Mastercam Machine Simulation HOW-TO BUILD A MACHINE BASICS!

[@Krispykashew]

Thank you very much for this video. It was very clear and easy to follow for building a basic sim for our UMC1000. Thanks again!

[@aniktive713]

Fantastic walkthrough! Thanks for this vid.

[@scottprints]

Thanks for all the effort that you put into this video; it was very informative!

[@hichamelmoutawakil7617]

Thank you for this video

[@malachilandis9542]

Thank you for this! Now I've just got to go measure my machine, make the geometry, and put it all together...

[@douglasfoss3260]

Nice video BUT... At 17:45 the video jumps over the part where you add and define the tool holder. Later on around 28:05 you mention this was done BUT it is not actually shown anytime in the video. Can you add this important step?

[@scumtacular3611]

Yeah for real, nice little shady jump there. I am guessing it is similar to the step where you add the dynamic workpiece since there is another selection for tool. I am working on the rest of the machine so when I get to that part of the sim I think its just a matter of adjust the location of the holder where it should sit in the taper of the spindle.

[@hienaz723]

that really helpful tutorial thank you

[@9955CAM8]

it's wonderful

[@pako_tube6898]

Thank you very much for this video, but I have a problem, when I press on the machine simulation, a window appears to me and mastercam closes, please help me

[@gtcollection6933]

That's a nice intro to Mastercam and sim. One question, are those sim machines real NC based/driven or just video game-like sim?? I've been trying to find out as I plan on doshing quite a bit in CAM and looking for a real NC sim package rather than the fake kit most sells. Thanks

[@tomaszo7557]

Thank you for this video. I started building a horizontal milling machine and having some problems with setting up the machine within wcs. Any suggestions?

[@policebox1092]

Awesome Thank you