"MASSIVE" TRAXXAS XRT 8s 7mm Shock Upgrade Kit!!!

  Рет қаралды 9,573

Rich Duperbash

Rich Duperbash

Күн бұрын

Пікірлер: 125
@louisrodriguez6499
@louisrodriguez6499 Жыл бұрын
I respect how you spend time with your son, society would be so much better if we had more of that. Anyway great videos as usual, keep the rc hobby alive and well.
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Louis 🤗. I'm so grateful spending time with Andrew 😍. We work out together, fish, hike, bike...etc... and him getting into bashing has been so awesome!!! I suck at Call of Duty and most games so he helps me just like I help him. He actually started my KZbin account years ago. Without his computer savvy I'd still be struggling to figure stuff out 😂
@henningkristensen7446
@henningkristensen7446 Жыл бұрын
.. and new undisputed heavyweight blind landing champion! Andrew! 11:00 😎 Loved this session. big support from Norway😊
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thank you Henning 🤗. Andrew's smile after hitting the big gap made my day 😍
@m2cracing168
@m2cracing168 Жыл бұрын
Awesome bash! Thanks for the punishment! Andrew is really developing fast! Now that he's hit the mega ramp its on and crackin!!!!! Look out pop!
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother Avery 😜. These beefcake shock kits went together beautifully. Gonna be perfect once we sort the oil weight 👌. She took some nasty hits and held awesome. Andrew is making dad proud no doubt 😱🚀🚀. So glad he's consciences and my buddies are giving him tips, very supportive 👍. He's learning at his own pace and really getting his timing down. His huge smile after hitting the Mega ramp said it all 😍
@BarstoneRC
@BarstoneRC Жыл бұрын
That was a lot of fun Rich Andrews killing it out there Great video my friend.
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother David 🤗. Having Andrew out has been such a gift 😍. He's learning fast and gaining confidence. Can't wait to get him back out. 🍻😎💪👊👊
@droningharry
@droningharry Жыл бұрын
It's really nice that Andrew has taken up the hobby big time Rich. He's pretty great as well at it. You guys were making some serious air out there too! Great Video. You're a great teacher to Andrew and it seems like he's loving every minute of it too. Good on you Man!
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so very much Harry 🤗. I'm absolutely thrilled Andrew has taken a genuine interest 😍. The laughs and fun with him is just awesome. 🍻
@MauzyrockRC
@MauzyrockRC Жыл бұрын
Dude! Your bash sessions /test sessions are always so informative and entertaining. Cheers!
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother 🤗. Truly appreciate the kind words. Cheers 🍻
@JmanZ71
@JmanZ71 Жыл бұрын
I would laugh so hard if you ever posted a crawling video lol man you rub things hard! Keep it up!
@mobilizedorb438
@mobilizedorb438 Жыл бұрын
I'm gonna be buying a new xrt roller here soon. No body no wheels no electronics. Gonna go through and give it the works from the start. Im so freaking excited. Been looking for good videos like yours to find the weak links and source outbthe best parts so i can build an absolute monster. Cannot waittttttt
@jeremycravens6973
@jeremycravens6973 Жыл бұрын
Andrew is making it look easy! And he gets to bash orange darling! Good times! I know you enjoy the time with him Rich, enjoy brother you deserve it!
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so very much Jeremy 🤗. Andrew is finding his way quickly out there. I'm trying to give little tips along the way, but he's developing his skills on his own 😍. He can rip Orange Darling anytime so long as he doesn't hit any solid objects 😱🤣🤣
@StevenYDG69
@StevenYDG69 Жыл бұрын
Excellent father son bonding. I will tell you that most of my best memories with my dad have been in RC since I was about 9 years old with an OG Traxxas Stampede till now with all the insane rigs available 👌🤙
@richduperbash2966
@richduperbash2966 Жыл бұрын
That's so awesome Brother 🤗. I hope Andrew is having as much fun as dad. Sharing these times together is just awesome 😍
@kaosr.c
@kaosr.c Жыл бұрын
Love watching the Xrt flying high like that ! Killer upgrades on that beast .... awesome bash 🔥
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother 😜. Yeah the M2C bellcrank and chassis brace have been huge durability upgrades 😍. These massive 7mm shocks are like icing on the cake. Just gotta get the dampening right next run 👌
@GazUK828
@GazUK828 Жыл бұрын
The height them suckers are getting to and landing time and time again and taking the beating is awesome man. and the bond the RC's make between you and your son is nice to see. my son and I always have a great time together on ours
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much my friend 🤗. So awesome to hear about your son and you enjoying the hobby. I'm thrilled Andrew is finally getting back out and developing a true interest 😍. Think he's slowly getting hooked 😂
@GazUK828
@GazUK828 Жыл бұрын
Thanks yeah it’s awesome fun to have together. Andrew looks to be hitting them jumps well too. Keep up the good work both of you 😉
@chadbiermann3380
@chadbiermann3380 Жыл бұрын
Those new shock shafts look like they should hold up!💪 It's nice to see some of your footage with several different rc's in one video. They all handle so differently, but are all fun to watch the way you drive them to their limits!👍🤙💯🤪
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Chad 🤗. I'm stoked Mitch and Avery are tackling the soft spots with the XRT. These shock kits are super beefy 😱. Love getting a mix of rigs out. It's really helping Andrew's skills too driving a variety of trucks. He's really digging the Outcast and MT41O 😍
@chadbiermann3380
@chadbiermann3380 Жыл бұрын
@@richduperbash2966 O4s and the O8s are 2 of my favorite rc's to drive! I always have a smile on my face no matter which rc I'm driving though. They are all fun! 💯🤪😉
@ZeuZLoD
@ZeuZLoD Жыл бұрын
Some sick air with the rigs dude! RDB jr straight killing it!
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother 🤗
@AmpRC
@AmpRC 6 ай бұрын
Are those “Dboot” tires?🤪. Every RC needs a little “Arrma”!🤣 Great vid Rich
@richduperbash2966
@richduperbash2966 6 ай бұрын
Thank you Brother 🤗. Love the original 8s dboots Backflips on the XRT and XMaxx. The more ARRMA the better 😂🤙🤙
@AmpRC
@AmpRC 6 ай бұрын
@@richduperbash2966 and the more M2C the better. 🤣
@Basherqueen
@Basherqueen Жыл бұрын
Cool footage from the D&D bash crew 👍💪
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much dear Kimberly 😍. Stoked Andrew D finally went full send on Ian's Mega ramp 😱🚀🚀. He's running your 7075 BQ bulkhead up front now 💪💪
@saullife87
@saullife87 Жыл бұрын
you bash so hard man and the boy is here for the future great vid rich and hllo from france
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Saul 🤗
@saullife87
@saullife87 Жыл бұрын
❤️🤌🤌🤌🤌spicy meat ball
@NelsRc73
@NelsRc73 Жыл бұрын
Hi Rich and Andrew 🤜🤛 Thank you for all these spectacular bashing actions 💯💪 Hey Andrew you have progressed it's crazy well done it's great that you hang on and share all this with you father 🙏 Hey Rich it sucks for the various breakages on the XRT but at least it allows us to see the weak points when it is driven to the extreme! Can't wait for him to be back for a new session👍💪 my friend, you tear everything down, I love it🤩 ,peace ✌️
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so very much Nel 🤗. Truly appreciate the kind words. Andrew is getting things sorted quicklike. It's so awesome to see him having fun out there!!! 🍻😎💪👊👊
@phillybrc
@phillybrc Жыл бұрын
Andrew D and Dad fickin killin’ it out there! Love the natural terrain you guys are rippin, thats my fave. Damn Vitavon in half? Whoa! 🤜🤛
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so very much Phil 😜!!! I love hitting natural terrain any day. It was a huge disappointment finding the Vitavon top brace busted after our storm bash 😔. Good on them to send a replacement after seeing pictures. 🍻
@davejohnson3474
@davejohnson3474 Жыл бұрын
​@@richduperbash2966 you know you said about the vitavon being hollow underneath why dont you use some JB Weld on it to fill it in
@richduperbash2966
@richduperbash2966 Жыл бұрын
@@davejohnson3474 great idea Dave 👍. I've used their plastic bonder for several other repairs. I'll grab some of their original or SteelStick and give it a try. Appreciate the suggestion 🍻
@rcsmith5909
@rcsmith5909 Жыл бұрын
Epic footage as always brother! It’s great to see Andrew out there with you. Killer . I just got back from San Francisco! Just beautiful there. I didn’t want to come home.😂 Thanks for always putting out good content Rich.
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother 😜. Andrew is building up his skills and confidence 🚀🚀. That's awesome you got out to the city. We're due for a trip to the bay. Appreciate the kind words Brother 🍻😎💪👊👊
@stephanesaucier5820
@stephanesaucier5820 Жыл бұрын
Nice work guys 🤜🤛
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother Stephane 😜!!! Hope all is well 🍻
@captaincouldverc
@captaincouldverc Жыл бұрын
Just absolutely intense footage as usual!
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thank you Brother 🤗
@HawaiircGuy
@HawaiircGuy Жыл бұрын
Brahh what a video!absolutely beast bash day!Andrew is definitely comming along really well,learning from one of the best in the bizness will definitely do that…you can definitely tell it runs in the blood the way he islearning so quick,it’s like his born with it!always funn watching your videos!keep um comming!sending some aloha all the way from Hawaii🤙🏾 bash on brothers🤘🏾😎
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thank you so much for the kind words Brother 🤗. Having Andrew out there has been awesome 😍
@atticusbeachcruise8657
@atticusbeachcruise8657 Жыл бұрын
Good to be back, huh? When will we see the xmaxx again? Sick blast btw
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks Brother 👊. Hopefully get the XMaxx back out again soon. Dropping in a Perfect Pass servo because the 2085X crapped out 😝
@Dos_Rc
@Dos_Rc Жыл бұрын
Awesome sends brother
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother 😜
@darksunridah
@darksunridah Жыл бұрын
Orange Darling!
@richduperbash2966
@richduperbash2966 Жыл бұрын
She's such a Ripper 😱🚀🚀
@G35Jeesh
@G35Jeesh Жыл бұрын
That kraton is sick ...
@troymartin4107
@troymartin4107 Жыл бұрын
I built an xmaxx. I was wondering if you could do a video on installing an M2C motor mount with a Hobbywing 1100kv without cutting the chassis on xmaxx. I am having trouble with my mesh and it’s V’ing my pinion and spur. Scag gears is what I use
@richduperbash2966
@richduperbash2966 Жыл бұрын
Hey Troy 🤗. I'll have to look again, but believe minor modification is necessary to run the 1100kv HW and M2C mount. Pretty sure Avery with M2C posted an install vid on the M2C website. Setting the mesh should be straightforward with the sliding adjustable motor plate and side screws. I'll see if I can link the video. Depending on your gearing, most people have to snip or Dremel the thin plastic chassis cross piece that sits below the rear motor endbell. Otherwise the bigger 1100 won't slide down enough to obtain proper mesh. 🍻
@rcstringuss
@rcstringuss Жыл бұрын
Very nice bash bro💪🏼👊🏻🚀
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thank you Brother 🍻
@brendanoconnor2522
@brendanoconnor2522 Жыл бұрын
Great vids dude! You’re a pilot half the time. Curious which epoxy you use on this machine. Great place to send it too! Lucky bastard.
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks Brendan. I used Gorilla clear epoxy and hot glue with 1/8" thick Kydex sheeting. 🍻
@cmcconn100
@cmcconn100 Жыл бұрын
I'm house shopping out in your neck of the woods. Maybe one of these days I'll run into you when I'm out bashing with my daughter! Any MT410 suggestions for upgrades? I'm building one now... Great video as always.
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Chris 🤗. That's awesome you have your daughter out bashing 😍. Miss having my Angie out there. The M2C Racing CVD tapered driveshafts are a must in my opinion. Stockers are too thin for harder bashing and noodle up. If you're going all in, the Widebody chassis, center brace, and rear brace set-up is the best for hardcore use. Just depends on your needs and budget. 🍻
@Niobium23
@Niobium23 Жыл бұрын
Outstanding! It’s like an insane crab 🦀!
@davejohnson3474
@davejohnson3474 Жыл бұрын
Amazing unbelievable footage no way could i subject mine to that degree but shows how much it can take with mods. I got the beefcake bash bar you were testing as soon as it dropped on the website and abit expensive but got the vitavon hinge pin plates hopefully won't break as much. One thing we do seem to have trouble with here in the uk is front and rear lower chassis's they seem to be out of stock on every website. Are you experiencing the same in the states? If not then why are we!?
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Dave 🤗. I try to push these rigs to the limit to assure the prototype upgrades will withstand punishment. The chassis brace is a great option 😍. I wasn't aware the front and rear lower chassis pods were on backorder. Haven't bought one recently to know the status. Hopefully they come available soon where you're at my friend 🍻
@davejohnson3474
@davejohnson3474 Жыл бұрын
@@richduperbash2966 its ok i bought a lower from germany few weeks back but thats out of stock now but few people on fb are asking if anyones got any lowers for sale. Just wondering if its a european shortage if usa loads of stock but atleast i have the beefcake to keep it together
@viethungnguyen4188
@viethungnguyen4188 Жыл бұрын
Always feel great when watch your video, best basher for me. I’ve built Kraton 8s like your build.full m2c, max5. 2028 motor,... It’s a beast now. Now I want to get a more bashing car, have DBXL E2.0 fully upgraded with aluminum (so can not bash, only speed and race), and Kraton 8s. How about getting one Xmaxx or XRT? Traxxas XRT seems to have the same style as the Kraton 8s, so which one do you prefer for extreme bashing?
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother 🤗. Awesome to hear about your built K8s Beast and DBXL-E 😍. The XMaxx and XRT are definitely both way lighter and handle completely different from each other. Both require considerable upgrading for harder use and better electronics to reach their potential. After getting most weakpoints sorted, I enjoy both. The XMaxx for pure stunting and XRT for speed, drifting, and far superior handling. The chassis's and bulkheads can sometimes break and the gears aren't hardened steel like the ARRMA's, but they are both fun no question 😜
@qwik66
@qwik66 6 ай бұрын
Did you change the springs? Great video!
@richduperbash2966
@richduperbash2966 6 ай бұрын
Thank you Brother 👊. Still running stock springs.
@V8chump
@V8chump Жыл бұрын
Wish they made shocks for something like the e revo 2.0!
@MIHfishing
@MIHfishing Жыл бұрын
What servo do you run? I put m2c bell crank and my 2085x would t turn tires at all. Went to do the washer trick and locknut and pulled the silver piece through. Have you had the steering issue?
@richduperbash2966
@richduperbash2966 Жыл бұрын
I'm running the 2085X with stiffer servo spring (no washer or nut) with screw all the way down. Haven't had an issue with the lighter Backflips or newer belted Masher X HP's. Also running the M2C servo bracket/brace after finding my servo tabs were busted allowing the servo to move.
@MIHfishing
@MIHfishing Жыл бұрын
@@richduperbash2966 wow I did same thing 2085 x tightened it down all way nothing lock but nothing then went back added a spring from welding thick wire on stock bellcrank runs like a champ. I had bad luck with m2c bell crank so I ordered vitivion bellcrank. I was so aggravated took apart ten times. With the spring 2085x comes with m2c says not to use . Finally I did and pulled the aluminum piece through m2c bell crank. Ima reach out to m2c they always have everyone’s back. Have you ever tried promodular servo? Still think 2085x to weak for rough areas to keep tires straight . My xrt looks identical to yours expect stock powersystem . Run the spektrum sr515 receiver.. By the way you send the shit out of your cars I’m trying to get there close but not all the way there.. making huge single with dozer tmmrw sending to field the top of jump is 70 foot from Ground and slope. Trying to get 150 in the air. I’m willing to destroy shit to get there. Rich thanks for the info man. Wish I had luck you had but I didn’t.
@richduperbash2966
@richduperbash2966 Жыл бұрын
@@MIHfishing so sorry for the frustration Bro. I'll definitely mention this to Mitch and Avery 👍. Not sure why they said not to use the heavier spring on the website 🤔. It's worked great for me. I've heard both good and bad with the Promodeler servos. Mostly good with the XMaxx and XRT though. I'm gonna try the Perfect Pass with adapter. The 2085X failed in my XMaxx not long ago. 🍻
@MIHfishing
@MIHfishing Жыл бұрын
@@richduperbash2966 thanks Rich.. ima deff look into it.
@paulrakis
@paulrakis Жыл бұрын
Awesome rich. Great bash brother and amzming upgrades you got on her. Rich I can just order those 24mm m2c hub extensions from m2c? I thought it's just for the xmaxx or a wife kit from what it says. I really need to put those backflips on her.
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother 😜. The +15mm M2C axels and 24mm hexes go together and work on both the XMaxx and XRT. I'm running the same set up on both. It's perfect with the Backflips 😍
@paulrakis
@paulrakis Жыл бұрын
@richduperbash2966 ok Rich thanks brother. When are they gonna make some m2c driveshafts for that beast.
@richduperbash2966
@richduperbash2966 Жыл бұрын
@@paulrakis hopefully soon 🙏. The shafts are a bit flimsy.
@paulrakis
@paulrakis Жыл бұрын
@richduperbash2966 yeah u ant kidding plus for your set up I'm surprised they are holding up you have so much torque with that 1100kv motor . Plus they are long .
@mikec6208
@mikec6208 Жыл бұрын
is there a link to where i can get these 7 mm shock shafts?
@richduperbash2966
@richduperbash2966 Жыл бұрын
I think M2C is about ready to list them on their website. Here's a link to the XRT upgrade parts. The 7mm shock kits (with lower cartridges) will be listed there when available 🍻m2cracing.net/shop/shop.php#!/XR-SERIES/c/141639751
@omega_rc
@omega_rc Жыл бұрын
hey Rich awesome vid! If you had a choice between a fully decked out Kraton 8s vs a full decked out XRT which would you prefer & why? Thanks for your awesome responses always btw!
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much Brother 😜. Although much heavier, the K8s fully decked out is a complete Monster. Definitely my overall favorite. 🍻
@MIHfishing
@MIHfishing Жыл бұрын
What shocks are those or where did you find them
@richduperbash2966
@richduperbash2966 Жыл бұрын
These are prototype shock kits from M2C Racing. Been testing and helping develop parts with them for several years. Testing using takes a few weeks before they go into production and hit the website. m2cracing.net/
@ntwrc3755
@ntwrc3755 Жыл бұрын
How did shafts hold up and what did the end weight you come out with running 80wt and stock shafts bend after 2 runs
@richduperbash2966
@richduperbash2966 Жыл бұрын
So far the shafts are hanging tough. I'm still experimenting, but trying 50 front and 70 rear with the M2C pistons.
@ntwrc3755
@ntwrc3755 Жыл бұрын
@Rich Duperbash perfect can't wait I'm ready to rock n roll with some more death ramp here in the Kansas area
@Paul-jn5rv
@Paul-jn5rv Жыл бұрын
Hey! Did you end up finding weights that you liked? I just bought these and need to decide what weight to run.
@daviddobson20
@daviddobson20 Жыл бұрын
How fast do you think it is with that gearing. I am currently running 32/46 in my with max5 and 1100kv motor.
@richduperbash2966
@richduperbash2966 Жыл бұрын
I'm not sure, but the speed feels very similar to when I was running 32/46. It's almost the same ratio. I just got tired of stripping spur gears before going to mod 1.5 gears. 🍻
@JmanZ71
@JmanZ71 Жыл бұрын
What servo are you running?
@richduperbash2966
@richduperbash2966 Жыл бұрын
I'm running a 2085X for now with M2C servo support. 🍻
@CommanderAstigRC
@CommanderAstigRC Жыл бұрын
That was SICK! Yo!! Andrew D was murdering it out there!😳🔥🤘😍. Vitavon split in half! LoL 🤣. MT410, k8 and Orange Darling appearances was awesome Bro. XRTURD got a bouncy booty LoL 🤣. She needs a thicker lube back there. Another awesome session brother. Keep em coming. My childcare aka mother-in-law 😜 is finally back from the Philippines. I can finally play with my RC again😂
@richduperbash2966
@richduperbash2966 Жыл бұрын
LMAO 😂. Bouncy booty is right 🤣. Thanks so much for the kind words Brother Chris 🤗. Andrew has been digging the stunt trucks big-time. He likes his FT 6s, but I encouraged him to mix it up and he's discovered how wild and fun the shorter rigs are 😍. Glad you're gonna get some help with the kids Bro. Hope to see out bashing again soon 🍻😎💪👊👊
@FarmerFpv
@FarmerFpv Жыл бұрын
Bada**, bro! But don't you ever worry going that fast right by you it hits a rock and changes trajectory into your pee pee then you can't go no more wee wee, sir? 😂😂
@avynnix223
@avynnix223 Жыл бұрын
Thinking of getting a tekno mt410 what do you think? 6s or 4s and what size lipo because I see that the battery box is only 148mm long and all my 6s lipos are 155. What’s your experience with lipo fitment. Or maybe go for 5s? Thanks.
@richduperbash2966
@richduperbash2966 Жыл бұрын
The MT41O is a fun truck and a wonderful build with awesome colored/detailed manual. It handles great with it's racing focused design base. That said, mine is highly modified with M2C Racing chassis, braces, towers, CVD's driveshafts, top plate..etc. Realize the kit comes with plastic motor mount bits, spur gear, shock caps, shock lowers, and servo horn...all of which required upgrading. The stock truck is tough, but overall durability is largely overrated online, depending on your use and expectations. 4-5s is actually just fine with the right power and gearing 🍻
@avynnix223
@avynnix223 Жыл бұрын
@@richduperbash2966 Good to know. It doesn’t seem to be as strong kraton exb which is what I have now. That seems like a bit to much plastic to me to justify the price but I do have electronics for the mt410. I still might get one and just be easier on it which is hard for me to do but I’ll do my best lol.
@johnwayne666
@johnwayne666 Жыл бұрын
🤠🤙🏼
@trashbag8124
@trashbag8124 Жыл бұрын
What’s your favorite car these days?
@richduperbash2966
@richduperbash2966 Жыл бұрын
My favorite is still the Typhon 6s overall 😍
@nickyseitel7971
@nickyseitel7971 Жыл бұрын
You ned js-parts 3d parts, Look ad js-parts❤😉
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks Brother 🤗. I'll definitely check them out 🍻
@danielcseszneki250
@danielcseszneki250 Жыл бұрын
First
@tommygunnz450
@tommygunnz450 Жыл бұрын
Xrt not for me lol just can't justify spending a grand for plastic and terrible ESC and motor
@richduperbash2966
@richduperbash2966 Жыл бұрын
Agreed Tom. She's overpriced for what you actually get... big-time. 🍻
@tommygunnz450
@tommygunnz450 Жыл бұрын
@@richduperbash2966 if they offered a roller 500-600 I'd buy it. It's even difficult to resell their motors and esc's. Arrma needs to put out a 1/5 talion. Love the vids man, as soon as I see you posted I'm right on it!
@tommygunnz450
@tommygunnz450 Жыл бұрын
@@benjaminfranklin9164 I'd never buy a used plastic chassis roller off eBay..
@benjaminfranklin9164
@benjaminfranklin9164 Жыл бұрын
@@tommygunnz450 they are not used they are basically doing what jennyrc is doing which is buying rc cars new breaking it down selling rollers and parts
@clayton8465
@clayton8465 Жыл бұрын
Traxxas. Lost my respect.
@jd111949
@jd111949 Жыл бұрын
Hello Rich You think you would be able to do a video of ur wooden jump ramps u use in videos and how u built them?! I'm new to the RC world and just went and bought the Black XRT about a week ago and here in the next 2 weeks I want to go pick up the Xmaxx too.
@richduperbash2966
@richduperbash2966 Жыл бұрын
Congrats on your new XRT 🤗. If it helps, I posted a ramp overview video from last summer with lots of tips and considerations. I'll try and link you. 🍻 kzbin.info/www/bejne/i37Sfqepmr90eLc
@jd111949
@jd111949 Жыл бұрын
​@@richduperbash2966 Thank you so much for answering me! Definitely subscribed to ur channel. I looked through every one of ur videos yesterday before I asked you about a ramp build video so I didn't waste ur time on a stupid question or request. Not sure how u missed it im sorry. Just finished up watching it on my other device so thank you for all the great videos and tips! Since I have the XRT do u think it would be a waste to get the Xmaxx also? Ever since I seen it sitting on the shelf at the store I just got it in my head I have to have it 😅😅 Definitely got the RC addiction.
@richduperbash2966
@richduperbash2966 Жыл бұрын
@@jd111949 no problem my friend 🤗. The XMaxx handles completely different from the XRT. Definitely a bit tipsy in stock form, but fun as heck with the proper set-up. I prefer my Outcast 8s for handling and overall durability, but all the trucks have unique qualities.
@jd111949
@jd111949 Жыл бұрын
​@@richduperbash2966 Do u happen to have a video on maintenance of these big trucks and how to do it and when it should be done? Like I said I'm new to the hobby and don't know much but would rather learn what to do and when to do it myself and not pay someone else to do it for me. Thank you Rich!
@richduperbash2966
@richduperbash2966 Жыл бұрын
@@jd111949 I've done a few bench videos through the years on diffs and shocks with the ARRMA 6s rigs, but none with the XRT. In general, diff fluid should be replaced around every 20+ runs or whenever there's a suspected problem. Shock fluid can last longer because there's much less heat involved and no gears. Maintaining bearings is a priority, but there's no exact regimen I follow. Really depends on conditions you bash in. WD-40 Silicone Spray works great after driving in wet conditions to keep them alive. Otherwise I bearing oil or replace bad or failing bearings as needed. Kevin Talbot and others have done several how to vids with the XMaxx which uses the same internal gears as the XRT. Doing your own work is the best way to really learn these rigs.
@anitalongass4720
@anitalongass4720 Жыл бұрын
Man, it sounds like the XRT is riddled with problems. Like stuff that really isn’t happening with the Xmaxx at least not to this degree.
@richduperbash2966
@richduperbash2966 Жыл бұрын
I'm not so sure honestly. I busted multiple chassis's, bulkheads, hubs, and other bits with my XMaxx. Think the shock shafts hold better being more vertical, but that's about it. 🍻
True "ULTIMATE" TRAXXAS XRT 8s made Bulletproof!!!
9:20
Rich Duperbash
Рет қаралды 9 М.
$1 vs $1,000 RC Cars!
17:28
Hafu Go
Рет қаралды 1,6 МЛН
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
How does a Tank work? (M1A2 Abrams)
9:49
Jared Owen
Рет қаралды 58 МЛН
The World's FASTEST RC Car they Refuse to Build!
15:47
Tomley RC
Рет қаралды 138 М.
"Simple Budget Upgrade"  ARRMA KRATON 6s EXB V2 Chassis Skid Brace!!!
10:06
How did the Enigma Machine work?
19:26
Jared Owen
Рет қаралды 10 МЛН
"Indestructible?" ARRMA Fireteam 6s 1/7 Basher Bug Unbreakable Body!!!
8:47
"Lil Rocket" ARRMA Mojave GROM 3s Hobbywing Setup!!!
14:31
Rich Duperbash
Рет қаралды 11 М.
"Motivation" ARRMA Outcast 8s EXB RTR  Large Scale Monster!!!
5:38
Rich Duperbash
Рет қаралды 4 М.
THE MEGA KRATON HAS BEEN RELEASED!!!!!!!
2:39
m2c racing
Рет қаралды 3,7 М.
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН