Maruti Alto Tachometer (RPM) DIY Install | OEM Genuine | Ritz Tacho | Works 100% | - Autophile MOD#9

[@Autophile]

Download Alto Workshop Manual rhinoman.org/manuals/alto/99500M79G00.pdf

[@SDR702]

Hello, do you have a workshop manual for A-Star?

[@saurabhcent211]

Wow. hope we get to see more mods from you. This is Probably the most detailed mod video of India

[@Autophile]

Thank you very much😃. Surely there is more to come. Cheers buddy.

[@sashikanta100]

@@Autophile Can you please send me connection diagram of 4 pin relay

[@Autophile]

Sure I can share the relay circuit. Do you use insta? Message me @autophileyt.

[@ridexdrive7525]

Can't move to next without appreciating your efforts and clear cut explanation! This was running in my mind since I purchased my alto in 2005. I am still owning it for 16 plus years hoping someday I will see my rpms ! And this video really showed me what is what ! Thanks a tonne Bhai ❤️

[@Autophile]

Hello rideXdrive. Am really glad this video was helpful to you😃. Cheers buddy👍

[@tanmaydhakad1667]

Omg!! This channel is just awesome, it comes up with whatever crazy things my mind makes😅😂😍

[@Autophile]

Hi Tanmay. So glad you enjoy it! Thanks for the support 👍

[@mateomoragarodriguez1691]

I finally found a video for my car. Thank you very much. The process is very detailed, I will soon install a tachometer following your video. Greetings from Nicaragua!

[@Autophile]

Hi Mateo. Really glad the video's helpful. Thanks for tuning in👍

[@vijaysinh8537]

Nobody Can Make Videos Like You ❤ Salute You Brother ❤

[@Autophile]

Hi Vijay. Thanks for tuning in ✌ Thank you so much for your kind words and support! I'm truly grateful for your appreciation. Drive safe 😀👍

[@bakudrasama3471]

Next level video bro 😎

[@Autophile]

Hi buddy. Thanks for tuning in ✌ Really glad you liked it 😀👍

[@the_mcmartin]

Such detailed explanation! This is awesome.

[@Autophile]

Very nice of you. Thanks so much😃. Glad it helped!

[@radhylrajjoseph]

This is actually a installation video should be ..you showed it very well .. 💪🏻

[@Autophile]

Hi Radhyl. I'm really glad you liked it😃. Cheers buddy👍

[@abhimanyudahiya0002]

Dekh ke hi pta chal rha hai Bhot jada mehnat kri hai bhai ne

[@Autophile]

Thanks a lot for the great support 🙏😀

[@atulvashisht3174]

What a clean clear detailed video 👌🏼

[@Autophile]

Really glad its helpful. Thanks for the support 🙏

[@hidayatkhan9744]

Such an informative session and i appreciate for your efforts and research, last and final the way of explanation is simply superb 👍

[@Autophile]

Hi Hidayat. Am really glad that its helpful. Cheers👍

[@ChaitanyaSubhakar]

Hi sir. My car is Maruti Celerio VXI (Petrol) 2017 model. I've checked all 3 links you have given. All the 3 were showing as incompatible for my car. Can you suggest any solution?

[@dhinastark3610]

I 10000% agree with whatever said in this review. I'm new to Fallout and the show got me so intriguing. Move to halo show and I just wanted to give up in second episode but just continued to see how worse it can get, and boy did it get worse😂.

[@shobhitladwal]

Is backlit relay compulsory for this installation in WagonR K-series 2016. Also guide me with some tips before performing this installation. (Awesome Video👌)

[@shobhitladwal]

And where Can I find workshop manual of WagonR K-series 2016 ?

[@Autophile]

Hi Shobit. Thanks for tuning in and I'm really glad the video's helpful 😀 For backlit function (yellow/blue wire), a ground signal is required, which should be supplied only when parking light is on. A relay helps achieve this, taking +ve from IC L7 terminal as its control signal.

[@rithwij]

Great explanation. Thanks dude🎉

[@PANAV_CHAUDHARY]

Hats off bro this can fit in new WagonR 2019

[@Autophile]

Thanks a lot 😀. Wish I had a wagonr to test it. My feeling is that it wouldn't be compatible, since the electrical system has evolved.

[@rashidmohammed3341]

@@Autophile thats it normally youtubers say yes but u said it right

[@Autophile]

Hi Rashid. Have to be Realistic. Really Appreciate the Support 🙏 Thanks

[@bahadurbille7274]

Perfect video with perfect explanation

[@Autophile]

Hi Bahadur. I'm really glad you enjoyed it. Thanks for tuning in. Cheers👍

[@bahadurbille7274]

@@Autophile Can we install this particular tachometer in bike also? Curious to know as Cars have 3 or 4 cylinder engine whereas bikes have only 1. Since you have this in stock, please try it once with any available bike and share observations, also the installation on bikes is pretty because one need to takes the RPM feed from ignition coil only. The overall reason behind is that many RE bikes doesn't comes with Tachometer and this Ritz parts seems really stock and blends in type thing.

[@user-tt6yg8ev9l]

Sir, what about replacing Alto lx instrument cluster with Alto K10 vxi 2012 with few additional wires fixing?

[@mrvk699]

This guy is a Geniune learned man ! An engineer

[@mrvk699]

I want to install a Tachometer in Maruti S Presso. Which should I choose? Ritz Diesel or Ritz Petrol Tachometer? SPresso has 1 Litre K-10 Engine

[@Autophile]

Hi Vishal. Glad you find this helpful and I'm much obliged 😁. Thanks. Prior to tacho selection, would be wise to locate the rpm signal terminal (check EPS module carefully) and test voltage. Once verified, tacho choice depends on preferred color scheme and rpm range.

[@kaushikmanna94]

Very Very Informative video and technical information provided . Love the video a lot.... keep it up bro....

[@Autophile]

😃Very nice of you, Kaushik. Really glad the info's helpful. Cheers👍

[@kaushikmanna94]

@@Autophile welcome bro . Hope other informative video will be updated by you later...

[@adityathota1473]

Nice explanation.

[@Autophile]

Hi Aditya. Really glad it is of your help ✌😀

[@ajaykelvekar5260]

can you make a video on rear wiper and defogger in alto lxi with oem alto vxi type

[@vijaybasuti7391]

Best video for rpm installation in india❣ Just one question is it accurate like genuine one?

[@Autophile]

Glad it helped. Thank you so much, that's very nice of you. Yes, I believe its accurate as long as input is correctly fed, which is the engine speed (rpm) signal.

[@moulaali9]

Man o man superb!!!

[@Autophile]

Thank you 😃👍

[@PawanKumarNandan]

very well explained brother. thumbsup for your information 😍👍

[@Autophile]

Hi Pawan. Glad the video's helpful. Thanks for tuning in👍

[@cleevanalbancardoza1264]

Very nice and detailed video. Thank you for this. Just want to know will swapping the Instrument meter from top end also get the rpm gauge working?

[@Autophile]

Hi buddy. Really glad the video's helpful 😃👍 Now I guess you want to install the instrument cluster from Alto 1.1 VX. I'm not really sure about this swap. To help you get started, I've compared the photos of the two clusters from boodmo website and here are few major observations: 1. The base vehicle remaining same, the mounting points should match. 2. At the back, there are 2 connectors for the LXi which are also present for the VX. 3. For the VX, even though the position of these connectors are different, the terminals count matches with the LXi. 4. We can only hope that the terminal arrangements and the circuitry match. 5. Only difference noticeable is that the VX has a third connector, which is actually left blank for the LXi. So even after swap some features could remain inactive. In conclusion, you should first get in touch with a good auto electrician especially one who works on instrument clusters. Try installing a used VX cluster because a new one costs approx. 5,400 rupees. Good luck and I'll be eagerly waiting to hear about your project ✌️

[@godspeed9969]

Thanks bro, really helpful video.

[@Autophile]

Hi godspeed99. Glad you liked it 😀. Thanks for tuning in👍

[@sunshock4us]

Bhai Great explanetion. Thank you

[@Autophile]

Glad you like it! Thank you very much😀

[@gamz9073]

Very well explained thanks.

[@Autophile]

Hello Gamz. Glad that it's helpful. Thanks for tuning in👍

[@kailasbafna8397]

Bhai Alto mein ELM327 obd device lagake dikhao...Ye work karega ya nahi....

[@autoworld9573]

what awesome quality content bro detailed explanation i had one doubt bro is the tachometer illumination light negatively controlled?

[@Autophile]

Thank you brother 😀. Yes, illumination is negatively controlled.

[@mohammeduwais3798]

Nice 👍🏼

[@Autophile]

Hi Uwais. Thanks for tuning in ✌ Really glad you liked it. Drive safe 😀👍

[@sahils0709]

Wanting to install it in my SS80. How should I?

[@viditctandi773]

Brother...bahut accha mod hai...but mujhe Alto LXI 2011 model m...old VXi ka instrument cluster lagana hai...due to temperature gauge and techometer.. Please help

[@Autophile]

Hi Vidit. Thanks for tuning in👍. In my knowledge, the VXi cluster is not compatible with 2010 onwards Altos. Since the change happened from bs3 to bs4. Even though mounting is same, the electrical connector and wiring harness are different.

[@jamesmartin3865]

well explained

[@Autophile]

Hi James. Glad its helpful😀. Thanks for tuning in👍

[@chamaranuwanrankothge1678]

Thanks

[@Autophile]

Glad it helped! Thanks and welcome😃

[@praveennimonkar7796]

Hi sir....can we install a 2010 model instrument cluster in 2008 model alto

[@Autophile]

Hi Praveen. Thanks for tuning in✌ The 2010 model transitioned to BS4. Even though the cluster mounting remains same, the electrical connector and wiring harness are different. So its not compatible to 2008 model.

[@dixitpatel3088]

Hello ,alto lxi 2009 me OBD lagake rits wale tachometer ke reading same aate hai kya ? I am planning to install rits petrol tachometer if result comes real. So please give reply for it.

[@Autophile]

Hi Dixit. Thanks for tuning in✌ Actually it is much complex to install a tacho that way. Rpm signal from obd port isn't readily available. So first a decoder is required. Even then, we can't be quite sure whether it would work.

[@harshuverma6364]

Bro can we converts alto lxi 2010 odo meter to alto k10 2010 odo meter.......?🤔🤔

[@Autophile]

Good thinking👍. Unfortunately direct conversion is not possible😕. Alto K10 cluster uses a different (wider) connector. Refer links for comparison. Alto BS4 : bit.ly/3DhRcwO Alto K10 : bit.ly/3qDHuS2

[@technicalearth4412]

Sir alto k10 lxi me rpm mitter how fited....??

[@sailorsanjoy]

Hi , great video . Very informative . I want to install a ritz petrol tacho in a carburetted Esteem . I guess the coil negative will not work as the signal input .Whats the alternative ?

[@Autophile]

Hi sailorsanjoy. Thanks for tuning in. 😀✌ Really glad the video's helpful. You may as well try with the coil negative. There's no other way I suppose.

[@sudhakar.electrical.world.]

Waiting

[@Abhishek-mf9jk]

Sir if this speedometer is connected with its coupler to (4 Pin to Obd2 Diagnostic Adapter), then is it working ?

[@Autophile]

Hi Abhishek. Have not tried that method. AFAIK, some sort of decoder might be required. So, preferably the direct method (tapping into the EPS module) would be prompt and convenient.

[@saijuakshaya1983]

Excellent work

[@Autophile]

Glad you liked it. Thank you very much 😀

[@sgam3646]

Is it safe to install after market Tachometer,we have seen dangers of other after market accessories which need electricity to operate .

[@Autophile]

Hi buddy. Thanks for tuning in ✌️ Yes, totally agree with you on that. Would not recommend an aftermarket tacho unless it its from a reputed brand and one is entirely sure about it and follows good practices to install. On the other hand, OEM tacho is very much safe to use because of reliable engineering and construction. Always happy to discuss more. Drive safe 😀👍

[@praveengl6041]

Using this method can i add tachometer to swift type1.

[@Autophile]

Hi Praveen. Thanks for tuning in ✌ Yes, absolutely you can! This tachometer is very much compatible with Swift type 1 model and the same method can be applied to get the tacho working. For a reference, check out this much helpful DIY from teambhp --> www.team-bhp.com/forum/diy-do-yourself/180443-diy-installation-ritz-tachometer-swift-ldi.html Wishing you a seamless installation and an upgrade that adds a sporty flair to your ride, revving up your experience. Drive safe 😀👍

[@narendrasinghgehlot4907]

Bro in Alto lx steering with how to get audio control on steering kindly guide

[@Autophile]

Hi Narendra. Thanks for tuning in👍. To get audio control on steering wheel, you could try installing a remote control like this one -> bit.ly/3XIxEfE. Though, beforehand, make sure your stereo HU has steering wheel controls (SWC) with the control wires (key1, key2). As reference, here's a TBHP thread of a successful DIY -> bit.ly/3ERWktt

[@ishaanbhat4512]

Bro nice video...one question. I own a 2000 Alto Lxi.. does it have a rev limiter or is there a chance of over reving ?

[@Autophile]

Although not sure, since rev limiter is a function of the ECM, typically your car should have it.

[@aswinks8131]

🔥🔥🔥🔥

[@Torq123]

but this is for 4 cylinder tachometer

[@kennethsalo]

Does it have adjustent for differeny numbet of cylinder?😊

[@Autophile]

Hi Kenenth. Thanks for tuning in ✌ This tacho's an OE stock part for the Maruti Suzuki Ritz and it does not have any adjustment. Hope this helps. Drive safe 😀👍

[@praveennimonkar7796]

Sir...kya 2008 model me 2010 ka meter console fit ho skta h

[@Autophile]

Hi Praveen. 2010 model mein bs4 update hua tha. Uske meter ka mounting toh purane jaisa hi hoga lekin peeche wala electrical connector aur wiring harness alag hote hain. Isliye purane model mein woh fit nahi ho sakega.

[@mithunkn2509]

Perfect video..

[@Autophile]

Glad its helpful👍. Thanks for great support🙏

[@anuragsahu7303]

I have Installed RD central lock in my 2009 alto lxi...can u please suggest a way ki remote ke button press krne se boot unlock ho jaye

[@Autophile]

Hi Anurag. I suppose yours is a 4-door central locking system having the boot release function as option (unused). So presently you'll have 4 solenoid actuators fitted for door locks. To use remote and release boot lock, you'll need to first custom install another solenoid actuator inside the boot door. And then wire it up with module. Here's a video of such a DIY installation kzbin.info/www/bejne/joK5e2mlm8-da5o

[@anuragsahu7303]

Thanku autophile ...as shown in video wire used from module is black plus red.... But in my case i cant find that wire in my module...if possilbe do u know any way to find out which wire is for boot release acctuator

[@Autophile]

You could use multimeter to check voltage or test with bulb to know the correct wire while pressing boot unlock button.

[@artistprashantpawar555]

Hello eeco ke liye konsa wala sahi rahega? Please reply

[@Autophile]

Hi Prashant. Thanks for tuning in✌ Anyone of the Maruti tachometers may be installed. All are basically the same except for measurement range and color theme. For Eeco, I would suggest the petrol gauge. Select based on color preference (Astar - black shell + red illumination, Ritz - grey shell + amber illumination)

[@kamarajanraj1190]

super good job

[@Autophile]

Thank you 😀

[@amri4710]

Sir please clarify my doubt .. can we install Alto 1.1 vx meter in 0.8l LXI because it has rpm too. And I have checked the pin connections it is same

[@Autophile]

Hi buddy. It's very much possible to install the 1.1 VX speedo in 0.8 LXi. Do remember that the odo kms don't get carried over and it would start with 0 kms.

[@Red47939]

Can I install in maruti 800 bs3 (2008)model

[@Autophile]

Hello Mr. Shaikh. Thanks for tuning in ✌ Yes absolutely you can install. Mine is also bs3. Hope this helps 😀👍

[@jagdish-nt4rc]

Muje Chevrolet Spark me rpm meter install karna hai..plz guide me

[@Autophile]

Hello Jagdish. Pehle yeh jaanna padega ki Spark gaadi mein rpm signal kidhar hota hai. Workshop manual mil jaye, phir usme se pata kar sakte hain. Lekin tab bhi sure nahi hai ki yeh Maruti rpm meter, Spark mein sahi kaam karega ya nahi. Agar aur discuss karna ho toh Insta par message karna @autophileyt. Ya apna whatsapp no. share kro.

[@rithvikvohra3394]

Hey man loved the video would it possible to share the workshop manual as am unable to find it online

[@Autophile]

Hi Rithvik. Really glad the video's helpful 😀. Here's the link for workshop manual rhinoman.org/manuals/alto/99500M79G00.pdf

[@rithvikvohra3394]

@@Autophile Thank you so much man! I have a 5 speed F8D 800 so it'll be really useful for that

[@pajoedriz3541]

Can you help in finding the RPM signal for Ertiga Gasoline 2017? I cannot find a brown wire where the RPM signal should come from

[@Autophile]

Hey buddy! I suppose that you want to install the OE tacho pod from Astar/Ritz. However, I understand (as per online info) that it won't work as one would expect. For Ertiga and parallel generation models, the electrical architecture has changed. To get rpm signal, you wouldn't find any brown wire in such cars because all the data between control modules is sent via CAN. Hence such tacho cannot be installed in latest Suzuki cars.

[@pajoedriz3541]

@@Autophile thanks for responding. It's a shame that I cannot install the said tachometer. Would you happen to know of any other way for me to install a tachometer?

[@Autophile]

Either you may replace the combination meter from VXi/ZXi, which has rpm gauge and get the odo reading updated. Or you may install an aftermarket tacho of either ignition or OBD type as compatible.

[@yuvalwillenz7805]

loved the vid!! do u think it would work on a alto glx 2015? i just cant find a workshop manual to know if it has RPM sensor..

[@Autophile]

Hello Yuval. Really glad the video's been helpful 😃👍 Presume that your car Alto GLX is same as Maruti Astar? If yes, then you're lucky. This model gets its own tachometer (34200M68K01). You would also need a new dash panel (73311M68K50-P4Z) and bracket (34285M68K00). Refer this TBHP thread for a well explained DIY installation procedure. www.team-bhp.com/forum/diy-do-yourself/180828-diy-tachometer-installation-wagonr-star-lxi.html

[@datastorage9899]

Superb...

[@Autophile]

Thank you 😀

[@thoray368]

Can you do a video for maruti 800 please

[@Autophile]

Sorry buddy, wish I had an 800 car for that.

[@Reda01Reda]

Hi man, I’m not really an expert in relays. Should I use a specific type of relay? And which one do you recommend me? Thank you very much :)

[@Autophile]

Hi buddy. Relay is quite a basic thing. You may get any standard 4 or 5 pin relay, which will do well for this purpose. Here's one amzn.to/3rCDyAh

[@user-bl1pd1oc4d]

Hi, great video. I just finished installing it on A-Star 2010 and found that brown wire... I have issue when idle it show 500~ while obd shows 700~. Reving up the engine the deviation getting bigger. What can cause it?

[@Autophile]

Hey buddy! Really glad you liked it. Ideally, there shouldn't be any deviation if you have installed the tacho, which is Astar specific. Wondering what's causing it.

[@user-bl1pd1oc4d]

@@Autophile installed brand new 34200M68K01 found some 12v after acc and 12v when light is on. Also what weird at me that blue supposed to be illumination for tacho and yellow for the rpm signal but it didn't worked for me and I figured it out and mine blue is for the rpm signal (goes to brown wire to ecs unit under steering wheel) and yellow for the illumination 🤔

[@harshmeetsingh8878]

Sir kya ye tachometer ya koi aur tachometer tata nexon mein lag jaayega? Usme bars aate ha jo ki bilkul ajeeb se ha...

[@Autophile]

Hi Harshmeet. Thanks for tuning in✌ Itni knowledge toh nahi hai magar most probably keh sakta hun ki yeh tachometer tata nexon ke saath compatible nahi hoga. Kyunki alag alag brands ke apne apne electronics architecture hote hain.

[@harshmeetsingh8878]

@@Autophile ok

[@nirmaanbajwa5330]

Bai alto car me kisi or car ka meter fit ho jayega kya

[@Autophile]

Hi Nirmaan. Old Alto, Wagonr aur Estilo mein meter ka shape same hai, matlab common mounting. Aur peeche lagne wale dono connectors bhi common hain. Isliye fitting mein toh koi issue nahi aana chahiye. Magar naye features ko activate karne ke liye wiring harness bhi shayad badalna pade, agar original harness mein saari zaroori wires na hon. Aur naye meter mein odo reset ho jayega, matlab 0 km se.

[@user-uc2im1yo9e]

Hi I have a maruti 800 1996 model petrol carburettor model is it possible to fix it

[@Autophile]

Hi Muthukumar. Actually this tacho need rpm signal from ecu to work. Which is not available in m800 carbureted. So unfortunately it's not possible to fix.

[@user-uc2im1yo9e]

@@Autophile Thank you very much for your kind reply there is any other possibilities to fix other type rpm meters for my car

[@rishiKumar-gi3hc]

Bro I have alto lx 2009 which should i prefer to buy tachometer

[@Autophile]

Hi Rishi. From the 3 oem options, you could choose any which you like since all have similar wire harness and function. Preference comes down to rpm range and appearance. Astar petrol tacho (max 8000rpm) has black shell & red backlight and both Ritz tachos (petrol 8000rpm/diesel 6000rpm) have grey shell & yellow backlight which I feel better suits Alto's cabin theme.

[@MototechWanderer]

A quick question to you, at what RPM is your car redlining ?? Did you cross verify the RPM readings with OBD port reader ?

[@Autophile]

Hello Moto Tech. To be clear, haven't tested either yet. Simply happy about it working, unimaginably so. Also being used to hear rpms, rarely do see tacho. Would say it is typically useful to preempt rough idle. Otherwise exists more as fun factor.

[@MototechWanderer]

@@Autophile Okay ... I have tried the Astar Tachometer... But has a considerable amount of error. So trying to look at other available options. Thanks for the inputs. Your video is very detailed 👍🏼

[@user-bl1pd1oc4d]

@@MototechWanderer did you manage to fix that problem? I have the same issue idle about 500~ when actual is 700~ (tested with obd) reving the engine gain bigger deviation

[@MototechWanderer]

@@user-bl1pd1oc4d I have captured the issue in a video. kzbin.info/www/bejne/i5-pmauJnt-kmbM

[@TravelWithAshwanii]

Can I install in CHEVROLET SPARK

[@Autophile]

Hi Ashwani. Compatibility is doubtful. First of all, locate the terminal for engine speed signal in ECM/EPS module and test voltage at idle/throttle. Should be 0-5V.

[@aadiback]

Good helpfull video

[@Autophile]

Hi Aadi. So glad it is. Thank you😃.

[@mt-ridersumon8343]

Very nice

[@Autophile]

Thank you 😀

[@yourdreamcar6650]

Bhai santro xing ka connection pe or bana do video

[@Autophile]

Hello bhai. Mere pas santro car nahi hai. Aap koi electrical mechanic se pata karlo. Thanks.

[@dakshredhu.]

Bro what if we join the rpm wire to ignition coil, as others do? Plz reply❤️

[@Autophile]

Hi Daksh. Better not depend on that method. RPM signal preferably has to be from ECU which would be regulated voltage. May I ask which car you want to install?

[@PrasannaBSundaresPachi]

You have not yet published roof antenna video

[@Autophile]

Appreciate your suggestion👍. Actually, I have no recording of the customization work. However, I'll soon upload a video explaining components used & installation procedure.

[@rajkumarbhushanaboina7117]

Reare seats adjustble head rest instalation video upload plz

[@Autophile]

Hi Rajkumar. First of all, appreciate your observation. Would be happy to upload DIY install video. But as the backrest is already customized, it is not possible to repeat the process. Would try to share the installation method and tips. Keep in mind that DIY level is 'Difficult'. Suggest to leave it to professionals.

[@sashankraghupatruni4523]

Dude you are a genius!! can i install it in Alto 800 vxi 2021 model??

[@Autophile]

Thanks a lot buddy👍. Hopefully yes you can install!! RPM signal is key. Try to locate brown wire for that in the eps module. Test the voltage for idle and throttle to confirm its the correct wire. Only then go for purchasing the tachometer. Avoid taking the 'ignition coil' route.

[@sashankraghupatruni4523]

@@Autophile thanks a lot for sharing your valuable suggestion brother!! God bless you!! Totally worth subscribing!!

[@ato4900]

@@Autophile hey i own a zen lx it has no power steering so m planning to go the ignition coil route so will it affect my car

[@Autophile]

Ignition coil feed would be raw and unregulated. May cause irreversible damage to the tachometer.

[@ato4900]

@@Autophile then will it hav that brown wire somewhere in the car

[@yashzopdekar1782]

Awesome brother you made very detailed video can you please tell me this RPM meter can I fit in Zen estilo 2010 999cc 3cyl petrol engine please tell me

[@Autophile]

Hi Yash. Thanks. Glad you liked the video. Yes, this tachometer can fit in Zen Estilo. Here's an example from TAI forum bit.ly/3mk3nU4.

[@yashzopdekar1782]

@@Autophile thank you brother ❤️

[@yashzopdekar1782]

@@Autophile hello I have one more question that how is boodmo should I order tachometer from boodmo ?

[@Autophile]

Yes please go ahead. I have bought several parts including tacho without any issue. Only before ordering, confirm the price with local msgp dealer.

[@yashzopdekar1782]

@@Autophile ok. thank you for quick reply

[@harii_xe]

Bro if i install this in my New Alto 800 will it cause any problems like warranty issues due to wire cutting ?

[@Autophile]

No wire cutting involved to install this tachometer. Just need to prepare the dashboard mount, tap into fuse box for 12v, tap into EPS module connector for rpm signal, tap into IC connector for backlight and ground anywhere on metal frame. However, it is said that any sort of aftermarket electrical modification can void warranty.

[@harii_xe]

@@Autophile So this will not cause issues to the warranty Right?

[@Autophile]

Buddy, its a matter of heart or mind🙂. Choose wisely.

[@JonArevalo]

can you also do this in Suzuki Spresso? 2021 model? would love to see a tutorial for that:)

[@Autophile]

Hi Jon. I own just the Alto. If only it were possible to get my hands on an Spresso.

[@JonArevalo]

Or do you have any idea where to get or download the workshop manual of Spresso. Been looking to this document for such a long time now

[@Autophile]

Tried searching, but a downloadable document doesn't seem to be available.

[@amitthaku73]

Bhaiya a star VXI Mein install karna hai manual mil sakta hai kya. 🙏

[@Autophile]

Hello AWORLD. I got the repair manual for Alto from here -> www.rhinoman.org. However, it doesn't have one for Astar. So I think you may have to look for an alternative way.

[@aslamrasheed]

Bro, where do you find the workshop manual? even though my Wagon R (2008) uses brown wire for RPM signal, I need to make sure it is correct.

[@Autophile]

Hi Aslam. Hope you have seen this TBHP thread of Ritz tacho install in Waggy 2003 bit.ly/3vqsJD0. The brown wire in coupler K (grey) is indeed for rpm signal. For workshop manual, here's the site which I followed rhinoman.org.

[@aslamrasheed]

@@Autophile Thanks for the reply, i will check it out.

[@user-vk8jv6bo2t]

Bro which car handle have you installed

[@Autophile]

Hi bro. Steering puch rahe ho shayad. Swift 1st gen model ka hai.

[@swastikrathva3260]

This tachometer can work in Mahindra Bolero???

[@Autophile]

Hi Swastik. Sorry, I cannot confirm that. The tacho needs an engine speed (rpm) signal, preferably from ECU or else from ignition coil. In Bolero, even after connection, the readings might require calibration.

[@Sagr007]

HUM ALTO K10 ka Full meter Lxi ko Paa Skte hei ?

[@Autophile]

Hi Sagr. It's not possible kyunki meter ki wiring alag hai. Old Alto meter mein 2 connectors lagte hain lekin K10 meter mein single connector lagta hai.

[@Sagr007]

@@Autophile ThnQ Ji

[@prathameshsawant9227]

Next mod rear wiper for ALTO F8 🤗

[@Autophile]

Added to bucket list buddy 👍

[@prathameshsawant9227]

@@Autophile thanks 😊

[@jiteshkesarkar3170]

Hello Sir, Will this rpm meter be compatible with Maruti Suzuki Celerio VXI Petrol 2013-2017 model?

[@Autophile]

Hi Jitesh. In my understanding (as per one info on TBHP), this tacho is not compatible with Celerio since the electrical architecture is different. For rpm signal, there isn't any brown wire in latest models, because all the data between control modules is sent via CAN.

[@jiteshkesarkar3170]

@@Autophile Sir any other solution for rpm? My model is Celerio Vxi Petrol Year 2015

[@Autophile]

Can think of only a couple of solutions. Option 1. Replace combination meter with ZXi one, which has rpm gauge (genuine part no. 34104M76M40, MRP price ₹6,270). To update odo reading, you'd need help of local technician who can reprogram it. Better to confirm whether it can be done before purchasing. Option 2. Get an aftermarket tachometer of either ignition or OBD port type installation as compatible. This provides lot of choices and chance for dashboard customization.

[@jiteshkesarkar3170]

@@Autophile Sure, will check Thank You 😊

[@shivamvidrohi]

Brother alto ka manual hai aap par

[@Autophile]

Hi Shivam. Thanks for tuning in✌ The workshop manual is available on this site www.rhinoman.org.

[@nitintyagi1507]

How & where did you get Repair manual?

[@Autophile]

Hi Nitin. Its available online.

[@RahulYadav-ci2qd]

brother without relay connection ho jayega??

[@Autophile]

Hi Rahul. Sirf backlight ke liye relay zaroori hai. Bina relay ke bhi tachometer kaam karega.

[@RahulYadav-ci2qd]

@@Autophile without relay backlight work nhi karegi??

[@Autophile]

Backlight wire ko direct ground se connect kar sakte ho. Magar phir key ON mein backlight hamesha ON rahegi. Relay isliye lagaya h taki parking light ON karne par hi backlight ON ho.

[@RahulYadav-ci2qd]

@@Autophile thanks brother 👍👍 vse on rhne do koi problem nhi h 😊

[@Autophile]

Rahul, ek aur baat. Agar backlight wire ko direct ground se connect kar rahe ho, toh phir 12v power ke liye kisi ACC fuse se connection lena jaise cigar lighter. Actually maine direct 12v se connection kiya hai kyunki ACC se, car off karne par tacho needle wapas 0 ko reset nahi ho raha.

[@prashantsoni37]

Please share service manual link

[@Autophile]

Hi Prashant. A quick search for "alto workshop manual" will suffice (third result mostly). Appreciate your interest 👍.

[@shabbirmalak7879]

Bro Techometer ke saath mount bhi aata hai ? Or we have to purchase from outside?

[@Autophile]

Hi Shabbir. The tachometer base has mounting features. It has 2 snap-fit clips and 2 legs/poles for screw fit.

[@autoworld9573]

hey bro how to do this mod in a 2012 altok10 i coundnt find the wire near eps module

[@Autophile]

Will try to find out

[@Autophile]

So yours is LXi, no tacho in meter console?

[@autoworld9573]

@@Autophile no bro mine is vxi but after watching your video i also want to install one 😀

[@autoworld9573]

hi bro can this be fit on altok10 vxi 2012?

[@Autophile]

Trying to source workshop manual. Can install, but rpm signal wire is the key.

[@ajayjoshy293]

Is it safe to install ? will i be putting my wiring harness at risk ?

[@Autophile]

Hi Ajay😀. Been using it for a while now. No sign of any issue whatsoever. Install it without worry👍 Just one small update: Take the 12v power from an ACC fuse instead of direct supply to avoid battery drain.

[@ajayjoshy293]

@@Autophile Alright thanks man...how much did the fuse tap cost ya btw ?

[@Autophile]

Had bought a set of 3 for ₹300.

[@ajayjoshy293]

@@Autophile thanks man

[@Reda01Reda]

@@Autophile ​ can you give an example of an ACC in the alto fuse box please?

[@mt-ridersumon8343]

Car Central lock video plz

[@Autophile]

Actually, I want to learn it too. But its installed in my car from beginning. Let me think over. Btw do you wish to see DIY video in Alto or other car?

[@redbee9334]

is it works for maruti 800?

[@Autophile]

Hello Red Bee. I think it should work in m800 mpfi by using rpm signal from ecu. But it won't work in carburetor model.

[@redbee9334]

@@Autophile Thnx for your reply....yeah its mpfi model only....where to buy this

[@Autophile]

Can be easily bought from local mgp store directly. Part number is 34200M83KB0. Else order via boodmo. Link : bit.ly/3RaHG62

[@redbee9334]

@@Autophile thank you so much..will try and update

[@Autophile]

Do consider these alternatives as well 34200M83KA0, bit.ly/3IgFJzG 34200M68K00, bit.ly/3GFseJA

[@prathameshsawant9227]

You should have gone for Alto K10 2010 speedometer assembly

[@Autophile]

As mine is BS3 model, think it will not be compatible. Even so, didn't want the odo to be reset.

[@vimallpriti]

@@Autophile which relay use and its wiring diagram? i want Autophile contact number