owned an fe35 for 40 years and this happened for the first time, thank you for sharing this tip, cheers!
@sherlock78982 жыл бұрын
Worked for me, never had a tractor finally got a massey 261 and this worked. The parts and location were different but just as easy. opened the cap and stuck my pry bar across and almost no pressure and the problem was solved. looked like a genius. My dad wanted to take it to a shop. Its our first tractor ever so we didnt really know what to do.
@ronniemoses22542 жыл бұрын
Your video helped me to see exactly what I needed to look for and to do. Mine was stuck in second so I had to push on a different gear but the concept was the same. Easy after figuring this one out. MF50
@cryoutformetal80875 жыл бұрын
Thank you for this video. It helped me solve my problem with my MF35!
@wattywattwatt3 жыл бұрын
Thanks. Just happened for first time. Panic over.
@jeffgoth85545 жыл бұрын
Got it to work on my mf65 gas. Thanks for the tip.
@mercedesguy85204 жыл бұрын
My mf 135 is stuck I second gear and this helps a lot
@jesusvera32792 жыл бұрын
Thanks very easy fix
@8tyman84 жыл бұрын
Thanks for the helpful information
@MiniMachines14 жыл бұрын
Glad it was helpful!
@mikkellund63553 жыл бұрын
Thanks. Made my day!
@sekatyoukko693 жыл бұрын
Thanks for the info👍
@MiniMachines13 жыл бұрын
Any time!
@charlesmudd97093 жыл бұрын
thanks this fixed it great video.
@stigmagnusfoss26894 жыл бұрын
Tusen takk for undervisning
@MiniMachines14 жыл бұрын
Bare hyggelig 🙂
@joshualapworth76503 жыл бұрын
Thank you, great help.
@MiniMachines13 жыл бұрын
Glad it helped 😀👍
@joshualapworth76503 жыл бұрын
@@MiniMachines1 yeah, got me going again in 5 min. 😊🚜
@MiniMachines13 жыл бұрын
Next time it's only 2 min😀 I had that problem about 4 times a year on mine. Used it only for snow clearing.
@MikeJuntaman5 жыл бұрын
Thanks my Massey Ferg 40 was stuck in 3rd low moved it to neutral with a screwdriver. I heard put a little down pressure in the knob when you shift helps this not to happen.
@drdavesonntag4 жыл бұрын
My MF40 was in 3rd low today, and now the shuttle shifter will not go into reverse. Hoping something like this will be an easy fix! Glad I did not get stuck in a blind alley and need to back out!
@MikeJuntaman4 жыл бұрын
Dave Sonntag Did the fix work? I've had to move mine with this method a few times I still think the downpressure works too. Should move back I think instead of forward
@drdavesonntag4 жыл бұрын
@@MikeJuntaman will try tomorrow. Where on the MF40 is the location to poke? Btw, have had the MIghty Fricking 40 for a week. Great machine so far. We were digging into an old compost pile with the MF34 loader, found a stolen chopped car that somebody had buried there 4 years ago! We popped it right out with the loader
@strixvaria66384 жыл бұрын
Thanks for the how to fix this
@charleswittmer24774 жыл бұрын
yes but nothing on how to stop it from happening again.
@MiniMachines14 жыл бұрын
I never cared it was such an easy fix to get it out and it happens maby 2 times a year. But it's the balls on the end of the leaver that gets wearn out I as I understand so it was no easy fix.
@backhoeprojects92624 ай бұрын
Mine happened as i was starting to back up i realized the parking brake was on then it would not come out of reverse somehow the extra torque pinched the shifter stuck in reverse. so on mine i opened the inspection hole and pushed the big gear in the very front all the way forward then it was stuck in first instead of reverse, after trying different things nothing would unstick it from 1st so i moved the big gear back to about the middle neutral then the shifter became free again and was fixed . 1st time this ever happened i think ill change oil in that gear box. Keep messing with the big gear thats the answer. I think go easy on the shifter dont ram it around because its old you have to be easy on it. and change your oil in that gear box mine says winter80 summer90. sae