You sir , have saved my life. Thank you!!! I have now completed the last feature of my final. I knew it was a chamfer but I did not how to create the larger cut and at what depth. You have showed me an easier way that worked great!!! Thank you so much.
@kentdmt4 жыл бұрын
Thank you anh Giang for sharing all of your videos with us! The world needs more generous people like you!
@tonytieuli60217 жыл бұрын
I've used your 2D method to cut several large chamfers.This way is even easier!Thanks!
@chazz.zaragoza.95615 жыл бұрын
I love all of your tutorials, been programming for a couple months now using a lot of your tips. Been helping me step my game up making aerospace parts :)
@GizmoTheGreen2 жыл бұрын
this was what I needed, it looks a bit different in mastercam 2022 but I found my way around. thanks!
@stmboat4 жыл бұрын
This source is phenomenal.
@Carbide867 жыл бұрын
Awesome! great explanation, I've learn lots of trick form you. Thanks for sharing.
@Camborambo17097 жыл бұрын
Very good tutorial man good job
@jelle1914 жыл бұрын
How do you get the chamfer in the first place? This is only finishing
@victorolguin4 жыл бұрын
How would you do this from a solid square piece of material? Great video by the way
@kentdmt4 жыл бұрын
He's already mentioned about roughing the chamfers before finishing with a chamfer tool in the video.
@phantienhung936 жыл бұрын
Thank you That’s the one I’m looking for
@kosmoscol4 жыл бұрын
Thank you!
@ericbilodeau69773 жыл бұрын
Can we put an bottom offset on the tool... so as not to have any burrs at the bottom of the chamfer???
@Hanal5035 ай бұрын
😅😅😅😅hahaha.....man use ball bose there for a lovely surface. .do not believe any shit😅...you do not need any offset😅😅😅
@cymancini85315 жыл бұрын
Giang ; you are wunder ba, good job
@Frankyouknow7 жыл бұрын
Great presentation! Question, can you recommend a good surface toolpath for machining side walls from 0-90 degrees with an up and down motion on the z-axis?
@GIANGTHETOOL7 жыл бұрын
Do you have a picture of the surface?
@Frankyouknow7 жыл бұрын
GIANG THE TOOL No I'm not at work today so I can't provide you with a picture. Basically what I want to machine is the corners of a pocket that has a 1/2 inch radius and reduce it to a 1/8 inch radius. The pocket is deep that's why I want the cutter to go up and down. One way because I'm limited on flute length and a don't want the cutter to snap off if you know what I mean. I would like it to work as a ruled toolpath but on a solid.
@GIANGTHETOOL7 жыл бұрын
take a look on this if this is what you want to talk about: kzbin.info/www/bejne/Y6uYc6Khl8arlaM normally I will use a flowline for the finish cut
@Frankyouknow7 жыл бұрын
Thank you
@zvsgera3 жыл бұрын
+ Gap settings - Tangential line length ~3
@黄泽明-u8r7 жыл бұрын
Awesome!
@GIANGTHETOOL7 жыл бұрын
Thanks mate
@bsw96335 жыл бұрын
Can you make the tool go past the cut surface??
@jasonwilliams67715 жыл бұрын
in fusion 360 its called a tangential extension!!
@bsw96335 жыл бұрын
@@jasonwilliams6771 lol. Thank bud.
@vantinhchu60095 жыл бұрын
very good thank hero
@elsunshine99767 жыл бұрын
very useful
@medmdimagh42807 жыл бұрын
a big thanks broo
@romlef5263 жыл бұрын
Very good :) :)
@canhtran71424 жыл бұрын
tôi cũng muốn giỏi tiếng anh chuyên nghành như bạn. bạn có thể tư vấn giúp mình ko ạ
@thanhtamnguyen68625 жыл бұрын
Anh Giang ơi làm thêm phần phụ đề.em không hiểu tiếng Anh
@angel20105127 жыл бұрын
exelent
@jenacbxx7 жыл бұрын
thumb up is not enogh. pls KZbin add another butto. :) tysm
@GIANGTHETOOL7 жыл бұрын
thanks mate :D
@failo19787 жыл бұрын
GIANG THE TOOL Hi i been watching your videos to learn more about mastercam im using mastercam x9.. I have a part that maybe your are intetested in making a video of it.. its a jet boat impeller. if can explain how to rought and finish the fins. my e-mail is gaytan1978@ hotmail.com are intetste email me and i send u the file..
@asepginanjar38684 жыл бұрын
Blurr view.
@tambinhan33906 жыл бұрын
Sao a k ns tiếng việt để cho ng việt học ạ
@GIANGTHETOOL6 жыл бұрын
Sao ko học tiếng Anh đi bạn
@tambinhan33906 жыл бұрын
@@GIANGTHETOOL tiếng a khó quá học mãi k vào a ạ. Vẫn mong a làm nhiều video tiếng việt để ng việt cùng phát triển
@thanhtamnguyen68625 жыл бұрын
Anh Giang ơi làm thêm phần phụ đề.em không hiểu tiếng Anh