mast tour pro in 2021

this video will cover all the basics you need to know about the MAST TOUR PRO. hope you guys like it, please consider subscribing to my channel for more reviews.
www.aliexpress...

[@kdarban]

Have you had a chance to compare the Tour Pro vs Your Pro Plus? Having a hard time deciding between the two.

[@11BRelo]

Love your content, thanks for what you do!! Helping me make a decision, even though it’s still hard with the budget lol! I know this is an older video, but have you had experience with the original Mast Tour? If you have can you shar your thought?

[@YasmaniRodriquez-k6r]

Hola estoy pensando en comprarme esta máquina pero tengo la duda ya que hay dos muy parecidas la (Mast tour pro plus ) con motor mcore -r1 y la (Mast tour Max ) cuál es mejor en cuanto a motor y versatilidad o cual me recomendarías . 😅

[@chrisdominguez2596]

Hi Tan, how are you? Just wanted to check whether you have plans on making a video about mast tour pro as of today? How is it? How is the perf, is it still good? Etc. Thanks in advance...🥰

[@bdee1084]

How would you compare lining with this machine to the racer?

[@bdee1084]

Does the racer also come with different motors? I noticed there are tons of different suppliers and manufacturers

[@Anotherbirdsoul]

Hey! Hope you're doing well. What do you think about the mast archer? Thnks for the video

[@raulfranciscosantacruzcoro7947]

Hi, man sorry what kind of power supply should i buy for this machine and should i buy a foot pedal? Im new to this

[@Tanstattoo]

Thank you for stopping by, you can buy a power supply, that has a touch screen, those usually don't require a foot pedal. Or you can buy a battery.

[@elmilko]

Sick. Plz do a vid about ur voltage settings with this pen

[@paulinem8694]

Wow, will purchase this machine - Thank you for sharing!

[@lowo7669]

how do I know its the machine with the German motor

[@AndrueSOCAL]

Is it worth it in 2024 for 70$ or a CNC Q 2 short??

[@Lajes-kq3vl]

Mast Flip or mast tour???

[@sevda9919]

Hi do u think this will do good job for nano brows?

[@vapestar3705]

Next time brother first use eletric tape then use duct tape and get ya some pipe wrenches....even when there glued I always wanna see the cam and motor so I always take them apart make sure they are lubed up good and everything

[@Tanstattoo]

Good tip!

[@monomalo7978]

Hello bro amazing videos I think Ive seen all of them on both channels, If you read this I wanted to ask about the new Mast Tour Pro Plus, have you tried it, what do you think of the new motor, ? peace

[@Tanstattoo]

I have not tried it, but trust me it's on my to do list.

[@kdarban]

What do you use to lube the o rings and plunger?

[@AndrueSOCAL]

What about the mast tour pro plus

[@876Tropics]

Where to get the German one?

[@svajunasmiliauskas5936]

Hey, what regular service to take care of mast tour pro. Thanks.

[@Tanstattoo]

Open the machine to clean it.

[@svajunasmiliauskas5936]

@@Tanstattoo no extra lubricant or new O gummi rings in 3 year?

[@Tanstattoo]

@@svajunasmiliauskas5936 yes, I went to home Depot and purchased a variety oring pack. My word of advice is if you need O rings order from dragonhawk.

[@wolfdevils7558]

I have this machine and it’s my favorite machine I own a Cheyenne thunder hawk I love my Cheyenne machine but I’m so use to my mast machine that I use it more 🤣 this is the only machine I would recommend from dragon hawk every other machine they have sucks I have tried the mast archer & lancer and there crap 💩 this machine can line I use a 3RL even 9RL and it works perfect I also use 7mags up to 25 mags and it still handles with no problem:)

[@Tanstattoo]

Thank you for stopping by 🙏 Do you have the German motor variant or the Chinese motor? If you have the Chinese motor then question number 2. How long have you had this machine?

[@laryride5517]

What's up bro! Do you know where can buy it? 'Cause I'm from México City, thanks for review 👍🏽

[@Tanstattoo]

The links are in the description bro.

[@СтасДроздов-ь2ч]

Hey! Does this machine only uses mast pro cartridges or other brands are suitable too? Thanks

[@Tanstattoo]

this machine takes: CHEYENNE STIGMA QUELL HAWINK PEAK WJX V-SELECT CNCPOLICE KWADRON BIG WASP EZ REVOLUTION MAST PRO. I have personally used these cartridges on this machine.

[@andreselflaco1]

Which do you prefer, the mast flip or the mast tour pro?

[@Tanstattoo]

Thank you for stopping by 🙏, I honestly prefer the mast flip.

[@DanielGonzalez-jr2kp]

Xnet titan vs mast... what would you recommend to start with?

[@Tanstattoo]

Titan hands down, because the grip is larger, that will help you punch stable lines. Cheers

[@JoshuaSmith-sb6wk]

Hey tan! First off have to say I love your vids! I just bought the mast tour pro off of Amazon and in the description it states it has a German motor. I have watched a few different yt videos on it and from what I have seen I received one with a Chinese motor in it. I guess they sold the original mast tour pro with a motor that was modeled after a faulhaber but in the newer version they cut cost by using a different motor and they still sell it as having the original German Inspired motor. But my question is does the motor in your mast tour pro have any writing on it? From what I have research the original German motor has writing and the Chinese motor is blank except a plus symbol next to the positive terminal of the motor. Im kinda upset because I specifically bought the one that support to have the original German motor in it

[@Tanstattoo]

Thank you for stopping by, yes mine has faded writing on it, I think it's the voltage settings 260 something, it's faded because I've cleaned my machine with madicide too many times. You can never be too sure when it comes to cleaning. Anyway hope it helps

[@sushinktattoo1366]

I made video about this. Original Mast Tour Pro comes with the writing on the motor. That’s the 6w Japanese motor. The later version and ones that come in the MAX have no writing. They are best for shading and have 4.7w. It also has decent bog. That motor is the same as they put in pens that say “Swiss” motor. Just FYI Faulhaber in CNC is 2w and total crap IMO

[@Tanstattoo]

@@sushinktattoo1366 oh snap I'm going to check it out and drop a sub to your channel bro.

[@Tanstattoo]

@@sushinktattoo1366 dude I told this exact thing to someone in the comments, I can't remember what video, but I had a debate about the CNC machines, it could have been on Facebook. I had the CNC pill the CNC q2 and the CNC xwe and to be honest both the CNC q2 and CNC pill get really weak after about an hour of usage. The xwe doesn't but it's not direct drive, I don't like eccentric wheel for linework. I prefer direct drive for lines.

[@sushinktattoo1366]

@@Tanstattoo thanks man! Mast Tour Pro (original) remains my favorite to the day. Can’t beat that 6w Japanese power

[@zezecamarinha3294]

the cord is shit! the motor lasted 6 months, dont know wath motor was! but i liked the way it tattoed, worked with 6,5 volts max, lined, color and shaded with it! and is very ligth and confortable!

[@sushinktattoo1366]

Bought mast tour pro. Thought could do better. Bought bronc v9. After 10 mins I put v9 to the side and went back to mast tour pro. Best machine I tried so far. Question is it better than the max ? And should I buy the max ?

[@Tanstattoo]

Lol thank you for stopping by 🙏 I did the same with the mast flash. I can't answer your question accurately because i do not own the Max, but the Max is a machine I plan to buy.

[@vapestar3705]

Should have bought the v7 or grabbed the v10 cause my bronc v10 is a daily driver for everything...I can power line with it and with the adjustment on it I can get those soft shading or pack cor with it as well.i put the 3.7 cam in my v10 and absolutely love it.everyone tattoos diffrent but I haven't heard any bad from the v10 from anyone I know who tattoos and has it or has used it

[@kdarban]

Is this Amazon link in the description the German motor version?

[@abbymacneela985]

Does it have a pedal ? Or just the batteries

[@Tanstattoo]

Wireless bro.

[@zoltanpakular4936]

i tryed lots of machines ,this machine is the best i hated china garbage items but its huge

[@robertsojka7262]

Scratches, because aluminium was anoded i think and it is typical for anoded alu.

[@temitope9911]

Based on specific budget Am having a hard time choosing between mast tour and the xnet elite tattoo pen … was hoping you’d advice on which to go for as an overall better perfomer?

[@Tanstattoo]

Thank you for stopping by 🙏, as far as performance goes most Chinese machines source their parts from the same supplier. So performance will be roughly the same. Let me ask you, what style of tattoos do you plan to focus on?

[@temitope9911]

@@Tanstattoo all types basically , also forgot to mention that I love your videos… 🔥🔥🔥

[@Tanstattoo]

@@temitope9911 I'm glad you enjoy them. Are you looking at the Mast tour Pro with the German motor?

[@davidwells6556]

Go to Amazon and get the Tour Max with the German motor. I promise you'll love it. I'm probably to late though. I have machines that cost $800 that I don't even touch anymore. Whatever you do, don't get the Mast Tour wireless. Batteries suck. They jump 1V. Starts 6V, 7V, 8V, 9V, 11V and under each it says 20%,40%,60%,80%,100%. Whoever designed that should be put back in school.

[@tre5895]

@@davidwells6556 thnx didmt kno this

[@hifi8844]

How do you find them mast wireless batteries any good? Compared to something like critical?

[@Tanstattoo]

Thank you for stopping by, I have never owned a critical battery so I can't make a direct comparison, but if you're worried about the machine dropping voltage as the battery drains? Don't I have not encountered that issue the one issue I have encountered is the copper tips at the connections wear out so the battery doesn't sit snug, when that happens I simply press them with my fingers and they're as good as new again.

[@hifi8844]

@@Tanstattoo subscribed too I like this channel very informative. Ok great thanks.

[@chrisdominguez2596]

Hi bro, is this still worth it in 2022?

[@mvnbgns6484]

same question here, coz a lot of comments that i've read somewhere about these machines such as the tour s gen2 and this tour pro gets easily broken 🙄

[@Tanstattoo]

If you can find the German motor variant, it's absolutely worth it.

[@yaanzola8816]

The mast tour pro 1 is more better than Xnet flux?

[@Tanstattoo]

Thank you for stopping by, I prefer the mast tour pro because it's smaller but as far as consistency and hit they are really close, the mast tour pro hits a bit harder. But the Xnet flux is still a great machine. You wouldn't be disappointed with it's results

[@punkvala246]

Hi! I love this machine, but once it fell on the ground and now the stroke is absolutely insame, the needle is all out even when it doesn't work, I tried to open it but it seems to work all fine.. so I don't understand what's wrong now, can you help me some way? thanks!

[@Tanstattoo]

Thank you for stopping by 🙏, honestly I don't understand what you're trying to write. Send me a message on Instagram @tanaostattoo.

[@StJude-ef1mf]

@@Tanstattoo I think he is saying his stroke is stuck with his needle hang all the way out. But his machine still works.

[@carloskoorndijk7898]

Open the machine and check it inside!

[@alexix3533]

Quizás se te aflojó el motor y se movió hacia adelante hecha un vistazo introducirlo bien y apretarlo

[@savannahmoughrabi1316]

Your cute I like your personality 🥰

[@Tanstattoo]

Hello and thank you for stopping by 🙏🤘😆. I am flattered from here to the moon. If you enjoy looking at this mug, check out the other videos I have on other machines.

[@robertsojka7262]

And what about Mast Tour Pro Plus? Did you use it?

[@Tanstattoo]

I have not tried it, DRAGONHAWK and myself are not in the best terms right now. If I'm honest I don't feel like giving away my money to dragonhawk right now.

[@robertsojka7262]

@@Tanstattoo i am confused because i wanted buy one tour pro after your review

[@Jessiem334]

@@Tanstattoo why what happened

[@mytubeyou247]

Great review brother, I have one and im not sure about its volt range. How high can your voltage be on this? Thanks

[@Tanstattoo]

Thank you for stopping by 🙏 The highest I would run this machine is 10 and that can easily chew up the skin

[@mytubeyou247]

Thank you much 🙏 been hearing mixed reviews hope mine holds up like yours.

[@Tanstattoo]

@@mytubeyou247 Did you get the German motor?

[@mytubeyou247]

@@Tanstattoo according to amazon description, yes.

[@RyokoInk]

Hands down the worst rotary machine I've ever used in my life.

[@Tanstattoo]

Thank you for stopping by 🙏 that sucks that your machine didn't live up to your expectations. What issue did it give you?

[@RyokoInk]

@@Tanstattoo Died in less than a month lol

[@Tanstattoo]

@@RyokoInk oh man that sucks, did you get the German Faulhabor motor variant?

[@Techjunkie51]

I have one with a 4mm stroke.

[@Gossiplabhot]

I brought same machine last month . Now its not working. having some error once attached battery. I waste my money.

[@Tanstattoo]

Ouch man sorry to hear that, did you get the German motor version?

[@marynaionutsa3137]

Hey, I just found u and in love with ur videos!!! So u ordered this machine from aliexpress and everything was fine? Just don't really trust Ali so would be grateful for ur reply. And also what battery do u use? (Sorry if u said it in the video and I just missed it)

[@Tanstattoo]

Thank you for stopping by 🙏 I use the dragonhawk batteries, but any battery will doo I found most square-ish batteries are that machines best friend. I did not get mine from AliExpress, I got mine from www.dragonhawkofficial.com but honestly just get it from amazon if you don't like it you can return it. Have you seen my other reviews?

[@marynaionutsa3137]

@@Tanstattoo thanks a lot for answering! As I said I just found ur channel. So I watched this one and the other one where I also left a comment 😅

[@marynaionutsa3137]

@@Tanstattoo but will definitely watch all of them

[@Tanstattoo]

@@marynaionutsa3137 what do you think of the Dragonhawk Armor?

[@marynaionutsa3137]

@@Tanstattoo too many cons for me. The fact that the needle sticks out and cartridge is easy to pull off

[@kdarban]

3:56 *German motor very reliable* ^_^

[@nestorrodriguez4300]

bro no podras hacer este video en español

[@jiapsigomez7730]

127 grams you say??

[@saintlucidVR]

how to service man, thanks for the video

[@Tanstattoo]

I don't understand bro.

[@hulkboy4e]

This is dragonhawk correct?

[@Tanstattoo]

Yes, this is by dragon hawk.

[@tonydavey9084]

is it a direct drive

[@Tanstattoo]

yes it is.

[@hulkboy4e]

Same company German motor? I saw one on Amazon. Yes it's 139.00 like you said but if I got from alliexpress it would be German motor?

[@Tanstattoo]

Yes, just make sure you speak to the seller before making your purchase. Knock out any and every question you might have.

[@tattoo8846]

Awesome review man! hey i am trying to order it online and you've mentioned that you could choose a German motor one, but when i click on the links on this video's description, they both say Coreless motor which in my recollection is the Japanese motor right? Could you tell me where you can order the one with the German motor? Also you have mentioned that you can choose 4.0 stroke instead of 3.6, where could you order one with 4.0? Much appreciated bro

[@Tanstattoo]

Okay so the 4.0 stroke is no longer available I just spoke with the dude at dragonhawk through AliExpress. Also you want to check out the MAST Official Store on AliExpress. The price for the German motor is 158.

[@Tanstattoo]

Someone else from dragonhawk sent me a message and they said the machine is listed as 3.6 for the Japanese motor but if the listing says gean motor then it has a 4.0 stroke on it

[@tattoo8846]

@@Tanstattoo thanks for the reply man. hmm the price for Mast Tour Pro on MAST Official Store Aliexpress seems to be 137.89 USD. Maybe it is leading me to the Japanese motor one. Could you drop me a link to the 158 USD German motor one?

[@Tanstattoo]

@@tattoo8846 I have that link on the video description.

[@tattoo8846]

@@Tanstattoo awesome bro! it's finally arrived

[@jtmisery1145]

You da bidness. I trust your opinions