering that dictated the rigidity of the stock bar that we are unaware of. Maybe some flex is needed to keep from damaging the front end in extreme situations. The front frame metal is way thinner than I'm happy with.

[@MartinTheVlogger]

🤟

[@feliciawest3052]

I just order mine today

[@MartinTheVlogger]

🤟🤟🤟🤟👍

[@nelsong969]

Sir there is an Australian company called rabbit and they do sway bars and has 2 holes as well

[@MartinTheVlogger]

🤟🤟🤟🤟

[@magnusb6311]

Liked and subscribed

[@MartinTheVlogger]

Thank you 🤟🤟🤟😉

[@brucehoward8349]

I would like to know where you got the handlebars and what size they are?

[@MartinTheVlogger]

They are called short reach and they are oem from BRP and tgey are delivered with the bike when you have F3 Ltd Special Series. I dont like them as for me they are too close to me - I am 6,4 - 6,5 [2m] tall dude. So for rental its OK but on my bike they will go away in October :)))

[@Lwimmermastermetalart]

Martin your videos are always very informative . I have a request for you if you’d be kind enough to help with. I recently bought upgraded Kicker speakers for my 2021 Rt Limited. Purchased from Sling Mods. They always have very good instruction videos but not this time. Admittedly they haven’t made for this year only older models . So my question is just how do you remove the dash to get to the speakers. I REALLY don’t want to pry around not knowing where a clip is. Thank you sir 🤙🏻

[@MartinTheVlogger]

Hi Lee... you know you have used name of the company that is prohibited on my vlog 😆😆😆😆 thin ice warning Sir 😆😆😆 no to be serious, i cannot helo much as i have not done it. You know how it is with me, i buy something and i start to search around and test how to do it a pray that i will not damage anything.. so i am terribly sorry but you must ask - "them" 🤪🤪🤪🤷‍♂️

[@Lwimmermastermetalart]

@@MartinTheVlogger I appreciate your quick response . I get it and shouldn’t have mentioned any names. I should have simply asked if you’ve ever taken a dash off of a 2021. My dealer is a total waste of time and no help whatsoever. All they want is to do the work and charge you insane prices. Im an engineer and will probably figure it out. I was just hoping to get an easy answer . Thx again

[@MartinTheVlogger]

@@Lwimmermastermetalart hmmm... maybe a manual from internet can help... there is official brp service manual for about 40 usd. If i wpuld have one for RT i wpuld share those pages with you.. but as for today i have one for ryker and F3 i think. Sometimes it helps.. dont worry about names i was kidding 😉😉😉😉💯🤟

[@Lwimmermastermetalart]

@@MartinTheVlogger Thank you my friend. I’ll check for the manual on the internet Ride hard, ride custom and ride safe!

[@MartinTheVlogger]

@@Lwimmermastermetalart 🤟🤟💯✅️🏁

[@koretell]

I was just explaining this to someone today. Also city road from the trucks and buses. In one video I watched a dude on youtube and he said this problem is a big deal!?. My first thought was these ruts the trucks make. I'M Looking at these, but Fighting the road all day would suck.

[@MartinTheVlogger]

🤟🤟🤟🤟

[@cashxx]

Where did the decals/racing stripes on the front hood come from? I can find thin ones, but not those wide ones?

[@MartinTheVlogger]

Its custome made wrap job. Any wrap studio can make those 😉😉😉

[@samgonzalez6859]

Where can i buy your product?

[@MartinTheVlogger]

Hi Sam, right over here Here is all for F3 and ST etc www.martinthevlogger.com/wilbers-yss-shocks-swaybars-springs-canam-spyder-parts-accessories here for RT www.martinthevlogger.com/canam-spyder-rt-rt20-swaybars-shocks-springs

[@spsniper1170]

Yup..i have an ultimate baja ron bar kit on my 22 F3SE6 L..its sweet..been on a long fallen vet ride in nor cal.w harley guys...on twistyass roads..it handled awesome

[@MartinTheVlogger]

And try to imagine you have our Heavy Duty PRO version 😁😁😁 and set up to most skilled rYder 😉😉😉💯🔝🏁

[@spsniper1170]

@@MartinTheVlogger is that one better than the baja ron ultimate bar w baja ron ultimate, links..

[@MartinTheVlogger]

@@spsniper1170 well, i dont play politics and if somebody asks i give answer without blsht.. Yes by far 🤷‍♂️🤷‍♂️🤷‍♂️ not sure what is ultimate about that other bar appart from the name. I have Bajaron bars on the shop, they are ok bars we sell them as they are cheaper and ok for less advanced riders... but i refused to buy ultimate bars... I like Ron, but its wrong. This 2piece link design i understand why its used for Ryker and i am fine to sacrifice performance on Ryker bike in return for much more comfy installation... but its complete nonsense for Spyder. Swaybar its about power and how strong it is... 2 link set will newer be as strong as 1 piece set. It has tiny movements that ruine the whole thing. This is just about links.. now our bar is by far the longest one... physics are physics and nobody was so brave as us to move it 4cm longer than anybody else - longer means more control, more sharpness in turning, more noticable "ppwersteering" all its like on steroids... 1.5inch = 4cm.. thinknes and stronginess - we have the stongest bar made in special H&R manufacturing plant using force not heat to build our swaybars. Last not least, 3 setups - 3 holes not 1 but 3 to connect links. - last one its for skilled rYders and we call it SPORT+ its for advanced rYders.. already our middle set up is more sharp than any other swaybar... so ultimate is good bar better than stock for sure, our is,,,, well... better 🤷‍♂️🤷‍♂️🤷‍♂️