Master Lock 911 Picked || Factory Bitting Fail!

Master Lock Model 911 Picked and Gutted
Link To Subscribe➜ www.youtube.co...
Thank you for checking out today’s video where we pick and gut a Master Lock 911 and make an observation about the factory bitting for this particular lock. It will make you call into question who something like this can happen!
All in all, the Master Lock 911 is a great versatile lock for everyday application. Just always use your best common sense and realize what you are securing. Correctly pinned this is not a bad basic lock.
Check out The Master Lock 911 On Amazon:
⭢ Master Lock 911: amzn.to/2KIXtpU
You Can Get Started With Your Lock Sport Journey On Amazon!
Get Started With Your Own Clear: Padlock, Dimple Lock, and Disc Detainer Lock! www.banggood.c...
Check Out My Progressive Lock List For An Easier Progression Towards More Difficult Locks.
1. Clear Acrylic Padlock: amzn.to/3qYGZ1z
2. Master Lock No 3: amzn.to/2IPvhV1
3. Master Lock 140: amzn.to/2LiKpbB
4. Brinks 40 mm Padlock: amzn.to/2LcjJcJ
5. Master Lock 570: amzn.to/2LiTQba
6. Master Lock 911: amzn.to/2KIXtpU
7. Commando Padlock: amzn.to/2rWx14W
8. American Lock 1100 Series: amzn.to/2rYGJ6g
9. Master Lock 410 LOTO: amzn.to/2KH0TsW
10. Abus Titalium 80TI/50: amzn.to/2LeI2qm
Check Out One Of The Best Cheap Generic Lock Pick Sets Sold At Banggood.com: www.banggood.c...
Check Out A Beginner Dimple Lock Pick Set On GearBest.com www.gearbest.c...
Check Out The Panavise 350 On Amazon: amzn.to/2rV7OYI
It Is One Of The Best / Most Used Vises For Lock Sport!
If You Would Like To Check Out All The Equipment I Used To Film This Video You Can Easily Find It All On Amazon!
⭢ Canon EOS 90D: amzn.to/2DHcQh7
⭢ Sigma 18-35mm F1.8 amzn.to/2Pp166p
⭢ YoTilon 360°Horizontal Tripod: amzn.to/2S3rEMu
⭢ JOBY GorillaPod Cameras 3K (6.6lbs): amzn.to/2kdpOcB
⭢ AmazonBasics 60-Inch Lightweight Tripod: amzn.to/2Iy9H7X
⭢ Takstar SGC-598: amzn.to/2rYIbWg
⭢ Rode VideoMicPro+: amzn.to/2KxqFRO
⭢ BOYA BY-M1 3.5mm Electret Condenser Microphone: amzn.to/2x0T8MC
⭢ Fifine Metal Condenser Recording Microphone USB: amzn.to/2s4Y0e7
⭢ Bonlux 40w 5,500 Kelvin LED Bulbs: amzn.to/2mGyzNv
⭢ Neewer 176 Dimmable LED Pannel: amzn.to/2S0DB5q
DISCLAIMER: This video and description contains Amazon Affiliate links, which means that if you
click on one of the product links, my channel will receive a small commission at no extra cost to you.
Thank You For All Of The Continued Support By Subscribing, Liking, Sharing, Clicking The Bell!
If you enjoy my content and would like to help support my channel, please consider checking out: www.paypal.me/...
Your fan-funded support will go directly to helping improve the quality of my content. Giving back to the lock sport community is at the heart of my channel, your support will directly help increase the frequency and value of my giveaways. If you would like to contribute items to my giveaways please contact me via email at: [e-mail]
Thank You For Again For All Of The Support!
Thank you for checking out this video! If you have any questions or suggestions please leave them in in the comments below.
If you liked this video and you would like to see more like it, please subscribe, and as always I hope you have a great day!
#HelpfulLockPicker #LockPicking #LockSport

[@foxdie6932]

I worked in prisons for 20 plus years. We almost exclusively used American steel padlocks and Ilco mortise locks. Since Master bought American..things have gone way down hill…fast.

[@HelpfulLockPicker]

Thanks for sharing and that is unfortunate to hear :-(

[@b.vo.]

I don't think master lock knows how to make locks

[@j.gabriel8573]

Not since they quit making the vintage#19

[@HelpfulLockPicker]

Lol, they've had over 100 years now to figure this out

[@eddiec1961]

I think your wrong I think they don't know how to make a good look 😅😅😅

[@AlbertLebel]

Nice work. I figure bitting is just so random that this will happen from time to time.

[@HelpfulLockPicker]

Just surprised the driver pins are so short

[@mediocre_barracuda_356]

Always fun to stumble across these kinds of design "features", I've had similar with cheap Chinese locks

[@HelpfulLockPicker]

Thanks for checking it out

[@JeffMeadowsOutdoors]

I have at least 2 different brands of lock with these zero bitted pins that do exactly as you showed, Thank you for the video explaining it.

[@russej02]

You could cut the (spring) tension with a knife

[@HelpfulLockPicker]

I appreciate that

[@thumperlockpicking9269]

Great job picking this brother

[@HelpfulLockPicker]

Thanks

[@chriscapune7873]

Good video. To bad about the 5th pin ☹️ Stay safe my friend 🐾🐈‍⬛🐈🐾👍👍👍👍

[@HelpfulLockPicker]

Thanks for checking it out

[@jmr]

I make fun of Masterlock constantly but my 911 isn't a bad lock or a bad pick. The heavy tension needed to open it makes it difficult for a novice picker. A common thing you see is this lock picked to open but the picker doesn't know. I hate to see one of the better Masterlocks fail so miserably but there's a reason they are the butt of many jokes.

[@HelpfulLockPicker]

Thank you for sharing. It is nice to see they have be in business for 100 years but sometimes simple things like this make one wonder.

[@aldocoin]

I've only been able to SPP it once, can't repeat it. driving me crazy.

[@HelpfulLockPicker]

Thanks for sharing

[@tomwilliams8675]

Very cool. Nicely done 👍👍🤝🤝🇺🇸🇺🇸

[@HelpfulLockPicker]

Thanks for checking it out

[@scottperson9487]

I picked a 911 one time and the core got stuck open and would not move. Not sure what happened as there was nothing strange during the pick.

[@HelpfulLockPicker]

Did you ever try to take it apart

[@scottperson9487]

@@HelpfulLockPicker I did not. Wish I had.

[@roysammons2445]

That 5th pin should be in chamber one ot two, more effective there.

[@SystemX1983]

yeah, thought the same ... either a position more in the front so it's easily overset ... or a longer driver pin

[@roysammons2445]

@@SystemX1983 🙂👍🏻

[@HelpfulLockPicker]

It would have been nice to have it possibly overseas. Still strange they make such short drivers

[@kevinjack5184]

I have a 6321 on my storage

[@HelpfulLockPicker]

Thank you for sharing

[@titolockpicking9246]

this problem is very common with master lock, I have already had two padlocks from this company which had this defect, one of which had two pins at 0 cut !!! 👍🏻

[@HelpfulLockPicker]

Thanks for sharing 👍

[@unlockeduk]

a zero pin should always be pin 1 in my opinion it can make it hard to set the back ones without lifting sometimes

[@HelpfulLockPicker]

Thanks for sharing 👍

[@garybreuckman9794]

I would think you would want pin one to be a low cut on the key (like a 9 or whatever is the deepest cut on that system) to make it hard to get to the shorter pins behind it?

[@unlockeduk]

@@garybreuckman9794 no a nine cut would be lifted all the way up a zero curt means you dont move it at all

[@garybreuckman9794]

@@unlockeduk you have it backwards, a 9 pin is the longest pin available and is lifted just a tiny bit to get the top of the pin to the shear line, then it's in the way for picking the pins behind it. A zero pin is the shortest possible pin, and needs to be raised all the way up to get the top of the pin to the shear line. Don't believe me? The number 5 pin in the video is a zero pin, and it's a little bitty thing compared to the other pins.

[@unlockeduk]

@@garybreuckman9794 sorry i was thinking on a key a 9 pin would be a zero cut sorry your correct

[@U8uxa8SP]

Nice pick. All Master Locks aren't total garbage. Thanks for the video.

[@HelpfulLockPicker]

Thanks for checking it out

[@jerrycann9072]

Nice video with useful insights. That tool you used to remove the clip - very neat. I'm guessing it was home-made but what did it start life as?

[@HelpfulLockPicker]

Google "Kwikset Pickle Fork" or "Kwikset Cylinder Removal Tool" I am pretty sure you would be able to find the exact one. It is a simple tool but works well.

[@bbtel]

Pin five would be referred to as a “zero lift”? Very cool way to check if a pin needs to be picked by checking how the key pins and drivers line up. Very nice instructional video I learned something new. Thank you for the informative lesson. I am a big fan of the 911 and am currently working on a 911 cL.

[@plazz7235]

Well, sort of, usually the zero lift pins are long enough so they sit flush with the shear line on their own. The driver never really leaves the bible. But here there is also no need to lift it, so it is essentially a zero lift.

[@tigerchills2079]

Actually it's exactly the opposit of a zero lift. The bitting is zero as opposed to maximum cut. Take another look at the key at 3:59 If it was a zero lift, the bitting would make room for the key pin, but instead it is pushing the pin down to the shearline. However, the funny part is: essentially the key pin becomes a zero lift when combined with the driver pin. And I suppose this is just coincidentally. When you have another look at the stacked pins in 8:31 you notice that for pins 1 to 4 you need to push the pin stack into the bible so that they split at shearline with the drivers in the bible. But pin 5, when not touched, is meeting the spring of the driver pin at the shearline. So, with this height setting, the spring of chamber 5 is touching the core as you turn it. Usually you would make the driver pin a little bit longer to prevent that from happening.

[@bbtel]

@@tigerchills2079 precisely! Thanks for the clarification. Makes sense but based on the odd pinning arrangement and security lapse via obvious design error it still becomes a zero lift or call it no touch pin. Those pickers like. I am going to explore the stacking order on some previous opens to see if I have any other no touch design errors. I’m sure i do. Also like the deep cuts where very little touch is required to set. Had fun with an ACE 527 yesterday with a quick minute open. The Helpful Lock Picker is certainly that and I learn quite a bit from the tutorials he provides Locksporters. What’s in your vise?

[@HelpfulLockPicker]

Thanks for sharing

[@objectifymutahar1869]

“This is, the locking picking lawyer, and today I have for you another shitty lock. This lock is obviously garbage because a competent lock picker managed to pick it open.”

[@HelpfulLockPicker]

To be fair, I said this is a reasonable lock to use for normal applications

[@objectifymutahar1869]

@@HelpfulLockPicker yeah which is much better. I was just making a joke about lockpickinflawyer bc this is the first video I’ve seen where you review and pick a lock