Mastercam CAD Tutorial | Designing The TITAN 1M (FREE Resources)

[@gamebredsports7215]

Titan is second to none. This man has done miracles in the Machining/Manufacturing industry in the 🇺🇸. Thank You Titan! BOOM 💥

[@randomness4220]

Hi Titan. Been following your channel for a long time. What u are teaching every day from speeds and feeds for differnt materials to cad to programing, this is unreal. Where i work i had to battle to get to know what i know. Your channel is just awesome. Love it. All the way from south africa

[@duckslayer11000]

I look forward to someday shaking your hand and thanking you for everything you do to positively promote machining and manufacturing.

[@wildin13]

Quick tip from someone who runs mastercam everyday. When you input the hole positions using coordinates, learners may benefit from using XYZ. Example, instead of (.15,-.15) it would be (X.15Y-.15). I found that really useful when learning. Also I know it wasnt effecting this video but when creating additional wire frame (the angled lines and rads in middle) it's good practice to lock in 2D rather than 3D so no geometry can snap to a different Z height and mess up your chaining.

[@flr169]

@wildin13 how do you get the XY origin that Titan snaps to , to start the rectangle ??

[@wildin13]

@@flr169 he is using the auto cursor features. You can see this menu when creating wireframe at the top of the graphics screen (it's slightly faded until you hover over it). The auto cursor menu let's you select what specific type of feature you want to "snap" to (end point, mid point, arc center...) but there should be a small cog next to that drop down menu where you can set the default features to limit what it automatically tries to find. What titan used was the world origin (X0,Y0,Z0)

[@mikeberlinquette9896]

Thanks a lot @wildin13 Got it to work Funny thing I followed that video step by step and things still didn't work like it did on Titans end For example on his Levels page I have different amount of entities compared to him. Maybe I'll go back and do it all over to see if I did something wrong Also when creating the toolpaths for the pockets I get errors.

[@wildin13]

@@mikeberlinquette9896 it may depend on the configuration you're using. You can customise default settings quite alot to each user's preferences. He may have different settings to you. As regards to the errors when generating toolpaths, once again could be a number of things. When it opens the toolpath mastercam will auto fill entry fields and alot was skipped over in this video. Some fields may have a value too large/small for the cutter/pocket size. Also errors could be caused by the tool dimensions. Make sure there are no redundant dimension when creating a tool.

[@mikeberlinquette9896]

@wildin13 The videos are awesome but I think they need to start with helping to set the software and maybe a tutorial on understanding the work around a bit. When I did all the fusion tutorials i found the same problems ...I spent hours and hours researching and trying to find the right video to help. Sometimes it's tough to dedicate all those hours, work and family time I spent 4 months in the hospital last year so I used that time to pound in the hours and hours to learn Fusion ...

[@gptech2444]

FREE Mastercam?? That would've been unheard of only a couple of years ago. I guess if it wasn't for Fusion360 this wouldn't be happening. Thanks Titan for the tutorials.

[@marouanebenderradji137]

but there is no possible commercial use of it since it can't post g code like fusion which means you can't compare the quality of the codes produced by the software probably just did it for marketing and making people familiar with the interface

[@dominic6634]

@@marouanebenderradji137 its pretty good. Most big places use it.

[@marouanebenderradji137]

@@dominic6634 you din't get it the free version of mastercam will generate the toolpaths just like the paid one but it won't post g code that you need to run the machine thats why it has no commercial use for it not like the free version of fusion 360 which can post g code

[@aspeaerospaceprecisionenging]

@@dominic6634 Agree! We use it for very complex multiaxis programming - we have 6 seats (licences)

[@wzhaicthtaarkyer]

The home learning edition has been available since mastercam x2 and probably longer than that.

[@vromerobertoline]

Excellent effort to teach another software, but Fusion 360 has the best approach for educational purposes: Windows and ios native versions, 2, 3, 4 & 5 axis support, open post processors to train students in real programming and customization, cloud based, solid modeling, sheet metal, Finite Element Analysis, etc. All in one software with really no limits in educational version. As always, thank you TITAN for developing the best training materials. CAM software, any brand, is a tool but you make the difference because of your passion for this trade and educational point of view.

[@TITANSofCNC]

We still teach Fusion360 and are editing videos right now... but we are coming out with an Aerospace Academy and Mastercam is ITAR compliant and amazing for high Level Machining.

[@COdrummaCO]

You can’t technically really use Fusion in a ITAR situation. Any real money aerospace jobs, fusion technically cannot do them because of their cloud storage system. MasterCAM you can store your files locally instead.

[@Qui_Gon_Ben]

I'm just tickled pink about this whole new Titan/Mastercam gig.

[@Houcnc]

bsammo amén

[@jaimecruz7275]

More MASTERCAM tutorials!!! Some 5th axis positional/simultaneous toolpaths, 4th axis simultaneous toolpaths!!

[@robertsoso7093]

You can find 5axis tutorials here mate: kzbin.info/www/bejne/gKG6p5udidmUgJo And here: kzbin.info/www/bejne/joLJoKGVZ5umpdk

[@Rstewart43211]

Happy to see you teaching MasterCam. Long time user here

[@Houcnc]

Ryan Stewart mastercam !!! The best

[@sergocam]

@@Houcnc mastercam its silly product its cheap programm

[@curacurika]

Titans is a really good learning site i never get disapoited

[@leviemerick6736]

I’m currently learning about mastercam as one of my courses to become a programmer and I love it. Great software!

[@kaushalprajapati1127]

hey titan...thanks alot for this video...i am so thankfull...please continue this mastercam series. Appericiations from India. 🤩

[@1978jpg]

Super excited for mastercam being taught now. Been using for last year in an aerospace shop. This is awesome

[@conceptsken1]

Hey Titan, wonderful instructions you are helping so many people! I HAVE NO IDEA, HOW YOU FIND THE TIME, TO DO ALL THAT YOU DO!!!!

[@christiannunez8031]

More video on master cam sir ..we never stop learning .boom!

[@rogeliomanjarrez5858]

You are the best thanks

[@manotasmanotas8041]

Greetings from Costa Rica, I am currently studying CNC. I really like your videos and I learn every day. Thank you for sharing your experience.

[@samsonitejones4012]

Titan, I am learning CADD/CAM design setup and programming and just wanted to get your opinion on which program you like better for 3-5 axis machining. Fusion 360 or Master cam? And which on is more robust? Thanks

[@stevenoke9390]

Hi Ryan just my opinion 3 axis machining fusion everyday of the week 5 axis is a bit more difficult i think fusion does a good job but mastercam is much more powerful for toolpaths and surfacing its a lot more clunky / difficult but it will offer you more solutions, fusion 5 axis is definitely getting there try them both

[@loleknabolka]

More movies like this. You are the champion

[@CincyPlasmaTech]

THANK YOU!! THANK YOU!! THANK YOU!! for showing how to clean up wireframe and putting it on another level. I struggled with that. The mask selection tools I knew, but the "change level" from the right click menu, I did not!! If you got Mastercam to sponsor the Titans of CNC Academy, then I predict that the Solidworks plug-in is next.

[@philhagan1253]

I have use CAMWORKS, POWERMILL and FEATURECAM so far as an M.E and have to say POWERMILL is the best for toolpaths but CAMWORKS is the best for intuitive feature recognition. How do you feel this software stands up to other CAM systems you have used?

[@thomaspottie1129]

Thanks, my first design in Mastercam is done ^^, the Titan 1M, just a little difference between the video and the sheets, it's writen " ... BREAK EDGES .020 MAX " , but it doesn't make a difference Thanks for the tutorial, see you soon to programme the titan 1m ^^

[@greyghost1962]

Really like how you explain things...not too fast,not too slow. Mastercam more powerful than Fusion? Love to hear you compare them.

[@TITANSofCNC]

Fusion has streamlined the process and is great for the 80%... but in streamlining, they have taken the artists ability to truly control intricate tool paths... and Fusion is not ITAR. So Mastercam is Amazing for the top 20% and allows you to make incredible tool paths for companies like SpaceX and Blue Origin.

[@Repomam2000]

@@TITANSofCNC How would you rate this against Inventor 2020?

[@Duma86]

Man I’m gonna be so happy when the U.S. goes metric. It will simplify so much and connect with the rest of the world.

[@sebastiantaylor2600]

Good video, very nice Mastercam 2020. I use Mastercam V8 (2000), the last week I started use X7 (2013).

[@LecimyzKoksem]

hey, thanks for all this pro kwnolage. im new in to CNC and I can't fint the solidwork or fusion Titan M1 file to throw in to Mastercam. can I get that file somewhere else then titan academy? thanks for your work!

[@Sara-TOC]

Hello! Thank you for your question! TITANS of CNC Academy was developed with fundamentals in mind. The Building Blocks provide step-by-step instructions that teach students how to create a basic sketch, toolpath, program, and machine similar parts seen in industry. For that reason, we do not offer pre-developed solid models. If you have any further questions regarding Building Blocks or need assistance, our team is very active on both the TITANS of CNC MACHINING Facebook group and the TITANS of CNC Academy Forum. We hope to see you there!

[@joemodesto1808]

Man! Thanks a lot for making these types of videos! Was able to follow along and make this model with your instructions. Thank you! Great content!

[@WyzeOwl]

so after being away from MC since V9, I loaded a Home Learning Edition of MC2020 (to help with a new job op) and immediately looked up pros to help explain stuff. Who pops up in my feeds? - Titan. Tnx Bro. Great stuff.

[@TITANSofCNC]

BOOM:-)

[@policebox1092]

Hi titan Im korean millturn guy I use mastercam millturn Welcome to M cam world~:)

[@KazzArie]

20 min to make a semi hollow brick with some holes, dang. Can’t imagine how much time that complicated aero part you machined (3-4 part series) took to design. This looks like a super cool field to get into as a second career

[@eduardocorrea81]

Very nice, i understand very well, now i go used for my study every day. Good job.

[@joshcommet137]

Great video, I am glad you are starting to make mastercam videos, your training material Rocks! this vid is very easy to learn and follow along with and i hope you keep them coming :).

[@GermanoEllinas]

Hello Titan, i got Programm but i need help in setting up Mastercam like yours looking. Could you make a Setup Video ?

[@bux49]

LOVE this. I started using Mastercam when it was DOS based. Maybe got to version 3. Place I worked would not update. I have been retired 10 years now. I had a retro fit manual milling machine that I programmed using Mastercam. Wish I was still machining. I'm 72 years old now. Does Mastercam offer program for cnc router ?

[@MRnateoriousBIG]

Germany love the academy! Can u start doing this for us in millimeter? Greetings from Europe

[@anthonysilva8686]

Please more mastercam there isnt very many good tutorials on youtube

[@beamonator]

In the UK the main CAM products are either Hypermill or Edgecam.

[@TITANSofCNC]

Both are good. Mastercam is the biggest worldwide by far though... I am teaching both Fusion and Mastercam now to hit 80% of all users.

[@brianrhubbard]

@@TITANSofCNC I just want to thank you for all you do. I watched the prison documentary you made. I joined your Academy and got addicted to Fusion and designing. I am now enrolled at FTCC for CIM. I can not afford any machines and needed to find a way get my hands on one. The school uses HAAS machines but no 5 axis only 3 axis. When I finish my degree I want to learn 5 axis. Do you have a place for students of the Titans of CNC Academy to go and learn more advanced skills and have access to a 5 axis machine? I want to thank you again for the direction your influence has changed my life and many others. Thank you so much.

[@jenspetersen5865]

@@TITANSofCNC Great answer - though I would love to know where Fusion falls short - I have yet to find a single CNC shop in a 200 mile radius of my location in Denmark that use Fusion, and I see the ability to interact with your machine shop as a total change in how you can interact on prototyping and small series production as they can fully become the inhouse CNC shop

[@Limosical]

Don't forget powermill

[@ethancareccia8491]

When I try to save it, it says some solids are in need of regeneration. I try to regenerate it, and it says “No valid closed chains selected for non thinwall extrude.” If someone knows what I’m doing wrong please let me know!

[@aitelmachrouhbrahim583]

Thank you very much for this vidio ....you welcom in morocco

[@barakobamadubai]

Thank you very much Titan, we love you bro.

[@tat2joeelliott]

This is cool. Just started mastercam training.

[@sethtwc]

I'm taking a class with Master Cam, it's a bitch

[@elvira-hd6oh]

The charts at 4:18... would we receive those measurements from the engineers and do we have to do any more add on measurements when we are programming with CAD and CAM? When he's programming the measurements, is he getting all these numbers from the chart(s)?

[@nhel20vlog9]

hello.,it’s really nice tutorial and i love it. can i ask for thus who use macbook for mastercam how to drag or move the workspace using mouse what it the technique that you recommend ? thank you so much and i really appreciate

[@raider1628]

Those set up sheets you show and prints are those mastercam version?

[@TITANSofCNC]

They are from our Academy.TITANSofCNC.com and work with any CAD/CAM

[@aimfg.3395]

Titan, I hope this mastercam series doesn’t take away from the others you’ve promised like art of fixturing/aerospace/5th axis series. I am looking forward to purchasing miteebite kit just waiting on content.

[@LinusBrannstromsEnduroChannel]

Great video i have a passion for 3d CAD design always want to learn more and get the know more about everything 😀

[@ariefsaputra2157]

Hopefully, Titan will see my comment 😀 Hi Titan, my name is Arief. I have known this channel since I was in 10th grade until I graduated, now. since then, I started to enter how to learn cad / cam and operate a cnc machine from Titan Of CNC Academy. But, I have some problems. I live in Indonesia, so we use metric measurements. So, do you guys also make drawings that use metrics? and you will also make how to program it on mastercam, can you also enter the metric size? sorry if my question is too much trouble for you guys. because I really like the world of CNC and cad / cam. and I also want to someday, I want to have a machining-based company like Titan. And last, love what you guys doing👍👍🤙🤙🔥🔥

[@ariefsaputra2157]

Ouuhhhhh.... also all of my friends knew this channel😀😀

[@TITANSofCNC]

Thanks for the great message. We are posting metric in most of our videos and making metric prints for the Aerospace Academy etc. More later Titan

[@graydeath-jy8tb]

More like this man! This is great, even for a Fusion 360 guy

[@СлаваЗеленько]

That's cool. I just thought it would be cool to do the same lessons for Mastercam Before that I tried Fusion 360, and now I started to study Mastercam Waiting for programming lessons!) Boom from Ukraine!

[@tbcyable]

Catia are not bad too!

[@SthrnDrt]

Is Mastercam affordable for a small shop? 4 axis Haas.

[@scythelb5849]

hey im just curious this is an amazing program im use a multicam digital express 5000 series machine i know it just a 2d machine i feel like i can do so much more with this machine and the program is so awesome that mite help does this program work on this machine or am i just better off with the current program im and have to learn for myself which i feel that the current program does support its all just here say i dont know what do u think also have so learn so much from these videos and im cooperated in what i do to figure things out on my own in how i handle my machine going about everything figuring out proper math that suggested in the books on what i have to work with in manuals and stuff anyways just curious is what trying to get at

[@Herbster472]

Finally some decent software! Fudge Fusion! It's buggy as heck! I'll definitely be paying more attention to this channel.

[@panca15]

Sir. I want to lern mastercam 3D. Ussualy i use 2D mastercam. So i want to know about 3D mastercam.

[@vadivel4429]

super sir...please upload more videos. I am interested to learn master cam. I AM WAITING BOSS

[@basharalngar1567]

You have excellent content,Why do not you enter all major world languages?

[@faroukmastercam4395]

big thanks from Algeria

[@ahmednouman5118]

Hey #Titans can you talk me about which software use for designing and programming?

[@russguppy8761]

I'm lovin it. I'm start using Master Cam next week at work. Thank you :)

[@policebox1092]

360 is not ready about multiaxis and millturn

[@SagarplasticindustriesBASIT]

Which Software Is Best For CAD And CAM Both Please Suggest Me

[@catmeta6044]

le escribo desde colombia gracias sera que puede subir mas videos de diseño y programacion

[@tdg911]

Titan, I'm assuming Solidworks is the preferred method for designing/drawing parts and then opening these in Mastercam for the CAM? I've been learning Solidworks and trying to get my feet wet with MC but MC looks a bit clunky for CAD? Would it be an accurate guestimate to say that? I'm moving over from Fusion 360 to SL/MC. Again thank you!

[@dinosoarskill17]

Have you moved away from Fusion 360? The company I work for is tired of the constant upgrade and crashing and are on the look-out for a new software.

[@M.L93]

why now you use mastercam? is it better than fusion360?

[@arneldayto445]

Been using mastercam x5, and excited to try this m1, thanks for this, greetings from PH boowm!

[@007sujesh]

Thanks a lot for sharing.. Comprehensive video.. Easy to learn..

[@jojoladroma4903]

I like dat tutorial about mastercam, i never stop learning because life is always teaching with us..more video about mastercam sir titan....boom

[@FPV-wi8fw]

Really nice clear tutorial!

[@ceng.n.m.lasantha4015]

I am very happy about your great job. I learn lot from you. Thank you very much for your great help.

[@renanbridi7169]

You guys are amazing.

[@smithjan1409]

Very useful video sir. Thank you

[@flovrec1]

Nice tutorial video. Keep movin!!

[@ThomasShue]

What software do you use to make the Reference Sheets ans the inspection sheets?

[@hectorgomez8374]

I've been having problems with this drawing, as soon as I do all all the internal .500 extrusion and finer details and finish save . I cannot seem to open the file the same way all I get is a wire drawing . Why is that? Please need help .

[@propanex8162]

Same as me 😥 did you sort it ?

[@demain8781]

Go to the solids tab in your operations manager and click on the little plus symbol next to "Solid". Then double-click on the extrusion and click on the button that lets you re-chain everything for the extrusion. Then shift-click on the side of the rectangle such that the entire rectangle is selected nicely and hit done. Finally, you can hit the regenerate button on the top of that same solids tab. Now you should be able to save it properly. In case you removed some of the lines when trimming you have to add them back in. Basically, when you separated the lines for the pockets, the extrusion didn't have a nice rectangular chain anymore since you separated them.

[@hectorgomez8374]

@@demain8781 yes thanks I figured it out after posting . Just unbroke the trim line that was extruded and drew a phantom line to rechain it. Or something like that .

[@andrewoates91aus]

Just finished modelling this. Great tutorial, though having issues saving it. I keep getting the error 'Some solids are in need of regeneration'. Went to the solids tab and tried regenerating all of it. No luck. Unsure where to start to fix this!!!

[@misiukowalski5653]

Love it. I like the tutorials you teach personally. Thanks!

[@johnperez1846]

How did you come up with those angle values of 225 & 315?

[@alko4711]

Did you try to use Siemens NX cam?

[@TITANSofCNC]

It’s good but to expensive and difficult for average shops

[@tibseflups6674]

@@TITANSofCNC Any experience with Esprit?

[@williamrice6681]

TITAN you the man but This video helped me very little. i dont know the first thing about mastercam and dont know if my hle download is defective or i am doing something wrong.I dont see the x y coordinates on my screen and dont know how to get it. can do everything up to extrude but cannot place the hole locations.Spent hours watching and trying but same result every time. cant get the program to act like it does in your video.

[@waskito3443]

The notes say filet radius will not exceed .02 yet you make it .195 at 15:49, can you please elaborate on how to read the instructions where you can decide that's the radius I should be going with?

[@pythoncnc2411]

HI SIR nice to learn new thing from you

[@danb8759]

The part where you're breaking the lines to do the outer contour won't work You can't break and re add the line What I've found is you have to extend those lines and then add a horizontal line to them . You can do it your way but try to save the file you can't . Unless I'm missing something then it has to be done this way . The lines I'm speaking of are the 225 deg and the 315 degree lines . If you break the original contour line you can't save the solid part it will create an error . Ps not all of have 2019 or 2020 so the Hole add on solids was only put in as of 2019 I use 2018 . Ps awesome videos I will do the whole thing as I'm still learning thanks so much .

[@jonathanbohm6438]

thanks i was just running into this problemm, driving me nuts

[@fernando651]

Nice and thorough, pro presentation! thanks T

[@smithjan1409]

Waiting for the next video man,,,

[@ibrahimshareef4743]

Thank you sir. I am looking forward for cam video of Titan 1m in mastercam.

[@stevenhorgan8782]

have you ever used soildworks and soildcam titan ? love to see vidios on that great content

[@TITANSofCNC]

Ya, you can get it for $20 on our Academy

[@stevenhorgan8782]

@@TITANSofCNC thanks very much 😁👌

[@badrdyar3973]

Thank you for this vedio is very interesting keep going we want part 2 Thanks

[@MirzamalikJurakulov]

Super

[@ethanclosuit4876]

This was extremely helpful, thank you very much!

[@ZaReTV2]

Can any tutorial for PTC Creo - pro engineer. Also a very good program for CAD, CAM ....

[@aaronleon1277]

Hello this might sound like a dumb question but how do I rotate my part in a 360 view, I tried going to the view tab and press rotation position but still can’t rotate my design I’m a beginner by the way

[@lukebond7898]

Is there any chance you could release all the resources in metric

[@law2755]

does the master cam software work with the Linux software or Linux with wine

[@matshengamatshe]

Thank you so Titans.

[@alvinfattahudin5901]

I am for indonesia :) I like your video's

[@seraphimcombat4884]

for some reason in mastercam home it will not let me turn it after I do the solid, any reason why that is ?

[@vidittandon7719]

Why have we changed the diameter to 0.177? I see in the setup sheet it is mentioned we will use 0.177" drill but for the tap in the print it says 10-32 which is 0.159" I am a total newbie and would appreciate any and all help!!

[@johnperez1846]

Roll Taps require a larger drill size.

[@helenhenry26]

My masterCam 2018 doesn’t have “Hole” on Solids tab (like 4:08 of video). How can I get that “Hole”?

[@Masoud_Amiri]

I prefer Powershape + Powermill to Mastercam