Simple and easy masking of model aircraft canopies and more with Bare-Metal foil.
Пікірлер: 35
@gorlestondoug10 ай бұрын
Im so glad I saw this video, I always struggle to mask canopies, tape is so fiddly. Thank you for posting another great video.
@lesthiele492110 ай бұрын
Greetings my friend, thst was a fantastic tutorial, I will give it a go sometime soon, very bedt regards from a Kiwi living in Australia
@isolationdisorder6 ай бұрын
“Somebody hep meh… Hep meh.” Hysterical. New subscriber loving the content so far!
@warpedplastic6 ай бұрын
Thank you and glad you're enjoying the channel!
@slotcarpalace10 ай бұрын
I laughed I cried and now it looks like I will be kissing some money good-bye (in a good cause of course! hem hem). Well done as usual old pal. Might be worth pointing out the BM foil will not stick to itself and brand new foil can be a real bast*rd to get off. On the other hand, I just removed the foil from a model that has sat for over 20 yrs and it came off quite well. Gord
@warpedplastic10 ай бұрын
Thanks fella! Hmm... I usually have the opposite experience; foil I purchased recently comes off easily but if I leave it for too long it's a pain to get off. Of course, there's no guaranteeing that anything purchased "new" is in fact new at all - it may have sat in the store or supplier for months.
@Geekman33310 ай бұрын
Easily the best method I've used.
@raytheron10 ай бұрын
Great tip! Thanks!
@LemurKrazy10 ай бұрын
It really is the best method. Convinced myself to use tape for a while due to residue. Back to foil then!
@brianrobinson296210 ай бұрын
Thanks mate just awesome mate
@michaelcooke255910 ай бұрын
Nice technique. Thanks for sharing.
@anthonylichfield354010 ай бұрын
Your cars look great I must try this stuff great channel keep the videos coming all the best from here in the UK 👍
@wkelly305310 ай бұрын
Thanks very much. A roller blade typically found in a fabric store is another good way to cut, though not the best in corners. A curved hobby blade that is rolled along its circumference, rather than being dragged is similar, but I'm coming from the perspective of using stretchy Parafilm. It looks like foil is easier to manipulate.
@1964bc10 ай бұрын
😀 Thank you, this will be a great help.
@garybuchanan310310 ай бұрын
One issue I have found using BMF is that the sheet needs to be fresh, as it ages, in my experience it gets more difficult to remove from the backing sheet and doesn't stick as well to what you are masking. Unfortunately you never know when buying it how long it has been on the shelf at the suppliers and I have gotten sheets that getting the foil off the backer was near impossible. Nice tutorial !
@notanindividual647410 ай бұрын
latex rubber is also a useful and quick way to mask areas.
@markadams546210 ай бұрын
Great masking tip! Now, how does one make pilot figures to replace the generic ones usually supplied in 1/72 scale kits? The generic ones look like they have been modelled off a class's formal graduation photo.
@bugler7510 ай бұрын
I ve used 7air8 -9 graphics 1.1uk and pj1-productions2.4 com5 With great results. Just take out the numbers to get the real address and beat the KZbin algorithm!
@kudukilla10 ай бұрын
Ammo by Mig makes a foil labeled “masking foil”. I’ve been using it as auto trim; going to try it out on aircraft canopies.
@warpedplastic10 ай бұрын
Probably pretty much the same stuff. There have been a few different types over the years, though I have yet to use any other kind that's as thin and flexible as Bare-Metal.
@LemurKrazy10 ай бұрын
Reached it's limit last night with a 1/72 hurricane canopy. Not enough adhesion for really small sections and just slides around.
@MercerAR10 ай бұрын
How does the Bare Metal work on painted surfaces? You mentioned masking wheels, will it pull off the paint?
@warpedplastic10 ай бұрын
Works just fine, I've never had it pull off paint.
@robertmunoz754310 ай бұрын
I'm barely legal to attempt this!😳 Jman
@JETScaleModels10 ай бұрын
You know what’s easier and quicker …cameo silhouette
@BaconbuttywithCheese10 ай бұрын
Have you ever tried super77 on normal foil? I've had some success with it. Leave it to tack up and residue is minimal.
@warpedplastic10 ай бұрын
Nope, never tried that. Sounds like a good idea.
@NielsenDK-110 ай бұрын
Will you tell how you do it, please.
@BaconbuttywithCheese10 ай бұрын
@@NielsenDK-1 Leave it to tack up and residue is minimal.
@ITSREALLYNOTYOURFAULT10 ай бұрын
Yes, but what is that on the wall behind you, over your right shoulder?
@warpedplastic10 ай бұрын
Ummm.... a paint rack? A picture?
@ITSREALLYNOTYOURFAULT10 ай бұрын
@@warpedplastic It looks like you've stuffed and mounted your pet alien. 🙂
@warpedplastic10 ай бұрын
@@ITSREALLYNOTYOURFAULT Ahh, that! Lol It's the alien from Independence Day. Keeps interlopers away from my workbench. 🤪
@slotcarpalace10 ай бұрын
and the link for membership is ...?
@warpedplastic10 ай бұрын
Oops, I have them set up but apparently I needed to click one more button to activate them! Now done and there is a "Join" button on the channel page: kzbin.info/door/hrzhXWwBS5cMtzEsOShrFw